Aube Technologies Ti040 Users Manual 400 040 001 Industrial Indoor/Outdoor Timer

TI040 to the manual ac2e7ae5-4a96-457e-8918-66d6e8b10bab

: Aube-Technologies Aube-Technologies-Ti040-Users-Manual-500560 aube-technologies-ti040-users-manual-500560 aube-technologies pdf

Open the PDF directly: View PDF .
Page Count: 2

TI040 400-040-001-A 15/1/07 1/2

TI040

Installation and User Guide

Industrial Indoor / Outdoor Timer

nCut power at the circuit breaker to avoid electric shock.

oPerform the connections as shown on the wiring diagram.

NOTE: For a 3-way installation, connect a standard single-pole

switch to the 3-way terminals of the timer as shown on the wiring

diagram.

pSelect the proper operating voltage.

qApply power at the circuit breaker.

At power-on, 0:00 will flash. Otherwise, press reset using a paper

clip. If the display is blank, verify the power supply.

NOTE: The switch displays the time in 24-hour format by default or

following a reset.

nTo change to 12-hour format (or vice versa), proceed as follows:

a) Press the MODE button to ensure the MAN or AUTO indica-

tor is displayed.

b) Press the MIN and HOUR buttons simultaneously and briefly

(0:00 display = 24-hour, 12:00 display = 12-hour).

oSet the time using the HOUR and MIN buttons. If you have

selected the 12-hour format, ensure that PM appears on the

screen when an afternoon time is displayed.

pSet the day by using the DAY button.

qPress the MODE button to return to normal operation.

The programmable switch has 2 operating modes: manual (MAN)

and automatic (AUTO).

To switch mode, press the

MODE

button for 3

seconds.

Manual Mode

In Manual mode, the timer operates like a regular switch. Briefly

press the MODE button to activate or deactivate the load. (If you

have connected a remote switch to the timer for a 3-way installation,

the switch can also be used to activate or deactivate the load.) The

mode indicator (MAN) and the state (ON or OFF) are displayed.

Automatic Mode

In Automatic mode, the timer follows the programmed schedule (see

section 6). The mode indicator (AUTO), the state (ON or OFF) and

the current program number are displayed.

To temporarily override the programmed schedule, press the MODE

button or use the 3-way installation switch (if connected). The new

nApplications 1.

Load type Maximum load Examples

Resistive

load 30 A

• incandescent lights

• halogen lights

• block heater

Inductive

load 10 A

• fluorescent lights

• compact fluorescent lights (CFL)

• sodium lamps

• electronic ballasts

Motor 1.5 hp @ 120 VAC

2.0 hp @ 240 VAC

• pool filter pumps

•fans

oInstallation 2.

Power supply

(120/208/

240 VAC)

Single-pole switch

(for 3-way installation)

Line voltage

selector

switch

Motor

Lighting

pPower-On 3.

qSetting the Clock 4.

rSelecting the Operating Mode 5.

• Briefly press the

button to turn the

load On or Off.

• Press the button for

3 seconds to switch

between Automatic

mode and Manual

mode.

Mode display On/Off display

Program number

400-040-001-A ENG.fm Page 1 Monday, January 15, 2007 8:36 AM

TI040 400-040-001-A 15/1/07 2/2

state indicator will flash to show that this state is temporary. The

override remains in effect until you press the MODE button (or use

the remote switch) or until the beginning of the next program.

You can set up to 7 programs. To set a program, you need to enter its

start time (ON) and its end time (OFF).

oPress the PGM button to display a program and its On or Off

time. For example, when you first press PGM, program number

1 (P1) and its On time (ON) will appear. -:-- will appear instead

of the time if the program is not set (inactive).

pPress the DAY button to select the day to which you want to

apply the program.

NOTE: If you want to apply the same program to each day of the

week, press DAY until all the days are displayed. (This still

counts as 1 program, not 7.)

qPress the HOUR and MIN buttons to set the ON time (time when

you want the lights to turn on). If you have selected the 12-hour

format, ensure that PM appears on the screen when an

afternoon time is displayed.

rAfter you have programmed the ON time, press the PGM button

to display the OFF time (time when you want the lights to turn

off).

sRepeat steps 3 through 5 to program the OFF time.

NOTE: If you have used only one program to set the ON time for

all 7 days, the OFF time of that program will automatically apply

to all 7 days.

tTo set another program, repeat steps 2 through 6. Programs that

are not set will remain inactive.

uPress the MODE button to return to normal operation.

Clearing a Program

Press the PGM button until the desired program is selected. Hold the

PGM button for 3 seconds. -:-- appears when the program is

erased.

Supply: 120/208/240 VAC, 50 / 60 Hz

Maximum load: See section 1

3-way input: Requires a dry contact

Operating temperature range: -40 °C to 50 °C (-40 °F to 122 °F)

Enclosure type: 3R

Certifications: CSA & UL

Power outage: The programs are protected by a rechargeable

battery. The screen is blank during the power outage.

AUBE warrants this product, excluding battery, to be free from

defects in the workmanship or materials, under normal use and ser-

vice, for a period of three (3) years from the date of purchase by the

consumer. If at any time during the warranty period the product is

determined to be defective or malfunctions, AUBE shall repair or

replace it (at AUBE's option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to

the place from which you purchased it, or

(ii) contact AUBE. AUBE will make the determination whether the

product should be returned, or whether a replacement product

can be sent to you.

This warranty does not cover removal or reinstallation costs. This

warranty shall not apply if it is shown by AUBE that the defect or mal-

function was caused by damage which occurred while the product

was in the possession of a consumer.

AUBE's sole responsibility shall be to repair or replace the product

within the terms stated above. AUBE SHALL NOT BE LIABLE FOR

ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCI-

DENTAL OR CONSEQUENTIAL DAMAGES RESULTING,

DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR-

RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF

THIS PRODUCT. Some provinces, states or regions do not allow the

exclusion or limitation of incidental or consequential damages, so this

limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE

MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS

HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS

WARRANTY. Some provinces, states or regions do not allow limita-

tions on how long an implied warranty lasts, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and you may have other

rights which vary from one province, state or region to another.

If you have any questions on the product installation or operation,

contact us at:

705 Montrichard Avenue

Saint-Jean-sur-Richelieu, Quebec

J2X 5K8

Canada

Tel.: (450) 358-4600

Toll-free: 1-800-831-AUBE

Fax: (450) 358-4650

Email: aube.service@honeywell.com

For more information on our products, go to

www.aubetech.com

sProgramming 6.

tTechnical Specifications 7.

;Warranty 8.

Customer Assistance 9.

TROUBLESHOOTING

400-040-001-A ENG.fm Page 2 Monday, January 15, 2007 8:36 AM