Aukey E Business EP-B60 Bluetooth Headphones User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3614343
Application ID	kOoBJjIBQOio3vrQdja9GA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.64kB (220453 bits)
Date Submitted	2017-10-23 00:00:00
Date Available	2017-10-23 00:00:00
Creation Date	2017-10-20 16:21:50
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2017-10-20 16:21:50
Document Title	Microsoft Word - EP-B60 说明书 英语.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ntek136

User Manua
Wireless Headphone：EP‐B60(FCC ID ：2AFHP‐EP‐B60)
Thank you for purchasing the AUKEY EP‐B60 Magnetic Wireless Earbuds. Please read this user manual
carefully and keep it for future reference. If you need any assistance, please contact our support team with
your product model number and Amazon order number.
Package Contents
MagneticWireless Earbuds
Micro‐USB Cable
Three Sets of Ear‐Tips (S / M / L)
Three Pairs of In‐Ear Ear‐hooks (S / M / L)
Carrying Pouch
User Manual
Warranty Card
Product Diagram
Volume + / Next Track
Multi‐Function Button
Volume ‐ / Previous Track
LED Indicator
Microphone
Micro‐USB Charging Port
Specifications
Model
EP‐B60
Technology
BT 4.1, A2DP, AVRCP, HSP, HFP
Driver
8mm(D) x 5mm(H) / 0.31”(D) x 0.2”(H)
Impedance
16 ohm
Sensitivity
95±3 dB
Frequency Range
20Hz –20kHz
Microphone Noise Reduction
6th generation cVc audio technology
Input
DC 5V
Charging Time
1.5 hours
Play Time
8hours
Standby Time
120 hours
Battery Type
Li‐Polymer (2 × 60mAh)
Operating Range
Up to 10m / 33ft
Weight
15g / 0.53oz
Getting Started
Fully charge your earbuds before first use. Before charging, make sure the earbudsare turned off. Tocharge,
simply connect one end of the micro‐USB cable to a USB charging port and the other end to the input port
on the earbuds. When the red LED indicator light turns blue, your earbuds are fullycharged and ready for
use. Charging takes around 1.5 hours.
Turning On/Off
●To power on, press and hold the multi‐function button for 2 seconds, and the LED indicator will flash
blue
●To power off, press and hold the multi‐function button for 5 seconds, and the LED indicator will flash red
and then off
Pairing
Starting with yourearbuds powered off:
1. Press and hold the multi‐function buttonfor 5 seconds until the LED indicator flashesblue and red
alternately
2. Turn on the pairing function of the device you want to pair with the earbuds
3. In the list of available devices, find and select “AUKEY EP‐B60”. When connected, the LED indicator will
flash bluetwice every 5 seconds
4. If a code or pin is required for pairing, enter “0000”
Simultaneous Pairing with Two Devices
1. Follow the instructions in the “Pairing” section to pair the earbuds with Device A
2.Once paired, disable wireless function on Device A and turn off the earbuds
3. Follow the instructions in the “Pairing” section to pair with Device B
4. Once paired with Device B, reactivatewireless function on Device A and select “AUKEY EP‐B60” in the list
of paired devices
5. You can now make and receive calls from either of the two paired devices
Notes
•To clear pairing list, power on the earbuds and do not make the earbuds connected with any devices,
then hold volume +and multi‐function button simultaneously for 5 seconds until the LED
indicatorflashesred5 times. When you turn on the earbuds next time, the earbuds will automatically enter
into pairing mode
• The earbuds will automatically shut down after 5 minutes in pairing mode if no devices are paired
•If your paired device is turned off or manually disconnected, the earbuds LED indicator will flash blue
once every 8 seconds and the earbuds willautomatically shut down after 5 minutes
• The maximum wireless operating range is 33ft (10m). If you exceed this range, the earbuds will
disconnect from your paired devices. The LED indicator will flash blue twice every 5 seconds in 10 minutes
and then it will flash once every 8 seconds in 5 minutes. The connection will be re‐established once you
re‐enter the wireless range within15 minutes. The earbuds will automatically reconnect to the last‐paired
device. To connect with other devices, repeat the previous “Pairing” steps
Music and Calls Control
Making Calls
Once paired with your smartphone, making and answering phone calls can be managed via the in‐line
remote.
Answer / End a call
Press the multi‐function button once
Redial last called number
Double press the multi‐function buttonwhen connected
Reject an incoming call
Hold the multi‐function button for 2 seconds
Mute / Resume a call
Press and hold the volume ‐ for 2 seconds during a call
Voice switch
Press and hold the volume + for 2 seconds during a call to switch between
the earbuds and yourphone for talking
Device switch
Press and hold the multi‐function button for 2 seconds during a call to
switch between two mobile phones
Siri / Google assistant
Press multi‐function button for only 1 second and then must release your
finger, you will hear a tone
Streaming Audio
Once paired, you canwirelessly stream audio from your device to your earbuds. Music willautomatically
pausewhen you receive an incoming phone call, and resume once the call has ended.
Play / Pause
Press the multi‐function button once
Volume Control
Press the volume +/‐
Next / Previous Track
Press and hold the volume + / ‐ for 2 seconds
EQ Switch
Double press multi‐function button to switch vocals / treble /
bass when playing music and you will hear a tone
LED Indicator
Status
Blue & red flashing alternately
Pairing mode
Blue flashing twice every 5 seconds
Connected
Blue flashing twice every 8 seconds
Playing music
Blue flashing onceevery 8 seconds
Disconnected/ In call
Blue flashingonce every second
Incoming call
Red flashing twice every 8 seconds
Low battery
Red
Charging
Blue (after charging)
Fully charged
FAQ
The earbudsare on but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing
mode.Please follow the instructions in the “Pairing” section of this manual.
My device can’t find “AUKEY EP‐B60” on the pairing list when trying to pair
Make sure the earbudSare in pairing mode (flashing blue and red alternately; see the “Pairing” section of
this manual). Otherwise, restart your device and the earbuds; then try pairing again.
I have established a connection with my smartphone but can’t hear any sound
Double‐check the volume level on your smartphone and the earbuds. Some smartphones require you to set
up the earbuds as an audio output device before the audio can be transmitted. If you are using a music
player or other device, please make sure it supports the A2DP stereo music profile.
The sound is not very clear or the caller cannot hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try getting closer to your smartphone to rule out
the possibility of interference or wireless range‐related issues.
Can I use the earbuds while they are charging?
No.
What is the wireless range of the earbuds?
The maximum range is 33ft (10m). However, the actual range will depend on environmental factors. For
optimal performance, keep your devices connected with the earbuds within a 15ft‐25ft range and make
sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your devices.
My earbuds won’t turn on even when I have fully charged them
Connect the earbuds to a USB charger port with the included micro‐USB cable. Press and hold the
multi‐function button until the earbuds turn on. If the earbuds still won’t power on, please contact our
support team at the address below.
Product Care & Use
• Please keep away from liquids and extreme heat
• Do not use the earbuds at high volume for extended periods, as this may cause permanent hearing
damage or loss
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your
region. Please include your Amazon order number and product model number.
Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a
different seller, please contact them directly for service or warranty issues.
Notice for US
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation
FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be use
d in portable exposure condition without restriction.
FCC ID:2AFHP‐EP‐B60
Caution
Changes or modifications made to this device that are not expressly approved by AUKEY may void the
user's authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ntek136
Create Date                     : 2017:10:20 16:21:50+08:00
Modify Date                     : 2017:10:20 16:21:50+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 15.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - EP-B60 说明书 英语.docx
Creator                         : ntek136
Document ID                     : uuid:ba202aa7-9fb0-40f8-9071-ce4e8b4a3af7
Instance ID                     : uuid:7c15adbb-9864-488c-bc11-95f3d252a802
Page Count                      : 6

EXIF Metadata provided by EXIF.tools