Aukey E Business MRASWWP112 Smart bracelet User Manual B4 1020

Download:
Mirror Download [FCC.gov]
Document ID	3664135
Application ID	+tienxbkZPHL2fMUssOfiw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	263.22kB (3290217 bits)
Date Submitted	2017-12-06 00:00:00
Date Available	2017-12-06 00:00:00
Creation Date	2017-10-23 12:39:53
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-12-05 21:56:59
Document Title	B4说明书-1020
Document Creator	Adobe Illustrator CS6 (Windows)

1.Device Requirements
Android4.4 and above
Bluetooth 4.0
For iOS users: Please go to App store and search for "Wearfit 2.0", then click to
download and install, or by scanning the QR code as below.
iOS8.4 and above
Please fully charged the smart bracelet for the first time use because it is in low
power and can’t be powered on (Please refer to the“6.Charging guide”).Just
pull off the band and connect the charger clip, then plug the USB connector to
power bank, PC or wall charger to start charging. It takes about 2 hours for a full
charge. While charging, the bracelet screen will show the flow of the battery bar,
and stop after charging finished.
3. Pairing
Smart bracelet
MRASW-WP112
The smart band need to connect with smart phone for normal use. Please make
sure your smart phone meet the device requirements, and then download the
mobile APP by scanning the QR code.
Download:
For Android users: Please go to Android application store, o“
r Application of
treasure”or"Google play", search for "Wearfit2.0", click to download and install, or
by scanning the QR code as below.
—1—
After the smart band binds with the APP successfully, it will synchronize time and
date with the phone, and begin to record and analyze your movement, heart rate,
sleep status, etc.
Operation:
*Some functions are not compatiable to rare type of phone.
2.Before Use
4. Ready for use
Android & iOS APP Download
Setting tips:
Android users: Settings-Accessibility-Wearfit2.0-Allows all functions/Allows
background operation.
Settings - Applications - Wearfit 2.0 - allows all functions.
iOS users: Settings - Wearfit 2.0 - Allows all features.
APP language depends on your phone language
Binding:
After download the APP, then open the Bluetooth on your phone and the Wearfit
2.0 APP, click the "binding band", select“
”in the Bluetooth list, click binding,
Bluetooth pairing. Then back to the APP to set your personal information.
—2—
1. Click the touch button of the bracelet screen to switch different display
interface.
2. On time interface , long press to select the dial, short press again to
preview the dial, press and hold again and use the preview dial.
3. On stopwatch interface , long press to enter the stopwatch function, short
press to open the stopwatch, short press again to stop the stopwatch, and
long press to exit the stopwatch function.
4. On search phone interface , long press to enter the search phone function,
short press to start searching mobile phone, short press again to stop
searching, long press to exit the search phone function.
5. FAQ
1. Can not search the smart bracelet or can not be connected after binding?
Make sure your phone Bluetooth is open and near the smart bracelet, restart the
bracelet APP and turn off the phone Bluetooth for about 30 seconds and then
restart it, then try to search and connect. Please make sure your mobile phone
system meet the above device requirements (Note: Bluetooth connecting device
should keep in a small number or none, and some Android smart phones may need
to open the GPS positioning to search the smart bracelet.)
2. Time is not accurate on the bracelet?
When the smart bracelet is power off and you recharge it, which will appear time
error, you just connect your smart phone with the smart bracelet and the bracelet
will automatically calibrate the time.
6. Charging guide
Operation formula:
—3—
7.Parameters
Screen size:0.96inch
Bluetooth version:BT 4.0
Battery capacity:90mAh
8.Notice
5. On information interface , long press to view the last three historical
messages, short press to switch the message, long press again to exit the
information interface.
short click to switch, long press to enter.
short click to start, long press to exit.
4. Charge the bracelet
with power bank, phone
adapter or PC USB port.
1. Prepare your bracelet.
2. Pull down the bracelet
from the touching button
side.
—4—
3. Pull out the USB
charging interface.
5. Insert the USB
charging interface.
6. Pull up the bracelet.
Strap:TPU
Waterproof level:Splash-proof
Bracelet size:255mmx22mmx11.2mm
1.Please keep the band away from HOT WATER.
2.A wide temperature differential between indoor and outdoor would mist its
screen. Please dry it up before next usage.
3.Please charge the device once every three months if you leave it idle.
4.All the tested results are only for reference of sports,not for medical
purpose.
—5—
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
*The company reserves the right to make changes to the contents
of the specification without notice.
—6—

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:10:23 12:39:53+09:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:12:05 21:56:59+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : B4说明书-1020
Metadata Date                   : 2017:12:05 21:56:59+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 32
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5242 bytes, use -b option to extract)
Instance ID                     : uuid:7a88349e-0dde-4a40-91f1-d387ba112d7d
Document ID                     : xmp.did:CC2C3C2AA9B7E711A6F3F3D0201BF124
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:a23ad9d2-46f6-45f3-9918-e3f0d43c53b1
Derived From Document ID        : xmp.did:F3703FEFD6B3E711BB45C4942B4ECB16
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:EEF958A4266FE611825C8955EC82C156, xmp.iid:CC2C3C2AA9B7E711A6F3F3D0201BF124
History When                    : 2016:08:31 10:57:23+08:00, 2017:10:23 12:39:38+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Ingredients File Path           : C:\Users\Administrator\Desktop\矢量智能对象 拷贝（合并） 拷贝.png, C:\Users\Administrator\Desktop\矢量智能对象 拷贝（合并） 拷贝.png, E:\K1智能手环资料\K1智能手环APP二维码.png, E:\K1智能手环资料\K1智能手环APP二维码.png
Ingredients Document ID         : 0, 0, 0, 0
Ingredients Instance ID         : 0, 0, 0, 0
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\pc112\Desktop\WeChat Image_20171018183527.jpg, C:\Users\pc112\Desktop\WeChat Image_20171018183520.jpg, C:\Users\pc112\Desktop\WeChat Image_20171018183520.jpg, C:\Users\pc112\Desktop\WeChat Image_20171018183504.jpg, C:\Users\pc112\Desktop\WeChat Image_20171018183504.jpg, C:\Users\pc112\Desktop\WeChat Image_20171018183836.jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 742.383799
Max Page Size H                 : 157.683743
Max Page Size Unit              : Millimeters
Font Name                       : Roboto-Light, Roboto-Regular, SourceHanSansCN-Normal, SourceHanSansCN-Regular, SourceHanSansCN-Bold
Font Family                     : Roboto, Roboto, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN
Font Face                       : Light, Regular, Normal, Regular, Bold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 1.00000; 2011, Version 1.00000; 2011, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930
Font Composite                  : False, False, False, False, False
Font File Name                  : Roboto-Light.ttf, Roboto-Regular.ttf, SourceHanSansCN-Normal_0.otf, SourceHanSansCN-Regular_0.otf, SourceHanSansCN-Bold_0.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
For                             : ANDY,
Bounding Box                    : 158 159 1974 387
Container Version               : 11
Creator Version                 : 16
Image Height                    : 228
Image Width                     : 1816
Image Size                      : 1816x228
Megapixels                      : 0.414

EXIF Metadata provided by EXIF.tools