Aukey E Business SK-S1 Bluetooth Speaker User Manual

SHENZHEN AUKEY E BUSINESS CO., LTD. Bluetooth Speaker

15_SK-S1 UserMan

Thank you for purchasing the AUKEY SK-S1 Wireless Portable Speaker. Please read this user manual carefully and keep it in a safe place for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.Package ContentsWireless Portable Speaker Micro-USB Cable3.5mm Audio Cable User ManualWarranty CardProduct Diagram1. Call Button 2. Volume Down3. Volume Up 4. Previous Track5. Next Track 6. Multi-function Button7. LED IndicatorPower On / OffTo power on, press and hold the Power Button for 2 seconds. You will hear a voice prompt and the LED indicator will turn blue.To power off, press and hold the Power Button for 2 seconds. You will hear a voice prompt and the LED indicator will turn off. Pairing1. When you turn on the speaker, the speaker will automatically enter pairing mode and the LED indicator starts to flash blue rapidly.2. Activate the pairing function on your phone or other compatible devices and select “AUKEY SK-S1”.3. If a code or pin is required for pairing, please enter “0000”.4. When successfully paired, you will hear a voice prompt and the LED indicator will stay blue.Notes● The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired● If your paired device is switched off or disconnected, the speaker will automatically shut down after 10 minutes● If the speaker exceeds the operating range, it will disconnect and go into standby mode. The connection will be reestablished once you reenter wireless range within 10 minutes. The speaker will automatically reconnect to the last successfully paired device. To connect to other devices, please repeat the previous “Pairing” sectionPlaying Audio via Auxiliary (AUX)Connect SK-S1 to your PC or laptop using the included 3.5mm audio cable. Press Power Button to turn on and the LED indicator will turn green.Notes● The wireless connection on your speaker will be disconnected when an audio cable is plugged into the Aux port● When playing audio using the Aux connector, control buttons may be accessed from connected device only● For some computers, you may need to access the audio control panel to manually set the speaker as the default audio deviceFunctionsCancel pairingAnswer / End a callReject an incoming callRedial last numberAdjust volumeNext TrackPrevious TrackPause / ResumeInstructionsWhen connected, press and hold the Multi-function Button for 2 secondsShort press the Call Button oncePress and hold the Call Button for 2 secondsPress and hold the Call Button for 2 secondsShort press the Volume Up / Down onceShort press the Next Track onceShort press the Previous Track onceShort press the Multi-function Button onceLED IndicatorRapidly blinking blueBlue onRapidly blinking redRed onRed offStatusPairing modeConnected Low batteryChargingFully chargedSpecificationsModel NumberTechnologyPower InputSpeaker Output PowerFrequencyS/NCharging TimePlay TimeTalk TimeStandby TimeOperating RangeBattery TypeWorking TemperatureDimensionsWeightSK-S1v4.0, CSR8635, A2DP, AVRCP, HSP, HFPDC 5V2 × 8W160Hz-20kHz≥80dB~4 hours~8 hoursUp to 20 hoursUp to 250 hoursUp to 10m / 33ftLi-Polymer (7.4V 2000mAh)32°F - 104°F / 0°C - 4°C200 × 60 × 64mm / 7.87” × 2.36” × 2.52”675g / 23.8ozProduct Care● Keep away from liquids, extreme heat, and strong magnetic fieldsWarranty & Customer Support For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number. Amazon US orders: support@aukey.com Amazon EU orders: support.eu@aukey.com Amazon CA orders: support.ca@aukey.com Amazon JP orders: support.jp@aukey.com*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.- 01 -- 02 - - 03 - - 04 -User ManualBluetooth SpeakerShenzhen Aukey E Business Co., Ltd.www.aukey.com | support@aukey.comNo.102, Building P09, Electronics Trade CenterHuanan City, Pinghu Town, Longgang DistrictShenzhen, Guangdong, 518111, CNModel: SK-S1Made in ChinaChargingPlease fully charge this speaker before first use. Connect it to a USB power source with the included Micro-USB cable to charge.Aux inMicro-USB Charging PortPower Button1 2 3 4 5 6 7ContentsEnglishDeutschFrançais EspañolItaliano日本語01~0405~0809~1213~1617~2021~24abFCC Statement- 05 -This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu