Aukey E Business SK-S1 Bluetooth Speaker User Manual
SHENZHEN AUKEY E BUSINESS CO., LTD. Bluetooth Speaker
15_SK-S1 UserMan
Thank you for purchasing the AUKEY SK-S1 Wireless Portable Speaker. Please read this user manual
carefully and keep it in a safe place for future reference. If you need any assistance, please
contact our support team with your product model number and Amazon order number.
Package Contents
Wireless Portable Speaker Micro-USB Cable
3.5mm Audio Cable User Manual
Warranty Card
Product Diagram
1. Call Button 2. Volume Down
3. Volume Up 4. Previous Track
5. Next Track 6. Multi-function Button
7. LED Indicator
Power On / Off
To power on, press and hold the Power Button for 2 seconds. You will hear a voice prompt and
the LED indicator will turn blue.
To power off, press and hold the Power Button for 2 seconds. You will hear a voice prompt and
the LED indicator will turn off.
Pairing
1. When you turn on the speaker, the speaker will automatically enter pairing mode and the LED
indicator starts to flash blue rapidly.
2. Activate the pairing function on your phone or other compatible devices and select “AUKEY
SK-S1”.
3. If a code or pin is required for pairing, please enter “0000”.
4. When successfully paired, you will hear a voice prompt and the LED indicator will stay blue.
Notes
● The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired
● If your paired device is switched off or disconnected, the speaker will automatically shut down
after 10 minutes
● If the speaker exceeds the operating range, it will disconnect and go into standby mode. The
connection will be reestablished once you reenter wireless range within 10 minutes. The speaker
will automatically reconnect to the last successfully paired device. To connect to other devices,
please repeat the previous “Pairing” section
Playing Audio via Auxiliary (AUX)
Connect SK-S1 to your PC or laptop using the included 3.5mm audio cable. Press Power Button
to turn on and the LED indicator will turn green.
Notes
● The wireless connection on your speaker will be disconnected when an audio cable is plugged
into the Aux port
● When playing audio using the Aux connector, control buttons may be accessed from connected
device only
● For some computers, you may need to access the audio control panel to manually set the
speaker as the default audio device
Functions
Cancel pairing
Answer / End a call
Reject an incoming call
Redial last number
Adjust volume
Next Track
Previous Track
Pause / Resume
Instructions
When connected, press and hold the
Multi-function Button for 2 seconds
Short press the Call Button once
Press and hold the Call Button for 2 seconds
Press and hold the Call Button for 2 seconds
Short press the Volume Up / Down once
Short press the Next Track once
Short press the Previous Track once
Short press the Multi-function Button once
LED Indicator
Rapidly blinking blue
Blue on
Rapidly blinking red
Red on
Red off
Status
Pairing mode
Connected
Low battery
Charging
Fully charged
Specifications
Model Number
Technology
Power Input
Speaker Output Power
Frequency
S/N
Charging Time
Play Time
Talk Time
Standby Time
Operating Range
Battery Type
Working Temperature
Dimensions
Weight
SK-S1
v4.0, CSR8635, A2DP, AVRCP, HSP, HFP
DC 5V
2 × 8W
160Hz-20kHz
≥80dB
~4 hours
~8 hours
Up to 20 hours
Up to 250 hours
Up to 10m / 33ft
Li-Polymer (7.4V 2000mAh)
32°F - 104°F / 0°C - 4°C
200 × 60 × 64mm / 7.87” × 2.36” × 2.52”
675g / 23.8oz
Product Care
● Keep away from liquids, extreme heat, and strong magnetic fields
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with
your region. Please include your Amazon order number and product model number.
Amazon US orders: support@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you
have purchased from a different seller, please contact them directly for service or warranty issues.
- 01 -
- 02 - - 03 - - 04 -
User Manual
Bluetooth Speaker
Shenzhen Aukey E Business Co., Ltd.
www.aukey.com | support@aukey.com
No.102, Building P09, Electronics Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong, 518111, CN
Model: SK-S1
Made in China
Charging
Please fully charge this speaker before first use. Connect it to a USB power source with the
included Micro-USB cable to charge.
Aux in
Micro-USB Charging Port
Power Button
1 2 3 4 5 6 7
Contents
English
Deutsch
Français
Español
Italiano
日本語
01~04
05~08
09~12
13~16
17~20
21~24
a
b
FCC Statement
- 05 -
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.