Auris AU04 Bluetooth Receiver User Manual bluMe Quick Start Guide
Auris, Inc. Bluetooth Receiver bluMe Quick Start Guide
Auris >
15_AU04 UserMan
WELCOME! KEYS AND PARTS Congratulations on your purchase of the auris bluMe True Hi-Fi Bluetooth® Music Receiver! The following pages explain the features and operations of bluMe. Please take a few moments to read this user guide. Also read all safety instructions before proceeding. The answers to most set up and performance questions can be found in this guide. If you have any further questions about the operation or use of this product, please contact our customer care team for assistance on support@theauris.com bluMe QUICK START GUIDE Overview Enjoy a limitless universe of high definition digital music through your existing Hi-Fi audio system. bluMe streams the highest quality audio wirelessly from your Bluetooth® enabled device to any music system or powered speakers. bluMe is a true high fidelity component that uses high-end aptX® / AAC audio streaming codecs and audiophile grade DAC to unleash all the clarity, crispness and full emotional impact your Hi-Fi stereo system can deliver. Unlike standard Bluetooth receivers, bluMe provides ultimate wireless freedom with the longest wireless range. Antenna Power / Pair button Analog audio output Toslink 24-bit optical output DC power input In the Box auris bluMe 2RCA to 2RCA Stereo Audio Cable 3.5mm to 2RCA Stereo Audio Cable USB-microUSB Cable Microfiber Bag Quick Start Guide Model:AU04 QUICK SETUP TROUBLESHOOTING TIPS Setup and pairing is really easy. The following instructions will help you connect bluMe to your music system and pair with your tablet, computer or smartphone. bluMe is connected but the LED indicator does not light up. Confirm that the power adapter is connected to bluMe with the included USB cable and plugged into a functioning AC outlet. Step 1: Connect audio cables from bluMe rear panel to your music system audio input. My device does not pair with bluMe. Ensure that Bluetooth is turned ON on your device. Make sure that the LED indicator is blinking and your device is within bluMe’s wireless range of 30 meters (100 feet). Step 2: Connect a power adapter to bluMe with the included power supply cable and plug the power adapter into an AC outlet. bluMe will automatically go into pair mode. The LED light will start flashing to indicate the unit is now ready to be paired. Step 3: Turn ON Bluetooth on your device and go to Bluetooth preferences. Step 4: Scan listed Bluetooth devices and select “auris bluMe” to pair and connect. The LED indicator should turn solid. Front Panel Step 5: Make sure your Hi-Fi audio system is turned on and the proper input source is selected. Step 6: The music on your smart device will now play through your Hi-Fi audio system! Rear Panel Repeat Steps 3 to 6 to add additional devices. bluMe can connect to one smart device at a time, but is capable of remembering up to 8 devices. Press and hold the Power / Pair button until the indicator starts flashing to disconnect bluMe from a paired device and put it back into pair mode. The LED Indicator is solid, but I cannot connect my device. Check whether no other devices are connected. If so, either disconnect or turn off Bluetooth on the other devices or press and hold the Power / Pair button till it flasshes, then try connecting. Try unpairing and repairing your device to bluMe. Power cycle bluMe by disconnecting and reconnecting the power cable. The sound quality is poor and / or the audio is cutting out. Move your device or bluMe away from cordless phones, routers, microwave ovens or other Bluetooth devices. Try moving your device closer to bluMe. Try another location. Turn off your device’s Wi-Fi. Try unpairing and repairing your device to bluMe. Power cycle bluMe by disconnecting and reconnecting the power cable. Check that your device’s OS is updated to the latest version. Only one channel plays music. Check the cables between bluMe and your stereo system. Check your music player app and / or OS audio controls to ensure that the audio balance is centered. If you have any further queries please contact us on support@theauris.com The LED indicator is solid and my device is connected but there is no audio output. Ensure that the bluMe output is correctly connected to your audio system. Check whether the audio source is correctly selected on your music system (analog audio or digital optical input). Verify the volume levels on your computer OS and player app. Try unpairing and repairing your device to bluMe. Power cycle bluMe by disconnecting and reconnecting the power cable. The volume output level from bluMe is Low. Verify the volume levels on your computer OS and player app. Also check the volume levels on your powered speakers or stereo system. PRODUCT SAFETY TECHNICAL SPECIFICATIONS Bluetooth® Version 4.1 with aptX® Low Latency Dimensions Height Width Depth Weight 1.00 3.50 2.95 5.10 inches (25 mm) inches (90 mm) inches (75 mm) ounces (145 grams) When used in the directed manner, this unit has been designed and SAFETY INSTRUCTIONS Keep product dry to avoid affecting the interior circuitry of the product. manufactured to ensure your personal safety. Improper use of this product Supported Codecs aptX, AAC, SBC Bluetooth Range 30 meters, 100 feet Input Bluetooth Outputs Stereo Analog RCA Digital Optical (SPDIF) Don’t expose to extreme temperatures, it may damage the internal Input Power 5V, 200 mA circuit board. Output Voltage 2 Volts RMS Output Impedance 57 Ohms D/A Converter AKM AK4396 Frequency Response 10Hz - 20kHz (+/- 0.5dB) Signal to Noise Ratio 120dB Total Harmonic Distortion + Noise < 0.02% Latency ~30 milliseconds (ms) Enclosure Included Accessories Aluminum RCA-RCA Audio Cable RCA-3.5mm Audio Cable USB-microUSB Cable Microfiber Bag User Guide can result in potential electrical shock or fire hazards. Please read all safety CAUTION: To reduce the risk of electric shock do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. 2.95 inches (75 mm) Don’t put the product in direct sunlight or place in hot areas. and operating instructions carefully before installation and use. Keep these instructions handy for future reference. 1 inch (25 mm) ® Don’t drop the product. Due to isolating characteristic of the product, do not use the product at Users of this product are cautioned not to make modifications or changes excessive volume while driving or in any other activity where failure to that are not approved by Auris, Inc. Doing so may void the compliance of hear surrounding sounds could be dangerous. the equipment. www.theauris.com/warranty Don’t take the product apart or the warranty will be voided. Don’t use chemical or detergent to clean the product. Weight: 5.1 oz (145 grams) Don’t worry. Your auris bluMe is covered under our warranty. For warranty information please visit: High temperature will shorten the life of electronic device. this product and may result in the loss of the user’s authority to operate 3.5 inches (90 mm) WARRANTY Using the product at excessive volumes may cause permanent hearing damage. You can get the most out of your equipment and enjoy great audio performance even at safe levels. www.theauris.com support@theauris.com © 2015 Auris, Inc. All Rights Reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The aptX® mark and the aptX® logo are trade marks of CSR plc. or one of its group companies and may be registered in one or more jurisdictions. All other trademarks and logos are property of their respective owners. Designed in the U.S.A. Made in China. Auris, Inc. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : bluMe-Quick Start Guide Metadata Date : 2015:12:21 17:31:50+08:00 Modify Date : 2015:12:21 17:31:50+08:00 Create Date : 2015:11:08 15:14:21+06:30 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 108 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11181 bytes, use -b option to extract) Instance ID : uuid:7743aa3b-4573-4b88-b300-254e98283d8f Document ID : xmp.did:4466E642FD85E511859AEE90E52FF125 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:f8d71230-2728-4e0f-babd-863fa8c17457 Derived From Document ID : xmp.did:7C85D8E2DD83E511A9FBEF12318BE28F Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:7C85D8E2DD83E511A9FBEF12318BE28F, xmp.iid:4466E642FD85E511859AEE90E52FF125 History When : 2015:11:05 22:24:32+05:30, 2015:11:08 15:14:10+05:30 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : D:\Auris\freeDa\User Guide\caution.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 68.999992 Max Page Size H : 13.999972 Max Page Size Unit : Centimeters Font Name : HelveticaNeueLTStd-Th, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Bd, HelveticaNeueLTStd-Lt, HelveticaNeueLTStd-Md Font Family : Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std Font Face : 35 Thin, 55 Roman, 75 Bold, 45 Light, 65 Medium Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : OTF 1.029;PS 001.003;Core 1.0.33;makeotf.lib1.4.1585, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960, OTF 1.029;PS 001.102;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585 Font Composite : False, False, False, False, False Font File Name : HelveticaNeueLTStd-Th.otf, HelveticaNeueLTStd-Roman.otf, HelveticaNeueLTStd-Bd.otf, HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTStd-Md.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : RGB Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Red : 127 Swatch Groups Colorants Green : 63 Swatch Groups Colorants Blue : 152 Producer : Adobe PDF library 10.01 Has XFA : No Page Count : 3 Creator : Adobe Illustrator(R) 16.0 For : Mohammed Mamujee, Bounding Box : -6291 2455 -4335 3264 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools