Autec s r l E16STXUS1 Part 15 Remote Control Transmitter User Manual E16STXUS1 installation guide rev1

Autec s.r.l. Part 15 Remote Control Transmitter E16STXUS1 installation guide rev1

Users manual

1E16STXUS1 guideE16STXUS1 guide1Description2ProgrammingThe transmitting module E16STXUS1 has two groups of DIP switches: a group of 4 and agroup of 8 DIPs. They program some functions and set the working frequency.The Autec programming set in the other group of four dip switches must never be modified.The group of eight dip switches located on the radio module are used to program some func-tions and set the working frequency.Aconnector for interface card orkeyboardBaddress keyCDIP switchesDantennaDIP STATE FUNCTION1ON The transmitting unit never switches off automaticallyOFF If the transmitting unit stays switched on without any movementcommands entered, it switches off after approx. 3.5 minutes2ON Deactivation of low battery warning from horn on machineOFF Activation of low battery warning from horn on machine3ON If DIP 8 is OFF automatic scan of the frequencies in the band 915 -928 MHzOFF If DIP 8 is OFF automatic scan of the frequencies in the band 902 -915 MHz3-7 ON/OFF If DIP 8 is ON see “Frequency Table”8ON Manual selection mode of the frequencies using DIP 3 - DIP 7 (refer to“Appendix: Frequency Table”)OFF Automatic scan mode of the frequencies in the band selected by DIP 3(DIP 4 - DIP 7 indifferent)CABD
2 E16STXUS1 guideIn order to work correctly, the following DIP switches in the transmitting module E16STXUS1and in the receiving module E16SRXUS1 of the radio remote control units must be set in thesame way.3 Frequency table4 Antenna positionThe position of the E16STXUS1 antenna depends on the transmitting unit: the antenna can befolded to fit the space inside the transmitting unit but it must never be unsoldered from themodule.5InstallationAutec maintains control of the assembly of the E61STXUS1 modules into the its transmittingunits.It is forbidden any other type of use or installation by anyone.6ReplacementIt is possible replace the E16STXUS1 transmitting module in the transmitting unit only byauthorized personell which knows the procedure related to the specific transmitting unit.7IC warningThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is sub-ject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesiredoperation of the device.MODULE DIPE16STXUS1(group of 8 DIP switches)2345678E16SRXUS1(group of 8 DIP switches)2345678
3E16STXUS1 guide8 FCC warningThis device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.Any changes or modifications to the software or equipment that are not expressly approvedby Autec, could void the manufacturer’s warranty, and could void the user’s authority to oper-ate the equipment.
4 E16STXUS1 guide

Navigation menu