Autec s r l E16STXUS1 Part 15 Remote Control Transmitter User Manual E16STXUS1 installation guide rev1

Download:
Mirror Download [FCC.gov]
Document ID	1444416
Application ID	gl8x8kKDeV8pR9oFn9jKIg==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.05kB (150586 bits)
Date Submitted	2011-04-07 00:00:00
Date Available	2011-04-07 00:00:00
Creation Date	2017-11-06 00:37:42
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-06 00:37:42
Document Title	E16STXUS1_installation_guide_rev1.fm
Document Creator	FrameMaker 7.1
Document Author:	stefanob

E16STXUS1 guide
E16STXUS1 guide
Description
connector for interface card or
keyboard
address key
DIP switches
antenna
Programming
The transmitting module E16STXUS1 has two groups of DIP switches: a group of 4 and a
group of 8 DIPs. They program some functions and set the working frequency.
The Autec programming set in the other group of four dip switches must never be modified.
The group of eight dip switches located on the radio module are used to program some functions and set the working frequency.
DIP
STATE
FUNCTION
ON
The transmitting unit never switches off automatically
OFF
If the transmitting unit stays switched on without any movement
commands entered, it switches off after approx. 3.5 minutes
ON
Deactivation of low battery warning from horn on machine
OFF
Activation of low battery warning from horn on machine
ON
If DIP 8 is OFF automatic scan of the frequencies in the band 915 928 MHz
OFF
If DIP 8 is OFF automatic scan of the frequencies in the band 902 915 MHz
3-7
ON/OFF If DIP 8 is ON see “Frequency Table”
ON
Manual selection mode of the frequencies using DIP 3 - DIP 7 (refer to
“Appendix: Frequency Table”)
OFF
Automatic scan mode of the frequencies in the band selected by DIP 3
(DIP 4 - DIP 7 indifferent)
E16STXUS1 guide
In order to work correctly, the following DIP switches in the transmitting module E16STXUS1
and in the receiving module E16SRXUS1 of the radio remote control units must be set in the
same way.
MODULE
DIP
E16STXUS1
(group of 8 DIP
switches)
E16SRXUS1
(group of 8 DIP
switches)
Frequency table
Antenna position
The position of the E16STXUS1 antenna depends on the transmitting unit: the antenna can be
folded to fit the space inside the transmitting unit but it must never be unsoldered from the
module.
Installation
Autec maintains control of the assembly of the E61STXUS1 modules into the its transmitting
units.
It is forbidden any other type of use or installation by anyone.
Replacement
It is possible replace the E16STXUS1 transmitting module in the transmitting unit only by
authorized personell which knows the procedure related to the specific transmitting unit.
IC warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
E16STXUS1 guide
FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications to the software or equipment that are not expressly approved
by Autec, could void the manufacturer’s warranty, and could void the user’s authority to operate the equipment.
E16STXUS1 guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2011:04:06 16:59:09+02:00
Create Date                     : 2003:01:14 16:35:45Z
Metadata Date                   : 2011:04:06 16:59:09+02:00
Format                          : application/pdf
Title                           : E16STXUS1_installation_guide_rev1.fm
Creator                         : stefanob
Document ID                     : uuid:e10828f8-c37c-4a38-88b1-08de592ab699
Instance ID                     : uuid:afa7358b-f727-4151-ba7c-46061ace11db
Page Count                      : 4
Author                          : stefanob

EXIF Metadata provided by EXIF.tools