Autec s r l FJRNZ422 Transceiver unit User Manual
Autec s.r.l. Transceiver unit
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3136453 |
| Application ID | xlviOWjG6alSq12IYYryNg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 178.3kB (2228778 bits) |
| Date Submitted | 2016-09-16 00:00:00 |
| Date Available | 2016-09-16 00:00:00 |
| Creation Date | 2016-03-11 15:31:42 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2016-03-11 15:31:43 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
Original instructions DYNAMIC SERIES Part B: Conformity and frequencies (915MHz - FCC/IC) INDEX Conformity .............................................................................................................. 1.1 Federal Communications Commission (FCC) .................................................... 1.2 Industry Canada (IC) ........................................................................................ Frequencies ............................................................................................................ 2.1 Dynamic mode .................................................................................................. 2.2 Static mode ....................................................................................................... Market ..................................................................................................................... AUTEC LIDY2E00-08 2 Conformity Conformity Each Dynamic series' radio remote control working in the frequency band 915-928MHz complies with Part 15 of standards FCC and with RSS-210 of IC standards. Unit a. b. c. d. FCC ID IC number ADD OQA-ADDNE022 9061A-ADDNE022 a b c ARM OQA-ARMNB022 d OQA-ARMNC022 d 9061A-ARMNB022 a b c 9061A-ARMNC022 a b c ARS OQA-ARSND022 9061A-ARSND022 a b c ARX OQA-ARXNG022 9061A-ARXNG022 a b c CRS OQA-CRSNA022 9061A-CRSNA022 a b c CRX OQA-CRXNH022 9061A-CRXNH022 a b c FJL OQA-FJLNF022 9061A-FJLNF022 FJM OQA-FJMNF022 9061A-FJMNF022 FJM OQA-FJMNZ422 9061A-FJMNZ422 FJR OQA-FJRNF022 9061A-FJRNF022 FJR OQA-FJRNZ422 9061A-FJRNZ422 FJS OQA-FJSNF022 9061A-FJSNF022 Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type Antenna gain Antenna impedance Autec stylus λ/4 <2dBi 50 Ohm Autec stylus λ/4 with 5m RG58 <2dBi 50 Ohm Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the guarantee. Place the antenna of the receiving unit in a position that ensures a minimum separation distance of 20cm with all the people that can be in the working area. LIDY2E00-08 AUTEC - Dynamic Series Frequencies 1.1 Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1.2 Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Frequencies The radio link between the units of Autec Dynamic series radio remote controls is established at one of the frequencies permitted by the US, Canadian and Australian standards in force when the system is put on the market. Frequency band ............................................................................................. 915-928MHz RF power ......................................................................... meets FCC and IC requirements Available radio channels .............................................................................................. 259 Channel spacing ...................................................................................................... 50kHz Dynamic series industrial radio remote controls communicate either in dynamic or static mode. Mode is set by the machine manufacturer. 2.1 Dynamic mode A radio remote control communicating in dynamic mode: -- uses a working frequency in the band 915-928MHz -- checks that the frequency is free before using it -- continually changes the working frequency to maintain the radio link even when interference occurs. 2.2 Static mode A radio remote control communicating in static mode: -- uses a working frequency in the band 915-928MHz -- checks that the frequency is free before using it -- always works at the same frequency until the stop function is activated. AUTEC - Dynamic Series LIDY2E00-08 4 Market Market Dynamic series' radio remote controls working in the frequency band 915-928MHz can be used in the US, Canadian and Australian markets. LIDY2E00-08 AUTEC - Dynamic Series
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2016:03:11 15:31:42+01:00 Metadata Date : 2016:03:11 15:31:43+01:00 Modify Date : 2016:03:11 15:31:43+01:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:19989672-1649-475a-8d75-5924305a1e57 Original Document ID : xmp.did:3E97F9BFF011E111AF74C00038EEA0BF Document ID : xmp.id:91F452F495E7E511822CE42B194A29C2 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:90F452F495E7E511822CE42B194A29C2 Derived From Document ID : xmp.did:90F452F495E7E511822CE42B194A29C2 Derived From Original Document ID: xmp.did:3E97F9BFF011E111AF74C00038EEA0BF Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2016:03:11 15:31:42+01:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Layout : SinglePage Page Count : 4 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools