Autec s r l RGAGA00M Remote control - fixed unit User Manual

Autec s.r.l. Remote control - fixed unit

User Manual

Original instructionsAIR SERIESPart B:Conformity and frequencies(434 and 915MHz)INDEX1 Conformity ............................................................................................................. 21.1 Conformity of frequency band 433.050-434.790MHz ........................................ 21.2 Conformity of frequency band 915-928MHz ..................................................... 22 Frequencies ........................................................................................................... 32.1 Frequency band 433.050-434.790MHz ............................................................ 32.2 Frequency band 915-928MHz .......................................................................... 4AUTEC LIAIRI10-02
1 Conformity1.1 Conformity of frequency band 433.050-434.790MHzEach AIR series' radio remote control working in the frequency band 433.050-434.790MHz complies with the (R&TTE) Directive 1999/5/EC and its essential requirements.Each radio remote control is also in conformity with the harmonised standards provided in the EC Declaration of Conformity.You can nd the EC Declaration of Conformity on the website www.autecsafety.com, in the product page of the relevant transmitting unit.1.2 Conformity of frequency band 915-928MHzEach AIR series' radio remote control working in the frequency band 915-928MHz complies with the essential requirements of the following regulations: -FCC (Federal Communication Commission) Part 15 -IC (Industry Canada) RSS-102Unit FCC ID IC NumberA8 transmitting unit OQA-A08LA0AM 9061A-A08LA0AMReceiving unit GACRS13-G OQA-RGAGA00M 9061A-RGAGA00M a b cReceiving unit GDCRS13 OQA-RGEBA00M 9061A-RGEBA00M a b cReceiving unit LACRS13-L OQA-RLBHA00M 9061A-RLBHA00M a b cReceiving unit MACRM15 OQA-RMCEA00M 9061A-RMCEA00M a b ca. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.b. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna type Antenna gain Antenna impedanceAutec stylus λ/4 <0dBi 50 Ohmc. Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the guarantee.2LIAIRI10-02ConformityAUTEC - Air series
1.2.1 Federal Communications Commission (FCC)This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.1.2.2 Industry Canada (IC)This device complies with RSS-210 of the Industry Canada Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.2 FrequenciesAIR series radio remote controls can work at two dierent frequency bands: 433.050-434.790MHz or 915.000-928.000MHz.The radio remote controls' working frequency is dened by market-specic laws and standards. In order for the system “machine+radio remote control” to be compliant and therefore to be used, it shall comply with such laws and standards: if it does not, the system may be impounded by competent bodies.Autec cannot be held responsible if the radio remote control is set with forbidden frequencies.They automatically search for a free working frequency.2.1 Frequency band 433.050-434.790MHz2.1.1 FrequenciesThe radio link between the units of Autec AIR series radio remote controls is built at one of the frequencies permitted by the European standards in force when the system is put on the market.Frequencies used in the band 433.050-434.790MHz ..................................................... 64RF power ................................................................................................................ <1mWChannel spacing ...................................................................................................... 25kHz2.1.2 MarketAir series' radio remote controls working in the frequency band 433.050-434.790 MHz can be used within the EU (European Union), the EFTA (European Free Trade Association) and in Singapore.AUTEC - Air seriesFrequencies 3LIAIRI10-02
2.2 Frequency band 915-928MHz2.2.1 FrequenciesThe radio link between the units of Autec AIR series radio remote controls is built at one of the frequencies permitted by the US and Canadian standards in force when the system is put on the market.Frequencies used in the band 915-928MHz ................................................................ 256RF power ........................................................................ meets FCC and IC requirementsChannel spacing ...................................................................................................... 50kHz2.2.2 MarketAir series' radio remote controls working in the frequency band 915-928MHz can be used in the US and Canadian markets.4LIAIRI10-02FrequenciesAUTEC - Air series

Navigation menu