Autel Intelligent Tech MXPRGXP201 MAXIPROGRAMMER 201 User Manual

Autel Intelligent Tech. Corp., Ltd. MAXIPROGRAMMER 201

User Manual

i Trademarks Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiRecorder®, MaxiTPMS®, and MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Autel. Disclaimer of Warranties and Limitation of Liabilities All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given to the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations. Autel will not be liable for any direct damages or for any special, incidental, or indirect damages or for any economic consequential damages (including lost profits). IMPORTANT Before operating or maintaining this unit, please read this manual carefully, paying attention to the safety warnings and precautions. For Services and Support: http://pro.autel.com www.autel.com 1-855-288-3587/1-855-AUTELUS (North America) 0086-755-86147779 (China) Support@autel.com For technical assistance in all other markets, please contact your local selling agent.
ii Contents 1 SAFETY PRECAUTIONS ................................................................ 1 2 INTRODUCTION ............................................................................ 2 SPECIFICATIONS ................................................................................ 2 ACCESSORIES INCLUDED .................................................................... 3 COMPONENTS AND PORTS .................................................................. 4 3 PRODUCT TROUBLESHOOTING .................................................13 4 UPDATE ........................................................................................14 SOFTWARE UPDATE ..........................................................................14 5 COMPLIANCE INFORMATION ......................................................16 6 WARRANTY AND SERVICE ..........................................................18 LIMITED ONE YEAR WARRANTY ..........................................................18 SERVICE INFORMATION ......................................................................19
1 1 Safety Precautions The AUTEL MaxiProgrammer 201 (XP201 for short) has been carefully designed to help automotive technicians maintaining and servicing modern vehicles. To avoid personal injury or damage to vehicles, please read this manual first and observe the following safety precautions whenever working on a vehicle. Make sure:  The diagnosis or service is performed in a safe environment.  The vehicle is operated in a well-ventilated work area.  The vehicle parts and XP201 components are welded at a constant temperature.  The vehicle and XP201 are powered off and grounded.  The XP201 is dry, clean, and free from oil, water, grease and dust.  Electrostatic interference is avoided during operation. If a failure occurs due to electrostatic interference, please try to operate again.
2 2 Introduction The MaxiProgrammer 201 is specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the MaxiProgrammer 201 can read/write key chip data quickly and accurately. Specifications Table 2-1 Specifications Item Description Operating Temperature -10℃ ~ 85℃ (14℉ ~ 185℉) Storage Temperature -20℃ ~ 85℃ (-4℉ ~ 185℉) Port Mini USB, VGA_DB15 Input Voltage 5 VDC Operating Current < 250 mA Maximum Consumption 1 W Device Dimensions (L*W*H) 130 mm * 68 mm * 28 mm Package Dimensions (L*W*H) 201 mm * 167 mm * 75 mm Net Weight 466 g Gross Weight 11 kg (20 pcs)
3 Accessories Included APB001 – EEPROM Adaptor APA002 – EEPROM Socket APA001 – EEPROM Clamp Integrated MC9S12 Cable User’s Manual APC001 – USB Cable (Standard USB – Mini USB) APC002 – USB Cable (Mini USB – Mini USB) (Optional) The two types of USB cables work with different products, please choose the corresponding USB cable for the product you use.
4 Components and Ports Figure 2-1 MaxiProgrammer 201 Views 1. Vehicle Key Chip Slot – holds the vehicle key chip. 2. Vehicle Key Slot – holds the vehicle key. 3. Status LED Light – indicates the current operating status. 4. Connection Port – connects EEPROM Adaptor and EEPROM Clamp Integrated MC9S12 Cable. 5. USB Port – provides data communication and power supply. Vehicle Key Slot Holds the Vehicle Key to read and write vehicle key information. Vehicle Key Chip Slot Holds the Vehicle Key Chip to read and write vehicle key chip information. Status LED Light The status LED of the XP201 indicates the operating status of the
5 device. See Table 2-2 for detailed description. Table 2-2 Status LED Light on the Front Panel LED Light Color/Status Description Power Solid Green Powered on and Default Status Flashing Green Communication Status Solid Red Error Status Connection Port There are two accessories that can be paired with the connection port: EEPROM Clamp Integrated MC9S12 Cable and EEPROM Adaptor.
6 EEPROM Clamp Integrated MC9S12 Cable Figure 2-2 EEPROM Clamp Integrated MC9S12 Cable 1. MC9S12 Cable
7 Table 2-3 Definitions of MC9S12 Cable No. Color Definition Pin correspond to DB15 Note 3 Green TXCLKS 1 4 Black GND 2 Shielded line 5 White TOSC 6 Shielded line 6 Blue TSW 7 7 Brown GND 8 8 Yellow TRESET 11 9 Red VDD 12 2. EEPROM Clamp Cable Table 2-4 Definitions of EEPROM Clamp Cable No. Color Definition Pin correspond to DB15 Note 10 White and Red P1 5 Pin 1 is red 11 White and Purple P2 15 12 White and Blue P3 10 13 Grey P4 4 14 White and Brown P5 14 15 White and Green P6 9
8 16 White and Orange P7 3 17 White and Black P8 13 Pin 8 is black Here are the possible causes for EEPROM read/write failure and data error when connecting the clamp to the test board for EEPROM read/write: A. EEPROM read/write operations are affected by the circuit of the connected test board; B. EEPROM read/write operations of the test board are affected by the read/write operations of the clamp; C. The signal is damaged by large resistance. A large resistance will be generated when connecting the clamp to a fast communicating EEPROM or using a long cable for connection. Therefore, it is recommended to dismantle the chip on the EEPROM, weld the EEPROM to the EEPROM adaptor or place in the EEPROM socket, and then insert it in the EEPROM adaptor. 18. EEPROM Clamp 19. DB15 VGA Port EEPROM Adaptor The EEPROM adaptor is compatible with three 8-pin packaging TSSOP, SOP, DIP connections, and each packaging reserves three same ports, so the device will function properly when one port is damaged. For SOP8 packaging, the EEPROM adaptor can also work with the EEPROM socket. To do this, place the pins of the SOP8 EEPROM into the EEPROM accordingly and then insert them into the EEPROM adaptor. USB Port The USB port is used for the data communication between the XP201
9 and the diagnostic device or the PC, and it is also the port for power supply charge. EEPROM Read/Write Supported Types Chip Type Name Chip Type Name ATMEL AT24C01 ST M24C04 ATMEL AT24C02 ST M24C08 ATMEL AT24C04 ST M24C16 ATMEL AT24C08 ST M24C32 ATMEL AT24C16 ST M24C64 ATMEL AT24C32 FAIRCHILD NM24C16U ATMEL AT24C64 FAIRCHILD NM24C16UT ATMEL AT24C128 FAIRCHILD NM24C17U ATMEL AT24C256 FAIRCHILD NM24C17UT ATMEL AT24C512 MICROCHIP 85C72 ATMEL AT24C1024 MICROCHIP 85C82 ATMEL AT24C128_1.8 MICROCHIP 85C92 ATMEL AT24C256_1.8 NXP PCF8582C ATMEL AT24C512_1.8 NXP PCF8594C ATMEL AT24C01A NXP PCF8598C ST ST24x01/ST25x01 ATMEL AT25010 ST ST24x02/ST25x02 ATMEL AT25020 ST ST24x04/ST25x04 ATMEL AT25040 ST ST24x08/ST25x08 ATMEL AT25080 ST ST24x16/ST25x16 ATMEL AT25160
10 Chip Type Name Chip Type Name ST M24C01 ATMEL AT25320 ST M24C02 ATMEL AT25640 ATMEL AT25128 MICROCHIP 25xx080 ATMEL AT25256 MICROCHIP 25xx160 ATMEL AT25512 MICROCHIP 25xx320 ATMEL AT25010_1.8 MICROCHIP 25xx640 ATMEL AT25020_1.8 MICROCHIP 25xx040_TSSOP ATMEL AT25040_1.8 MICROCHIP 25xx320_TSSOP ATMEL AT25080_1.8 MICROCHIP 25xx640_TSSOP ATMEL AT25160_1.8 CATALYST CAT25C01 ATMEL AT25320_1.8 CATALYST CAT25C02 ATMEL AT25640_1.8 CATALYST CAT25C04 ATMEL AT25128_1.8 CATALYST CAT25C08 ATMEL AT25256_1.8 CATALYST CAT25C16 ST M95010 CATALYST CAT25C32 ST M95020 CATALYST CAT25C64 ST M95040 CATALYST CAT25C128 ST M95080 CATALYST CAT25C256 ST M95160 ST M35080 ST M95320 XICOR X5043 ST M95640 XICOR X5045 ST M95128 XICOR X25043 ST M95256 XICOR X25045
11 Chip Type Name Chip Type Name ST M95512 MICROCHIP 93C06 MICROCHIP 25xx040 NATIONAL NM93C13 NATIONAL NM93C14 NATIONAL NM93CS06 NATIONAL NM93C14TM8 NATIONAL NM93CS46 MICROCHIP 93C46X NATIONAL NM93CS56 MICROCHIP 93C46A NATIONAL NM93CS66 MICROCHIP 93C46 FAIRCHILD FM93CS46T MICROCHIP 93C46AX ST M93C46 MICROCHIP 93C46BX_93C46CX ST M93C56 MICROCHIP 93C56A ST M93C66 MICROCHIP 93C56 ST M93C76 MICROCHIP 93C66A ST M93C86 MICROCHIP 93C66 ST M93S46 MICROCHIP 93C76A ST M93S56 MICROCHIP 93C76 ST M93S66 MICROCHIP 93C86A ATMEL AT59C11 MICROCHIP 93C86 ATMEL AT59C22 ATMEL AT93C46A ATMEL AT59C13 ATMEL AT93C46 OKI MSM16911 ATMEL AT93C46R TMC TMC93LC46 ATMEL AT93C56 TMC TMC93LC56 ATMEL AT93C57 TMC TMC93LC57 ATMEL AT93C66 TMC TMC93LC66
12 Chip Type Name Chip Type Name ATMEL AT93C76 TMC TMC93LC86 ATMEL AT93C86 SONY CXK1011 SONY CXK1012 Seiko S_24S45 SONY CXK1013 TOSHIBA TC89101 Seiko S_24H30 TOSHIBA TC89102 Seiko S_24H30_SOP8 TOSHIBA TC89121 Seiko S_24H45 TOSHIBA TC89122 Seiko S_24H45_SOP8 Xicor X24C44 Seiko S_24S30 9S12 Read/Write Supported Types Chip Type Name FREESCALE MC9S12DG128
13 3 Product Troubleshooting This part describes problems that you may encounter while using the XP201. Vehicle Linking Error A communication error occurs if the XP201 fails to communicate with the diagnostic tools. Please do the following check-ups:  Verify that the diagnostic tool authorization is approved.  Verify that the server works properly.  Verify that the power LED light of the XP201 illuminates solid green. PC Communication Error A communication error occurs if the XP201 fails to communicate with PC. Please do the following check-ups:  Verify that the power LED light of the XP201 illuminates solid green.  Check if there is any firewall software interfering with the connection port or if a wrong USB port is being used.  Check if the green status light for USB communication is blinking. If these issues have been addressed, verified, and you are still having trouble, please contact technical supports for assistance.
14 4 Update Software Update This part describes two ways to update the driver and the software of the XP201. Update via MaxiSys Display Tablet This function allows you to update the XP201 software via MaxiSys Display Tablet. 1. Connect the XP201 to MaxiSys Display Tablet via USB cable. 2. Verify the power LED light on the front panel illuminates solid green. 3. MaxiSys Display Tablet will automatically check the version information of the XP201. 4. Click the Update button on MaxiSys Display Tablet to update the software of the XP201 if there is any update available. Update via PC This function allows you to update the XP201 software via PC. Make sure the PC is connected to the Internet before using this function. 1. Connect the XP201 to a PC via USB cable. 2. Verify the power LED light on the front panel illuminates solid green. 3. Find and click Update Details from Windows Update Information.
15 Figure 4-1 Sample Firmware Update Screen 4. The update agent will automatically check for available update online. 5. Press Next to install the newest firmware. 6. Press Cancel to exit.
16 5 Compliance Information FCC COMPLIANCE FCC ID: WQ8MXPRGXP201 This device complies with Part 15 of the FCC rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: 1. Ce dispositif ne peut causer des interferences; et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
17 used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF WARNING STATEMENT The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The term “IC” before the radio certification number only signifies that IC technical specifications were met. RoHS COMPLIANCE This device is declared to be in compliance with the European RoHS Directive 2011/65/EU. CE COMPLIANCE This product is declared to conform to the essential requirements of the following Directives and carries the CE mark accordingly: EMC Directive 2014/30/EU R&TTE Directive 1999/5/EC Low Voltage Directive 2014/35/EU
18 6 Warranty and Service Limited One Year Warranty Autel Intelligent Technology Corp., Ltd. (the Company) warrants the original retail purchaser of this MaxiProgrammer 201 that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship and results in product failure within 1 year period from the date of delivery, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company’s option, without charge for parts or labor directly related to the defect(s). The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty does not apply to: 1) Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage; 2) Products whose mechanical serial number or electronic serial number has been removed, altered or defaced; 3) Damage from exposure to excessive temperatures or extreme environmental conditions; 4) Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company; 5) Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts. 6) Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft or improper usage of any electrical source.
19 Service Information If you have any questions, please contact your local distributor or visit our website at www.autel.com. If it becomes necessary to return the tool for repair, please download and fill the Technical Support Form from www.auteltech.com, or contact your local distributor for more information. Other Services Accessories can be purchased from Autel authorized suppliers and your local distributors.

Navigation menu