Authinx CM17A User Manual CM17Ains pm6

Authinx Inc. CM17Ains pm6

manual

1. Plug the CM17A into your computer’s serial port2. If something was already plugged into this port,plug it into the CM17A.3. Insert the X-10 disk into drive A and run the Setupprogram to install the software.4. Run the X-10 application.5. A picture of an X-10 remote control appears onyour computer monitor, as shown below.X-10 (USA) Inc.91 Ruckman Rd.,Closter, NJ 07624.www.x10.comMade in ChinaWirelessComputer Interface●Controls up to 256 lights and appliances instantly from your PC, by remote control.●Connects to your PC’s serial port and has a pass-through port so you don’t use up a port.●Works with any X-10 Transceiver (RR501/TM751) or any X-10 Security System, and X-10 Modules.●Requires X-10 Home Automation software (included).●Up to 100 ft. range.Model CM17AFCC ApprovedCM17A-2/25/99The CM17A Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to an X-10 Transceiver(RR501 or TM751) or any X-10 security system base receiver. The receiver then passes the signals onto yourhouse wiring to control lights or appliances around your home. You plug lights and appliances into X-10 Modules(sold separately).F.C.C. CAUTION - THIS DEVICE COMPLIESWITH PART 15 OF THE FCC RULES. OPERATIONIS SUBJECT TO THE FOLLOWING TWOCONDITIONS: (1) THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED, INCLUDINGINTERFERENCE THAT MAY CAUSE UNDESIREDOPERATION.NOTE: NO CHANGES OR MODIFICATIONS MAYBE MADE TO THE UNITS. ANY CHANGESMADE TO THE UNITS WILL VOID THE USER'SAUTHORITY TO OPERATE THE EQUIPMENT.X-10 (USA) INC. LIMITED 1-YEAR WARRANTYX-10 (USA) Inc. warrants X-10 products to be free fromdefective material and workmanship for a period of one(1) year from the original date of purchase at retail.X-10 (USA) Inc. agrees to repair or replace, at it’s solediscretion, a defective X-10 product if returned to X-10(USA) Inc. within the warranty period and with proof ofpurchase.If service is required under this warranty:1. Return the defective unit postage prepaid to X-10(USA) Inc. at the address below.2. Enclose a check for $4.00 to cover postage andhandling.3. Enclose a dated proof of purchase.4. X-10 is not responsible for shipping damage.Units to be returned should be packed carefully.5. For additional warranty information, contact X-10.Use the on-screen remote control just like a regularremote control:6. Click on the Housecode dial to select the sameletter as you set on your Transceiver and Modules.7. Click on the slide switch to select control ofmodules set to 1 thru 8, or 9 thru 16.8. Click the corresponding ON or OFF button to turnthe appropriate X-10 Module on and off.9. To brighten or dim lights connected to X-10 LampModules and Wall Switch Modules, first press thecorresponding number button, then click the UPor DOWN (blue) buttons.

Navigation menu