manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 25816 |
| Application ID | 2o+PMBqkBrFL6a/IsxRedw== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.28kB (90966 bits) |
| Date Submitted | 1999-03-04 00:00:00 |
| Date Available | 1999-03-31 00:00:00 |
| Creation Date | 1999-02-25 14:45:10 |
| Producing Software | Acrobat Distiller 3.01 for Windows |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | CM17Ains.pm6 |
| Document Creator | PageMaker 6.0 |
| Document Author: | daverye |
Wireless Model CM17A Computer Interface FCC Approved ● Controls up to 256 lights and appliances instantly from your PC, by remote control. ● Connects to your PC’s serial port and has a pass-through port so you don’t use up a port. ● Works with any X-10 Transceiver (RR501/TM751) or any X-10 Security System, and X-10 Modules. ● Requires X-10 Home Automation software (included). ● Up to 100 ft. range. The CM17A Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to an X-10 Transceiver (RR501 or TM751) or any X-10 security system base receiver. The receiver then passes the signals onto your house wiring to control lights or appliances around your home. You plug lights and appliances into X-10 Modules (sold separately). 1. Plug the CM17A into your computer’s serial port 2. If something was already plugged into this port, plug it into the CM17A. 3. Insert the X-10 disk into drive A and run the Setup program to install the software. 4. Run the X-10 application. 5. A picture of an X-10 remote control appears on your computer monitor, as shown below. F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. X-10 (USA) INC. LIMITED 1-YEAR WARRANTY X-10 (USA) Inc. warrants X-10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X-10 (USA) Inc. agrees to repair or replace, at it’s sole discretion, a defective X-10 product if returned to X-10 (USA) Inc. within the warranty period and with proof of purchase. Use the on-screen remote control just like a regular remote control: 6. Click on the Housecode dial to select the same letter as you set on your Transceiver and Modules. 7. Click on the slide switch to select control of modules set to 1 thru 8, or 9 thru 16. 8. Click the corresponding ON or OFF button to turn the appropriate X-10 Module on and off. 9. To brighten or dim lights connected to X-10 Lamp Modules and Wall Switch Modules, first press the corresponding number button, then click the UP or DOWN (blue) buttons. If service is required under this warranty: 1. Return the defective unit postage prepaid to X-10 (USA) Inc. at the address below. 2. Enclose a check for $4.00 to cover postage and handling. 3. Enclose a dated proof of purchase. 4. X-10 is not responsible for shipping damage. Units to be returned should be packed carefully. 5. For additional warranty information, contact X-10. X-10 (USA) Inc. 91 Ruckman Rd., Closter, NJ 07624. www.x10.com Made in China CM17A-2/25/99
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 1 Create Date : 1999:02:25 14:45:10 Producer : Acrobat Distiller 3.01 for Windows Author : daverye Creator : PageMaker 6.0 Title : CM17Ains.pm6EXIF Metadata provided by EXIF.tools