Authinx CM19A Wireless Computer Interface/ Transceiver User Manual Exhibit D Users manual per 2 1033 b3

Authinx Inc. Wireless Computer Interface/ Transceiver Exhibit D Users manual per 2 1033 b3

Exhibit D Users manual per 2 1033 b3

Download: Authinx CM19A Wireless Computer Interface/ Transceiver User Manual Exhibit D Users manual  per 2 1033 b3
Mirror Download [FCC.gov]Authinx CM19A Wireless Computer Interface/ Transceiver User Manual Exhibit D Users manual  per 2 1033 b3
Document ID154295
Application ID9eEDIb3R8tZqSlBFveaOLA==
Document DescriptionExhibit D Users manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.75kB (109344 bits)
Date Submitted2001-06-12 00:00:00
Date Available2001-06-08 00:00:00
Creation Date2001-05-16 16:53:20
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-05-30 13:10:00
Document TitleExhibit D Users manual per 2 1033 b3

Wireless Computer Interface/Transceiver
●
●
●
●
●
Model CM19A
Controls up to 256 lights, appliances, and/or cameras instantly from your PC, by remote control.
Works with the TM751 Transceiver and X10 Modules (sold separately).
Works with X10’s PalmPad software (available from www.x10.com/software).
Connects to your PC’s USB port for easy installation.
Up to 50 ft. range.
The CM19A Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to a TM751 Transceiver.
The Transceiver then passes the signals onto your house wiring to control lights, appliances, and/or X10 wireless
cameras around your home. You plug lights and appliances into X10 Modules (sold separately). The CM19A is also
a wireless receiver so you can tell your PC, from any X10 remote control, what cameras you want it to control.
1. Set the TM751 Transceiver to Housecode A. Plug a lamp
or appliance into the TM751. Plug the TM751 into an AC
outlet (use one near your PC for now).
Right-click
on a label to
type in the
name of the
light or
appliance
this button
controls.
2. Download the X10
PalmPad software from:
www.x10.com/software.
3. Install the software as per
its instructions. At the
appropriate point you will
be instructed to plug in
the CM19A.
4. Plug the CM19A into your computer’s USB port.
5. Follow the instructions to complete the installation.
6. Run the X10 PalmPad application.
A picture of an X10 PalmPad remote appears on your
computer monitor. Use the on-screen remote control just like
a regular remote control: Click on 1 to test the Transceiver.
For more information right-click the PalmPad to access the
extensive on-line help. You can also print labels from here to
match those on the on-screen PalmPad remote and place them
on a physical PalmPad (sold separately). You can also turn on
or off sound effects that occur when you press buttons.
Persons with physical disabilities who have software that can
access their keyboard can simply “type” A 1 ON, for example,
to turn on any X10 Module or wireless camera.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE
MADE TO THE UNITS. ANY CHANGES MADE TO THE
UNITS WILL VOID THE USER'SAUTHORITY TO OPERATE
THE EQUIPMENT.
X10.com, a Div. of X10 Wireless Technology, Inc.
1-800-675-3044 sales@x10.com
Click to
change the
Housecode setting
(set it to the same letter
as your TM751 and
X10 Modules).
Click to
turn X10
Module
on or off.
Then click
to dim or
brighten
Lamp or
Wall
Switch
Modules.
Click to control X10
Modules set to 1 thru 8
or 9 thru 16.
LIMITED1-YEARWARRANTY
X10.com, a divisions of X10 Wireless Technology, Inc. (X10)
warrants X10 products to be free from defective material and
workmanship for a period of one (1) year from the original date of
purchase at retail. X10 agrees to repair or replace, at it’s sole
discretion, a defective X10 product if returned to X10 within the
warranty period and with proof of purchase.
If service is required under this warranty:
1. Call 1-800-675-3044 or e-mail sales@x10.com for details on
how to return your unit(s).
2. Enclose a check for $4.00 for postage and handling.
3. Enclose a dated proof of purchase.
4. X10 is not responsible for shipping damage.
Units to be returned should be packed carefully.
5. For additional warranty information, contact X10.
CM19A-5/01

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:05:16 16:53:20
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:05:30 13:10:00-04:00
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: B4SCM19A

Navigation menu