Authinx K24945 FIND ONE FIND ALL (FOFA) KEYFOB User Manual FOFA IS pmd

Download:
Mirror Download [FCC.gov]
Document ID	547309
Application ID	N2P0a9oQD+j3wj+XzDDZSQ==
Document Description	MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.28kB (90960 bits)
Date Submitted	2005-06-01 00:00:00
Date Available	2005-05-31 00:00:00
Creation Date	2005-05-27 16:41:44
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-05-31 08:26:25
Document Title	FOFA-IS.pmd
Document Creator	PageMaker 7.0
Document Author:	Dave Rye

Find One Find All (FOFA) Keyfob, Model K24945
Your FOFA Keyfob requires only 3
simple steps to begin using it:
1. Insert the battery.
2. Program the FOFA.
3. Attach FOFA to an item.
P 1/2
The FOFA Keyfob will beep and immediately go into
setup mode. The LED will begin flashing to indicate
that the FOFA Keyfob is ready to be programmed.
Please see step 2, Programming your FOFA Keyfob.
2. Programming your FOFA Keyfob
FOFA locators are expandable to 36 unique locators.
How is this possible with only 6 buttons? You have 6
sets of 6 items. This gives you the flexibility to
customize your FOFA locators so that each person in
the family has a different set of FOFA’s.
To set the FOFA Keyfob, you must first decide on the
“SET” number and the “ITEM” number of each
FOFA. Most first-time users select SET 1 and ITEMS
1-6.
P 2/2
3. Attaching the FOFA
Care Instructions
Each FOFA Keyfob includes a key ring. In addition, a
plastic lanyard and doublesided tape can also be used
to attach FOFA Keyfob to any object that you could
lose.
- Do not allow FOFA to become wet. Wipe dry
immediately if it gets wet.
- FOFA may be wiped with a damp cloth to clean.
- Handle FOFA with care. Do not drop.
Using the FOFA Keyfob to Find Lost Items
The FCC wants you to know
The FOFA Keyfob will beep to confirm your settings.
The FOFA Keyfob beeps the number corresponding
to the SET # and then, after a brief pause, beeps the
number of times corresponding to the ITEM #.
To find an object with a missing FOFA Keyfob
attached, simply locate one of your other FOFA
Keyfobs and press the key corresponding to the
missing unit in that set. If the object is in range, the
FOFA Keyfob on the missing object will begin to
flash and beep. You can use any FOFA Keyfob to
locate any other FOFA Keyfob; hence the name, Find
One, Find All!
To program FOFA Keyfob as Set 2, Item 5, for
example, you would:
To find a missing item in another set of FOFAs, you
will need to reprogram one of your FOFA Keyfobs to
that set. Please see Programming your FOFA Keyfob.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: 1.
This device may not cause harmful interference; 2.
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment generates and uses radio
frequency energy, and if not installed and used
properly, that is, in strict accordance with the
manufacturers instructions, it may cause interference
to radio and television reception. It has been type
tested and found to comply with the limits for remote
control devices in accordance with the specifications
in Sub-Parts B and C of Part 15 of FCC Rules, which
are designed to provide reasonable protection against
such interference in a residential installation.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause interference to radio or television
reception, which can be determined by unplugging
the equipment, try to correct the interference by one
or more of the following measures.
If you just inserted the battery, you are already in
setup mode. To enter the setup mode at any other
time, press and hold the 1 and 3 buttons
simultaneously for about 3 seconds. The FOFA
Keyfob is in setup mode when the LED flashes
continuously and a warble beep is emitted.
To set:
1. Insert the Battery
Your FOFA Keyfob comes with one
CR2032 type battery. To install the
battery:
• Open the battery compartment on
the back
• Insert the battery with the “+”
(positive) side up.
• Close the battery compartment
Find One Find All (FOFA) Keyfob, Model K24945
• Press the button (1 thru 6) to program the SET#.
The FOFA Keyfob will beep and the LED will
flash more quickly.
• Press the button (1 thru 6) to program the ITEM#.
• Press 2. This programs the SET number to 2. The
LED flashes quickly.
• Press 5. This programs the ITEM number to 5. The
FOFA Keyfob beeps and flashes 2 times, pauses,
and then beeps 5 times to confirm the setting.
For best results, hold the FOFA Keyfob with the LED
pointing away from you. Walk around while trying to
find the item you’re looking for while repeatedly
pressing the appropriate button on the FOFA Keyfob.
Reduce or eliminate noises so you can hear the
beeping FOFA Keyfob you are looking for.
Important Notes:
Removing the battery will cause your FOFA Keyfob
to lose its setting. You will need to reprogram it using
the steps above.
If you do not program the FOFA Keyfob, it will
respond to every key press from another FOFA unit.
However, the unprogrammed FOFA Keyfob will enter
setup mode when you press any button on it.
FOFA K24945 1-2
Keep the FOFA Keyfob away from large metal
objects and other radios sources that might reduce its
range, as do weak batteries also.
Checking Your Setup
You can verify the SET and ITEM numbers of each
FOFA Keyfob at any time. Press and hold the 5 and 6
keys simultaneously, then release. The LED flashes
and beeps first to indicate the SET number, pauses,
and then flashes and beeps to indicate the ITEM
number. For example, if the FOFA Keyfob you are
checking is defined as SET 1, ITEM 2, you would
hear 1 beep, a pause, then 2 more beeps.
• Reorient the antenna of the radio/TV experiencing
the interference.
• Relocate the equipment with respect to the radio/TV.
• Move the equipment away from the radio/TV.
• Plug the equipment into an outlet on a different
electrical circuit from the radio/TV experiencing the
interference.
• If necessary, consult your local dealer for additional
suggestions.
The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.
FOFA K24945 2-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:5c58298b-df17-44e1-afcb-d9c2c9536bff
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2005:05:27 16:41:44Z
Modify Date                     : 2005:05:31 08:26:25-04:00
Metadata Date                   : 2005:05:31 08:26:25-04:00
Creator Tool                    : PageMaker 7.0
Document ID                     : uuid:6a47d3cd-69f5-47aa-9037-d61b340f0c59
Format                          : application/pdf
Creator                         : Dave Rye
Title                           : FOFA-IS.pmd
Author                          : Dave Rye

EXIF Metadata provided by EXIF.tools