Authinx ZRF1 Universal Remote Control User Manual Exhibit D Users Manual per 2 1033 b3

Authinx Inc. Universal Remote Control Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

ZRF1PLAYSTOP PAUSEREC234567890SUBTITLEREPEATPOWER1CHANCHANVOLVOLSCAN SCANSAT AUXVCRDVDTVCODESEARCHPAGEPAGEHELPRATIOSD/HDFLASHBKDATEGUIDEINFOEXITMENUOKSKIPSURFSIGNALINPUT
32IntroductionTable of ContentsCongratulations on your purchase of a Zenith UniversalRemote Control. Zenith Universal Remotes let youreplace a broken or lost remote or combine more thanone remote into one.This remote control operates the common features ofmost but not all models and brands of IR InfraredControlled Video Equipment. This remote may providefunctions that are not available on your equipment.Some functions of your particular equipment (e.g. menufunctions) may not be controlled by this remote.In such cases, use the original remote control for yourequipment. Please use this manual to become familiarwith your Zenith Universal Remote. After you arefamiliar with your remote the first thing you need to do isto install batteries and setup your remote for yourparticular product and brand.Introduction ...................................................... 3Setup ............................................................... 4Battery Installation ....................................... 4Battery Saver............................................... 4Code Saver ................................................. 4Power-On default ........................................ 4TV Punch Through Feature .......................... 5VCR/DVD Punch Through Feature .............. 5Code Setup ................................................. 5Button Functions ............................................... 6Advanced Functions ......................................... 8DirecTV Functions ....................................... 8SAT Functions ............................................. 9DVD Functions .......................................... 10VCR/DVD Punch Through Feature ............ 11TV/VCR/INPUT ....................................... 11TV/VCR and TV/DVD Combo units ......... 11Code Entry..................................................... 12Direct Code Entry...................................... 12Code Search ............................................. 13Brand Search............................................. 14Code Identification Feature ........................ 16Product Operation .......................................... 17RF Receiver ................................................... 18Troubleshooting .............................................. 19The remote also transmits wireless Radio Frequency(RF) commands. The wireless receiver (included)receives these commands and converts them to regularInfrared (IR) commands. These IR commands are thenemitted from the IR Extender (also included) to controlyour A/V components. This lets you control your A/Vcomponents from ANY room in your home - you don’tneed to aim the remote at your component!Thank you for buying a Zenith remote and we hope itwill give you many years of service.FCC CautionTHIS DEVICE COMPLIES WITH PART 15 OF THE FCCRULES. OPERATION IS SUBJECT TO THE FOLLOW-ING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFER-ENCE RECEIVED, INCLUDING INTERFERENCE THATMAY CAUSE UNDESIRED OPERATION.This equipment generates and uses radio frequencyenergy, and if not installed and used properly, that is, instrict accordance with the manufacturers instructions, itmay cause interference to radio and television reception.It has been type tested and found to comply with thelimits for remote control devices in accordance with thespecifications in Sub-Parts B and C of Part 15 of FCCRules, which are designed to provide reasonableprotection against such interference in a residentialinstallation. However, there is no guarantee that interfer-ence will not occur in a particular installation. If thisequipment does cause interference to radio or televisionreception, which can be determined by unplugging theequipment, try to correct the interference by one or moreof the following measures.• Reorient the antenna of the radio/TV experiencing theinterference.• Relocate the interface with respect to the radio/TV.• Move the interface away from the radio/TV.• Plug the interface into an outlet on a different electricalcircuit from the radio/TVexperiencing the interference.• If necessary, consult your local Dealer for additionalsuggestions.NOTE: Modifications to any of the components in thiskit will void the user’s authority to operate thisequipment.
5423456789SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIOSD/HDVCRCHANCHANVOLVOLDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTTV Volume/Mute Punch-Through FeatureThe TV Volume/Mute punch-through feature lets youcontrol the Volume and Mute function of your TV in anymode programmed to be a VCR, DVD, CABLE or SATdevice, without needing to change to TV mode.VCR/DVD Punch-Through FeaturePunch-through to VCR/DVD mode i.e. the 6 keys (PLAY,PAUSE, STOP, FF, REWIND, and REC) is only allowedin modes programmed for TV or Cable codes.Code SetupThe CODE SEARCH button is used to setup the remote.You can either setup the remote using the code for yourbrand of product, from the code tables (on separatesheet), or you can search through the library of codesuntil you find a code that works for your product.Please refer to “Programming with Code Search” on page13 for more information on using the code search featureto learn how to search through the library of codes foryour products.NOTE: You can store any kind of code under any mode(except TV). I.E. you can store a VCR code under theDVD button, or a DVD code under the VCR button, etc.However, you can only store TV codes under the TVbutton.CODE SEARCHBattery Installation1. On the back of the remote,push down on the tab andlift the cover off.2. Match the batteries to the+ and - marks inside thebattery case, then insert 2AAA Alkaline batteries.3. Press the battery coverback into place.Battery SaverYour remote automaticallyturns off if the buttons aredepressed more than 30seconds. This will save yourbatteries should your remoteget stuck in a place where thebuttons remain depressed(e.g., between the sofacushions).Code SaverYou will have up to 10 minutes to change the batteriesin your remote without losing codes you haveprogrammed. However, do not press any buttons untilbatteries are installed in the remote. If buttons arepressed without batteries in the remote, all codes will belost.Power-On DefaultThe remote powers on in SAT mode.Setup Setup, cont.
76PLAYSTOP PAUSEREC234567890SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIOSD/HDVCRCHANCHANVOLVOLOKSCAN SCANGUIDEINFOEXITMENUSKIPDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTPLAYSTOP PAUSEREC234567890SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIO SD/HDVCRCHANCHANVOLVOLOKSCAN SCANGUIDEINFOEXITMENUSKIPDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTVOLUME UP/DOWN Changesthe volume levelof the product,normally the TV.CHANNEL UP/DOWN Changesthe channels.RECORD, PLAY,STOP, REW, FF,PAUSE VCR controlbuttons operateyour VCR evenwhen the remote isset to operate theTV. Also operatesDVD Scan -/+.EXIT Used to exitmenu functions.Button Functions, cont.Some buttons on the remote might have functions thatare referred to by different names on the device you arecontrolling. E.G. FLASHBK may be called RECALL, orENTER may be called DISPLAY. These differences dependon the brand and model of your product. Also, thisremote can only operate features that exist on yourproduct. E.G., your product must have FLASHBK abilityfor the FLASHBK button to operate this feature.TV, VCR, SAT, DVD,AUX Selects product tobe operated.NUMBERSEnter numbers for directchannel selection. Someproducts require Enter tobe pressed after channelselection.POWER Turnsproduct On orOff.MUTE Turns offthe TV soundwhile the pictureremains.MENU Access theMenu functions ofthe device you arecontrolling.CODE SEARCHFor setup.Note: The REC button must be pressed TWICE torecord from your VCR. For some brands of VCRs, youmight need to press the REC button once, then press itagain for three seconds.Button FunctionsRed Indicator Lights whenany button is pressed.OKSelects menu items for thedevice you are controlling.CC (SUBTITLE)TV ClosedCaption (if yourTV has thisfeature) or DVDSubtitle toggle.SELECT (ENTER)Used after directchannel numberentry to immediatelychange to theselected channel.FLASHBKReturns to thepreviouslyselected channel, orDVD repeat toggle.SKIP controls DVD skip (inDVD mode). Note the VCRbuttons also control DVDwhen in DVD Mode.SIGNAL/INPUTFor some TVs, pressrepeatedly to selectfrom available viewingsources (antenna,cable box, VCR, etc.).INFO DisplaysChannel Bannerinformation inDirecTV mode.GUIDE Displays onscreenprogram guide
98Advanced Functions Advanced Functions, cont.DASH (-) Used to enter a channel number for multiplechannels such as 2-1, 2-2, etc. A broadcaster maytransmit multiple programs on a single channel. Multipleprograms are distinguished by a unique sub-channelnumber, separated by a dash (-).SEL (SELECT) Use with numbered buttons for instantchannel selection. When you press a channel number,for example 22, the receiver awaits another button pressfor three seconds and then tunes to 22.SURF Shows the list of your Surf channels. A Surfchannel list can contain up to 50 channels. You canreturn to normal viewing by pressing the EXIT button orby pressing the SURF button again.INFO Press this button when you are watchingDirecTV® programming to display the Channel Bannerinformation and information about the current program.Press again to remove the banner, or wait 10 seconds.You can select the display mode, short or detailed, bypressing the navigate up and down arrows. You can alsochange the audio language, when available, by pressingthe left and right navigation buttons.HELP Shows the on-screen “EZ Help” menu while youare in normal viewing, or in an on-screen menu. To seethe help description of the selected option in the menu,press and hold the HELP button.NAVIGATION (UP, DOWN, LEFT, RIGHT arrows) Letsyou navigate the on-screen menus and adjust thesystem settings and preferences, by moving to menuoption with the up, down, left, right buttons andselecting the highlighted option with the button with acircle on it (in the center of the navigation buttons). Ifthis button is pressing while in normal view, the informa-tion banner is displayed.RATIO Changes the picture aspect ratio. When youview a picture with a wide (16:9) aspect ratio in 480i or480p format, this button changes the display optionsfrom Letterbox, to Cropped, to Squeezed, and back toLetterbox. When you view a picture with a normal (4:3)aspect ratio in 720p or 1080i format, this button changesthe display options from Normal, to Wide, to Panorama,to Zoom1, to Zoom2, and back to Normal. Detaileddescriptions of the TV aspect ration are given in TVaspect ration section of the Preferences Menu.SIGNAL Shows the signal strength of the currentchannel. For digital over-the-air or satellite channels youmy be able to improve the signals strength by adjustingthe direction of your over-the-air antenna.SD/HD Set the output resolution of the SD (480i format)and pre-selected HD (480p, 720p, 1080i, native, hybrid-1,and hybrid-2 formats), If you want to use VCR recording,set to STD format. Note, pressing SD/HD, then theLEFT navigation button, then SEL, will always causethe receiver to output SD (480i) display format. PressingSD/HD, then the RIGHT navigation button, then SEL,will always cause the receiver to operate in the pre-selected HD display format. I.E. the buttons will work nomatter what format had been selected.FLASHBK (Flash Back) Returns to the last channelviewed. Lets you move back and forth between the lasttwo channels viewed.CC/DATE (Closed Caption) Lets you turn closedcaption on and off. The closed caption mode can beselected in the Closed Caption section of the Preferencemenu. You can also change the date by pressing the CC/DATE button in the Advanced Program Guide. ™Note, Close Caption will only appear when it is providedby the broadcaster.GUIDE button displays on-screen Satellite ChannelGuide.CHANNEL+ and CHANNEL- buttons perform the“Page+” and “Page-” function for on-screen GuideMenus used by some Satellite systems.MENU brings up the Satellite Menu screen - use with theUP, DOWN, LEFT & RIGHT navigation buttons.OK button is used for on-screen Menu selection.EXIT button is used to Exit or Clear on-screen Menudisplays.
1110Advanced Functions, cont. Advanced Functions, cont.VCR/DVD Punch Through FeatureThis remote lets you Punch-through to the last VCR orDVD device used. Normally other types of remotes onlypunch-through (from another Mode) on the 6 VCRbuttons, to the device programmed under the VCRMode button. This is not much use if you are using aDVD programmed under a Mode other than VCR. Thisremote punches-through to the last VCR or DVD deviceyou used. For example, if you have 3 DVD/VCR devicesprogrammed into this remote, the last one you accessedon the remote will be the one that has control of the 6VCR/DVD buttons when in any other mode.TV/VCR/INPUTWhen in TV mode the SIGNAL/INPUT button performsthe INPUT source switch function.When in a mode that has been programmed for VCR theSIGNAL/INPUT button performs the TV/VCR antennaswitch function.When in a mode that has been programmed for Cable theSIGNAL/INPUT button performs the A.B switchfunction.When in a mode that has been programmed for SAT theSIGNAL/INPUT button performs the TV/SAT switchfunction.When in a mode that has been programmed for DVD theSIGNAL/INPUT button performs the DVD Setupfunction.TV/VCR and TV/DVD Combo unitsNote that for some TV/VCR and TV/DVD combo unitsyou might need to set up two different buttons tocontrol both parts of the combo unit. E.G., (referring tothe Direct Code Entry section on the following page)you might need to set up a code under the TV button tocontrol the TV part of the combo unit AND a separatecode for the VCR or DVD under any other button youchoose.DVD FunctionsSCAN+ and SCAN- buttons control the speed of FastForward and Reverse Playback respectively.SKIP+ and SKIP- buttons respectively locate thesucceeding or preceding Chapters or Tracks on a disc.SUBTITLE button turns the subtitles on or off.REPEAT button performs DVD players “A-B Repeat” (orRPT A.B) function for repeat play of current Chapter orTrack.MENU brings up the DVD disc Menu screen - use withthe UP, DOWN, LEFT & RIGHT navigation buttons.OK button is used for on-screen Menu selection. Notesome DVD players require the PLAY button to be used.EXIT button is used to Exit or Clear on-screen Menudisplays.PLAY button is used to start Disc playback and forMenu selection on some DVD players.STOP button stops Disc playback.PAUSE button pauses Disc playback - press PLAY toresume.INPUT (SIGNAL INPUT) activates the DVD Player’sSETUP Menu.
131223456SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIOSD/HDVCRCHANCHANVOLVOLDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTProgramming with Code SearchIf your product does not respond after you have tried allthe codes for your brand, or if your brand is not listed,try searching for your code by following these steps.1. Manually turn on the device (TV, VCR, etc.) to becontrolled.2. Press and hold the CODE SEARCH button until thered indicator stays on, then release the CODESEARCH button.3. Press and quickly release the desired mode button(TV, VCR, etc.). The red indicator blinks off once.4. Press the CHANNEL UP button repeatedly (up to 300times) until the device to be controlled changeschannel. The red indicator blinks off with eachbutton press. If you accidentally overshoot thecode required, press the CHANNEL DOWN buttonto backtrack through the library until the devicechanges channel. Pressing CHANNEL UP changesdirection to forward again.5. Press and release MUTE to install the code.Most users will store VCR codes under the VCR button,DVD codes under DVD, etc. If (for example) you want tostore a VCR code under DVD, first follow the procedurefor Direct Code Entry (page 12) and press DVD in step 2of Direct Code Entry, then enter ANY VCR code in step 3of Direct Code Entry. Then follow the steps above forCode Search (or Brand Search, next page).Note: If the device does not have a CHANNEL UPbutton, use PLAY (VCR only) or POWER instead. CodeSearch starts from the currently stored three digitnumber under that mode.2.3.4.Code Entry, cont.5.23456789SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIO SD/HDVCRCHANCHANVOLVOLDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTDirect Code Entry1. Press and hold the CODE SEARCH button until thered indicator stays on, then release the CODESEARCH button.2. Press and release the desired mode button (TV, VCR,etc.). The red indicator blinks, then stays lit.3. Enter the 3 digit code from the code tables (onseparate sheet). Note: after a valid code entry, thered indicator turns off. For an invalid code, the redindicator flashes.4. With your device on, press CHANNEL UP. If thedevice responds, no further programming isrequired. Note: If some buttons do not operate yourequipment, try one of the other codes for yourbrand.Code Entry1.2.3.Write your codes down here for easy reference later.Type Type stored CodeTV TVVCRSAT 363DVD
1514Code Entry, cont.Brand Search TableLook up your brand in the appropriate column (TV, VCR,etc.). Look to see what digit (1, 2, 3, etc.) applies to yourbrand, and enter it in step 4 of “Code Search by Brand”on the previous page.DIGIT1234567890TVRCA, GE, PROSCANZENITHPHILIPS, MAGNAVOXSONY, PANASONIC,SHARP, TOSHIBA,DAEWOOHITACHI, SANYO,JVC, LG-GOLDSTAR,SAMSUNG,MITSUBISHISYLVANIA, CURTIS-MATHES, FISHER,EMERSONN/AN/AN/AALLVCR/DVD/DVRRCA, GE, PROSCANZENITH, APEXPHILIPS, MAGNAVOX,MARANTZSONY, PANASONIC,SHARP, TOSHIBA,DAEWOO, YAMAHA,DENONHITACHI, SANYO,JVC, LG-GOLDSTAR,SAMSUNG,MITSUBISHISYLVANIA, CURTIS-MATHES, FISHER,EMERSONN/AN/AN/AALLCABLESCIENTIFIC ATLANTAJERROLDGENERALINSTRUMENT, TOCOMRCA, GE, PROSCAN,PIONEERZENITH, GEMINIPHILIPS, MAGNAVOXN/AN/AN/AALLSAT/DBSRCA, GE, PROSCAN,PIONEERZENITH, GEMINIPHILIPS, MAGNAVOXSONY, PANASONIC,TOSHIBA, SHARPHITACHI, JVC,SAMSUNGGENERALINSTRUMENT,ECHOSTAR, DISH,HUGHES, PRIMESTARN/AN/AN/AALLCD/AUDIORCA, GE, PROSCANZENITHPHILIPS, MAGNAVOX,MARANTZSONY, PANASONIC,TECHNICS, SHARP,TOSHIBAHITACHI, SANYO, JVC,LG-GOLDSTAR,SAMSUNG, MITSUBISHISYLVANIA, CURTIS-MATHES, FISHER,EMERSON, OPTIMUSPIONEER, TEAC, NADKENWOOD, YAMAHA,DENON, ONKYON/AALL23456789SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIO SD/HDVCRCHANCHANVOLVOLDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTCode Search by BrandLets you search for a code for a specific Brand withinthe Code Library for a particular manufacturer.1. Turn on the device (TV, VCR, etc.) to be controlled.2. Press and hold the CODE SEARCH button until thered indicator remains on, then release CODESEARCH button.3. Press and quickly release the desired mode button(TV, VCR, etc.). The red indicator blinks off once.4. Press and release the numeric button (0-9)corresponding to desired Manufacturer (see table onnext page). The red indicator blinks off once. Note,pressing “0” performs a full library search same asnormal Code Search Method on previous page.5. Press the CHANNEL UP button ((or POWER or PLAY(VCR only)) repeatedly until the device to becontrolled changes channel. The red indicator blinksoff with each button press. If you accidentallyovershoot the code required, press the CHANNELDOWN button to backtrack through the library untilthe device changes channel. Pressing CHANNEL UPchanges direction to forward again.6. Press and release MUTE to install the code.Brand Search Method entry is now complete.Note: When all codes under a Brand have been searchedthe red indicator flashes rapidly for 3 seconds.Code Entry, cont.2.3.5.4.6.
1716To Operate:1. Press the TV, VCR, SAT, DVD,etc. button (depending onwhich product you want tooperate).2. Aim the remote at the product.3. Press POWER to turn on theproduct.4. Press other buttons to operatethe features of your product.After the batteries are installed and you haveprogrammed the remote for the codes that operate yourproducts, you can use your remote to operate a TV, VCR,Satellite Receiver, DVD Player, etc.TV (Press TV First)VCR(Press VCR First) Satellite Receiver(Press SAT first)Product OperationDVD Player(Press DVD first)PLAYSTO PPAUSEREC234567890SU BTITLERE PEA THELPPOWERSATFLA SHB K1AUXRA TIOSD /HDVCRCHANCHANVOLVOLOKSC ANSC ANGU IDEINF OEX ITME NUSK I PDVDTVCO DESE A RC HPA G EPA G EDATESU RFSIG N ALIN PUT23456789SUBTITLEREPEATHELPPOWERSATFLASHBK1AUXRATIO SD/HDVCRCHANCHANVOLVOLDVDTVCODESEARCHPAGEPAGEDATESURFSIGNALINPUTCode Identification FeatureThe Code Identification Feature allows you to identifythe three digit library code stored under your device key.For example, if you want to find out what three digitcode is stored under your TV device key, follow the sixsteps below:1. Press and hold the CODE SEARCH button until thered indicator stays on. Release the CODE SEARCHbutton.2. Press and release the desired mode button (TV,VCR, etc.). The red indicator blinks, then stays lit.3. Press and release the CODE SEARCH button. Thered indicator blinks off.4. To find the first digit for the code stored under themode key pressed in step 2, press each numeric keyfrom 0-9 in turn. When the red indicator blinks offthe number you pressed is the first digit for the codeyou are searching for.5. To find the second digit, repeat step 4, this timewhen the red indicator blinks off this is the seconddigit.6. Repeat step 4 again to find the third digit.Code Identification1, 3.2.4, 5, 6.
1918TroubleshootingRemote does not operate your product.• Press the mode button of the product you want tocontrol.• Program the remote with a new code.• Install new batteries. (You might have to reprogramyour remote after installing new batteries.)• Remote may not be compatible with your product.Remote does not operate some features of your product.• Program remote with a new code.• Remote may not be able to operate all features ofyour product or button names might be differentthan your product.Red Indicator blinks after you program a product code.• Remote did not accept the code.• Try to program the code again or try a differentcode.Wireless ReceiverThe remote transmits wireless Radio Frequency (RF)commands. The wireless receiver (included) receivesthese commands and converts them to regular Infrared(IR) commands. These IR commands are then emittedfrom the IR Extender (also included) to control your A/Vcomponents. This lets you control your A/Vcomponents from ANY room in your home - you don’tneed to aim the remote at your component!Connect the plug-in powersupply (included) to this jackand plug the power supplyinto any 120V AC outlet.Connect the IR Extender cord(included) to this socket andattach the IR emitters to thefront of the components youwant to control.AntennaIR emitters
ZRF1BackCover ArtThis product is manufactured to ZENITH specificationsand is free from defects in material, workmanship andassembly. This warranty extends only to the originalpurchaser and is nontransferable. Should a defect occurunder normal operating conditions within 90 days fromthe date of purchase, ZENITH will provide a comparablereplacement free of charge within the warranty period, tothe original purchaser. Defective product must bereturned, with the dated proof of purchase, to the placeof purchase for replacement. This warranty does notextend to the product if it has been damaged or rendereddefective as a result of accident, misuse, abuse, tamper-ing with or modification. THIS WARRANTY IS IN LIEUOF ALL OTHER WARRANTIES, EXPRESS OR IM-PLIED, INCLUDING THE IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICU-LAR PURPOSE. IN NO EVENT SHALL ZENITH BELIABLE FOR SPECIAL, INDIRECT, INCIDENTAL ORCONSEQUENTIAL DAMAGES, WHETHER IN CON-TRACT, TORT OR NEGLIGENCE. Some States do notallow limitations on how long an implied warranty lasts,so the above limitation may not apply to you. SomeStates do not allow exclusion or limitation of incidentalor consequential damages, so the above limitation orexclusion may not apply to you. This warranty givesyou specific rights and you may also have other rights,which vary from State to State.Made in China-TC, Quality Assured in USAClifton, NJ 07014-111590 Day Warranty

Navigation menu