Authinx ZRF1 Universal Remote Control User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	338835
Application ID	3BpCXR6fHLrJhyBYkRekDA==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.07kB (225829 bits)
Date Submitted	2003-07-10 00:00:00
Date Available	2003-07-10 00:00:00
Creation Date	2003-07-07 13:31:17
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2003-07-07 13:31:17
Document Title	Exhibit D Users Manual per 2 1033 b3

CODE
SEARCH
VCR
TV
SAT
POWER
DVD
AUX
CHAN
PAGE
VOL
VOL
SUBTITLE
REPEAT
PAGE
FLASHBK
RATIO
DATE
CHAN
SURF
SIGNAL
IN PUT
HELP
SD/HD
INFO
GUIDE
OK
MENU
EXIT
SCAN
SKIP
PLAY
SCAN
REC
STOP
PAUSE
ZRF1
Table of Contents
Introduction ...................................................... 3
Setup ............................................................... 4
Battery Installation ....................................... 4
Battery Saver ............................................... 4
Code Saver ................................................. 4
Power-On default ........................................ 4
TV Punch Through Feature .......................... 5
VCR/DVD Punch Through Feature .............. 5
Code Setup ................................................. 5
Button Functions ............................................... 6
Advanced Functions ......................................... 8
DirecTV Functions ....................................... 8
SAT Functions ............................................. 9
DVD Functions .......................................... 10
VCR/DVD Punch Through Feature ............ 11
TV/VCR/INPUT ....................................... 11
TV/VCR and TV/DVD Combo units ......... 11
Code Entry ..................................................... 12
Direct Code Entry ...................................... 12
Code Search ............................................. 13
Brand Search ............................................. 14
Code Identification Feature ........................ 16
Product Operation .......................................... 17
RF Receiver ................................................... 18
Troubleshooting .............................................. 19
Congratulations on your purchase of a Zenith Universal
Remote Control. Zenith Universal Remotes let you
replace a broken or lost remote or combine more than
one remote into one.
This remote control operates the common features of
most but not all models and brands of IR Infrared
Controlled Video Equipment. This remote may provide
functions that are not available on your equipment.
Some functions of your particular equipment (e.g. menu
functions) may not be controlled by this remote.
In such cases, use the original remote control for your
equipment. Please use this manual to become familiar
with your Zenith Universal Remote. After you are
familiar with your remote the first thing you need to do is
to install batteries and setup your remote for your
particular product and brand.
Introduction
The remote also transmits wireless Radio Frequency
(RF) commands. The wireless receiver (included)
receives these commands and converts them to regular
Infrared (IR) commands. These IR commands are then
emitted from the IR Extender (also included) to control
your A/V components. This lets you control your A/V
components from ANY room in your home - you don’t
need to aim the remote at your component!
Thank you for buying a Zenith remote and we hope it
will give you many years of service.
FCC Caution
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency
energy, and if not installed and used properly, that is, in
strict accordance with the manufacturers instructions, it
may cause interference to radio and television reception.
It has been type tested and found to comply with the
limits for remote control devices in accordance with the
specifications in Sub-Parts B and C of Part 15 of FCC
Rules, which are designed to provide reasonable
protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television
reception, which can be determined by unplugging the
equipment, try to correct the interference by one or more
of the following measures.
• Reorient the antenna of the radio/TV experiencing the
interference.
• Relocate the interface with respect to the radio/TV.
• Move the interface away from the radio/TV.
• Plug the interface into an outlet on a different electrical
circuit from the radio/TV
experiencing the interference.
• If necessary, consult your local Dealer for additional
suggestions.
NOTE: Modifications to any of the components in this
kit will void the user’s authority to operate this
equipment.
Setup
Setup, cont.
Battery Installation
TV Volume/Mute Punch-Through Feature
1. On the back of the remote,
push down on the tab and
lift the cover off.
2. Match the batteries to the
+ and - marks inside the
battery case, then insert 2
AAA Alkaline batteries.
3. Press the battery cover
back into place.
The TV Volume/Mute punch-through feature lets you
control the Volume and Mute function of your TV in any
mode programmed to be a VCR, DVD, CABLE or SAT
device, without needing to change to TV mode.
VCR/DVD Punch-Through Feature
Punch-through to VCR/DVD mode i.e. the 6 keys (PLAY,
PAUSE, STOP, FF, REWIND, and REC) is only allowed
in modes programmed for TV or Cable codes.
Battery Saver
Your remote automatically
turns off if the buttons are
depressed more than 30
seconds. This will save your
batteries should your remote
get stuck in a place where the
buttons remain depressed
(e.g., between the sofa
cushions).
Code Setup
The CODE SEARCH button is used to setup the remote.
You can either setup the remote using the code for your
brand of product, from the code tables (on separate
sheet), or you can search through the library of codes
until you find a code that works for your product.
Please refer to “Programming with Code Search” on page
13 for more information on using the code search feature
to learn how to search through the library of codes for
your products.
NOTE: You can store any kind of code under any mode
(except TV). I.E. you can store a VCR code under the
DVD button, or a DVD code under the VCR button, etc.
However, you can only store TV codes under the TV
button.
Code Saver
CODE
SEARCH
POWER
CODE SEARCH
VCR
TV
SAT
DVD
PAGE
VOL
REPEAT
Power-On Default
AUX
CHAN
VOL
You will have up to 10 minutes to change the batteries
in your remote without losing codes you have
programmed. However, do not press any buttons until
batteries are installed in the remote. If buttons are
pressed without batteries in the remote, all codes will be
lost.
SUBTITLE
PAGE
FLASHBK
The remote powers on in SAT mode.
RATIO
DATE
CHAN
SURF
SIGNAL
INPUT
HELP
SD/HD
Button Functions, cont.
Button Functions
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. FLASHBK may be called RECALL, or
ENTER may be called DISPLAY. These differences depend
on the brand and model of your product. Also, this
remote can only operate features that exist on your
product. E.G., your product must have FLASHBK ability
for the FLASHBK button to operate this feature.
Red Indicator Lights when
any button is pressed.
CODE SEARCH
For setup.
TV, VCR, SAT, DVD,
AUX Selects product to
be operated.
MENU Access the
Menu functions of
the device you are
controlling.
MUTE Turns off
the TV sound
while the picture
remains.
POWER
DVD
AUX
SAT
DVD
PAGE
CC (SUBTITLE)
TV Closed
Caption (if your
TV has this
feature) or DVD
Subtitle toggle.
AUX
VOL
VCR
TV
VOL
INFO Displays
Channel Banner
information in
DirecTV mode.
SAT
VOLUME UP/
DOWN Changes
the volume level
of the product,
normally the TV.
CHAN
CHAN
REPEAT
PAGE
SUBTITLE
PAGE
VOL
SUBTITLE
PAGE
NUMBERS
Enter numbers for direct
channel selection. Some
products require Enter to
be pressed after channel
selection.
VCR
POWER Turns
product On or
Off.
POWER
REPEAT
SIGNAL/INPUT
For some TVs, press
repeatedly to select
from available viewing
sources (antenna,
cable box, VCR, etc.).
CODE
SEARCH
TV
CODE
SEARCH
VOL
FLASHBK
Returns to the
previously
selected channel, or
DVD repeat toggle.
CHANNEL UP/
DOWN Changes
the channels.
FLASHBK
RATIO
DATE
CHAN
SURF
SIGNAL
INPUT
HELP
SD/HD
FLASHBK
RATIO
SIGNAL
INPUT
HELP
SD/HD
SELECT (ENTER)
Used after direct
channel number
entry to immediately
change to the
selected channel.
IN FO
GUIDE
GUIDE Displays onscreen
program guide
OK
GUIDE
MENU
OK
MENU
SURF
IN FO
DATE
CHAN
EXIT
EXIT Used to exit
menu functions.
SKIP
EXIT
SKIP
SCAN
PLAY
SCAN
REC
STOP
PAUSE
SCAN
PLAY
REC
STOP
SCAN
PAUSE
SKIP controls DVD skip (in
DVD mode). Note the VCR
buttons also control DVD
when in DVD Mode.
RECORD, PLAY,
STOP, REW, FF,
PAUSE VCR control
buttons operate
your VCR even
when the remote is
set to operate the
TV. Also operates
DVD Scan -/+.
OK
Selects menu items for the
device you are controlling.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Advanced Functions
DASH (-) Used to enter a channel number for multiple
channels such as 2-1, 2-2, etc. A broadcaster may
transmit multiple programs on a single channel. Multiple
programs are distinguished by a unique sub-channel
number, separated by a dash (-).
SEL (SELECT) Use with numbered buttons for instant
channel selection. When you press a channel number,
for example 22, the receiver awaits another button press
for three seconds and then tunes to 22.
SURF Shows the list of your Surf channels. A Surf
channel list can contain up to 50 channels. You can
return to normal viewing by pressing the EXIT button or
by pressing the SURF button again.
INFO Press this button when you are watching
DirecTV® programming to display the Channel Banner
information and information about the current program.
Press again to remove the banner, or wait 10 seconds.
You can select the display mode, short or detailed, by
pressing the navigate up and down arrows. You can also
change the audio language, when available, by pressing
the left and right navigation buttons.
HELP Shows the on-screen “EZ Help” menu while you
are in normal viewing, or in an on-screen menu. To see
the help description of the selected option in the menu,
press and hold the HELP button.
NAVIGATION (UP, DOWN, LEFT, RIGHT arrows) Lets
you navigate the on-screen menus and adjust the
system settings and preferences, by moving to menu
option with the up, down, left, right buttons and
selecting the highlighted option with the button with a
circle on it (in the center of the navigation buttons). If
this button is pressing while in normal view, the information banner is displayed.
RATIO Changes the picture aspect ratio. When you
view a picture with a wide (16:9) aspect ratio in 480i or
480p format, this button changes the display options
from Letterbox, to Cropped, to Squeezed, and back to
Letterbox. When you view a picture with a normal (4:3)
aspect ratio in 720p or 1080i format, this button changes
the display options from Normal, to Wide, to Panorama,
to Zoom1, to Zoom2, and back to Normal. Detailed
descriptions of the TV aspect ration are given in TV
aspect ration section of the Preferences Menu.
Advanced Functions, cont.
SIGNAL Shows the signal strength of the current
channel. For digital over-the-air or satellite channels you
my be able to improve the signals strength by adjusting
the direction of your over-the-air antenna.
SD/HD Set the output resolution of the SD (480i format)
and pre-selected HD (480p, 720p, 1080i, native, hybrid-1,
and hybrid-2 formats), If you want to use VCR recording,
set to STD format. Note, pressing SD/HD, then the
LEFT navigation button, then SEL, will always cause
the receiver to output SD (480i) display format. Pressing
SD/HD, then the RIGHT navigation button, then SEL,
will always cause the receiver to operate in the preselected HD display format. I.E. the buttons will work no
matter what format had been selected.
FLASHBK (Flash Back) Returns to the last channel
viewed. Lets you move back and forth between the last
two channels viewed.
CC/DATE (Closed Caption) Lets you turn closed
caption on and off. The closed caption mode can be
selected in the Closed Caption section of the Preference
menu. You can also change the date by pressing the CC/
DATE button in the Advanced Program Guide. ™
Note, Close Caption will only appear when it is provided
by the broadcaster.
GUIDE button displays on-screen Satellite Channel
Guide.
CHANNEL+ and CHANNEL- buttons perform the
“Page+” and “Page-” function for on-screen Guide
Menus used by some Satellite systems.
MENU brings up the Satellite Menu screen - use with the
UP, DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen Menu
displays.
Advanced Functions, cont.
Advanced Functions, cont.
DVD Functions
VCR/DVD Punch Through Feature
SCAN+ and SCAN- buttons control the speed of Fast
Forward and Reverse Playback respectively.
This remote lets you Punch-through to the last VCR or
DVD device used. Normally other types of remotes only
punch-through (from another Mode) on the 6 VCR
buttons, to the device programmed under the VCR
Mode button. This is not much use if you are using a
DVD programmed under a Mode other than VCR. This
remote punches-through to the last VCR or DVD device
you used. For example, if you have 3 DVD/VCR devices
programmed into this remote, the last one you accessed
on the remote will be the one that has control of the 6
VCR/DVD buttons when in any other mode.
SKIP+ and SKIP- buttons respectively locate the
succeeding or preceding Chapters or Tracks on a disc.
SUBTITLE button turns the subtitles on or off.
REPEAT button performs DVD players “A-B Repeat” (or
RPT A.B) function for repeat play of current Chapter or
Track.
MENU brings up the DVD disc Menu screen - use with
the UP, DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection. Note
some DVD players require the PLAY button to be used.
EXIT button is used to Exit or Clear on-screen Menu
displays.
PLAY button is used to start Disc playback and for
Menu selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY to
resume.
INPUT (SIGNAL INPUT) activates the DVD Player’s
SETUP Menu.
TV/VCR/INPUT
When in TV mode the SIGNAL/INPUT button performs
the INPUT source switch function.
When in a mode that has been programmed for VCR the
SIGNAL/INPUT button performs the TV/VCR antenna
switch function.
When in a mode that has been programmed for Cable the
SIGNAL/INPUT button performs the A.B switch
function.
When in a mode that has been programmed for SAT the
SIGNAL/INPUT button performs the TV/SAT switch
function.
When in a mode that has been programmed for DVD the
SIGNAL/INPUT button performs the DVD Setup
function.
TV/VCR and TV/DVD Combo units
Note that for some TV/VCR and TV/DVD combo units
you might need to set up two different buttons to
control both parts of the combo unit. E.G., (referring to
the Direct Code Entry section on the following page)
you might need to set up a code under the TV button to
control the TV part of the combo unit AND a separate
code for the VCR or DVD under any other button you
choose.
10
11
Code Entry
Code Entry, cont.
Direct Code Entry
Programming with Code Search
1. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
2. Press and release the desired mode button ( TV, VCR ,
etc.). The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables (on
separate sheet). Note: after a valid code entry, the
red indicator turns off. For an invalid code, the red
indicator flashes.
4. With your device on, press CHANNEL UP. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
If your product does not respond after you have tried all
the codes for your brand, or if your brand is not listed,
try searching for your code by following these steps.
1. Manually turn on the device (TV , VCR, etc.) to be
controlled.
2. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
3. Press and quickly release the desired mode button
(TV , VCR, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to 300
times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing CHANNEL UP changes
direction to forward again.
5. Press and release MUTE to install the code.
CODE
SEARCH
1.
VCR
TV
SAT
POWER
DVD
AUX
2.
CHAN
Most users will store VCR codes under the VCR button,
DVD codes under DVD, etc. If (for example) you want to
store a VCR code under DVD, first follow the procedure
for Direct Code Entry (page 12) and press DVD in step 2
of Direct Code Entry, then enter ANY VCR code in step 3
of Direct Code Entry. Then follow the steps above for
Code Search (or Brand Search, next page).
PAGE
VOL
VOL
REPEAT
SUBTITLE
PAGE
FLASHBK
RATIO
3.
DATE
CHAN
SURF
SIGNAL
INPUT
HELP
SD/HD
Note: If the device does not have a CHANNEL UP
button, use PLAY (VCR only) or POWER instead. Code
Search starts from the currently stored three digit
number under that mode.
CODE
SEARCH
2.
Write your codes down here for easy reference later.
VCR
TV
3.
TV
CHAN
Code
PAGE
4.
REPEAT
SUBTITLE
PAGE
VCR
SAT
AUX
VOL
TV
Type stored
DVD
VOL
Type
SAT
POWER
FLASHBK
363
DVD
12
RATIO
DATE
CHAN
SURF
SIGNAL
INPUT
HELP
SD/HD
13
5.
Code Entry, cont.
Code Entry, cont.
VCR
TV
3.
SAT
DVD
VOL
VOL
RATIO
4.
SURF
SIGNAL
INPUT
14
ALL
N/A
N/A
ALL
ALL
N/A
ALL
ALL
N/A
N/A
PIONEER, TEAC, NAD
KENWOOD, YAMAHA,
DENON, ONKYO
N/A
N/A
N/A
N/A
SD/HD
N/A
N/A
DATE
HELP
N/A
N/A
6.
PAGE
CHAN
SYLVANIA, CURTISMATHES, FISHER,
EMERSON, OPTIMUS
5.
SUBTITLE
FLASHBK
GENERAL
INSTRUMENT,
ECHOSTAR, DISH,
HUGHES, PRIMESTAR
SYLVANIA, CURTISMATHES, FISHER,
EMERSON
CHAN
REPEAT
PHILIPS, MAGNAVOX
HITACHI, SANYO,
JVC, LG-GOLDSTAR,
SAMSUNG,
MITSUBISHI
AUX
PAGE
SYLVANIA, CURTISMATHES, FISHER,
EMERSON
HITACHI, JVC,
SAMSUNG
ZENITH, GEMINI
SONY, PANASONIC,
SHARP, TOSHIBA,
DAEWOO
HITACHI, SANYO,
JVC, LG-GOLDSTAR,
SAMSUNG,
MITSUBISHI
SONY, PANASONIC,
TECHNICS, SHARP,
TOSHIBA
SONY, PANASONIC,
TOSHIBA, SHARP
RCA, GE, PROSCAN,
PIONEER
PHILIPS, MAGNAVOX
SONY, PANASONIC,
SHARP, TOSHIBA,
DAEWOO, YAMAHA,
DENON
PHILIPS, MAGNAVOX,
MARANTZ
ZENITH, GEMINI
GENERAL
PHILIPS, MAGNAVOX
INSTRUMENT, TOCOM
JERROLD
ZENITH
PHILIPS, MAGNAVOX,
MARANTZ
RCA, GE, PROSCAN
ZENITH, APEX
SAT/DBS
RCA, GE, PROSCAN,
PIONEER
SCIENTIFIC ATLANTA
CABLE
TV
POWER
CODE
SEARCH
2.
DIGIT
Note: When all codes under a Brand have been searched
the red indicator flashes rapidly for 3 seconds.
RCA, GE, PROSCAN
Brand Search Method entry is now complete.
VCR/DVD/DVR
1. Turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the CODE SEARCH button until the
red indicator remains on, then release CODE
SEARCH button.
3. Press and quickly release the desired mode button
(TV, VCR, etc.). The red indicator blinks off once.
4. Press and release the numeric button (0-9)
corresponding to desired Manufacturer (see table on
next page). The red indicator blinks off once. Note,
pressing “0” performs a full library search same as
normal Code Search Method on previous page.
5. Press the CHANNEL UP button ((or POWER or PLAY
(VCR only)) repeatedly until the device to be
controlled changes channel. The red indicator blinks
off with each button press. If you accidentally
overshoot the code required, press the CHANNEL
DOWN button to backtrack through the library until
the device changes channel. Pressing CHANNEL UP
changes direction to forward again.
6. Press and release MUTE to install the code.
HITACHI, SANYO, JVC,
LG-GOLDSTAR,
SAMSUNG, MITSUBISHI
Look up your brand in the appropriate column (TV, VCR,
etc.). Look to see what digit (1, 2, 3, etc.) applies to your
brand, and enter it in step 4 of “Code Search by Brand”
on the previous page.
ZENITH
Lets you search for a code for a specific Brand within
the Code Library for a particular manufacturer.
RCA, GE, PROSCAN
Brand Search Table
CD/AUDIO
Code Search by Brand
15
Product Operation
Code Identification
Code Identification Feature
The Code Identification Feature allows you to identify
the three digit library code stored under your device key.
For example, if you want to find out what three digit
code is stored under your TV device key, follow the six
steps below:
1. Press and hold the CODE SEARCH button until the
red indicator stays on. Release the CODE SEARCH
button.
2. Press and release the desired mode button (TV,
VCR , etc.). The red indicator blinks, then stays lit.
3. Press and release the CODE SEARCH button. The
red indicator blinks off.
4. To find the first digit for the code stored under the
mode key pressed in step 2, press each numeric key
from 0-9 in turn. When the red indicator blinks off
the number you pressed is the first digit for the code
you are searching for.
5. To find the second digit, repeat step 4, this time
when the red indicator blinks off this is the second
digit.
6. Repeat step 4 again to find the third digit.
CODE
SEARCH
After the batteries are installed and you have
programmed the remote for the codes that operate your
products, you can use your remote to operate a TV, VCR,
Satellite Receiver, DVD Player, etc.
TV (Press TV First)
VCR
(Press VCR First)
Satellite Receiver
(Press SAT first)
POWER
1, 3.
VCR
TV
2.
SAT
DVD
DVD Player
(Press DVD first)
AUX
CHAN
PAGE
VOL
VOL
REPEAT
SUBTITLE
PAGE
RATIO
4, 5, 6.
DATE
CHAN
SURF
SIGNAL
INPUT
HELP
SD/HD
16
POWE
CO D
SE A RC
1. Press the TV, VCR, SAT, DVD,
etc. button (depending on
which product you want to
operate).
2. Aim the remote at the product.
3. Press POWER to turn on the
product.
4. Press other buttons to operate
the features of your product.
17
TV
DVD
SAT
VCR
AUX
CHA
PA G E
VOL
To Operate:
SU BTIT
VOL
FLASHBK
PA G E
RE PEA
FLA SHB
LE
D ATE
CHA
SU RF
RA TIO
H ELP
SIG NPUTAL
NI
SD H/ D
G U DI
INF O
OK
EX TI
ME N
SCA
SKIP
PLAY
SCA
PAUSE
STOP
REC
Wireless Receiver
Troubleshooting
The remote transmits wireless Radio Frequency (RF)
commands. The wireless receiver (included) receives
these commands and converts them to regular Infrared
(IR) commands. These IR commands are then emitted
from the IR Extender (also included) to control your A/V
components. This lets you control your A/V
components from ANY room in your home - you don’t
need to aim the remote at your component!
Remote does not operate your product.
•
•
•
•
Press the mode button of the product you want to
control.
Program the remote with a new code.
Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
Remote may not be compatible with your product.
Remote does not operate some features of your product.
Connect the plug-in power
supply (included) to this jack
and plug the power supply
into any 120V AC outlet.
•
•
Program remote with a new code.
Remote may not be able to operate all features of
your product or button names might be different
than your product.
Red Indicator blinks after you program a product code.
•
•
Remote did not accept the code.
Try to program the code again or try a different
code.
Antenna
Connect the IR Extender cord
(included) to this socket and
attach the IR emitters to the
front of the components you
want to control.
18
IR emitters
19
90 Day Warranty
This product is manufactured to ZENITH specifications
and is free from defects in material, workmanship and
assembly. This warranty extends only to the original
purchaser and is nontransferable. Should a defect occur
under normal operating conditions within 90 days from
the date of purchase, ZENITH will provide a comparable
replacement free of charge within the warranty period, to
the original purchaser. Defective product must be
returned, with the dated proof of purchase, to the place
of purchase for replacement. This warranty does not
extend to the product if it has been damaged or rendered
defective as a result of accident, misuse, abuse, tampering with or modification. THIS WARRANTY IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ZENITH BE
LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, TORT OR NEGLIGENCE. Some States do not
allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some
States do not allow exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives
you specific rights and you may also have other rights,
which vary from State to State.
Made in China-TC, Quality Assured in USA
Clifton, NJ 07014-1115
ZRF1
Back
Cover Art

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2003:07:07 13:31:17
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2003:07:07 13:31:17-07:00
Page Count                      : 11

EXIF Metadata provided by EXIF.tools