Autostart AS6601 Remote Transceiver User Manual
Autostart Remote Transceiver
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 808713 |
| Application ID | dWeXOH0jcjIYCv1tGlCaQQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 130.4kB (1629938 bits) |
| Date Submitted | 2007-06-27 00:00:00 |
| Date Available | 2007-06-28 00:00:00 |
| Creation Date | 2007-05-03 14:15:34 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2007-05-03 10:16:57 |
| Document Title | Microsoft Word - AS-6601_6850__ug_en_template__Bob_2_.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | ouem01 |
TWO-WAY 6-BUTTON LCD AUTOMATIC/MANUAL TRANSMISSION REMOTE STARTER WITH FULL ALARM SYSTEM AS-6850 User Guide WARNING It is the responsibility of the vehicle operator to ensure their vehicle is parked in a safe and responsible manner. 1. When leaving the vehicle, it is the user’s responsibility to ensure that the gearshift lever is in “Park” in order to avoid accidents upon remote starting. 2. It is the user's responsibility to ensure that the remote starter is disabled or put into Valet Mode before servicing. Battery Low Voltage Warning Once the battery is weak, the button pressed to transmit signals will cause the low voltage output of the battery. The LCD remote will display battery low voltage icon, and display “L-BAT” with 2 beeps to warn the user to change the battery. INDUSTRY CANADA USER NOTICE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. FCC USER NOTICE (U.S.A.): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. DOC: 1.00 (i) - May 3, 2007 - - MO - Manufactured in Canada by Autostart Table of Contents Ignition Re-lock......................................... 14 Secure Lock ............................................. 14 Remote Trunk Release ............................ 14 The Starter Kill and Anti-grind Feature..... 14 Safe Start Mode ....................................... 14 Introduction........................................... 2 Vehicle Presets ..................................... 2 Heater & Heated Seat................................ 2 Windshield Wipers & Radio & Headlights .. 2 Using the Transmitter........................... 3 How to access Safe Start Mode .................. 14 LCD Remote Functions.............................. 3 Installer-programmable Valet Modes ....... 14 Remote-Starting Your Vehicle ............. 7 Valet Mode Using the Valet Switch (if installed)....................................................... 14 “Home ValetTM” Mode .................................. 15 How to Access Home ValetTM Mode....... 15 Setting Your Vehicle Into Ready Mode...... 8 Remaining In Ready Mode ........................ 8 Remote starting.......................................... 8 Driving Off .................................................. 8 Turbo Mode .............................................. 15 Engine Run Time...................................... 16 Arming the Starter Kill.......................... 8 Alarm Function ..................................... 9 Remote Starter Features...................... 9 How to Access to Run Time Status (Indication purpose only) ............................................... 16 Temperature Request (If ACC-Temp-100 installed) ................................................... 16 Horn Chirp Timing .................................... 16 Pager Function......................................... 16 Multi-car Operation................................... 16 Idle Mode ................................................... 9 Valet Modes ............................................. 10 Ignition Valet ................................................ 10 Remote Combo Valet Mode ........................ 11 Remote Valet Start Mode ............................ 11 Remote Valet Alarm Mode .......................... 12 Panic Mode .............................................. 12 Quick LockoutTM ....................................... 12 Cold Weather Mode ................................. 12 How to access Cold Weather Mode ............ 13 Extended Run Time ................................. 13 Advanced Features: Installationprogrammable Options ...................... 13 Remote Door Locks ................................. 13 Priority Door Access................................. 13 Ignition-Controlled Door Locks................. 13 LCD Transmitter Operation and Confirmations (Second Car Control) 18 Basic Operations...................................... 18 Start/Stop While in Safe Start Mode ........ 18 Multi-Level Features (default state) .. 18 Accessing the Multi-Level Features and Other Transmitter Functions .................... 19 Troubleshooting Transmitting Range19 Intrusion Codes through Chirps ....... 20 Diagnostics – Parking Light Flash Table .................................................... 21 Introduction This is a state-of-the-art remote starter system. The system is packed with advanced features such as priority access to the driver’s door (commodity features) and the safe start children safety feature. With many advanced functions, this product will satisfy any of your expectations from high-end commodity and security systems, without neglecting any standard feature commonly offered by entry-level starters. Vehicle Presets Heater & Heated Seat When leaving the vehicle it is recommended to preset the accessory controls in preparation for the next remote start. Settings for the blower motor (fan), front and rear, as well as heated seats (if equipped) should not be left on HIGH. It is recommended to leave the settings on LOW or MEDIUM instead. Windshield Wipers & Radio & Headlights Certain vehicles require the radio and / or windshield wiper and / or headlight circuits to become energized while running under remote start. When leaving the vehicle you must ensure that the windshield wiper and headlight switches are OFF. Leaving the headlight switch ON on certain types of vehicles could cause them to remain ON even after remote starter shut down, resulting in a dead battery. P. 2 User Guide Using the Transmitter Your remote starter is equipped with a 6-button multi-channel remote control. It can operate two independent vehicles equipped with identical remote starters (see Multi-car operation section on page 16). LCD Remote Functions The transmitter offers several command-confirmation and timer features. This section explains some of the key functions available. The next section gives a summary of the button combinations used to access the functions. Note: If you wish to exit a function while still in the process of accessing it, simply stop and wait at least 5 seconds: the transmitter will return to its normal state. The functions of the transmitter are as follows: Transmitter Part Number: AS-6601 Auxiliary Button . Activates AUX 2, stops the Engine, sets the Temperature, activates Panic Mode, activates CWM (if programmed) Function Button: . Turns ON the backlight . Allows access to Multilevel functions TRUNK Button: Activates the Trunk LOCK Button: Locks all Doors and arms the Starter Kill UNLOCK Button: Unlocks all Doors and disarms the Starter Kill START/STOP Button: . Starts or Stops the engine (Normal functions) . Starts the engine ONLY (if the Auxiliary Button is programmed as STOP Button) F button Functionality: (By default) button 1x 2x 3x 4x Press less than 3 seconds LCD display Press less than 1 second Level 1 Level 2 Level 3 Enters programming mode L – 01 L – 02 L – 03 MENU Enable backlight Enable backlight Enable backlight Enable backlight Note: The order of LEVELS and MENU can be re-arranged in the menu option FBPRO. User Guide P. 3 Backlight: Press and hold the button (for more than 3 seconds and less than 5 seconds), to turn the Backlight ON for 3 seconds. If the backlight will stay ON until the button is pressed down for more than 5 seconds, the button is released. A quick way to access the backlight is to button quickly (for less than 1 second); the backlight will turn on until the MENU press the operation ends. Backlight Button Press for < 1 second Backlight ON until MENU operation ends. Press for > 3 seconds and < 5 seconds Backlight ON for 3 seconds. Press for > 5 seconds Backlight will stay ON until button is released. Selecting and adjusting Menu options: button to enter the menu. When in MENU, press Press but button to move up in the menu or b button to move down in the menu. Press button to select the option you would like to adjust. Press button to increase the value or to activate or deactivate a function or toggle through the selection. button to decrease the value or to activate or deactivate a function or toggle through Press the selection. button to move to the next sub-option or go back to the main menu. Press Order Menu Option LCD display Function Parking Menu Parking hour PARK P 0:00 0 is flashing P 0:30 30 is flashing P -- ON + Or P – OFF FBPRO Adjusts parking hour (value from 0 to 12) Adjusts parking minute (value from 0 to 59) Enables or disables parking countdown. There is a beep 5 min. before the Parking countdown reaches 0. F Button Programming Parking minute Toggle Parking countdown P. 4 F Button Function Menu FB Programming Illumination Menu Toggle Illumination Mode Keypad Lock Time Menu Keypad lock time 123M 231M 213M 312M M123 ILLUM ON Or OFF ON – basic operation with backlight illumination OFF – basic operation without backlight illumination KELOC 05 10 20 When the SECURE is ON, Keypad will be locked automatically 5 sec./10 sec./20 sec. after the MENU operation ends. User Guide 5 Side Button Program Menu Side Button Programming Language Menu Language Temperature Menu Temperature Clock Menu Clock hour Clock minute Confirmation Mode Menu Confirmation Mode Toggle BZVIB Toggle BLITE 10 Backlight Color Menu Backlight 11 SECURE Menu Toggle lock remote 12 Time Start Menu Time start hour Time start minute Toggle time start 13 VALET Menu Valet Mode options Toggle Valet Mode User Guide SBPRO TEMP STOP PANIC CWM AUX LANGU ENG Or FRAN TEMP CTEMP Or FTEMP CLOCK 12:00 12 is flashing 12:00 00 is flashing CONFM BZVIB Or BLITE BUZ Or VIB + vib ICON ON Or OFF COLOR There are 8 different colors. C1-C8 SECUR ON Or OFF TSTAR T 12:00 12 is flashing T 12:00 00 is flashing T – ON + Or T – OFF VALET VLTAM VLTST CMVLT ON Or OFF Aux Button Programming English is default. Deg. Celsius or Fahrenheit Deg. Celsius is default. Adjusts clock hour (value from 0 to 12) Adjusts clock minute (value from 0 to 59) Buzzer and Vibration option Red Backlight option for Alarm Buzzer Vibration Red backlight flashing when alarm No red backlight flashing when alarm Blue light is default C1-C8 color. Locks the transmitter’s keypad. ON – lock the transmitter’s keypad. OFF – unlock the transmitter’s keypad. Adjusts time start hour (value from 0 to 12) Adjusts time start minute (value from 0 to 59) Enables or disables Valet Alarm Mode Valet Start Mode Combo Valet Mode P. 5 14 CWM Menu Toggle CWM Mode 15 Alarm Clock Menu Alarm hour Alarm minute Toggle alarm CWM ON Or OFF ALARM A 12:00 12 is flashing A 12:00 00 is flashing A – ON + Or A – OFF Cold Weather Mode Adjusts alarm hour (value from 0 to 12) Adjusts alarm minute (value from 0 to 59) Enables or disables alarm Parking Countdown This version of the countdown feature is particularly useful for keeping track of parking meter time: the user may quickly set up the countdown using the Parking Menu. The transmitter will beep once, 5 min. before the Parking countdown reaches 0. Alarm Clock The LCD remote control has a built-in alarm clock, which can be set up using the Alarm Clock Menu. Once the programmed time is reached, the remote will beep 6 times every minute until a button is pressed. CWM menu: When this feature is enabled, press press (enter L-01)→ button to enter or exit Cold Weather Mode. Valet menu: When this feature is enabled, press disabled, press for 3 sec. to enter or exit Cold Weather Mode. If disabled, for 3 sec. to enter Valet Mode. When this feature is buttons simultaneously. Time Start menu: This feature is used to remote start the car at a pre-programmed time. Once the pre-programmed time is reached, the remote will send a start command to the car module. Secure Remote feature: This feature is used to lock the keypad of the transmitter to avoid accidental button press. When the remote is locked and a button (except F button) is pressed, the LCD will display “PRESF” for 1 second and go back to the clock. The transmitter keypad can also be locked as follows: • • Press to go to Menu Within 3 seconds, press Press for about 1 sec to unlock the transmitter keypad. At the same time, the LCD screen will display “PRESb” for 1 sec. and then go back to the clock. Clock Menu: The Clock menu is used to set the current time on your remote control. F Button Function Menu: The order of LEVELS and MENU can be re-arranged using the F Button Function Menu. P. 6 User Guide Button Operation: Button LCD Lock button + LOCK Engine stop AUX Button Unlock+Start button Lock+Unlock button Trunk+Lock button (2nd car operation) Trunk+Unlock button (2nd car operation) Trunk+Start button (2nd car operation) L --01 → Lock button L --01 → Unlock button L --01 → Trunk button L --01 → Start button (pressed more than 3s) L --02 → Lock button (2nd car unlock) L --02 → Unlock button (2nd car unlock) L --02 → Trunk button(2nd car trunk) L --02 → Start button(2nd car start) L --03 → Lock button (Channel 1) L --03 → Unlock button (Channel 2) L --03 → trunk button (Channel 3) L --03 → Start button (Channel 4) 1 beep 2 beeps Unlock button Trunk button Start button Engine running Sounder + UNLOCK TRUNK text for 1 sec. START text for 1 sec., + backlight user selected for 2 sec. Run time + icon + Blue backlight for 3 sec. Red backlight on for 3 sec. TEMP - displays temperature + backlight user selected for 3 sec. STOP - transmits Engine stop code PANIC - transmits PANIC Mode code CWM - transmits CWM code AUX - transmits AUX code Valet icon if pressed more than 3 sec. Same as AUX button 1 beep 1 beep 3 beeps 2 beeps 1 beep 2 beeps 1 beep 1 beep + LOCK 2 beeps + UNLOCK START text for 1 sec. 1 beep 1 beep 1 beep Temperature + backlight user selected for 3 sec. CWM or MTF text for 1 sec. 1 beep 1 beep LOCK + 2 beeps UNLOCK + TRUNK text for 1 sec. 1 beep START text for 1 sec. 1 beep 1 beep 1 beep 1 beep 1 beep Remote-Starting Your Vehicle If your vehicle has an automatic transmission, simply press the START/STOP button to remote start or stop your vehicle. Skip the next steps on to “Remote-starting”. Warning: If you vehicle has an automatic transmission and the parking lights flash 15 times after pressing the START/STOP button, the parking brake is connected to ground. It is imperative that you see your installer and have him disconnect the wire. User Guide P. 7 Setting Your Vehicle Into Ready Mode If your vehicle has a manual transmission you must read the following instructions. In order to start the vehicle by remote, the unit must first be set to Ready Mode. If the unit is not set to Ready Mode, it cannot remote-start the vehicle. Once the system is set to Ready Mode, the vehicle can be remote-started and stopped at wish. To set the system to Ready Mode: 1. Ensure that all the doors are closed and that the shifter is in the NEUTRAL position. 2. With the engine already running, apply the parking brake and release the brake pedal. Make sure to release the brake pedal. 3. Within 20 sec. press LOCK, UNLOCK or START/STOP on the transmitter. The parking lights will flash 3 times quickly and remain lit. 4. Remove the key: the engine will go on running. 5. Exit the vehicle and close the door. 6. Press and hold either: a. LOCK to lock the doors and shut down the engine; b. UNLOCK to unlock the doors and shut down the engine; c. START/STOP to shut down the engine without affecting the doors. 7. The icon will appear on your screen. Remaining In Ready Mode Once the vehicle is in Ready Mode you can start and stop the vehicle at wish. However, should any of the following occur, the vehicle will exit Ready Mode – thus eliminating the remote start option until Ready Mode is restored: • Door opened; • Hood opened; • Brake pedal pressed; • Parking brake disengaged; • Ignition key turned to the IGNITION ON (RUN) position. Note: The unit will notify the user that it has exited Ready Mode by giving 3 slow flashes (parking lights). Remote starting Press the button for approximately 1 second. The LCD will display “START” with the backlight ON for 1 second. The parking lights will come ON to inform you that the remote starter has received your signal. Approximately 5 seconds later, the engine will start. The parking lights will remain ON during the pre-programmed run time of the engine. If the vehicle does not start at the first attempt, the system will shut down. If your vehicle is equipped with an automatic transmission, there will be 3 start attempts before the system gives up. Driving Off With the vehicle running under remote control, press the button to disarm and unlock the doors. Enter the vehicle and do the following: Turn the ignition key to the IGNITION ON (RUN) position. (Do not turn the key to the CRANK position while the engine is running. This would cause the starter motor to re-engage.) Press the brake pedal to disengage the remote starter unit. You are now ready to drive off. Arming the Starter Kill The starter kill (if installed) can be configured by the installer so as to arm automatically (passive mode) or not to arm automatically (active mode). P. 8 User Guide • To disarm the starter kill, press the button on the transmitter. The parking lights will flash twice. If remote door locks are installed, this will also unlock the doors. • To arm the Starter Kill, press the button on the transmitter. The parking lights will flash once. If remote door locks are installed, this will also lock the doors. • In passive mode, the starter kill will automatically arm if the ignition key is not inserted into the ignition switch within 30 seconds after unlocking (the key sense feature must be installed). Alarm Function When an intrusion from door, hood, trunk, shock or ignition is detected, the remote will send beeps or vibrate for about 60 seconds. At the same time, the LCD remote will display “ALARM” and “DOOR/HOOD/TRUNK/SHOCK/real time” (depends on the type of alarm) alternately. The icon of door, hood, trunk or shock will be flashing and the red backlight will be flashing (when the BLITE is set ON). Alarm Type LCD Text Icon Sound or Vibration Car front view outline + 60 seconds door open and closed DOOR ALARM + DOOR HOOD ALARM + HOOD Car side view outline + hood up and down 60 seconds TRUNK ALARM + TRUNK Car side view outline + trunk up and down 60 seconds SHOCK ALARM + SHOCK Car front view outline + shock sensor flashing 60 seconds IGNITION ALARM + real time NONE 60 seconds If the passive arming/single-stage disarm was selected at the time of the installation, the user will be able to stop the siren AND disarm the system by pressing the LOCK or UNLOCK button once. If the passive arming/dual-stage disarm option was selected instead, the user will only stop the siren by pressing the LOCK or UNLOCK button once. In order to stop the siren AND disarm the system, they will have to press the LOCK or UNLOCK button twice. Remote Starter Features Idle Mode Convenience feature: Idle Mode allows you to keep the engine running and the doors locked while you stop, for example, at a convenience store or for a short delivery. This feature allows you to let the remote starter take over control of the vehicle (i.e. no Key in the Ignition Switch) while the engine is running. For example, if you stop for a delivery or at a convenience store, lock your vehicle and leave it running for the length of a run cycle while you are away. To leave the vehicle in Idle Mode if your vehicle has an automatic transmission: 1. 2. 3. With the engine running, press the or button (to unlock the doors) or the button on the remote control until the parking lights come on. Remove the key and exit the vehicle. The engine will go on running. Lock the doors if needed. User Guide P. 9 The engine will go on running until the user re-enters the vehicle or until the expiration of the Engine Run Time. If your vehicle has a manual transmission, Idle Mode can be activated through the same routine as that used for Ready Mode; at the last step, the button is pressed instead of the other buttons: 1. Ensure that all the Doors are closed and that the Shifter is in the Neutral position. 2. With the Engine already running, apply the Parking Brake and release the Brake Pedal. Make sure to release the brake pedal. 3. Within 20 sec. push or on the Transmitter. The parking lights will flash 3 times quickly and remain lit. 4. Remove the key: the Engine will go on running. 5. Exit the vehicle and close the Doors. 6. Press the button until the system is armed (the doors will be locked if remote door lock is installed). The remote will beep 3 times to confirm the engine running status. If the pre-programmed run time expires or if the user shuts down the engine by remote control, the vehicle will get in Ready Mode. Caution!!! Do not leave children or pets unattended in a vehicle that is in Idle Mode. Valet Modes There are 3 sorts of Valet Modes: Combo Valet, Valet Start and Valet Alarm. When your vehicle is in Combo Valet Mode, both the remote starter functions and the alarm functions are disabled. When your vehicle is in Valet Start Mode, the remote starter functions are disabled. When your vehicle is in Valet Alarm Mode, the alarm functions are disabled. Ignition Valet This feature will allow you to remotely put your system into Combo Valet Mode by using the ignition key instead of the valet button as above. Ignition valet can be used without a valet button installed. To put the system into COMBO Valet Mode: Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into the IGNITION ON / RUN and OFF positions. The parking lights will flash three times to indicate that the vehicle is now in Valet Mode. — The icon will appear on your LCD remote. To put the system out of COMBO Valet Mode: Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into the IGNITION ON / RUN and OFF positions. The parking lights will flash twice to indicate that the vehicle is now out of Valet Mode. — The icon will disappear from your LCD remote. Note: With the Ignition valet activated, the remote starter and the alarm functions will be disabled. Getting into Valet Mode using combined buttons • Hold the and buttons simultaneously for 3 second. • The parking lights will flash 3 times. The LED will remain on solid. — The icon will appear on your LCD remote. Getting out of Valet Mode using combined buttons • Hold the and buttons simultaneously for 3 second. • The parking lights will flash 2 times. The LED will turn off. — The icon will disappear from your LCD remote. P. 10 User Guide Remote Combo Valet Mode This feature will allow you to remotely put your system into Combo Valet Mode by using the transmitter. Getting into Combo Valet Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press go to the next stage MENU, Press the VALET) Mode. • Press go to the next stage MENU, Press the • Press and hold for 5 seconds. • The parking lights will flash 3 times. — The icon will appear on your LCD remote. or or to choose the CMVLT (COMBO to choose the ON. Getting out of Combo Valet Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press to go to the next stage MENU, Press the VALET) Mode. • Press go to the next stage MENU, Press the • Press and hold for 5 seconds. • The parking lights will flash 2 times. — The icon will disappear on your LCD remote. or or to choose the CMVLT (COMBO to choose the OFF. Note: With the remote valet activated, the remote starter and the alarm function will be disabled. Remote Valet Start Mode This feature will allow you to remotely put your system into Valet Start Mode by using the transmitter. Getting into Valet Start Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press go to the next stage MENU, Press the START) Mode. • Press go to the next stage MENU, Press the • Press and hold for 3 seconds. • The parking lights will flash 3 times. • The icon will appear on your LCD remote. or or to choose the VLTST (VALET to choose the ON. Getting out of Valet Start Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press go to the next stage MENU, Press the START) Mode. • Press go to the next stage MENU, Press the • Press and hold for 3 seconds. • The parking lights will flash 2 times. • The icon will disappear on your LCD remote. User Guide or or to choose the VLTST (VALET to choose the OFF. P. 11 Remote Valet Alarm Mode This feature will allow you to remotely put your system into Valet Alarm Mode by using the transmitter. Getting into Valet Alarm Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press go to the next stage MENU, Press the ALARM) Mode. • Press go to the next stage MENU, Press the • Press and hold for 3 seconds. • The parking lights will flash 3 times. • The icon will appear on your LCD remote. or or to choose the VLTAM (VALET to choose the ON. Getting out of Valet Alarm Mode • Press the go to the MENU. • Press the or go to the VALET MENU. • Press go to the next stage MENU, Press the START) Mode. • Press go to the next stage MENU, Press the • Press and hold for 3 seconds. • The parking lights will flash 2 times. • The icon will disappear on your LCD remote. or or to choose the VLTAM (VALET to choose the OFF. Panic Mode In an emergency situation, you can activate Panic Mode by pressing and holding the LOCK or UNLOCK button for 3 seconds. If the vehicle is under a remote start, the engine will shutdown (this will automatically before setting off the horn/siren. You can stop the horn/siren by pressing (this will unlock your doors). lock your doors) or by pressing or buttons but it will If the car is not running, you can stop the horn/siren by pressing the not lock or unlock the doors. Furthermore, the Panic Mode can be stopped by activating one of the following three (3) features: a) Remote valet (pressing and for 3 seconds) b) Ignition valet (turning the key inside the ignition switch from off to on 5 times in a row) c) Turn the key in ON position, then press the valet switch (if included). Panic Mode will automatically shut down after 25 sec. Quick LockoutTM (Also called Secure Panic.) For fast protection in emergency situations, the system will LOCK all doors when you press the brake pedal while you hear the sound signal. (Quick Lockout is only available when Panic Mode has been set off.) Cold Weather Mode When Cold Weather Mode is active, the engine starts every 2 hours and runs for 3 minutes (or for 8 or 20 minutes with diesel engines). Cold Weather Mode automatically ends after 24 hours. To enter Cold Weather Mode: Press and release the button and you will hear a beep, L-01 will appear on the display, then press and hold the button for 3 seconds until the parking lights flash three times. The remote control will beep once and the icon will appear on the display. To exit Cold Weather Mode, do any one of the following actions: • Open the hood. • Start the engine by remote. P. 12 User Guide • Turn the ignition key to the IGNITION ON (RUN) position. • Press and release the button and you will hear a beep. L-01 will appear on the display. Then press the button for 3 seconds (the parking lights will flash once). When the system exits Cold Weather Mode, the remote control will beep once and the icon will disappear. To verify whether the system is in Cold Weather Mode: Press the brake pedal: If the vehicle is in Cold Weather Mode, the parking lights will stay on while the pedal is pressed. How to access Cold Weather Mode Function Button pressed To enter Cold Weather Mode To exit Cold Weather Mode Icon Beep Sound None Instructions /description Press Beep and hold seconds. for 3 Extended Run Time While the vehicle is running under a remote start, pressing and holding the button for more than 3 seconds will reset the run time counter to zero and restart the run time cycle from the beginning. There will be one beep a pause three more beeps; the parking lights will flash three times and the horn (if configured) will honk once. The extended run time procedure can only be carried out once per remote start. To stop the vehicle, at any moment, simply press the button. Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle has been running for 2 minutes already, pressing the button will reset the counter to zero and allow the engine to run for another cycle (in this case, 3 minutes). Advanced Features: Installation-programmable Options The remote starter was designed with flexibility and OEM integration in mind. With its programmable options, this unit can single-handedly control nearly any electrical system in your vehicle. Caution: The programming of your system should be left to a professional. Changing any one of the settings may affect the operation of your remote starter. Remote Door Locks If your remote starter was installed with the remote door locks option, you will have the convenience of remote keyless entry. See section Arming the Starter Kill, on page 8, for further instructions on remote door locking and unlocking. Priority Door Access If the priority door locks option is installed on your vehicle, this safety feature allows you to unlock button on the transmitter; upon a second solely the driver’s door with a single press of the button, all the other doors will unlock. press of the Ignition-Controlled Door Locks This is an added security feature. If your remote starter was installed with the ignition-controlled door locks option, the doors will automatically be locked as soon as the ignition key is turned to the IGNITION ON (RUN) position while the brakes are pressed. When the key is turned to the OFF position, the doors will automatically be unlocked. User Guide P. 13 Ignition Re-lock On remote starters of this series, when ignition-controlled door locks are enabled and the ignition key is in the IGNITION ON (RUN) position, should any door be unlocked and opened, all doors will be relocked the next time the brake pedal is pressed. Secure Lock Before it can remote-start your vehicle, the remote starter must first disarm the factory security system. The secure lock feature may be required on certain vehicle models with factory security systems that automatically unlock the doors when the security system is disarmed. To keep your vehicle protected when the factory security system is disarmed for a remote start, secure lock will relock your doors as soon as the vehicle has started. Once the engine run cycle ends, secure lock will rearm your factory security system. Remote Trunk Release If your system was installed with the Remote Trunk Release option, you can open your trunk by pressing the button for 3 seconds on the remote transmitter or by pressing the button twice within 3 seconds. The Starter Kill and Anti-grind Feature With this added security feature, the system will prevent your vehicle from starting with the ignition key when the starter kill is armed. If your remote starter was installed with the starter kill option, one will not be able to start your vehicle with the key unless the system has been unlocked and disarmed first, or put into Valet Mode. Note: If the starter kill is installed, your vehicle will benefit from a protection against starter motor damage that could occur after remote-starting the engine should the user, by force of habit, turn the ignition key to the CRANK position. Safe Start Mode If this feature is enabled, the user must press the button 2 times within 3 seconds to remotestart the vehicle. This will eliminate accidental remote starts, e.g. when children are playing with the transmitter. If Swap Start Mode is selected, to remote-start your vehicle, press the button. The AUX 2 output can be activated by pressing the button and then the button. How to access Safe Start Mode Function Start on Safe Start Mode Stop on Safe Start Mode By pressing x2 Icon None Sound Melody Instructions / description twice within 3 Press seconds. Press for 1 secmelody-then press 1 sec. Melody Installer-programmable Valet Modes Valet Mode Using the Valet Switch (if installed) When your vehicle is in Valet Mode, the remote starter functions are disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remotestarted accidentally. To put the system into COMBO Valet Mode: 1. Turn the ignition key to the IGNITION ON (RUN) position. 2. Within 3 sec., press the valet button. P. 14 User Guide 3. The parking lights will flash three times to indicate that the vehicle is now in Valet Mode. Turn the ignition key to OFF position. To take the system out of COMBO Valet Mode: 1. Turn the ignition key to the IGNITION ON (RUN) position. 2. Within 3 sec., press and release the valet button (the L.E.D. will come OFF). 3. The parking lights will flash twice to indicate that the vehicle is now out of Valet Mode. Note: Once Valet Mode using Valet Switch is activated, the remote starter and the alarm function will be disabled. “Home ValetTM” Mode If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if the vehicle is parked indoors there is no danger of it starting accidentally by remote control. Note: Once the Home Valet Mode is activated, the vehicle will not start by remote but the OEM alarm functions will still be enabled. To take the system i n t o Home Valet Mode: • Press the or button. • Within 3 seconds, press the and buttons simultaneously until the parking lights go out. • The icon will appear on your LCD remote. To take the system o u t o f Home Valet Mode: • Turn the ignition key to the IGNITION ON (RUN) position. The system will warn you if someone attempts to start your vehicle while it stands in Home Valet Mode. The parking lights will: 1- Turn ON then OFF; then 2- Flash twice, pause; then 3- Flash twice again. How to Access Home ValetTM Mode Function By pressing Icon Sound Instructions / description Press Step 1 : or To enter Home Valet™ Step 2 : simultaneously within 5 sec. Mode To exit Home Valet ™ Mode None None or . Within 5 seconds, press 1 beep + . The transmitter will display and there will be 1 beep. None Insert key in ignition switch and turn to the on position. The icon will disappear. Turbo Mode If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it is shut down by remote control), then shut down the engine and set the Remote Car Starter to Ready Mode. If your vehicle has an automatic transmission, proceed as follows to set the system in Turbo Mode: With the engine already running, press the button on the transmitter until the parking lights come ON. 2. Remove the ignition key from the ignition switch. The engine will go on running. 3. Exit the vehicle and close the door. 4. Press the button to lock the doors; the engine will shut down after 60 seconds of Turbo Mode. User Guide P. 15 If your vehicle has a manual transmission, follow all steps of the Ready Mode routine, to activate Turbo Mode: 1. Ensure that all the doors are closed and that the shifter is in the neutral position. 2. With the engine already running, apply the parking brake and release the brake pedal. Make sure to release the brake pedal. 3. Within 20 sec. press or on the transmitter. The parking lights will flash 3 times quickly and remain lit. 4. Remove the key: the engine will go on running. 5. Exit the vehicle and close the door. 6. Press and hold either: a. to lock the doors and shut down the engine after 60 sec.; b. to unlock the doors and shut down the engine after 60 sec.; c. d. to shut down the engine immediately, without affecting the doors (this will bypass Turbo Mode). TO SET THE VEHICLE INTO IDLE MODE Engine Run Time If you have a gas engine, your remote starter can be programmed to run the engine for 3, 15, or 25 minutes (15 minutes by default). If you have a diesel engine, the remote starter can be programmed to run the engine for 8, 20, or 30 minutes (20 minutes default). How to Access to Run Time Status (Indication purpose only) Function By pressing Icon Gasoline Diesel Engine runtime 3 minutes 8 minutes 15 minutes 20 minutes 25 minutes 30 minutes Temperature Request (If ACC-Temp-101 installed) The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp100) is installed: o Press the button for 1 second and release; you will hear a beep. L-01 will appear on the screen. o Immediately press the button and hold it until the temperature is displayed on the LCD screen. Note: to change the temperature from Celsius to Fahrenheit, the user needs to refer to the menu. Horn Chirp Timing The pulse duration can be configured by your installer (from 5 ms. to 200 ms.). Pager Function This function will help you find the remote. By pressing the valet button for 3 seconds, you will trigger the pager function. The remote will beep to inform you of its location. User can press the LOCK or UNLOCK button to stop the beeping of the remote once it is found. Multi-car Operation This option allows the owner of two vehicles, both equipped with the same remote starter model, to control both systems independently with a single remote control. To control the second vehicle: P. 16 User Guide Note: Your remote control must be configured for second car operation by the installer. Press simultaneously: ................................................. LOCK Press simultaneously: ................................................. UNLOCK Press simultaneously: ...................................................................START Press simultaneously:..................................................... STOP Press ¾ ¾ : ........................................................... TRUNK Press ¾ ¾ :......................................................... LOCK Press ¾ ¾ :......................................................... UNLOCK Press ¾ ¾ : ........................................................... START Press ¾ ¾ : ........................................................... STOP Press ¾ ¾ :........................................................... TRUNK or User Guide P. 17 LCD Transmitter Operation and Confirmations (Second Car Control) Basic Operations Function Button press Icon Sound Lock 1 beep Unlock 2 beeps Start Stop None Trunk 3 beeps run time + ¾ 2 beeps 1 Beep ¾ Start/Stop While in Safe Start Mode Function Button press Start on Safe Start Mode Stop on Safe Start Mode Icon run time + x2 None Sound Description 3 beeps Press simultaneously twice within 3 seconds. Press for 1 second - a beep will be heard - then press 1 second and a melody will be heard again. 2 beeps Multi-Level Features (default state) The multi-level features allow you to access different features of your vehicle or of a second car by pressing the shift button once, twice or three times. By default, the multi-level features are programmed as follows: Basic Features (press the button 1X) ¾ : ............................................................ aux 2 ¾ ............................................................. cold weather Multi-Car Operation (press the button 2X) ¾ ¾ :........................... 2nd car lock ¾ ¾ : ........................... 2nd car unlock ¾ ¾ : ............................ 2nd car start/stop ¾ ¾ :........................... 2nd car trunk Customized Features (press the button 3X) (May not be compatible with some vehicles) Your installer can add customized features such as turning on the radio, opening sliding doors, etc. P. 18 ¾ ¾ ¾ customized feature 1 ¾ ¾ ¾ customized feature 2 ¾ ¾ ¾ customized feature 3 ¾ ¾ ¾ customized feature 4 User Guide Accessing the Multi-Level Features and Other Transmitter Functions x To access a Level 1 feature, press and release the button and you will hear a “beep”; L-01 will be displayed. This display means that you are now in Level 1. Simply press the corresponding button to access the desired feature. x To access a Level 2 feature, press and release the button and you will hear a “beep’’; L-02 will be displayed. This display means that you are now in Level 2. Simply press the corresponding button to access the desired feature. button and you will hear a “beep”; L-03 x To access a Level 3 feature, press and release the will be displayed. This display means that you are now in Level 3. Simply press the corresponding button to access the desired feature. Your installer can customize the system as to personalize these multi-level features in an order that best suits your needs. Your options are: Option 1: Level 1 (requires pressing the button 1X) Æ Multi car operation Level 2 (requires pressing the button 2X) Æ Basic features Level 3 (requires pressing the button 3X) Level 1 (requires pressing the button 1X) Æ Basic features Level 2 (requires pressing the button 2X) Æ Multi car operation Level 3 (requires pressing the button 3X) Æ Customized features Level 1 (requires pressing the button 1X) Æ Customized features Multi car operation Æ Customized features Option 2 (on by default): Option 3: Level 2 (requires pressing the button 2X) Æ Level 3 (requires pressing the button 3X) Æ Basic features Option 4: Level 1 (requires pressing the button 1X) Æ Basic features Level 2 (requires pressing the button 2X) Æ Customized features Level 3 (requires pressing the button 3X) Æ Multi car operation Example: If the multi-level features were set to option 3, the setup would be as follows: For “Basic features”: x To access the aux. 2 feature, the user needs to press on the by the button. x To access Cold Weather Mode, the user needs to press on the followed by the button three (3) times followed button three (3) times button. Troubleshooting Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: • The condition of the battery in the transmitter. • The operating environment (for example: downtown radio-frequency noise, airports, cellular phone towers…) • Metal: any type of metal will affect operating range. This includes the metal in the car. • The shape of the vehicle can affect range as well; vans in general have an especially poor range. User Guide P. 19 • The shape of the roof and A-pillars brings about considerable radio-frequency deflection (in this case the signal from the remote control). As a result, the direction in which the vehicle is facing in relation to the remote control can affect the range. Straight on – standing in front of the vehicle – generally gives you the greatest range; the second best performance is from the back. Using the remote control from either side of the vehicle will usually give the lowest range. • The range will be significantly lower in a crowded parking lot than in open space. • Always hold the transmitter high, approximately at shoulder height. Holding the transmitter against your chin will also increase your range: your head acts as an antenna. • The operating range will be somewhat lower on vehicles equipped with an aftermarket or factory alarm. Intrusion Codes through Chirps If there has been an intrusion in the vehicle while it was locked and armed, the OEM alarm will provide in intrusion code matching the type of intrusion that took place. Disarm the alarm (UNLOCK) to identify the intrusion. Diagnostics – Chirps Table Chirps Description P. 20 • • • • • • • Power OFF, power ON Door Shock Hood Panic Ignition Trunk User Guide Diagnostics – Parking Light Flash Table Flashes Description • Doors locked, Starter Kill armed. • Run time has expired. • TRUNK button pressed. • Start signal received by the module. • Cold Weather Mode cancelled. • Remote start attempt cancelled by remote. • Doors unlocked, Starter Kill disarmed. • Exiting Ignition Valet. • Exiting Remote Valet. • Power-up reset. • Board set from manual to automatic; power ON. • Power ON to OFF (automatic transmission). 2 quick flashes continuously 3 slow flashes… • Starter Kill ON / Alarm OFF. • Entering Cold Weather Mode. • Entering Ignition Valet. • Extended run time. • Entering Remote Valet. • Entering or exiting Ready Mode. • Disabling LED. …after a failed start attempt. The module did not detect a tach signal. • +12 V detected on the brake input wire either while cranking or during run time. • Entering multi-speed tach programming. • Board set from automatic to manual; power ON. • Power ON to OFF (manual transmission). 5 Slow • Start attempt failed because no tach signal has been programmed. 5 Fast • Tach signal programmed. • A remote start was attempted while a tach-before-crank signal was detected before cranking. • Unit reset: occurs when the unit is reset to the factory defaults. • A ground (-) signal was detected on the hood pin input wire. 10 When pressing START/STOP 15 quick flashes… 1 pause 1pause 5 flashes 1 – pause – 2 ON SOLID for 3 seconds…. ON continuously ON continuously ON 2 seconds • The parking brake is connected to ground (automatic transmission). • Transmitter has been programmed. [During the transmitter programming procedure.] • There was a remote start attempt while the vehicle was in Valet Mode. • Failed start: vehicle’s low battery voltage. …followed by 1 flash. Exiting Cold Weather Mode. …followed by 3 flashes. Entering Cold Weather Mode. • Idle Mode: Idle Mode is engaged. • Run time: The vehicle has been remote started and is in run time. While the brake pedal • Confirms that Cold Weather Mode is engaged. is pressed. • The hood has been opened and a ground (-) signal has been detected on the hood pin input wire. ON 4 seconds • Locking or unlocking a door (with Door pulses configured to 4 sec.). ON 20 seconds • The hood pin has been flashed and you are now in the programming centre. Constant flashes for 25 sec. User Guide • Panic Mode is triggered. P. 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2007:05:03 14:15:34Z Modify Date : 2007:05:03 10:16:57-04:00 Page Count : 21 Creation Date : 2007:05:03 14:15:34Z Mod Date : 2007:05:03 10:16:57-04:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : ouem01 Metadata Date : 2007:05:03 10:16:57-04:00 Creator : ouem01 Title : Microsoft Word - AS-6601_6850__ug_en_template__Bob_2_.docEXIF Metadata provided by EXIF.tools