Avantech Mobile CT9A9J GSM/GPRS Cellular Mobile Phone with Bluetooth User Manual SAR Information2 2
Avantech Mobile GSM/GPRS Cellular Mobile Phone with Bluetooth SAR Information2 2
Contents
- 1. User Manual
- 2. RF Exposure Statement
RF Exposure Statement
SAR Information - EU (RTTE) SAR Information - EU (RTTE) THIS MODEL PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by the Council of the European Union. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit recommended by the Council of the European Union is 2.0 W/kg. Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. Before a phone model is available for sale to the public, compliance with the European RTTE directive must be shown. This directive includes as one essential requirement the protection of the health and the safety for the user and any other person. The highest SAR value for this Xenium 9@9j / CT 9A9j model phone when tested for compliance against the standard was 0.868 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the EU requirements for RF exposure. SAR Information - International (ICNIRP) SAR Information - International (ICNIRP) THIS MOBILE PHONE MEETS INTERNATIONAL REQUIREMENTS FOR EXPOSURE TO RADIO WAVES Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 W/kg. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the phone. The highest SAR value for this Philips 9@9j / CT 9A9j model phone when tested for use at the ear is 0.362 W/ kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the relevant international guidelines for RF exposure. SAR Information - FCC "This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation." For body-worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the handset. THIS MOBILE PHONE MEETS FCC REQUIREMENTS FOR EXPOSURE TO RADIO WAVES This phone has been tested and meets the Federal Communications Commission (FCC) RF exposure guidelines for head and body worn use. For body worn operation use only with the accessories supplied. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit set by the Federal Communications Commission of the U.S. Government is 1.6 W/kg. The highest measured SAR values for the CT 9A9j model phone are: Max HEAD SAR1g = 1.559 W/kg (GSM 850)(limit 1g =1.6W/kg) MaX Body SAR1g @ 15mm separation =1.035 W/kg (GSM 850)(Limit 1g = 1.6W/kg)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 1 Producer : GPL Ghostscript 8.54 Create Date : 2008:03:25 14:28:48+01:00 Modify Date : 2008:03:25 14:28:48 Title : SAR Information2 _2_ Creator : PDFCreator Version 0.9.3 Author : BENALI Subject :EXIF Metadata provided by EXIF.tools