Avantree Technology BTCK-11 Wireless Hands Free Car Kit User Manual Z PKMN CK11 V1

Avantree Technology Co., Ltd. Wireless Hands Free Car Kit Z PKMN CK11 V1

15_BTCK-11 UserMan

材质：封面 封面封底128G双铜 + 单色印刷 内页臻品上质80g高白纸 2个小号骑马钉大约16页， 尺寸W 105 x H 75mm For a Beer ExperienceUser ManualWireless Hands Free Car KitCK11- 12 -- 11 -frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.- 10 -- 6 -6. Multi-point: Pairing and connecting 2 phonessimultaneouslyStep 1 Connect the first phone (instructions above).Step 2 Press and hold the MFB for 3 seconds to enter pairing mode.Step 3 Turn on Bluetooth on the second phone and connect with the CK11.Step 4 Reboot the CK11 by turning it off then on again. Both phones will now be connected to the CK11.This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter2. What’s in the box?A. Avantree Bluetooth car kitB. Car chargerC. USB charging cableD. Sun-visor clipE. Quick user guide / User Manual Pairing modePower SwitchComponentMFBPower On/OffManually re-connectVolume Up/downVoice control (phone feature)Double clickSlide to ON/OFFPress and hold for 3 second until the LED flashes Blue and Red alternatelyPress onceAnswer/End a call Press onceReject a call Press and hold for 1 secondRedialOperationFunctionPress once while CK11 connected to your phoneRotate the MFB to adjust the volume For a Beer ExperienceDispose of the packaging andthis product in accordance withlatest country provisions. Z-PKMN-CK11-V1- 1 -1. Product overviewContent1. Product overview2. What’s in the box3. Basic operations4. “Auto Power On” function5. Pairing and connecting6. Multi-point: Pairing and connecting 2 phones simultaneously7. Clear pairing history8. How to charge9. Product specifications198875324152634- 8 -- 7 - - 9 -7. Clear pairing historyYou may need to reset the CK11 if it is not working as expected. When reset to its factory default settings, all the paired device information will be erased.Step 1 Set the CK11 to PAIRING MODE – press and hold the MFB for 3 second until the LED flashes BLUE and RED alternately.Step 2 Double click the mute button – you will hear 2 beeps indicating a successful reset. Then it will automatically enter pairing mode.8. How to chargeWhen the battery runs low, the LED will flash every 6 seconds. Recharge the CK11 by plugging it into the supplied car charger, USB charger or PC USB port. It normally takes 3 hrs to fully charge the battery. The LED will turn red when charging and turn off when charging is completed.Charging requirements: DC5.0V/ 500mA-1A.9. Product specifications• BT Version: 4.2• Supported Profiles: A2DP, AVRCP, HSP, HFP• Operation Frequency Band: 2.4GHz~2.48GHz unlicensed ISM band• Operation Range: Class 2, Up to 30ft.• Working Time: 22 hrs• Standby Time: 600hrs• Charging Time: about 3 hrs• Charger Voltage: DC5.0V, 500mA• Battery: 650mA, BL-5B, rechargeable lithium-ion batteryDeclaration of ConformityThis device complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio - 4 -- 3 -- 2 - - 5 -5. Pairing and connectingStep 1 Power on CK11 by setting the toggle switch to ON.Step 2 Press and hold the MFB for 3 seconds to enter pairing mode (Note: On first use the CK11 will automatically enter pairing mode).Step 3 Turn on Bluetooth on your phone - search for new devices.Step 4 Select “Avantree CK11”.Note: Once paired and connected, the next time they will automatically reconnect.4. “Auto Power On/Off” functionWhen the power switch is set to “ON”, the “Auto Power On” function is activated. The device will turn on automatically the next time you open your car door.”Auto Power off” - when you leave your car and your phone disconnects from the CK-11, it will automatically turn off after about 10 minutes.The device can be turned off and the “Auto Power On/Off” function disabled by sliding the power switch to “OFF”.B. A. C. D. E. 3. Basic operationswww.avantree.com For a Beer ExperienceUser ManualHands Free Bluetooth Car KitCK11Power On/ OffMulti-function Button (MFB)MuteLED indicatorMicrophoneCharging portON OFF+-+-VOL+-VOLVOLON OFFVOLVOLPower on Hold for 3s to enterpairing modeAvantree CK11BluetoothActivate Bluetooth on phone. Search and select "Avantree CK11"Model No.: BTCK-11 www.avantree.comPHONE /VOLUMEMUTEPHONE /VOLUMEMUTEPHONE /VOLUMEMUTEPHONE /VOLUMEMUTEPHONE /VOLUMEMUTEScan me for FAQAvantree CK11Any questions? Contact:Support@avantree.com Self-service Support:•More FAQs on support.avantree.com• 100+ Step by step video Guide – youtube.com/avantree/playlistsTelephone Support (Mon-Fri): • USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm)• EU / Asia telephone No. refer to http: //www.avantree.com/contact-us(Response Time: 1 working day)FCC ID: 2AITF-BTCK-11

Navigation menu