Avantree Technology BTHS-ANC032 ANC Headphones with Bluetooth User Manual
Avantree Technology Co., Ltd. ANC Headphones with Bluetooth
user manual
Dear Customer Specification: Thank you for purchasing the Bluetooth Noise-cancelling headphone .Please read this manual carefully and follow the instructions listed in order to optimize the use of your new headphones and enjoy your music the way it was meant to be heard. Speaker Unit: 40mm Magnet: Neodymium Sensitivity:113+/-3dB Impedance: 32ohms+/-15% Frequency response range: 20~20KHz Activecancellation: Upto15~20dBBetween100~500Hz Bluetoothversion: V4.1 Operationdistance: 10m Power: 3.7V350mAh WorkingHour: MusicPlaying12hrs Features: 100 mm The Wireless Headphones is developed to deliver super roundquality with Bluetooth 4.1V CSR 8635. The Active Noise Cancelling technology reduce surroundingnosie up to 15-20dB and let you enjoy pure music without distraction. Contents: Play Music: 1. Press the Multifunction Button once to play music, and press it again to pause. 2. Short pressing "+ button" for volume up, long pressing for skipping forward. 3. Short pressing"- button" for volume down, long pressing for skipping backwards. Noise cancelling On/Off Button Call Functions: Call Answer: Press the Multifunction Button once to answer, and press again to end. Last number redial: in standby mode, press the Multifunction Button twice to redial. Volume Up/Next song (Wireless Only) Wireless Operation: 1. Press the Multifunction Button for one second, you will hear “BEEP” with the Blue Indicator IsBlinking. and the Bluetooth is in pairing mode. 2. Enable the Bluetooth on your mobilephone or the device you want to connect and scan/search for new device. 3. When N5 is found, select and connect, you will hear voice remind “BEEP”. and the Blueindicator willflash every five N5 seconds. The connection is completed. Volume Down/Previous song (Wireless Only) 90.00 mm Noise Cancelling: 1. Press the ANC Button ON, the Noise Cancelling Indicator is green. 2. After turn the noise cancelling on, you may hear a slight hissing noise, this is normal`will ceaseafter a few seconds. 3. When using noise cancelling feature, if the battery is off, the green indicator is off, if you want tocontinueusing noise cancelling feature, you need charge the battery. If you use wired connection you can continue use theheadphones. Function Overview: Operation Manual 3.5mm Jack/Jack cable Operation: USB/ mirco USB charging cable N5 Bluetooth Noise-cancelling headphone Multifunction Button (Bluetooth On/Off,Make/Answer/End/Reject Call,Pause Wireless Only) All Bluetooth Audio device Once your telephone is paired with the N5, the two devices will connect to each other automatically each time that the N5 is switched on. It is not possible to simultaneously connect several devices to N5. Warning Listening to music at high volumes for long periods can lead to hearing problems. We do not recommend using these headphones at maximum volume, particularly for long periods of time. To protect your hearing, turn down the volume of your music player before connecting your headphones. After putting on the headphones, gradually turn up the volume until you reach a suitable level. Sound levels are measured in decibels (dB). Exposure to sound 85 dB or above may result in gradual loss of hearing. Monitor your use. Hearing loss depends on the intensity of the sound and the duration. The higher the volume,the less your exposure capacity will last. The lower the volume, the longer your exposure period can be. Be responsible: pay attention to your environment (acoustic) when you are wearing your headphones and listening to music or the radio.Avoid hazardous behavior that may cause an accident for you or somebody else (pedestrians, motorcyclists, drivers, cyclists) or cause damage to property when you are wearing your headphones. Avoid hazardous behavior that may cause an accident for you or somebody else (pedestrians, motorcyclists, drivers, cyclists) or cause damage to property when you are wearing your headphones. Avantree would like to inform you that the use of stereo headphones is strictly forbidden when driving a motor vehicle. Avantree also recommends not listening to music or the radio through your headphones when riding a bicycle, a scooter or any other means of transport for which it is not compulsory to wear a helmet. Avantree can not accept any responsibility if you choose to ignore these warnings. FCC Statement This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION • Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. • This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: 2AITF-BTHS-ANC032 To locate the FCC and IC identification numbers, please look on the underside of the Avantree BTHS-ANC032. Model number BTHS-ANC032 We, Avantree, declare under our sole responsibility, that the product Avantree N5, confirms with the provisions of the following Directives: 1999/5/EC; 2004/108/EC and 2006/95/EC. The crossed-out wheelie bin symbol means that the product must be disposed of separately in the European Union. These products must not be disposed of with unsorted household waste.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Administrator Title : 可编辑的_N5说明书 2017-12-26.cdr Create Date : 2017:12:27 10:26:47+08:00 Creator Tool : CorelDRAW X7 Modify Date : 2018:08:14 18:44:31+08:00 Metadata Date : 2018:08:14 18:44:31+08:00 Producer : Corel PDF Engine Version 17.1.0.572 Document ID : uuid:60f55687-b9cf-4d69-9f67-96cb2145896e Instance ID : uuid:92da28cd-6c60-401d-8254-8700b4cf7e19 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Author : AdministratorEXIF Metadata provided by EXIF.tools