Avantree Technology BTHS-AS6S Bluetooth headset (Jogger Plus) User Manual Z PKMN AS6S 00V4

Avantree Technology Co., Ltd. Bluetooth headset (Jogger Plus) Z PKMN AS6S 00V4

User Manual

- 1 - - 2 - - 3 -- 4 - - 5 - 1. Product overview(1). Speaker(2). Next(3). LED indicator(4). Previous(5). Headband(6). USB charging socket(7). Multi-function button(MFB)(8). Microphone(9). Volume down(10). Volume up(11). NFC What’s in the box - Avantree Jogger PlusMicro USB charging cableSilicone earbudsCarrying pouchUser manual 2. Working with mobile phoneIt is important to pair the headset with your Bluetooth enabled mobile phone for first time use. 2.1 Pairing procedure:Step 1: Ensure the headset is off.Step 2: Press and hold the MFB button (about 3 - 5 seconds) until the LED blinks blue and red alternately.Step 3: Active Bluetooth on your phone and select “Avantree Jogger Plus”Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset on again, provided your phone is within range.2.2 Connect with NFC enabled mobile phoneStep 1: Make sure NFC function is turned on from your phone and that the screen is active and unlocked.Step 2: Hold the NFC mobile phone against the NFC zone of the headset (the NFC logo)Note:Since NFC antenna is located in different position of phone. It is helpful to know the position for last paring. For details on NFC, see your phone’s user manual.3. Working with two mobile phones simultaneouslyStep 1: Connect headset with the first phone as above. Then turn off the headset.Step 2: Connect headset with the second phone as above. Step 3: Tap and select “Avantree Jogger Plus” on the first phone to connect it.Step 4: Now the headset has connected with the two phones simultaneously. 4.How to use- 6 - - 7 -- 8 - - 9 -6.How to chargeWhen battery power is low, the LED indicator will flash red once every 0.5s and a beep sound will come up every 30s. Please charge your headphone. Please remove the micro-USB protector and charge the headphones via the supplied USB to AC adapter or PC USB port. It normally takes about 2.5 hours to fully charge the battery. The LED will indicate red when charging and will turn off when charging is complete.7. How to resetYou may need to reset Jogger Plus if it is not working as expected. Under standby mode, press and hold the “Next” button for 6s until the indicator flashes red and blue once, and then power it off manually. Now your Jogger Plus has been restored to its default settings. After powered on again, it will enter pairing mode directly.8. Product Specification● Bluetooth V4.0 with EDR● Support profiles: HFP, HSP, A2DP, AVRCP● Operational range: Class 2, 10 meters● Battery: 140mAh rechargeable lithium battery● Talk time: up to 9hrs● Music time: up to 8hrs● Standby time: up to 200hrs● Headset weight: 27g● Headset size: 42.5mm(L)x38.0mm(W)X26.0mm(H)● Input 5.0V , 500mA-2A(By external power supply), or 3.7V , 140mAh (By Li-ion rechargeable battery)Note: The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependant on different usage styles, settings and operating environment.For more FAQ information, please refer to support.avantree.comThis device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC ID: 2AITF-BTHS-AS6SDispose of the packaging andthis product in accordance withthe latest provisions.Z-PKMN-AS6S-00V4www.avantree.comsupport@avantree.comwww.avantree.comUser ManualSports Use Bluetooth HeadsetJogger Plus4. Previous 2. Next9. Volume down10. Volume up7. Multi-function button (MFB)5. Headband1. Speaker8. Microphone6. USB Charging socket3. LED indicatorOn / Off Press and hold MFB 2sAnswer a call Press MFB once End a call Press MFB onceReject a call Press and hold MFB 1sRedial last number Double click MFBPlay / Pause music Press MFB onceVolume up Press and hold “V+”Volume down Press and hold “V-”Next track Press “Next” oncePrevious track Press “Previous” onceButtonMFBV+V-NextPreviousFunction Operation NFCAvantree AuditionMaAvantree Jogger PlusModel No.: BTHS-AS6SFCC ID: WJ5-AS6SMade In ChinaAvantree Jogger Plus15DFCC ID: 2AITF-BTHS-AS6S11.NFC5.Working with a PC or Laptop 5.1Pairing procedure:Step1: Turn Jogger Plus off (press and hold MFB button for 2s)Step2: Press and hold MFB button for 3 - 5s until LED indicator flashes blue and red alternately.Step3: Active Bluetooth on your PC/notebook and select “Avantree Jogger Plus”.Note:Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you may need a Bluetooth audio adapter to add the feature on PC / notebook that do not. For details on how to set up with PC / notebook, please see support.avantree.com. For a Beer Experience For a Beer ExperienceDeutsch Anweisungen Download-URL: Avantree.com/manual/Jogger Plus/deFrançais instructions URL de téléchargement: Avantree.com/manual/Jogger Plus/fr한국어 지침 다운로드 URL: Avantree.com/manual/Jogger Plus/koIstruzioni italiani URL di download: Avantree.com/manual/Jogger Plus/itInstrucciones españoles descarga URL: Avantree.com/manual/Jogger Plus/es 日本語説明書のダウンロードURL: Avantree.com/manual/Jogger Plus/ja คำแนะนำไทย URL ที่ดาวน์โหลด: Avantree.com/manual/Jogger Plus/thČeští návod ke stažení URL: Avantree.com/manual/Jogger Plus/cs כתובת אתר להורדה הוראות עברית: Avantree.com/manual/Jogger Plus/he中文使用说明书下载地址: Avantree.com/manual/Jogger Plus/cnAvantree Technology Co., Ltd.The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd,Luohu District, Shenzhen, Guangdong,China.BTHS-AS6S

Navigation menu