Avantree Technology BTTC-200L Wireless Audio Transmitter/Receiver 2-in-1 User Manual Z PKMN TC200L F V1

Avantree Technology Co., Ltd. Wireless Audio Transmitter/Receiver 2-in-1 Z PKMN TC200L F V1

15_BTTC-200L UserMan

- 9 -10. Clear Pairing HistoryYou may need to clear pairing history of New Saturn Pro if it is not working as expected. After that, all the paired devices information under BOTH transmitter and receiver mode will be erased.Step 1. Ensure New Saturn Pro is in PAIRING MODE - While off, press MFB for 4-6 seconds until you see the LED flash BLUE rapidly OR the LED flashBLUE and RED alternately.Step 2. When in paring mode, double click MFB, LED flashes BLUE and RED simultaneously (like PINK) for about 2 seconds.How to get the maximum range Best ResultRLNew Saturn Pro & Mobile Wear the same side! 10mOpen air, noobstructions11. LED Indicator- 12 -12. Product Specification• Bluetooth 3.0('5• Bluetooth profile: A2DP and AVRCP (Receiver mode ONLY)• Audio codec: aptX-LL, aptX, SBC• Operating Range: Class 2, 10 meters• Transmitter mode working time: up to 9 hours• Receiver mode working time: up to 8 hours• Standby time: up to 250 hours• Charging time: around 2-3 hours• Charging input voltage: DC 5V• Battery: 270mAH rechargeable Li-ion battery• Weight: Approx. 20g NOTE:The working and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles and environments.- 13 -- 14 - - 15 - - 16 -2. Product Overview & Package ContentA．Avantree New Saturn ProB．3.5mm audio cableC．RCA audio cableD．3.5mm audio connectorE．USB charging cableF．User manualG．Quick guideH．Warranty card- 2 - - 3 -3. Power On / OffFirstly, please ensure the New Saturn Pro is off, then push the switch button to the mode (Transmitter or Receiver) that you want.Turn On: Press and hold the MFB button for about 2 seconds until the blue LED is on for 1 second.Turn Off: Press and hold the MFB button for about 2 seconds until the red LED is on for 1 second and then goes off.4. Use as a TransmitterBefore pairing, please make sure your Bluetooth receiver device supports true stereo audio (such as Bluetooth stereo headset Avantree Audition Pro or Bluetooth speaker Torpedo Plus).A. Ensure New Saturn Pro is off, then slide the switch button to Transmitter mode.B. Put New Saturn Pro into pairing mode by pressing and holding the MFB for around 4-6 seconds until LED flashes blue rapidly.C. Put your Bluetooth headphones/speaker/other receiving device into pairing mode.D. Keep them within 1 meter, wait until LEDs lights BLUE for 1 second.E. Connect New Saturn Pro to the audio output port of the audio source such asyour TV, iPod etc. via the audio cable.- 4 -6. Using 2 New Saturn Pros as a PairA. Put one New Saturn Pro into Transmitter Mode, press and hold MFB button until LED flashes blue rapidly;B. Put another New Saturn Pro into Receiver Mode, press and hold MFB button until LED flashes red and blue alternatively.C. Keep them within 1 meter and wait for around 5-7 seconds, until the LED lights on BLUE 1 second, which indicates a successful connection.D. Connect the transmitter to an audio source such as a TV or MP3 player and the receiver to the receiving device, such as a speaker or headphones.Note: If you always use them as a pair, we have a pre-paired set for you, which is truly plug & play. Please search “Avantree Lock” for it.- 7 -7. ReconnectionOnce powered on, New Saturn Pro will reconnect with the last connected device automatically within 5 seconds. If not, you can press the MFB once to stimulate the process.NOTE:When it is NOT charging, New Saturn Pro will automatically power off if no devices can be connected within 30 minutes. 8. Get Maximum Stable Range.Please make sure there are no obstacles between receiver and transmitter, and place the two devices on the same side of your body if you are wearing them. A. Ensure New Saturn Pro is off, then slide the switch button to Receiver mode.B. Put New Saturn Pro into pairing mode by pressing and holding the MFB for around 4–6 seconds till Blue and Red LED light flashes alternatively.C. Enable Bluetooth on your smartphone / tablet / notebook, search for 'Avantree 6DWXUQ3URDQGFOLFN³FRQQHFW´(JL3KRQHWDS6HWWLQJVĺ%OXHWRRWKĺ2QD. Connect New Saturn Pro to the audio input port of home hi-fi stereo system via the included 3.5mm audio cable.NOTE:1. The pairing mode will last 3 minutes. The receiver will turn off if no devices can beconnected within 3 minutes.2. Please do not change Transmitter or Receiver mode after powering on New Saturn Pro. When you need to pair another device, please turn off the device first, then choose the mode you need.3. When New Saturn Pro is used as a receiver, you can short press MFB to control pause/play of music.www.avantree.comUser Manual(R[KZUUZN'[JOU:XGTYSOZZKX8KIKO\KXOTAvantree New Saturn ProFCC ID: $,7)%77&/Incorrect position13.Declaration of ConformityFCC:This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC ID: $,7)%77&/ To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.Any questions? Contact:Support@avantree.comTelephone Support (Mon-Fri): • USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm)• UK: +44 20 8068 2023 (EN, CET 10am-7pm)• Germany: +49 32221097297 (DE, CET 10am-7pm)• Italy: +39 06 9480 3330 (IT, CET 9:30am-12:30am)• France: + 33 176340312 (FR, CET 8am-10am)• Spain: + 34 931786261 (ES, CET 2:30pm-4:30pm)• Asia: + 86 755 8228 1190 / 7741-7746 (CN & EN, BJT 9am-5pm)• Australia: + 61 2 8310 9897 (CN & EN, BJT 9am-5pm)Self-service Support:• 100+ Step by step video Guide – youtube.com/avantree/playlists• 300+ FAQ: support.avantree.com(Response Time: 4-24h, excl. holidays)NOTE:1. During pairing mode, New Saturn Pro will turn off if no devices can be paired andconnected within 3 minutes.2. When you change Transmitter or Receiver mode running on battery, New Saturn Pro will automatically power off. Please restart it manually for use.3. When you need to pair another device, please turn off the device first, then choose the mode you need. 5. Use as a Receiver- 5 - - 6 -9. ChargingWhen the LED flashes red, you should recharge the device. It normally takes about 2 hours to fully charge the battery. The LED will stay red when charging and will turn off when charging is complete.Charging requirement:You can connect New Saturn Pro via the supplied micro USB cable to your own USB chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC USB port. It’s ok to use most mobile phone chargers on the market.- 10 - - 11 -BCD- 1 -AEFSimply Convenientwww.avantree.comUser Manual(R[KZUUZN'[JOU:XGTYSOZZKX8KIKO\KX9KZNew Saturn Pro- 8 -Z-PKMN-TC200L-F-V1www.avantree.comsupport@avantree.comMore FAQs on support.avantree.comVideo user guide: Search “Avantree Saturn Pro” on Youtube.comTelephone support refer to http://www.avantree.com/contact-usEmail support: support@avantree.comTransmitter / Receiver switch Micro USB cableCharge from a wall charger Charge from PCContent1. Features & aptX Low Latency2. Product Overview & Package Content3. Power On / Off4. Use as a Transmitter 5. Use as a Receiver6. Reconnection7. Get Maximum Stable Range8. Charging9. Using 2 New Saturn Pros as a Pair10. Clear Pairing History11. LED Indicator12. Product Specification13. Declaration of Conformity111121314108875323TransmitterPress MFB 4s, LED blinks bluequicklyGet headset into pairing modePairingTransmitter ModeWait for 5~15secs, both LEDs blink blue slowly Connect to TV’s audio output portEnjoyConnectedMode1MTransmitterReceiverReceiverAvantree Saturn ProSearch & ConnectedEnjoyPress MFB 4s, LED blinks blueand red alternativelyEnter pairing modeReceiver ModeConnectedConnectedConnect to speaker’s audio input port.1MTransmitterReceiverUse two Saturn Pros as a pair Connectto TVConnectedPress MFB 4s, LED blinks blue and redPress MFB 4s, LED blinksblue and redPairingTransmitter ModeWait for 5s until both LEDs blink blue slowly Connectto headsetEnjoyReceiver Mode1MTransmitter Receiver TransmitterReceiverStatus LED indicatorPairing mode under Transmitter mode. Lasts for 3 minutes LED flashes BLUE rapidlyPairing mode under Receiver mode. Lasts for 3 minutes LED flashes BLUE then RED alternativelyStandby mode. Not connected to anyother device LED flashes BLUE once every secondDevice connected with SBC codecDevice connected with aptX codecLED flashes BLUE twice every 5 secondsDevice connected with aptX LOW LATENCY codecLow battery LED flashes REDThe Avantree New Saturn Pro is a 2-in-1 Bluetooth receiver and transmitter incorporating the latest "aptX Low Latency" codec for high quality Bluetooth audio streaming.The New Saturn Pro is simple to use and enables any audio device to transmit and receive. For example, it can be used to enable a phone to transmit music to a home stereo system, or to allow a TV to transmit audio to a Bluetooth enabled speaker system or headphones.With its low latency codec, the New Saturn Pro is suitable for online gaming, TV audio transmission, real-time music recording, etc.To take advantage of the better performance of the aptX Low Latency Codec, Bluetooth device must support the same codec. If the Bluetooth device only supports the standard aptX codec, or the SBC one, those codecs will be used instead.Audio delay when paired with different headphones/receiver-Headphones/receiver support - The audio delay will beaptX Low Latency codec ~40msaptX codec ~70msSBC codec (most standard Bluetooth audio) ~220ms1.Features & aptX Low LatencyG HAvantree New Saturn Pro2U]2GZKTI_(R[KZUUZN'JGVZKXScan for video user guide English Deutsch Français Italiano Español 06/1001/0521/2516/20 11/15----- ----- ----- ----- ----- LED flashes WHITE once every 5 secondsLED flashes WHITE twice every 5 seconds

Navigation menu