Avaya Cable Users Manual JAN 00, Guide
2015-06-01
: Avaya Avaya-Cable-Users-Manual-734719 avaya-cable-users-manual-734719 avaya pdf
Open the PDF directly: View PDF 
.
Page Count: 194
| Download | |
| Open PDF In Browser | View PDF |
BayRS Software Version 14.10 Part No. 308604-14.10 Rev 01 January 2000 4401 Great America Parkway Santa Clara, CA 95054 Cable Guide Copyright © 1999 Nortel Networks All rights reserved. Printed in the USA. January 2000. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks NA Inc. The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that license. A summary of the Software License is included in this document. Trademarks NORTEL NETWORKS is a trademark of Nortel Networks. AFN, AN, BCN, and BLN are registered trademarks and BayStream and Passport are trademarks of Nortel Networks. Microsoft, MS, MS-DOS, Win32, Windows, and Windows NT are registered trademarks of Microsoft Corporation. All other trademarks and registered trademarks are the property of their respective owners. Restricted Rights Legend Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013. Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, Nortel Networks NA Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks NA Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. APortions of the code in this software product may be Copyright © 1988, Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that such portions of the software were developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission. SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties). Nortel Networks NA Inc. Software License Agreement NOTICE: Please carefully read this license agreement before copying or using the accompanying software or installing the hardware unit with pre-enabled software (each of which is referred to as “Software” in this Agreement). BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT. THE TERMS EXPRESSED IN THIS AGREEMENT ARE THE ONLY TERMS UNDER WHICH NORTEL NETWORKS WILL PERMIT YOU TO USE THE SOFTWARE. If you do not accept ii 308604-14.10 Rev 01 these terms and conditions, return the product, unused and in the original shipping container, within 30 days of purchase to obtain a credit for the full purchase price. 1. License Grant. Nortel Networks NA Inc. (“Nortel Networks”) grants the end user of the Software (“Licensee”) a personal, nonexclusive, nontransferable license: a) to use the Software either on a single computer or, if applicable, on a single authorized device identified by host ID, for which it was originally acquired; b) to copy the Software solely for backup purposes in support of authorized use of the Software; and c) to use and copy the associated user manual solely in support of authorized use of the Software by Licensee. This license applies to the Software only and does not extend to Nortel Networks Agent software or other Nortel Networks software products. Nortel Networks Agent software or other Nortel Networks software products are licensed for use under the terms of the applicable Nortel Networks NA Inc. Software License Agreement that accompanies such software and upon payment by the end user of the applicable license fees for such software. 2. Restrictions on use; reservation of rights. The Software and user manuals are protected under copyright laws. Nortel Networks and/or its licensors retain all title and ownership in both the Software and user manuals, including any revisions made by Nortel Networks or its licensors. The copyright notice must be reproduced and included with any copy of any portion of the Software or user manuals. Licensee may not modify, translate, decompile, disassemble, use for any competitive analysis, reverse engineer, distribute, or create derivative works from the Software or user manuals or any copy, in whole or in part. Except as expressly provided in this Agreement, Licensee may not copy or transfer the Software or user manuals, in whole or in part. The Software and user manuals embody Nortel Networks’ and its licensors’ confidential and proprietary intellectual property. Licensee shall not sublicense, assign, or otherwise disclose to any third party the Software, or any information about the operation, design, performance, or implementation of the Software and user manuals that is confidential to Nortel Networks and its licensors; however, Licensee may grant permission to its consultants, subcontractors, and agents to use the Software at Licensee’s facility, provided they have agreed to use the Software only in accordance with the terms of this license. 3. Limited warranty. Nortel Networks warrants each item of Software, as delivered by Nortel Networks and properly installed and operated on Nortel Networks hardware or other equipment it is originally licensed for, to function substantially as described in its accompanying user manual during its warranty period, which begins on the date Software is first shipped to Licensee. If any item of Software fails to so function during its warranty period, as the sole remedy Nortel Networks will at its discretion provide a suitable fix, patch, or workaround for the problem that may be included in a future Software release. Nortel Networks further warrants to Licensee that the media on which the Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days from the date Software is first shipped to Licensee. Nortel Networks will replace defective media at no charge if it is returned to Nortel Networks during the warranty period along with proof of the date of shipment. This warranty does not apply if the media has been damaged as a result of accident, misuse, or abuse. The Licensee assumes all responsibility for selection of the Software to achieve Licensee’s intended results and for the installation, use, and results obtained from the Software. Nortel Networks does not warrant a) that the functions contained in the software will meet the Licensee’s requirements, b) that the Software will operate in the hardware or software combinations that the Licensee may select, c) that the operation of the Software will be uninterrupted or error free, or d) that all defects in the operation of the Software will be corrected. Nortel Networks is not obligated to remedy any Software defect that cannot be reproduced with the latest Software release. These warranties do not apply to the Software if it has been (i) altered, except by Nortel Networks or in accordance with its instructions; (ii) used in conjunction with another vendor’s product, resulting in the defect; or (iii) damaged by improper environment, abuse, misuse, accident, or negligence. THE FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered files, data, or programs. 4. Limitation of liability. IN NO EVENT WILL NORTEL NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY COST OF SUBSTITUTE PROCUREMENT; SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES; OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE, EVEN IF NORTEL NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT 308604-14.10 Rev 01 iii SHALL THE LIABILITY OF NORTEL NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT EXCEED THE PRICE PAID TO NORTEL NETWORKS FOR THE SOFTWARE LICENSE. 5. Government Licensees. This provision applies to all Software and documentation acquired directly or indirectly by or on behalf of the United States Government. The Software and documentation are commercial products, licensed on the open market at market prices, and were developed entirely at private expense and without the use of any U.S. Government funds. The license to the U.S. Government is granted only with restricted rights, and use, duplication, or disclosure by the U.S. Government is subject to the restrictions set forth in subparagraph (c)(1) of the Commercial Computer Software––Restricted Rights clause of FAR 52.227-19 and the limitations set out in this license for civilian agencies, and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS 252.227-7013, for agencies of the Department of Defense or their successors, whichever is applicable. 6. Use of Software in the European Community. This provision applies to all Software acquired for use within the European Community. If Licensee uses the Software within a country in the European Community, the Software Directive enacted by the Council of European Communities Directive dated 14 May, 1991, will apply to the examination of the Software to facilitate interoperability. Licensee agrees to notify Nortel Networks of any such intended examination of the Software and may procure support and assistance from Nortel Networks. 7. Term and termination. This license is effective until terminated; however, all of the restrictions with respect to Nortel Networks’ copyright in the Software and user manuals will cease being effective at the date of expiration of the Nortel Networks copyright; those restrictions relating to use and disclosure of Nortel Networks’ confidential information shall continue in effect. Licensee may terminate this license at any time. The license will automatically terminate if Licensee fails to comply with any of the terms and conditions of the license. Upon termination for any reason, Licensee will immediately destroy or return to Nortel Networks the Software, user manuals, and all copies. Nortel Networks is not liable to Licensee for damages in any form solely by reason of the termination of this license. 8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data or information without first obtaining any required export licenses or other governmental approvals. Without limiting the foregoing, Licensee, on behalf of itself and its subsidiaries and affiliates, agrees that it will not, without first obtaining all export licenses and approvals required by the U.S. Government: (i) export, re-export, transfer, or divert any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports are restricted or embargoed under United States export control laws and regulations, or to any national or resident of such restricted or embargoed countries; or (ii) provide the Software or related technical data or information to any military end user or for any military end use, including the design, development, or production of any chemical, nuclear, or biological weapons. 9. General. If any provision of this Agreement is held to be invalid or unenforceable by a court of competent jurisdiction, the remainder of the provisions of this Agreement shall remain in full force and effect. This Agreement will be governed by the laws of the state of California. Should you have any questions concerning this Agreement, contact Nortel Networks, 4401 Great America Parkway, P.O. Box 58185, Santa Clara, California 95054-8185. LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN NORTEL NETWORKS AND LICENSEE, WHICH SUPERSEDES ALL PRIOR ORAL AND WRITTEN AGREEMENTS AND COMMUNICATIONS BETWEEN THE PARTIES PERTAINING TO THE SUBJECT MATTER OF THIS AGREEMENT. NO DIFFERENT OR ADDITIONAL TERMS WILL BE ENFORCEABLE AGAINST NORTEL NETWORKS UNLESS NORTEL NETWORKS GIVES ITS EXPRESS WRITTEN CONSENT, INCLUDING AN EXPRESS WAIVER OF THE TERMS OF THIS AGREEMENT. iv 308604-14.10 Rev 01 Contents Preface Text Conventions ............................................................................................................. xv Acronyms .........................................................................................................................xvi Hard-Copy Technical Manuals ........................................................................................xvii How to Get Help .............................................................................................................xvii Chapter 1 Cable Basics Before You Begin ............................................................................................................1-2 How to Use This Guide ...................................................................................................1-2 Finding Cables by Category .....................................................................................1-3 Finding Cables by Order Number or Description .....................................................1-4 Cable Connector Basics .................................................................................................1-8 Connector Terminology ............................................................................................1-8 Connector Types ......................................................................................................1-9 Building Your Own Cables ............................................................................................1-11 Chapter 2 Console/Modem Cables Console Interface to ASCII Terminal (Order No. 7525) ...................................................2-3 AFN/AN Console Interface to ASCII Terminal (Order No. 7526) ....................................2-4 AT Serial Console (Order No. 7527) ...............................................................................2-5 Console/Modem Interface to RS-232-C Modem (Order No. 7825) .................................2-6 Backbone Console Interface to RS-232-C Modem (Order No. 77850) ...........................2-7 Passport 2430 and Passport 5430 Fast Branch Router Console Interface to PC (Order No. AA0011026) ..................................................................................................2-8 308604-14.10 Rev 01 v Chapter 3 LAN Cables Ethernet Cable (Order No. 7115) ....................................................................................3-3 Token Ring MAU Cable (Order No. 7125) .......................................................................3-4 Token Ring MAU Cable with Ferrite Bead (Order No. 7126) ...........................................3-5 Token Ring to RJ-11 Cable (Order No. 7128) .................................................................3-6 FDDI FSD to FSD (Order No. 7135) ...............................................................................3-7 FDDI FSD to Straight Tip (Order No. 7136) ....................................................................3-7 FDDI-Type SC Duplex to Straight Tip (Order No. 7164 for Single-Mode Cable) ............3-8 FDDI-Type SC Duplex to SC Duplex (Order No. 7163 for Multimode Cable) (Order No. 7165 for Single-Mode Cable) ........................................................................3-9 ATM Cable, SC to Straight Tip MMF (Order No. 7169) .................................................3-10 Chapter 4 HSSI Cables HSSI DCE to DTE (10 Ft: Order No. 7830; 50 Ft: Order No. 7831) ...............................4-3 HSSI Crossover (Order No. 7832) ..................................................................................4-5 Chapter 5 E1/T1 Cables MCE1 DB9 to Mod Jack Cable (Order No. AA0018001) ................................................5-4 MCE1 DB9 to Unterminated Cable (Order No. AA0018002) ..........................................5-5 Quad MCT1 Clock Cable (Order No. AA0018006) .........................................................5-6 MCE1 RJ-45 to RJ-45 Cable (Order No. AA0018014) ...................................................5-7 MCE1 RJ-45 to Unterminated Cable (Order No. AA0018015) .......................................5-8 Quad MCT1 15-Pin to 15-Pin Crossover Cable (Order No. AA0018021) .......................5-9 Quad MCT1 15-Pin to 15-Pin Straight-Through Cable (Order No. AA0018022) ..........5-10 ATM E1 RJ-45 to RJ-45 Cable (Order No. AA0018040) ...............................................5-11 MCT1 Clock Cable (Order No. 7150) ............................................................................5-12 MCT1 15-Pin Loopback Connector (Order No. 7151) ..................................................5-13 MCT1 RJ-48 Loopback Connector (Order No. 7152) ...................................................5-14 MCT1 Crossover Cable (Order No. 7153) ....................................................................5-15 MCT1 Loopback Cable (Order No. 7154) .....................................................................5-16 MCT1 Loopback Cable (Order No. 7155) .....................................................................5-17 MCT1 Straight-Through Cable (Order No. 7156) ..........................................................5-18 MCT1 Straight-Through Cable (Order No. 7157) ..........................................................5-19 MCE1 Crossover Cable (Order No. 7160) ....................................................................5-20 vi 308604-14.10 Rev 01 MCE1 Straight-Through Cable (Order No. 7161) .........................................................5-21 MCE1 Coaxial Cable (Order No. 7162) ........................................................................5-22 MCE1 DB9 to DB15 Straight-Through Cable (Order No. 7167) ...................................5-23 MCE1 DB9 to DB15 Crossover Cable (Order No. 7168) ..............................................5-24 T1 to CSU DTE (Order No. 7401) .................................................................................5-25 T1 to Customer Premise Equipment (Order No. 7415) ................................................5-26 CSU Network Receptacle to RJ-45 (Order No. 7650) ..................................................5-27 CSU Network Receptacle to Spade Terminals (Order No. 7750) .................................5-28 Chapter 6 Standard Synchronous Cables 15-Pin to F X.21 Synchronous Pass-Through (Order No. AA0018003) .........................6-4 44-Pin F X.21 Synchronous Pass-Through (Order No. AA0018004) .............................6-6 50-Pin to F X.21 Synchronous Pass-Through (Order No. AA0018005) .........................6-8 15-Pin to RS-530 Straight-Through (Order No. AA0018011) .......................................6-10 44-Pin to RS-530 Straight-Through (Order No. AA0018012) .......................................6-12 50-Pin to RS-530 Straight-Through (Order No. AA0018013) .......................................6-14 50-Pin to V.28 Cable (Order No. AA0018023) ..............................................................6-16 15-Pin to V.35M (Order No. 7158) ................................................................................6-17 44-Pin to V.35M (Order No. 7159) ................................................................................6-18 15-Pin D-Sub to V.35: No DTR, for WAN (Order No. 7215) ..........................................6-20 15-Pin D-Sub to V.35 with DTR (Order No. 7216) ........................................................6-22 RS-232 Pass-Through: 15-Pin to RS-232 (Order No. 7218) ........................................6-23 V.35 Pass-Through: 15-Pin to V.35 (Order No. 7219) ...................................................6-24 44-Pin D-Sub to V.35: Leased Line or V.25bis (Order No. 7220) ..................................6-26 15-Pin D-Sub to X.21 (Order No. 7221) ........................................................................6-28 44-Pin D-Sub to X.21 (Order No. 7224) ........................................................................6-29 15-Pin D-Sub to RS-232 (Order No. 7255) ...................................................................6-30 15-Pin D-Sub to V.28 (Order No. 7256) ........................................................................6-31 15-Pin Crossover (Order No. 7260) ..............................................................................6-32 15-Pin D-Sub to RS-422 (Order No. 7315) ...................................................................6-34 44-Pin D-Sub to RS-422: Leased Line or V.25bis (Order No. 7318) .............................6-36 44-Pin D-Sub to RS-232: Leased Line or V.25bis (Order No. 7826) .............................6-38 RS-232 Pass-Through: 44-Pin to RS-232 (Order No. 7833) ........................................6-39 V.35 Pass-Through: 44-Pin to V.35 (Order No. 7834) ...................................................6-40 V.35 Crossover: 44-Pin to 44-Pin (Order No. 7835) ......................................................6-42 308604-14.10 Rev 01 vii V.35 Crossover: 44-Pin to 15-Pin (Order No. 7836) ......................................................6-44 44-Pin D-Sub to V.28 (Order No. 7837) ........................................................................6-46 50-Pin to V.35 (Order No. 7932) ...................................................................................6-48 50-Pin to RS-232 (Order No. 7934) ..............................................................................6-50 50-Pin to X.21 (Order No. 7936) ...................................................................................6-51 50-Pin to RS-422 (Order No. 7937) ..............................................................................6-52 50-Pin to 50-Pin Crossover (Order No. 7938) ...............................................................6-54 50-Pin to 15-Pin Crossover (Order No. 7939) ...............................................................6-56 50-Pin to 44-Pin Crossover (Order No. 7940) ...............................................................6-58 15-Pin to F RS-232 Synchronous Pass-Through (Order No. 7941) .............................6-60 15-Pin to F V.35 Synchronous Pass-Through (Order No. 7942) ...................................6-61 44-Pin to F RS-232 Synchronous Pass-Through (Order No. 7943) .............................6-62 44-Pin to F V.35 Synchronous Pass-Through (Order No. 7944).................................. 6-63 50-Pin to F RS-232 Synchronous Pass-Through (Order No. 7945) .............................6-65 50-Pin to F V.35 Synchronous Pass-Through (Order No. 7946).................................. 6-66 Chapter 7 Dial-Up Services Cables 15-Pin D-Sub to RS-422: V.25bis (Order No. 7116) .......................................................7-3 15-Pin D-Sub to RS-422: Raise DTR (Order No. 7117) .................................................7-5 15-Pin D-Sub to RS-232: Raise DTR (Order No. 7118) .................................................7-7 15-Pin D-Sub to RS-232: V.25bis (Order No. 7119) .......................................................7-8 15-Pin D-Sub to V.35: V.25bis (Order No. 7120) .............................................................7-9 15-Pin D-Sub to V.35: Raise DTR (Order No. 7121) .....................................................7-10 44-Pin D-Sub to V.35: Raise DTR (Order No. 7137) .....................................................7-11 44-Pin D-Sub to RS-232: Raise DTR (Order No. 7138) ...............................................7-13 44-Pin D-Sub to RS-422: Raise DTR (Order No. 7139) ...............................................7-14 50-Pin to V.35: Raise DTR (Order No. 7933) ................................................................7-16 50-Pin to RS-232: Raise DTR (Order No. 7935) ..........................................................7-18 viii 308604-14.10 Rev 01 Chapter 8 Cable Adapters 44-Pin to 15-Pin RS-232 Cable Adapter (Order No. 7122) .............................................8-3 44-Pin to 15-Pin X.21 Cable Adapter (Order No. 7123) .................................................8-5 44-Pin to 15-Pin V.35 Cable Adapter (Order No. 7124) ..................................................8-7 44-Pin to 15-Pin RS-422 Cable Adapter (Order No. 7131) .............................................8-9 50-Pin to 44-Pin Cable Adapter (Order No. 7947) ........................................................8-11 50-Pin to 15-Pin V.35 Cable Adapter (Order No. 7948) ................................................8-14 50-Pin to 15-Pin RS-422 Cable Adapter (Order No. AA0018024) ................................8-16 Model 460F-BN G.703 Coaxial to RJ-45 Adapter (Balun) (Order No. AA0018040) .....8-18 Passport 5430 External Modem Adapter (Order No. 309329-A) ..................................8-19 308604-14.10 Rev 01 ix Figures Figure 1-1. Connector Types ....................................................................................1-10 308604-14.10 Rev 01 xi Tables Table 1-1. Cable Category Locations .......................................................................1-3 Table 1-2. Cables Listed by Order Number ...............................................................1-4 Table 1-3. Connector Terms ......................................................................................1-8 Table 2-1. Console/Modem Cables ...........................................................................2-1 Table 3-1. Local Area Network Cables .....................................................................3-1 Table 4-1. HSSI Cables ............................................................................................4-1 Table 5-1. E1/T1 Cables ...........................................................................................5-1 Table 6-1. Standard Synchronous Cables ................................................................6-1 Table 7-1. Dial-Up Services Cables ..........................................................................7-1 Table 8-1. Cable Adapters ........................................................................................8-1 308604-14.10 Rev 01 xiii Preface This guide describes how to attach the correct cables to the Nortel Networks™ router you are installing. This guide provides the following information: • Cable connector diagrams • Pin/socket wiring configurations Text Conventions This guide uses the following text conventions: bold text Indicates command names and options and text that you need to enter. Example: Use the dinfo command. italic text Indicates file and directory names, new terms, book titles, and variables in command syntax descriptions. Where a variable is two or more words, the words are connected by an underscore. Example: If the command syntax is: show atvalid_route is one variable and you substitute one value for it. screen text Indicates system output, for example, prompts and system messages. Example: Set Trap Monitor Filters 308604-14.10 Rev 01 xv Cable Guide Acronyms This guide uses the following acronyms: xvi ATM asynchronous transfer mode AUI attachment unit interface CCITT Consultative Committee on International Telegraph and Telephone (now ITU-T) CPE customer premise equipment CSMA/CD carrier sense multiple access/collision detection CSU channel service unit DCE data communication equipment DSU digital service unit DTE data terminal equipment DTR data terminal ready EIA Electronic Industries Association FC fiber channel FDDI Fiber Distributed Data Interface FSD fixed shroud duplex HSSI High Speed Serial Interface IEEE Institute of Electrical and Electronic Engineers LAN local area network MAU media access unit/multistation access unit PMD physical medium dependent RJ registered jack SC subscriber connector STP shielded twisted pair WAN wide area network 308604-14.10 Rev 01 Preface Hard-Copy Technical Manuals You can print selected technical manuals and release notes free, directly from the Internet. Go to support.baynetworks.com/library/tpubs/. Find the product for which you need documentation. Then locate the specific category and model or version for your hardware or software product. Using Adobe Acrobat Reader, you can open the manuals and release notes, search for the sections you need, and print them on most standard printers. You can download Acrobat Reader free from the Adobe Systems Web site, www.adobe.com. You can purchase selected documentation sets, CDs, and technical publications through the collateral catalog. The catalog is located on the World Wide Web at support.baynetworks.com/catalog.html and is divided into sections arranged alphabetically: • The “CD ROMs” section lists available CDs. • The “Guides/Books” section lists books on technical topics. • The “Technical Manuals” section lists available printed documentation sets. How to Get Help If you purchased a service contract for your Nortel Networks product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. If you purchased a Nortel Networks service program, contact one of the following Nortel Networks Technical Solutions Centers: Technical Solutions Center Telephone Number Billerica, MA 800-2LANWAN (800-252-6926) Santa Clara, CA 800-2LANWAN (800-252-6926) Valbonne, France 33-4-92-96-69-68 Sydney, Australia 61-2-9927-8800 Tokyo, Japan 81-3-5740-1700 308604-14.10 Rev 01 xvii Chapter 1 Cable Basics This guide provides all the information you need to find a specific cable for your Nortel Networks router hardware platform. This chapter explains: • What you need to know • How to use this guide -- How to find cables by category -- How to find cables by order number or description • Some basics about cable connectors, including: -- Connector terminology -- Basic connector types • How to build your own cables If you want to build a cable to meet special requirements, this guide also provides pinout information and references to the appropriate documents for industry specification, standards, or recommendations. Recommended documents typically contain technical information to help you determine your requirements for cable installation path, cable type, maximum cable length, and so on. 308604-14.10 Rev 01 1-1 Cable Guide Before You Begin To ensure that you order, make, or use the appropriate cable for your router hardware platform, first answer the following questions: • What is the connection category, order number, or physical description of the cable I want to find? • What type of physical interface am I connecting to, and what type of cable connector (plug or receptacle) do I need to make this connection? Note: Determining the connector type you need can significantly decrease the time it takes to locate the appropriate cable. For example, if you want to connect to a 44-position synchronous interface, look only for synchronous cables with 44-pin plugs. • What type of device do I want to connect to the router hardware platform’s physical interface? For example, do you want to connect a modem or a console to the router hardware platform? Each function requires a different cable, even though you connect to the same physical interface on the router hardware platform. • What version of software is my router hardware platform using? For example, newer features such as dial-up services may require special cable pin configurations to interoperate with earlier versions of Nortel Networks software. How to Use This Guide You can find the Nortel Networks cable you want by: 1-2 • Cable connection category • Cable order number or description 308604-14.10 Rev 01 Cable Basics Finding Cables by Category This guide organizes Nortel Networks cables into seven connection categories. Table 1-1 shows the chapter that contains each category. Table 1-1. Cable Category Locations Category Chapter Console/modem 2 Local area network (LAN) • Ethernet • Token ring • Fiber Distributed Data Interface (FDDI) • Asynchronous transfer mode (ATM) 3 High Speed Serial Interface (HSSI) 4 Multichannel E1, T1, T1 framer, and channel service unit (CSU) 5 Standard synchronous • Coaxial • Crossover and loopback • Straight-through • Pass-through 6 Dial-up services 7 Cable adapters 8 After determining the connection category and type of connector that you need, go to the appropriate chapter. The table at the beginning of each chapter provides additional information about each cable in that category. 308604-14.10 Rev 01 1-3 Cable Guide Finding Cables by Order Number or Description Table 1-2 lists the order number, a brief description, and the page number of each cable in this guide. Table 1-2. Order No. Cables Listed by Order Number Physical Cable Description Page AA0011026 RJ-45 to 9-pin D-sub plug (for console interface to PC connection) 2-8 AA0018001 MCE1 DB9 to mod jack cable (9-pin to RJ-45) 5-4 AA0018002 MCE1 DB9 to unterminated end cable (9-pin to unterminated end) 5-5 AA0018003 X.21 synchronous pass-through (15-pin plug to X.21 receptacle) 6-4 AA0018004 X.21 synchronous pass-through (44-pin plug to X.21 receptacle) 6-6 AA0018005 X.21 synchronous pass-through (50-pin plug to X.21 receptacle) 6-8 AA0018006 Quad MCT1 clock cable 5-6 AA0018011 RS-530 straight-through cable (15-pin to RS-530 plug) 6-10 AA0018012 RS-530 straight-through cable (44-pin to RS-530 plug) 6-12 AA0018013 RS-530 straight-through cable (50-pin to RS-530 plug) 6-14 AA0018014 MCE1 RJ-45 to RJ-45 5-7 AA0018015 MCE1 RJ-45 to unterminated end cable 5-8 AA0018021 Quad MCT1 crossover cable (15-pin D-sub plug to 15-pin D-sub plug) 5-9 AA0018022 Quad MCT1 straight-through cable (15-pin D-sub plug to 15-pin D-sub plug) 5-10 AA0018023 50-pin to V.28 cable 6-16 AA0018024 50-pin to 15-pin RS-422 cable adapter 8-16 AA0018040 ATM E1 RJ-45 to RJ-45 cable and Balun 5-11 8-18 7115 15-pin Ethernet/802.3 AUI plug to 15-position Ethernet/802.3 AUI receptacle 3-3 7116 15-pin D-sub plug to RS-422 plug (V.25bis for Series 7 software) 7-3 7117 15-pin D-sub plug to RS-422 plug (raise DTR for Series 7 software) 7-5 7118 15-pin D-sub plug to RS-232-C plug (raise DTR for Series 7 software) 7-7 7119 15-pin D-sub plug to RS-232-C plug (V.25bis for Series 7 software) 7-8 7120 15-pin D-sub plug to V.35 plug (V.25bis for Series 7 software) 7-9 7121 15-pin D-sub plug to V.35 plug (raise DTR for Series 7 software) 7-10 7122 44-pin to 15-pin RS-232-C cable adapter 8-3 (continued) 1-4 308604-14.10 Rev 01 Cable Basics Table 1-2. Cables Listed by Order Number (continued) Order No. Physical Cable Description Page 7123 44-pin to 15-pin X.21 cable adapter 8-5 7124 44-pin to 15-pin V.35 cable adapter 8-7 7125 9-pin D-sub plug to token ring/802.5 MAU data connector (no ferrite bead); STP cable 3-4 7126 9-pin D-sub plug to token ring/802.5 MAU data connector (with ferrite bead); STP cable 3-5 7128 9-pin D-sub plug to token ring/802.5 RJ-11 receptacle 3-6 7131 44-pin to 15-pin RS-422 cable adapter 8-9 7135 FDDI/X3T9.5 FSD to FSD; multimode fiber cable; dual attachment to FDDI ring requires two cables 3-7 7136 FDDI FSD to bayonet (ST) connectors; multimode fiber cable; dual attachment to FDDI ring requires two cables 3-7 7137 44-pin D-sub plug to V.35 plug (raise DTR for Series 7 software) 7-11 7138 44-pin D-sub plug to RS-232-C plug (raise DTR for Series 7 software) 7-13 7139 44-pin D-sub plug to RS-422 plug (raise DTR for Series 7 software) 7-14 7150 MCT1 clock cable (9-pin D-sub plug to 15-pin D-sub plug) 5-12 7151 MCT1 loopback plug (15-pin D-sub plug) 5-13 7152 MCT1 loopback plug (RJ-48) 5-14 7153 MCT1 crossover cable (15-pin D-sub plug to RJ-48) 5-15 7154 MCT1 loopback cable (RJ-48 to RJ-48) 5-16 7155 MCT1 loopback cable (15-pin D-sub plug to 15-pin D-sub plug) 5-17 7156 MCT1 straight-through cable (RJ-48 to RJ-48) 5-18 7157 MCT1 straight-through cable (15-pin D-sub plug to 15-pin D-sub plug) 5-19 7158 15-pin synchronous plug to V.35 plug 6-17 7159 44-pin D-sub plug to V.35 plug 6-18 7160 MCE1 crossover cable (9-pin) 5-20 7161 MCE1 straight-through cable (9-pin) 5-21 7162 MCE1 cable, 75-ohm coaxial 5-22 7163 FDDI SC duplex to SC duplex connectors; multimode fiber cable; dual attachment to 3-9 FDDI ring requires two cables (continued) 308604-14.10 Rev 01 1-5 Cable Guide Table 1-2. Cables Listed by Order Number (continued) Order No. Physical Cable Description Page 7164 FDDI SC duplex to bayonet (ST) connectors; single-mode fiber cable; dual attachment to FDDI ring requires two cables 3-8 7165 FDDI SC duplex to SC duplex connectors; single-mode fiber cable; dual attachment 3-9 to FDDI ring requires two cables 7167 MCE1 DB9 to DB15 straight-through cable 5-23 7168 MCE1 DB9 to DB15 crossover cable 5-24 7169 ATM cable, SC to ST MMF 3-10 7215 15-pin D-sub plug to V.35 plug (no DTR; for WAN connection) 6-20 7216 15-pin D-sub plug to V.35 plug (with DTR) 6-22 7218 RS-232 synchronous pass-through (15-pin synchronous plug to RS-232 plug; for DTE connection) 6-23 7219 V.35 synchronous pass-through (15-pin synchronous plug to V.35 plug; for DTE connection) 6-24 7220 44-pin D-sub plug to V.35 plug (leased line or V.25bis; for WAN connection) 6-26 7221 15-pin D-sub plug to X.21 plug (for WAN connection) 6-28 7224 44-pin D-sub plug to X.21 plug (for WAN connection) 6-29 7255 15-pin D-sub plug to RS-232-C plug (for WAN connection) 6-30 7256 15-pin D-sub plug to V.28 plug (for WAN connection) 6-31 7260 15-pin to 15-pin synchronous crossover (for back-to-back node operation) 6-32 7315 15-pin D-sub plug to RS-422 plug (for WAN connection) 6-34 7318 44-pin D-sub plug to RS-422 plug (leased line or V.25bis; for WAN connection) 6-36 7401 15-pin T1 framer plug (labeled DSX-1 or DSX-2) to 15-pin DTE plug (for CSU connection) 5-25 7415 15-pin T1 framer plug (labeled DSX-1 or DSX-2) to 15-pin customer premise equipment (CPE) plug 5-26 7525 25-pin D-sub plug to RS-232-C receptacle (for console interface to ASCII terminal connection) 2-3 7526 AFN/AN console cable; 9-pin D-sub plug to RS-232-C receptacle (for console interface to ASCII terminal connection) 2-4 7527 9-pin D-sub plug to RS-232-C receptacle (for console/modem connection to a console using a modem cable and a null-modem adapter) 2-5 7650 15-position CSU network receptacle to RJ-45 (for T-carrier line connection) 5-27 (continued) 1-6 308604-14.10 Rev 01 Cable Basics Table 1-2. Cables Listed by Order Number (continued) Order No. Physical Cable Description Page 7750 15-position CSU network receptacle to spade terminals (for T-carrier line connection) 5-28 7825 9-pin D-sub plug to RS-232-C modem plug (for console/modem interface to dial modem connection) 2-6 7826 44-pin D-sub plug to RS-232 plug (leased line or V.25bis; for WAN connection) 6-38 7830 HSSI DCE plug to DTE plug (10 ft) 4-3 7831 HSSI DCE plug to DTE plug (50 ft) 4-3 7832 HSSI crossover cable; HSSI plug to HSSI plug 4-5 7833 RS-232 synchronous pass-through (44-pin plug to RS-232 plug) 6-39 7834 V.35 synchronous pass-through (44-pin plug to V.35 plug) 6-40 7835 V.35 crossover cable (44-pin plug to 44-pin plug) 6-42 7836 V.35 crossover cable (44-pin plug to 15-pin plug) 6-44 7837 44-pin to V.28 plug (for WAN connection) 6-46 7932 50-pin to V.35 plug 6-48 7933 50-pin to V.35 with raise DTR 7-16 7934 50-pin to RS-232 6-50 7935 50-pin to RS-232-C with raise DTR 7-18 7936 50-pin to X.21 6-51 7937 50-pin to RS-422 6-52 7938 50-pin to 50-pin crossover 6-54 7939 50-pin to 15-pin crossover 6-56 7940 50-pin to 44-pin crossover 6-58 7941 15-pin to female RS-232-C synchronous pass-through 6-60 7942 15-pin to female V.35 synchronous pass-through 6-61 7943 44-pin to female RS-232-C synchronous pass-through 6-62 7944 44-pin to female V.35 synchronous pass-through 6-63 7945 50-pin to female RS-232-C synchronous pass-through 6-65 7946 50-pin to female V.35 synchronous pass-through 6-66 7947 50-pin to 44-pin cable adapter 8-11 (continued) 308604-14.10 Rev 01 1-7 Cable Guide Table 1-2. Cables Listed by Order Number (continued) Order No. Physical Cable Description Page 7948 50-pin to 15-pin V.35 cable adapter 8-14 77850 25-pin D-sub plug to RS-232-C modem plug (for BLN/BCN console/modem interface to dial modem connection) 2-7 Cable Connector Basics Before using this guide, you should be familiar with its terminology and the connector types Nortel Networks provides. Connector Terminology This guide uses several terms to describe generically the various types of connectors and their physical/electrical attributes. Table 1-3 lists these terms and their definitions. Table 1-3. Connector Terms Term Description Pins These are the short, rigid, lead wires protruding from a plug-type connector. The pins of a plug connector penetrate and make electrical contact with counterpart sockets, or holes, in a receptacle-type connector. Sockets These are the holes in a receptacle-type connector. Each hole: • Accepts one counterpart pin of a plug-type connector • Completes an electrical connection to its counterpart pin Plug This type of connector provides a number of pins and attaches to a receptacle-type connector. Receptacle This type of connector provides a number of sockets, or holes, that accept the pins of a plug-type connector. Physical interface This is a plug- or receptacle-type connector located on the router hardware platform or on a device such as an Ethernet transceiver. The physical interface accepts an appropriate (counterpart) cable connector. Termination This is the connector at one end of a cable; a termination can be either a plug- or receptacle-type connector. 1-8 308604-14.10 Rev 01 Cable Basics Connector Types Nortel Networks provides the following connector types: • Attachment unit interface (AUI): A 15-pin D-type connector that connects equipment to the Ethernet network through a transceiver • CCITT series (V.28, V.35): CCITT-recommended V.10 (unbalanced) and V.11 (balanced) standard connectors • Data terminal equipment (DTE) to data communication equipment (DCE) interface (X.21): CCITT-recommended DTE to DCE synchronous/public switched network connector • Fiber channel (FC): Threaded, straight-tip, coaxial or fiber optic connectors • Fixed shroud duplex (FSD): Jack-type, dual fiber optic connector for use in FDDI networks • Media access unit/multistation access unit (MAU): LAN wiring concentrator used in token ring networks • Recommended standard (RS-232-C, RS-449/RS-422): EIA standard connectors for use with DTE and DCE devices • Registered jack series (RJ-45; RJ-48): 8-position, FCC-registered data plugs • Subscriber connector (SC) duplex: Jack-type, dual fiber optic connector for use in FDDI networks • Spade terminals: Flat, U-shaped connectors typically used for T-carrier line connection • Straight-tip (ST): Bayonet coaxial or fiber optic connectors Note: Many types of fiber optic connectors include a dust cover. (Dust obstructs or attenuates optical signals entering or leaving the cable through the connector.) Be careful not to lose the dust cover when you attach a fiber optic cable connector to its counterpart connector. Replace dust covers when you detach a fiber optic cable from any local device. Figure 1-1 shows a sample of connectors in cable assemblies for Nortel Networks router hardware platforms. 308604-14.10 Rev 01 1-9 Cable Guide Token ring data connector Registered jack (RJ) Attachment Unit Interface (AUI) connector Recommended series (RS) connector Spade terminals CCITT series V.35 connector Fixed shroud duplex (FSD) connector Type SC duplex connector Straight tip bayonet connector (BNC) CAB0001A Figure 1-1. 1-10 Connector Types 308604-14.10 Rev 01 Cable Basics Building Your Own Cables Cables that you build must comply with standard cable specifications and network requirements. Cable length, cable type, cable and connector attenuation, and other factors affect the overall performance and reliability of your network. For example, using a cable length longer than that recommended in industry standards or interface specifications, or using a cable type that is unsuitable, considering the cable environment (temperature, electrical noise, radio-frequency [RF] emissions, and other factors) may degrade network performance and reliability. For additional information about maximum cable length and other factors, consult the appropriate EIA, IEEE, CCITT, or ISO specification, standard, or recommendation. Some examples include: • IEEE 802.3 10BASE-T Specification (10 Mb/s CSMA/CD over twisted pair) • IEEE 802.5 Specification (token ring) • X3T9.5 Single-Mode Fiber PMD Specification (FDDI) • EIA RS-449/RS-422A Standard • EIA RS-232-C Standard • CCITT V.10/V.11/V.28/V.35 Recommendations • CCITT X.21 Recommendation See also the manufacturer’s specifications for any cables or connectors you want to use. Specifications for attenuation per unit length of cable, and for connector insertion loss, are useful in helping you to determine the maximum amount of signal loss (and, therefore, the maximum distance) allowable between two directly connected network devices. The physical interface on each device (for example, the connector on an Ethernet link module in a Nortel Networks router hardware platform) determines which industry specification, standard, or recommendation you need to consult for guidelines on how to customize your cables. To assist you in determining which industry document you need to consult, the description for each cable in this guide includes an “Industry Interface Type” description. 308604-14.10 Rev 01 1-11 Chapter 2 Console/Modem Cables This chapter identifies the console/modem cables that link Nortel Networks router hardware platforms to DTE and DCE devices. Table 2-1 summarizes the cables. Detailed cable illustrations and pinouts follow. Table 2-1. Console/Modem Cables Order No. Length Physical Cable Description 7525 25 ft (7.63 m) 25-pin D-sub plug to RS-232-C receptacle Console/modem interface to any ASCII 2-3 terminal (for all devices except AFN®, AN®, Passport™ 2430, and Passport 5430 Fast Branch Router) 7526 25 ft (7.63 m) AFN/AN console cable; 9-pin D-sub plug to RS-232-C receptacle Console/modem interface to any ASCII terminal (for AFN and AN only) 2-4 7527 10 ft (3.05 m) AT serial console cable; 9-pin D-sub plug to RS-232-C modem plug Console/modem interface (kit contains a modem cable and a null-modem adapter) to a console 2-5 7825 25 ft (7.63 m) 9-pin D-sub plug to RS-232-C modem plug Console/modem interface to a dial modem 2-6 (for all devices except BLN®, BLN-2, and BCN®) 77850 15 ft (4.57 m) 25-pin D-sub plug to RS-232-C modem plug Console/modem interface to a dial modem 2-7 (for BLN, BLN-2, and BCN only) 9-pin D-sub plug to RJ-45 Console/modem interface to any PC (for Passport 2430 and Passport 5430 only) AA0011026 10 ft (3.05 m) Connection Page 2-8 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) 308604-14.10 Rev 01 2-1 Cable Guide The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for that interconnection requirement, you should: -- Identify in this chapter a cable that satisfies your interconnection requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). • Pinouts for each connector and all associated signals • Internal wire connections for each termination (when applicable) For example, the console port to ASCII terminal cable (Order No. 7525) lists internal wire connections such as “Pin 6 > 20” in the Remote Termination column. This indicates that you must connect pin 6 to pin 20 inside the remote termination. • 2-2 Grounding arrangements that isolate the chassis from the DC ground within the cable (when applicable) 308604-14.10 Rev 01 Console/Modem Cables Console Interface to ASCII Terminal (Order No. 7525) Caution: Do not use this cable to attach a modem to any Nortel Networks router hardware platform. Use this cable only to attach an ASCII terminal to any Nortel Networks router hardware platform except a model AN or AFN. 25 ft (7.63 m) Pin 1 P Pin 13 Pin 13 Pin 1 Pin 14 Pin 25 Pin 25 Pin 14 25-position D-sub plug with screw locks (ground shield connected to backshell) 25-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0054A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Data 2 3 Receive Data Receive Data 3 2 Transmit Data Request to Send 4 5 Clear to Send Clear to Send 5 4 Request to Send Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 6 > 20 308604-14.10 Rev 01 2-3 Cable Guide AFN/AN Console Interface to ASCII Terminal (Order No. 7526) Caution: Do not use this cable to attach a modem to any Nortel Networks router hardware platform. Use this cable only to attach an ASCII terminal to a Nortel Networks model AN or AFN platform. 25 ft (7.63 m) Pin 1 Pin 9 Pin 13 Pin 1 Pin 25 Pin 14 9-position D-sub plug with screw locks (ground shield connected to backshell) 25-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0055A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Data 2 3 Receive Data Receive Data 3 2 Transmit Data Request to Send 4 5 Clear to Send Clear to Send 5 4 Request to Send Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 6 > 8 > 20 2-4 308604-14.10 Rev 01 Console/Modem Cables AT Serial Console (Order No. 7527) 10 ft (3.05 m) Pin 5 Pin 1 Pin 9 Pin 6 9-position D-sub receptacle with screw locks (ground shield connected to backshell) Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0056A Industry Interface Type: RS-232-C Nortel Networks Termination Modem Termination Signal Pin # to Pin # Signal Data Carrier Detect 1 8 Data Carrier Detect Transmit Data (TXD) 2 2 Transmit Data (TXD) Receive Data (RXD) 3 3 Receive Data (RXD) Data Set Ready 4 6 Data Set Ready Data Terminal Ready 6 20 Data Terminal Ready Clear to Send 7 5 Clear to Send Request to Send 8 4 Request to Send 308604-14.10 Rev 01 2-5 Cable Guide Console/Modem Interface to RS-232-C Modem (Order No. 7825) Caution: This is a modem cable. Do not use this cable to attach an ASCII terminal to a Nortel Networks router hardware platform. Use this cable to attach a modem to any Nortel Networks router hardware platform except a model BLN®, BLN-2, or BCN®. 25 ft (7.63 m) Pin 1 Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0060A Industry Interface Type: RS-232-C Nortel Networks Termination 2-6 Modem Termination Signal Pin # to Pin # Signal Transmit Data 2 2 Transmit Data Receive Data 3 3 Receive Data Request to Send 4 4 Request to Send Clear to Send 5 5 Clear to Send Data Set Ready 6 6 Data Set Ready Signal Ground 7 7 Signal Ground Carrier Detect 8 8 Carrier Detect Data Terminal Ready 9 20 Data Terminal Ready 308604-14.10 Rev 01 Console/Modem Cables Backbone Console Interface to RS-232-C Modem (Order No. 77850) Caution: This is a modem cable. Do not use this cable to attach an ASCII terminal to a Nortel Networks router hardware platform. Use this cable only to attach a modem to a Nortel Networks model BLN, BLN-2, or BCN platform. 15 ft (4.57 m) Pin 1 Pin 13 Pin 1 Pin 13 Pin 14 Pin 25 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0061A Industry Interface Type: RS-232-C Nortel Networks Termination Modem Termination Signal Pin # to Pin # Signal Chassis Ground 1 1 Chassis Ground Transmit Data 2 2 Transmit Data Receive Data 3 3 Receive Data Request to Send 4 4 Request to Send Clear to Send 5 5 Clear to Send Data Set Ready 6 6 Data Set Ready Signal Ground 7 7 Signal Ground Data Carrier Detect 8 8 Data Carrier Detect Data Terminal Ready 20 20 Data Terminal Ready 308604-14.10 Rev 01 2-7 Cable Guide Passport 2430 and Passport 5430 Fast Branch Router Console Interface to PC (Order No. AA0011026) Caution: Do not use this cable to attach a modem to any Nortel Networks router hardware platform. Use this cable only to attach a PC to a Nortel Networks model Passport 2430 or Passport 5430 Fast Branch Router platform. 10 ft (3.05 m) Pin 8 Pin 1 RJ-45 connector Pin 5 Pin 1 Pin 9 Pin 6 9-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0110A Industry Interface Type: RS-232-D Nortel Networks Termination 2-8 Remote Termination Signal Pin # to Pin # Signal Clear to Send 1 8 Clear to Send Data Set Ready 2 6 Data Set Ready Receive Data 3 3 Send Data Data Carrier Detect 4 1 Data Carrier Detect Send Data 5 2 Receive Data Signal Ground 6 5 Signal Ground Data Terminal Ready 7 4 Data Terminal Ready Request to Send 8 7 Request to Send 308604-14.10 Rev 01 Chapter 3 LAN Cables This chapter identifies the local area network (LAN) cables that link Nortel Networks router hardware platforms to other LAN devices. Table 3-1 summarizes the cables. Detailed cable illustrations and pinouts follow. Table 3-1. Local Area Network Cables Order No. Length Physical Cable Description Connection Page 7115 15 ft (4.57 m) 15-pin AUI plug to 15-position AUI receptacle Nortel Networks Ethernet/802.3 XCVR interface to an Ethernet AUI network connection 3-3 7125 15 ft (4.57 m) 9-pin D-sub plug to token ring/ 802.5 MAU data connector; STP cable Nortel Networks token ring/802.5 MAU interface to a token ring network connection 3-4 7126 15 ft (4.57 m) 9-pin D-sub plug to token ring/ 802.5 MAU data connector with ferrite bead; STP cable Nortel Networks token ring/802.5 MAU interface to a token ring network connection 3-5 7128 1 ft (0.3 m) 9-pin D-sub plug to RJ-11 receptacle Nortel Networks token ring/802.5 MAU interface to a token ring network connection 3-6 7135 32.81 ft (10 m) FSD to FSD connectors; dual Nortel Networks PHY A or PHY B attachment to FDDI ring requires interface to an FDDI FSD network two cables connection 3-7 7136 32.81 ft (10 m) FSD to ST connectors; dual Nortel Networks PHY A or PHY B attachment to FDDI ring requires interface to a bayonet-type FDDI two cables network connection 3-7 (continued) 308604-14.10 Rev 01 3-1 Cable Guide Table 3-1. Local Area Network Cables (continued) Order No. Length Physical Cable Description Connection Page 7164 9 ft (2.7 m) FDDI SC duplex to bayonet (ST) connectors; single-mode fiber cable; dual attachment to FDDI ring requires two cables Nortel Networks PHY A or PHY B interface to a type ST FDDI network connection 3-8 7163 9 ft (2.7 m) FDDI SC duplex to SC duplex connectors; multimode fiber cable; dual attachment to FDDI ring requires two cables Nortel Networks PHY A or PHY B 3-9 interface to a type SC FDDI network connection 7165 9 ft (2.7 m) FDDI SC duplex to SC duplex connectors; single-mode fiber cable; dual attachment to FDDI ring requires two cables Nortel Networks PHY A or PHY B 3-9 interface to a type SC FDDI network connection 7169 9 ft (2.7 m) ATM SC duplex to bayonet (ST) connectors; multimode fiber cable; dual attachment to FDDI ring requires two cables Nortel Networks PHY A or PHY B interface to a type ST FDDI network connection 3-10 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for that interconnection requirement, you should: -- Identify in this chapter a cable that satisfies your interconnection requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). 3-2 • Pinouts for each connector and all associated signals (except for the FDDI cables, which have no wire connections) • Grounding arrangements that isolate the chassis of an attached device from the DC ground within the cable (when applicable) 308604-14.10 Rev 01 LAN Cables Ethernet Cable (Order No. 7115) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0002A Industry Interface Type: Ethernet/802.3 Nortel Networks Termination Transceiver Termination Signal Pin # to Pin # Signal Collision + 2 2 Collision + (802.3 Circuit CI-A) Transmit + 3 3 Transmit + (802.3 Circuit DO-A) Receive + 5 5 Receive + (802.3 Circuit DI-A) Voltage Common 6 6 Voltage Common (802.3 Circuit VC) Collision - 9 9 Collision (802.3 Circuit CI-B) Transmit - 10 10 Transmit (802.3 Circuit DO-B) Receive - 12 12 Receive (802.3 Circuit DI-B) +12 V 13 13 +12 V (802.3 Circuit VP) 308604-14.10 Rev 01 3-3 Cable Guide Token Ring MAU Cable (Order No. 7125) 15 ft (4.57 m) Pin 1 Pin 9 Red 9-position D-sub plug with screw locks (ground shield connected to backshell) Green Black Orange Data connector CAB0012A Industry Interface Type: Token Ring/802.5 Nortel Networks Termination 3-4 Token Ring MAU Signal Pin # Contact (by Wire Color) Receive A 1 Red Transmit A 5 Black Receive B 6 Green Transmit B 9 Orange 308604-14.10 Rev 01 LAN Cables Token Ring MAU Cable with Ferrite Bead (Order No. 7126) 15 ft (4.57 m) Pin 1 Ferrite Bead (Fair-ite Part# 0443167251 or equivalent) Red Pin 9 Green 9-position D-sub plug with screw locks (ground shield connected to backshell) Black Orange Data connector CAB0013A Industry Interface Type: Token Ring/802.5 Nortel Networks Termination Token Ring MAU Signal Pin # Contact (by Wire Color) Receive A 1 Red Transmit A 5 Black Receive B 6 Green Transmit B 9 Orange 308604-14.10 Rev 01 3-5 Cable Guide Token Ring to RJ-11 Cable (Order No. 7128) 12 in. (0.3 m) Pin 1 Pin 8 Pin 1 Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) RJ-11 compatible socket CAB0014A Industry Interface Type: Token Ring/802.5 Nortel Networks Termination 3-6 RJ-11 Receptacle Signal Pin # to Pin # Signal Receive A 1 4 Receive Data + Transmit A 5 3 Transmit Data + Receive B 6 5 Receive Data - Transmit B 9 6 Transmit Data - 308604-14.10 Rev 01 LAN Cables FDDI FSD to FSD (Order No. 7135) 32.81 ft (10 m) Fixed shroud duplex connector Fixed shroud duplex connector CAB0016A Industry Interface Type: X3T9.5 PMD/FDDI FDDI FSD to Straight Tip (Order No. 7136) 32.81 ft (10 m) Fixed shroud duplex connector 2.5-mm bayonet connector (two places) CAB0017A Industry Interface Type: X3T9.5 PMD/FDDI 308604-14.10 Rev 01 3-7 Cable Guide FDDI-Type SC Duplex to Straight Tip (Order No. 7164 for Single-Mode Cable) 9 ft (2.7 m) 2.5-mm bayonet connector (two places) CAB0036A Industry Interface Type: X3T9.5 PMD/FDDI 3-8 308604-14.10 Rev 01 LAN Cables FDDI-Type SC Duplex to SC Duplex (Order No. 7163 for Multimode Cable) (Order No. 7165 for Single-Mode Cable) 9 ft (2.7 m) CAB0035A Industry Interface Type: X3T9.5 PMD/FDDI 308604-14.10 Rev 01 3-9 Cable Guide ATM Cable, SC to Straight Tip MMF (Order No. 7169) 9 ft (2.7 m) 2.5-mm bayonet connector (two places) CAB0038A Industry Interface Type: X3T9.5 PMD/FDDI 3-10 308604-14.10 Rev 01 Chapter 4 HSSI Cables This chapter identifies the High Speed Serial Interface (HSSI) cables that link Nortel Networks router hardware platforms to LAN and WAN devices. Table 4-1 summarizes the cables. Detailed cable illustrations and pinouts follow. Table 4-1. HSSI Cables Order No. Length Physical Cable Description Page 7830 10 ft (3.05 m) HSSI DCE plug to DTE plug 4-3 7831 50 ft (15.24 m) HSSI DCE plug to DTE plug 4-3 7832 20 ft (6.10 m) HSSI crossover; HSSI plug to HSSI plug (This cable is intended for test environments only.) 4-5 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) 308604-14.10 Rev 01 4-1 Cable Guide The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build your own cables, and you want to determine the maximum cable length appropriate for each of your interconnection requirements, you should: -- Identify in this chapter a cable that satisfies your wiring requirement (with the exception of total cable length). -- Consult the HSSI specification for cable length data. 4-2 • Pinouts for each connector and all associated signals • Grounding arrangements that isolate the chassis from the DC ground within the cable 308604-14.10 Rev 01 HSSI Cables HSSI DCE to DTE (10 Ft: Order No. 7830; 50 Ft: Order No. 7831) 10 or 50 ft (3.05 or 15.24 m) Pin 1 Pin 25 Pin 1 Pin 25 Pin 26 Pin 50 Pin 26 Pin 50 50-position high-density plug (ground shield connected to internal shell) 50-position high-density plug (ground shield connected to internal shell) CAB0063A Industry Interface Type: High-Speed Serial Interface (HSSI) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 1 Signal Ground Signal Ground 26 26 Signal Ground Receive Timing + 2 2 Receive Timing + Receive Timing - 27 27 Receive Timing - DCE Available + 3 3 DCE Available + DCE Available - 28 28 DCE Available - Received Data + 4 4 Received Data + Received Data - 29 29 Received Data - Send Timing + 6 6 Send Timing + Send Timing - 31 31 Send Timing - Signal Ground 7 7 Signal Ground Signal Ground 32 32 Signal Ground DTE Available + 8 8 DTE Available + (continued) 308604-14.10 Rev 01 4-3 Cable Guide Nortel Networks Termination 4-4 Remote Termination Signal Pin # to Pin # Signal DTE Available - 33 33 DTE Available - Terminal Timing + 9 9 Terminal Timing + Terminal Timing - 34 34 Terminal Timing - Loopback CKT A + 10 10 Loopback CKT A + Loopback CKT A - 35 35 Loopback CKT A - Send Data + 11 11 Send Data + Send Data - 36 36 Send Data - Loopback CKT B + 12 12 Loopback CKT B + Loopback CKT B - 37 37 Loopback CKT B - Signal Ground 13 13 Signal Ground Signal Ground 38 38 Signal Ground Signal 14 14 Signal Signal Ground 19 19 Signal Ground Signal Ground 44 44 Signal Ground Signal Ground 25 25 Signal Ground Signal Ground 50 50 Signal Ground 308604-14.10 Rev 01 HSSI Cables HSSI Crossover (Order No. 7832) 20 ft (6.10 m) Pin 1 Pin 25 Pin 1 Pin 25 Pin 26 Pin 50 Pin 26 Pin 50 50-position high-density plug (ground shield connected to internal shell) 50-position high-density plug (ground shield connected to internal shell) CAB0064A Industry Interface Type: High-Speed Serial Interface (HSSI) This cable is intended solely for test environments; you cannot use it in production applications.Within such test environments, this cable provides a proprietary, nonstandard, back-to-back connection of Nortel Networks router hardware platforms (through their HSSI ports) without intervening digital service unit (DSU) equipment. When using the Nortel Networks HSSI crossover cable, you must set the HSSI interfaces to clock internally. The data rate under internal clocking conditions must not exceed 25 megabits per second (Mb/s). (HSSI operation in a production environment allows for a DSU configuration from 300 Kb/s to 52 Mb/s.) For additional information about enabling internal clocking, refer to Using Technician Interface Software (router software) or Administration Guide (BayStream™ software). 308604-14.10 Rev 01 4-5 Cable Guide Nortel Networks Termination A 4-6 Nortel Networks Termination B Signal Pin # to Pin # Signal Signal Ground 1 1 Signal Ground Signal Ground 26 26 Signal Ground Receive Timing + 2 9 Terminal Timing + Receive Timing - 27 34 Terminal Timing - DCE Available + 3 8 DTE Available + DCE Available - 28 33 DTE Available - Receive Data + 4 11 Send Data + Receive Data - 29 36 Send Data - Signal Ground 7 7 Signal Ground Signal Ground 32 32 Signal Ground DTE Available + 8 3 DCE Available + DTE Available - 33 28 DCE Available - Terminal Timing + 9 2 Receive Timing + Terminal Timing - 34 27 Receive Timing - Send Data + 11 4 Receive Data + Send Data - 36 29 Receive Data - Signal Ground 13 13 Signal Ground Signal Ground 38 38 Signal Ground Signal Ground 19 19 Signal Ground Signal Ground 44 44 Signal Ground Signal Ground 25 25 Signal Ground Signal Ground 50 50 Signal Ground 308604-14.10 Rev 01 E1/T1 Cables Chapter 5 E1/T1 Cables This chapter identifies the cables that interconnect a T1 framer or MCT1 link module with a channel service unit (CSU) or T1 digital signal cross-connect switch (DSX-1 or DSX-2), an E1/T1 line, or an external T1 clock source. Table 5-1 summarizes the cables. Detailed cable illustrations and pinout specifications follow. Table 5-1. Order No. E1/T1 Cables Length Physical Cable Description Page AA0018001 10 ft (3.05 m) MCE1 DB9 to mod jack cable; 9-pin to RJ-45 5-4 AA0018002 10 ft (3.05 m) MCE1 DB9 to unterminated end cable; 9-pin to unterminated end 5-5 AA0018006 6 in (0.15 m) Quad MCT1 clock cable (15-pin D-sub plug and 9-position D-sub receptacle to 15-pin D-sub receptacle) 5-6 AA0018014 10 ft (3.05 m) MCE1 RJ-45 to RJ-45 cable 5-7 AA0018015 10 ft (3.05 m) MCE1 RJ-45 to unterminated end cable 5-8 AA0018021 15 ft (4.57 m) Quad MCT1 crossover cable (15-pin D-sub plug to 15-pin D-sub plug) 5-9 AA0018022 15 ft (4.57 m) Quad MCT1 straight-through cable (15-pin D-sub plug to 15-pin D-sub plug) 5-10 AA0018040 1 ft (.30 m) ATM E1 RJ-45 to RJ-45 cable (for use with the AA0018040 Balun, described in Chapter 8) 5-11 7150 15 ft (4.57 m) MCT1 clock cable; 9-pin D-sub plug to 15-pin D-sub plug 5-12 7151 N/A MCT1 loopback connector; 15-pin D-sub plug 5-13 7152 N/A MCT1 loopback connector, RJ-48 5-14 7153 15 ft (4.57 m) MCT1 crossover cable; 15-pin D-sub plug to RJ-48 5-15 (continued) 308604-14.10 Rev 01 5-1 Cable Guide Table 5-1. E1/T1 Cables (continued) Order No. Length Physical Cable Description Page 7154 15 ft (4.57 m) MCT1 loopback cable; RJ-48 to RJ-48 5-16 7155 15 ft (4.57 m) MCT1 loopback cable; 15-pin D-sub plug to 15-pin D-sub plug 5-17 7156 15 ft (4.57 m) MCT1 straight-through cable; RJ-48 to RJ-48 5-18 7157 15 ft (4.57 m) MCT1 straight-through cable; 15-pin D-sub plug to 15-pin D-sub plug 5-19 7160 10 ft (3.05 m) MCE1 DB9 to DB9 crossover cable 5-20 7161 10 ft (3.05 m) MCE1 DB9 to DB9 straight-through cable 5-21 7162 10 ft (3.05 m) MCE1 coaxial cable, 75-ohm coaxial 5-22 7167 10 ft (3.05 m) MCE1 DB9 to DB15 straight-through cable 5-23 7168 10 ft (3.05 m) MCE1 DB9 to DB15 crossover cable 5-24 7401 1 ft (0.3 m) 15-pin T1 framer plug (labeled DSX-1 or DSX-2) to 15-pin DTE plug (for CSU connection) 5-25 7415 15 ft (4.57 m) 15-pin T1 framer plug (labeled DSX-1 or DSX-2) to 15-pin external customer premise equipment (CPE) plug 5-26 7650 50 ft (15.24 m) 15-position CSU network receptacle to RJ-45 (for T-carrier line 5-27 connection) 7750 50 ft (15.24 m) 15-position CSU network receptacle to spade terminals (for T-carrier line connection) 5-28 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) 5-2 308604-14.10 Rev 01 E1/T1 Cables The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for each of your interconnection requirements, you should: -- Identify in this chapter a cable that satisfies your wiring requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). • Pinouts for each connector and all associated signals • Grounding arrangements that isolate the chassis from the DC ground within the cable 308604-14.10 Rev 01 5-3 Cable Guide MCE1 DB9 to Mod Jack Cable (Order No. AA0018001) Note: This cable assembly uses a 120-ohm wire. 10 ft (3.05 m) Pin 1 Pin 8 Pin 1 RJ-45 connector Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0087A Industry Interface Type: E1 Nortel Networks Termination 5-4 Remote Termination Signal Pin # to Pin # Signal Receive Tip 1 1 Receive Tip Receive Ring 6 2 Receive Ring Transmit Tip 5 4 Transmit Tip Transmit Ring 9 5 Transmit Ring Ground 3 3 Ground 308604-14.10 Rev 01 E1/T1 Cables MCE1 DB9 to Unterminated Cable (Order No. AA0018002) Note: This cable assembly uses a 120-ohm wire. 10 ft (3.05 m) Pin 1 Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) Unterminated cable CAB0088A Industry Interface Type: E1 Nortel Networks Termination Remote Termination Signal Pin # to Wire Color Signal Receive Tip 1 White/ Blue Receive Tip Receive Ring 6 Blue/ White Receive Ring Transmit Tip 5 White/ Orange Transmit Tip Transmit Ring 9 Orange/ White Transmit Ring Ground 3 Bare Ground 308604-14.10 Rev 01 5-5 Cable Guide Quad MCT1 Clock Cable (Order No. AA0018006) Note: You can use this cable assembly with COM 1 ports only. 6 in. (0.15 m) 1 Pin 1 Bay Networks termination 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 5 Pin 8 Pin 1 Pin 15 Pin 15 Pin 9 Pin 8 Pin 9 3 2 Remote termination 15-position D-sub receptacle with screw locks (ground shield connected to backshell) Pin 9 Pin 1 Pin 6 External T1 timing source 9-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0092A Industry Interface Type: T1/DS1 with External Clock (Input from an External T1 Timing Source) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Tip 1-1 2-1 Transmit Tip Transmit Ring 1-9 2-9 Transmit Ring Receive Tip 1-3 2-3 Receive Tip Receive Ring 1-11 2-11 Receive Ring EXT Tip 1-7 3-2 EXT Tip EXT Ring 1-15 3-3 EXT Ring Ground 1-2 1-4 Ground* Ground 2-2 2-4 Ground* * You must configure onboard jumpers to complete this connection. Refer to the table called “QMCT1 Link Module Settings” in Installing T1 Link Modules in BN Platforms. 5-6 308604-14.10 Rev 01 E1/T1 Cables MCE1 RJ-45 to RJ-45 Cable (Order No. AA0018014) Note: This cable assembly uses a 120-ohm wire. 10 ft (3.05 m) Pin 8 Pin 8 Pin 1 RJ-45 connector Pin 1 RJ-45 connector CAB0026C Industry Interface Type: E1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive Tip 1 1 Receive Tip Receive Ring 2 2 Receive Ring Transmit Tip 4 4 Transmit Tip Transmit Ring 5 5 Transmit Ring 308604-14.10 Rev 01 5-7 Cable Guide MCE1 RJ-45 to Unterminated Cable (Order No. AA0018015) Note: This cable assembly uses a 120-ohm wire. 10 ft (3.05 m) Pin 1 Pin 8 Unterminated cable RJ-45 connector CAB0097A Industry Interface Type: E1 Nortel Networks Termination 5-8 Signal Pin # Signal Receive Tip 1 Receive Tip Receive Ring 2 Receive Ring Transmit Tip 4 Transmit Tip Transmit Ring 5 Transmit Ring 308604-14.10 Rev 01 E1/T1 Cables Quad MCT1 15-Pin to 15-Pin Crossover Cable (Order No. AA0018021) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0098A Industry Interface Type: T1/DS1 Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal Transmit Tip 1 3 Receive Tip Transmit Ring 9 11 Receive Ring Receive Tip 3 1 Transmit Tip Receive Ring 11 9 Transmit Ring Ground 2 4 Ground* Ground 2 4 Ground* * You must configure onboard jumpers to complete this connection. Refer to the table called “QMCT1 Link Module Settings” in Installing T1 Link Modules in BN Platforms. 308604-14.10 Rev 01 5-9 Cable Guide Quad MCT1 15-Pin to 15-Pin Straight-Through Cable (Order No. AA0018022) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0099A Industry Interface Type: T1/DS1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Tip 1 1 Transmit Tip Transmit Ring 9 9 Transmit Ring Receive Tip 3 3 Receive Tip Receive Ring 11 11 Receive Ring Ground 2 4 Ground* Ground 2 4 Ground* * You must configure onboard jumpers to complete this connection. Refer to the table called “QMCT1 Link Module Settings” in Installing T1 Link Modules in BN Platforms. 5-10 308604-14.10 Rev 01 E1/T1 Cables ATM E1 RJ-45 to RJ-45 Cable (Order No. AA0018040) Note: This cable assembly uses a 120-ohm wire, and is used with the AA0018040 Balun described in Chapter 8. 12 in (0.3 m) Pin 8 Pin 8 Pin 1 RJ-45 connector Pin 1 RJ-45 connector CAB0111A Industry Interface Type: E1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive Ring 1 4 Receive Ring Receive Tip 2 5 Receive Tip Transmit Ring 4 1 Transmit Ring Transmit Tip 5 2 Transmit Tip 308604-14.10 Rev 01 5-11 Cable Guide MCT1 Clock Cable (Order No. 7150) 15 ft (4.57 m) Pin 1 Pin 9 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0022A Industry Interface Type: T1/DS1 External Clock (Input from an External T1 Timing Source) Nortel Networks Termination 5-12 Remote Termination Signal Pin # to Pin # Signal Receive Tip 2 1 Transmit Tip Receive Ring 3 9 Transmit Ring 308604-14.10 Rev 01 E1/T1 Cables MCT1 15-Pin Loopback Connector (Order No. 7151) Pin 1 15-position connect CAB0023A Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Tip 1 3 Receive Tip Transmit Ring 9 11 Receive Ring 308604-14.10 Rev 01 5-13 Cable Guide MCT1 RJ-48 Loopback Connector (Order No. 7152) Pin 1 RJ-48 connector CAB0024A Nortel Networks Termination 5-14 Remote Termination Signal Pin # to Pin # Signal Receive Ring 1 4 Transmit Ring Receive Tip 2 5 Transmit Tip 308604-14.10 Rev 01 E1/T1 Cables MCT1 Crossover Cable (Order No. 7153) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 Pin 8 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 1 RJ-48 connector CAB0025A Industry Interface Type: T1/DS1 Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal Transmit Tip 1 2 Receive Tip Receive Tip 3 5 Transmit Tip Transmit Ring 9 1 Receive Ring Receive Ring 11 4 Transmit Ring 308604-14.10 Rev 01 5-15 Cable Guide MCT1 Loopback Cable (Order No. 7154) 15 ft (4.57 m) Pin 8 Pin 8 Pin 1 RJ-48 connector Pin 1 RJ-48 connector CAB0026A Industry Interface Type: T1/DS1 Nortel Networks Termination 5-16 Remote Termination Signal Pin # to Pin # Signal Receive Ring 1 4 Transmit Ring Receive Tip 2 5 Transmit Tip Transmit Ring 4 1 Receive Ring Transmit Tip 5 2 Receive Tip 308604-14.10 Rev 01 E1/T1 Cables MCT1 Loopback Cable (Order No. 7155) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0027A Industry Interface Type: T1/DS1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Tip 1 3 Receive Tip Receive Tip 3 1 Transmit Tip Transmit Ring 9 11 Receive Ring Receive Ring 11 9 Transmit Ring 308604-14.10 Rev 01 5-17 Cable Guide MCT1 Straight-Through Cable (Order No. 7156) 15 ft (4.57 m) Pin 8 Pin 8 Pin 1 RJ-48 connector Pin 1 RJ-48 connector CAB0028A Industry Interface Type: T1/DS1 Nortel Networks Termination 5-18 Remote Termination Signal Pin # to Pin # Signal Receive Tip 1 1 Receive Tip Receive Ring 2 2 Receive Ring Transmit Tip 4 4 Transmit Tip Transmit Ring 5 5 Transmit Ring 308604-14.10 Rev 01 E1/T1 Cables MCT1 Straight-Through Cable (Order No. 7157) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0105A Industry Interface Type: T1/DS1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Tip 1 1 Transmit Tip Transmit Ring 9 9 Transmit Ring Receive Tip 3 3 Receive Tip Receive Ring 11 11 Receive Ring 308604-14.10 Rev 01 5-19 Cable Guide MCE1 Crossover Cable (Order No. 7160) 10 ft (3.05 m) Pin 1 Pin 1 Pin 9 Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0033A Industry Interface Type: E1/G.703 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive A (RXA) 1 5 Transmit A (TXA) Receive B (RXB) 6 9 Transmit B (TXB) Transmit A (TXA) 5 1 Receive A (RXA) Transmit B (TXB) 9 6 Receive B (RXB) Internal Wire Connections Pin 3 (Shield) 5-20 Pin 3 (Shield grounded to backshell) 308604-14.10 Rev 01 E1/T1 Cables MCE1 Straight-Through Cable (Order No. 7161) 10 ft (3.05 m) Pin 1 Pin 1 Pin 9 Pin 9 9-position D-sub plug with screw locks (ground shield connected to backshell) 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0033A Industry Interface Type: E1/G.703 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive A (RXA) 1 1 Receive A (RXA) Receive B (RXB) 6 6 Receive B (RXB) Transmit A (TXA) 5 5 Transmit A (TXA) Transmit B (TXB) 9 9 Transmit B (TXB) Internal Wire Connections Pin 3 (Shield) 308604-14.10 Rev 01 Pin 3 (Shield grounded to backshell) 5-21 Cable Guide MCE1 Coaxial Cable (Order No. 7162) 10 ft (3.05 m) Twist-lock coaxial connector Twist-lock coaxial connector CAB0034A Industry Interface Type: E1/G.703 5-22 308604-14.10 Rev 01 E1/T1 Cables MCE1 DB9 to DB15 Straight-Through Cable (Order No. 7167) Note: This cable provides a direct connection to a 15-pin D-sub port. 10 ft (3.05 m) Pin 1 Pin 9 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0095B Industry Interface Type: E1/G.703 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive A 1 3 Receive A Receive B 6 11 Receive B Transmit A 5 1 Transmit A Transmit B 9 9 Transmit B Internal Wire Connections Pin 3 > Shield 308604-14.10 Rev 01 5-23 Cable Guide MCE1 DB9 to DB15 Crossover Cable (Order No. 7168) Note: This cable provides a crossover connection to a 15-pin D-sub port. 10 ft (3.05 m) Pin 1 Pin 9 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 9-position D-sub plug with screw locks (ground shield connected to backshell) CAB0096B Industry Interface Type: E1/G.703 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive A 1 1 Transmit A Receive B 6 9 Transmit B Transmit A 5 3 Receive A Transmit B 9 11 Receive B Internal Wire Connections Pin 3 > Shield 5-24 308604-14.10 Rev 01 E1/T1 Cables T1 to CSU DTE (Order No. 7401) 12 in. (0.3 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0052A Industry Interface Type: T1/DS1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send + 1 1 Send + Send - 9 9 Send - Receive + 3 3 Receive + Receive - 11 11 Receive - 308604-14.10 Rev 01 5-25 Cable Guide T1 to Customer Premise Equipment (Order No. 7415) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0053A Industry Interface Type: T1/DS1 Nortel Networks Termination 5-26 Remote Termination Signal Pin # to Pin # Signal Send + 1 1 Send + Send - 9 9 Send - Receive + 3 3 Receive + Receive - 11 11 Receive - 308604-14.10 Rev 01 E1/T1 Cables CSU Network Receptacle to RJ-45 (Order No. 7650) 50 ft (15.24 m) Pin 8 Pin 1 Pin 15 Pin 9 Pin 1 Pin 8 15-position D-sub receptacle with slide latch connected to backshell RJ-45 connector CAB0057A Industry Interface Type: T1/DS1 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send + 1 5 Send + Send - 9 4 Send - Receive + 3 2 Receive + Receive - 11 1 Receive - 308604-14.10 Rev 01 5-27 Cable Guide CSU Network Receptacle to Spade Terminals (Order No. 7750) 50 ft (15.24 m) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell Spade terminals CAB0058A Industry Interface Type: T1/DS1 Nortel Networks Termination 5-28 Remote Termination Signal Pin # to Signal Wire Signal Send + 1 wire XMIT + Send - 9 wire XMIT - Receive + 3 wire Receive + Receive - 11 wire Receive - Ground Chassis wire Shield Ground Chassis wire Shield 308604-14.10 Rev 01 Chapter 6 Standard Synchronous Cables This chapter identifies the standard synchronous cables that link Nortel Networks router software platforms to WAN devices. Table 6-1 summarizes the cables. Detailed cable illustrations and pinout specifications follow. Table 6-1. Order No. Standard Synchronous Cables Length Physical Cable Description Page AA0018003 15 ft (4.57 m) X.21 synchronous pass-through (15-pin D-sub plug to X.21 receptacle) 6-4 AA0018004 15 ft (4.57 m) X.21 synchronous pass-through (44-pin D-sub plug to X.21 receptacle) 6-6 AA0018005 15 ft (4.57 m) X.21 synchronous pass-through (50-pin plug to X.21 receptacle) 6-8 AA0018011 15 ft (4.57 m) RS-530 straight-through cable (15-pin to RS-530 plug) 6-10 AA0018012 15 ft (4.57 m) RS-530 straight-through cable (44-pin to RS-530 plug) 6-12 AA0018013 15 ft (4.57 m) RS-530 straight-through cable (50-pin to RS-530 plug) 6-14 AA0018023 15 ft (4.57 m) 50-pin to V.28 cable 6-16 7158 10 ft (3.05 m) 15-pin to male V.35 plug 6-17 7159 10 ft (3.05 m) 44-pin to male V.35 plug 6-18 7215 15 ft (4.57 m) 15-pin D-sub plug to V.35 plug (no DTR; for WAN connection) 6-20 7216 15 ft (4.57 m) 15-pin D-sub plug to V.35 plug (with DTR) 6-22 7218 15 ft (4.57 m) RS-232 synchronous pass-through (15-pin D-sub plug to RS-232 plug) 6-23 (continued) 308604-14.10 Rev 01 6-1 Cable Guide Table 6-1. Standard Synchronous Cables (continued) Order No. Length Physical Cable Description Page 7219 15 ft (4.57 m) V.35 synchronous pass-through (15-pin D-sub plug to V.35 plug) 6-24 7220 15 ft (4.57 m) 44-pin D-sub plug to V.35 plug (leased line or V.25bis; for WAN 6-26 connection) 7221 15 ft (4.57 m) 15-pin D-sub plug to X.21 plug (for WAN connection) 6-28 7224 15 ft (4.57 m) 44-pin D-sub plug to X.21 plug (for WAN connection) 6-29 7255 15 ft (4.57 m) 15-pin D-sub plug to RS-232 plug (for WAN connection) 6-30 7256 15 ft (4.57 m) 15-pin D-sub plug to V.28 plug (for WAN connection) 6-31 7260 15 ft (4.57 m) 15-pin to 15-pin synchronous crossover (for back-to-back node operation) 6-32 7315 15 ft (4.57 m) 15-pin D-sub plug to RS-422 plug (for WAN connection) 6-34 7318 15 ft (4.57 m) 44-pin D-sub plug to RS-422 plug (leased line or V.25bis; for WAN connection) 6-36 7826 15 ft (4.57 m) 44-pin D-sub plug to RS-232 plug (leased line or V.25bis; for WAN connection) 6-38 7833 15 ft (4.57 m) RS-232 synchronous pass-through (44-pin D-sub plug to RS-232 plug) 6-39 7834 15 ft (4.57 m) V.35 synchronous pass-through (44-pin D-sub plug to V.35 plug) 6-40 7835 15 ft (4.57 m) Nortel Networks V.35 crossover (44-pin D-sub plug to 44-pin D-sub plug) 6-42 7836 15 ft (4.57 m) V.35 crossover (44-pin D-sub plug to 15-pin D-sub plug) 6-44 7837 15 ft (4.57 m) 44-pin D-sub plug to V.28 plug (for WAN connection) 6-46 7932 15 ft (4.57 m) 50-pin to V.35 plug 6-48 7934 15 ft (4.57 m) 50-pin to RS-232 6-50 7936 15 ft (4.57 m) 50-pin to X.21 6-51 7937 15 ft (4.57 m) 50-pin to RS-422 6-52 7938 15 ft (4.57 m) 50-pin to 50-pin crossover 6-54 7939 15 ft (4.57 m) 50-pin to 15-pin crossover 6-56 7940 15 ft (4.57 m) 50-pin to 44-pin crossover 6-58 7941 15 ft (4.57 m) 15-pin to female RS-232 synchronous pass-through 6-60 7942 15 ft (4.57 m) 15-pin to female V.35 synchronous pass-through 6-61 (continued) 6-2 308604-14.10 Rev 01 Standard Synchronous Cables Table 6-1. Standard Synchronous Cables (continued) Order No. Length Physical Cable Description Page 7943 15 ft (4.57 m) 44-pin to female RS-232 synchronous pass-through 6-62 7944 15 ft (4.57 m) 44-pin to female V.35 synchronous pass-through 6-63 7945 15 ft (4.57 m) 50-pin to female RS-232 synchronous pass-through 6-65 7946 15 ft (4.57 m) 50-pin to female V.35 synchronous pass-through 6-66 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the preface.) The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for each of your interconnection requirements, you should: -- Identify in this chapter a cable that satisfies your wiring requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). • Pinouts for each connector and all associated signals • Wire jumper identification for each connector (when applicable) For example, the Sync to V.35 cable (Order No. 7215) lists internal wire connections (Pin 1 > 7) in the Nortel Networks Termination column. This indicates that you must connect pin 1 to pin 7 inside the Nortel Networks connector. • 308604-14.10 Rev 01 Grounding arrangements that isolate the chassis from the DC ground within the cable 6-3 Cable Guide 15-Pin to F X.21 Synchronous Pass-Through (Order No. AA0018003) 15 ft (4.57 m) Pin 1 Pin 8 Pin 8 Pin 1 Pin 9 Pin 15 Pin 15 Pin 9 15-position D-sub receptacle with M-3 screw posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0089A Industry Interface Type: X.21 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Transmit Data + 2 4 Receive Data A Transmit Data - 3 11 Receive Data B Timing + 4 6 Timing A Timing - 5 13 Timing B Request to Send + 6 5 Indication A Data Carrier Detect - 9 10 Control B Data Carrier Detect + 10 3 Control A Receive Data - 13 9 Transmitted Data B Receive Data + 14 2 Transmitted Data A Request to Send - 15 12 Indication B Frame Ground 1 1 Frame Ground (continued) 6-4 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Internal Wire Connections Pin 6 > 7 (X A) Pin 13 > 14 (X B) Note: You must move Jumpers A-E to the X.21 (2-3) position to support this interface. 308604-14.10 Rev 01 6-5 Cable Guide 44-Pin F X.21 Synchronous Pass-Through (Order No. AA0018004) Note: This cable provides you with a female termination as a DCE device. 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with M-3 screw posts (ground shield connected to backshell) CAB0090A Industry Interface Type: X.21 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 4 Receive Data A Send Data - 16 11 Receive Data B Receive Data + 3 2 Transmitted Data A Receive Data - 17 9 Transmitted Data B Request to Send + 4 5 Indication A Request to Send - 18 12 Indication B (continued) 6-6 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Data Carrier Detect + 9 3 Control A Data Carrier Detect - 23 10 Control B Transmitter Timing + 12 6 Timing A Transmitter Timing - 26 13 Timing B Frame Ground 1 1 Frame Ground Signal Ground 7 8 Signal Ground Internal Wire Connections Pin 12 > 10 (ST+) Pin 6 > 7 (X A) Pin 26 > 24 (ST-) Pin 13 > 14 (X B) Pin 14 > 15 Pin 28 > 30 Pin 41 > 43 308604-14.10 Rev 01 6-7 Cable Guide 50-Pin to F X.21 Synchronous Pass-Through (Order No. AA0018005) Note: This cable provides you with a female termination as a DCE device. 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with M-3 screw posts (ground shield connected to backshell) 50-position 0.8-mm plug (ground shield connected to internal shell) CAB0091A Industry Interface Type: X.21 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 4 Receive Data A Send Data - 27 11 Receive Data B Receive Data + 3 2 Transmitted Data A Receive Data - 28 9 Transmitted Data B Request to Send + 4 5 Indication A Request to Send - 29 12 Indication B Data Carrier Detect + 9 3 Control A Data Carrier Detect - 34 10 Control B (continued) 6-8 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Transmitter Timing + 12 6 Timing A Transmitter Timing - 37 13 Timing B Frame Ground 1 1 Frame Ground Signal Ground 7 8 Signal Ground Internal Wire Connections Pin 12 > 10 (ST+) Pin 6 > 7 (X A) Pin 37 > 35 (ST-) Pin 13 > 14 (X B) Pin 14 > 15 Pin 38 > 40 Pin 46 > 48 308604-14.10 Rev 01 6-9 Cable Guide 15-Pin to RS-530 Straight-Through (Order No. AA0018011) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0093A Industry Interface Type: RS-530 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 2 Transmitted Data A Send Data - 3 14 Transmitted Data B Receive Data + 14 3 Receive Data A Receive Data - 13 16 Receive Data B Request to Send + 6 4 Request to Send A Request to Send - 15 19 Request to Send B Clear to Send + 8 5 Clear to Send A Clear to Send - 7 13 Clear to Send B Data Carrier Detect + 10 8 Receive Line Signal Detect A Data Carrier Detect - 9 10 Receive Line Signal Detect B (continued) 6-10 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Send Timing + 4 15 Transmitter Signal Element Timing (DCE) A Send Timing - 5 12 Transmitter Signal Element Timing (DCE) B Receive Timing + 12 17 Receiver Signal Element Timing (DCE) A Receive Timing - 11 9 Receiver Signal Element Timing (DCE) B Signal Ground 1 7 Signal Ground Note: You must move jumpers B and C to the X.21 (2-3) position to support this interface. 308604-14.10 Rev 01 6-11 Cable Guide 44-Pin to RS-530 Straight-Through (Order No. AA0018012) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0094A Industry Interface Type: RS-530 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 2 Transmitted Data A Send Data - 16 14 Transmitted Data B Receive Data + 3 3 Receive Data A Receive Data - 17 16 Receive Data B Request to Send + 4 4 Request to Send A Request to Send - 18 19 Request to Send B Clear to Send + 5 5 Clear to Send A Clear to Send - 19 13 Clear to Send B Data Set Ready + 6 6 DCE Ready A Data Set Ready - 20 22 DCE Ready B Data Terminal Ready + 8 20 DTE Ready A Data Terminal Ready - 22 23 DTE Ready B Data Carrier Detect + 9 8 Receive Line Signal Detect A Data Carrier Detect - 23 10 Receive Line Signal Detect B Send Timing + 10 15 Transmitter Signal Element Timing (DCE) A (continued) 6-12 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Send Timing - 24 12 Transmitter Signal Element Timing (DCE) B Signal Pin # to Pin # Signal Receive Timing + 11 17 Receiver Signal Element Timing (DCE) A Receive Timing - 25 9 Receiver Signal Element Timing (DCE) B Transmitter Timing + 12 24 Transmitter Signal Element Timing (DTE) A Transmitter Timing - 26 11 Transmitter Signal Element Timing (DTE) B Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 13 > 28 Pin 14 > 29 Pin 41 > 43 308604-14.10 Rev 01 6-13 Cable Guide 50-Pin to RS-530 Straight-Through (Order No. AA0018013) 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 13 Pin 26 Pin 50 Pin 14 Pin 25 50-position 0.8-mm plug (ground shield connected to internal shell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0095A Industry Interface Type: RS-530 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 2 Transmitted Data A Send Data - 27 14 Transmitted Data B Receive Data + 3 3 Receive Data A Receive Data - 28 16 Receive Data B Request to Send + 4 4 Request to Send A Request to Send - 29 19 Request to Send B Clear to Send + 5 5 Clear to Send A Clear to Send - 30 13 Clear to Send B Data Set Ready + 6 6 DCE Ready A Data Set Ready - 31 22 DCE Ready B Data Terminal Ready + 8 20 DTE Ready A Data Terminal Ready - 33 23 DTE Ready B Data Carrier Detect + 9 8 Receive Line Signal Detect A Data Carrier Detect - 34 10 Receive Line Signal Detect B Send Timing + 10 15 Transmitter Signal Element Timing (DCE) A (continued) 6-14 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Send Timing - 35 12 Transmitter Signal Element Timing (DCE) B Signal Pin # to Pin # Signal Receive Timing + 11 17 Receiver Signal Element Timing (DCE) A Receive Timing - 36 9 Receiver Signal Element Timing (DCE) B Transmitter Timing + 12 24 Transmitter Signal Element Timing (DTE) A Transmitter Timing - 37 11 Transmitter Signal Element Timing (DTE) B Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 13 > 38 Pin 14 > 39 Pin 46 > 48 308604-14.10 Rev 01 6-15 Cable Guide 50-Pin to V.28 Cable (Order No. AA0018023) 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 13 Pin 26 Pin 50 Pin 14 Pin 25 50-position 0.8-mm plug (ground shield connected to internal shell) 25-position D-sub plug with M-3 jack screws (ground shield connected to backshell) CAB0103A Industry Interface Type: V.28 (V.10) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send + 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Signal Ground 7 7 Signal Ground Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 8 Data Carrier Detect Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Terminal Timing + 12 24 Terminal Timing Internal Wire Connections Pin 7 > 30 > 31 Pin 13 > 38 Pin 14 > 39 6-16 308604-14.10 Rev 01 Standard Synchronous Cables 15-Pin to V.35M (Order No. 7158) 10 ft (3.05 m) Pin 1 Pin 8 Pin 9 A C H B D F R T V X Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0030A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Send Data + 2 P Send Data (Signal A) Send Data - 3 S Send Data (Signal B) Serial Clock Transmit + 4 Y Serial Clock Transmit (Signal A) Serial Clock Transmit - 5 AA Serial Clock Transmit (Signal B) Request to Send + 6 C Request to Send Clear to Send + 8 D Clear to Send Data Carrier Detect + 10 F Data Carrier Detect Serial Clock Receive - 11 X Serial Clock Receive (Signal B) Serial Clock Receive + 12 V Serial Clock Receive (Signal A) Receive Data - 13 T Receive Data (Signal B) Receive Data + 14 R Receive Data (Signal A) Internal Wire Connections Pin 1 > 7 308604-14.10 Rev 01 Pin C > H 6-17 Cable Guide 44-Pin to V.35M (Order No. 7159) 10 ft (3.05 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) A C E H P S U W Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) B D F R T V X CAB0031B Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 A Frame Ground Request to Send + 4 C Request to Send Clear to Send + 5 D Clear to Send Data Set Ready + 6 E Data Set Ready Data Terminal Ready + 8 H Data Terminal Ready Data Carrier Detect + 9 F Data Carrier Detect VTT + 40 U Terminal Timing A VTT - 39 W Terminal Timing B Signal Ground 19 B Signal Ground VST + 32 Y Send Timing A VST - 31 AA Send Timing B VRT + 34 V Receive Timing A VRT - 33 X Receive Timing B (continued) 6-18 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VRD + 37 R Receive Data A VRD - 35 T Receive Data B VSD + 38 P Send Data A VSD - 36 S Send Data B Internal Wire Connections Pin 7 > 19 > 20 Pin 41 > 42 > 43 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-19 Cable Guide 15-Pin D-Sub to V.35: No DTR, for WAN (Order No. 7215) 15 ft (4.57 m) Pin 1 A E Pin 8 Pin 9 B D F R T V X Pin 15 C H P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0039A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Send Data + 2 P Send Data A Send Data - 3 S Send Data B Serial Clock Transmit + 4 Y Serial Clock Transmit A Serial Clock Transmit - 5 AA Serial Clock Transmit B Request to Send + 6 C Request to Send Clear to Send + 8 D Clear to Send Data Carrier Detect + 10 F Data Carrier Detect Serial Clock Receive - 11 X Serial Clock Receive B Serial Clock Receive + 12 V Serial Clock Receive A Receive Data - 13 T Receive Data B Receive Data + 14 R Receive Data A (continued) 6-20 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Data Set Ready + Remote Termination 15 E Data Set Ready Internal Wire Connections Pin 1 > 7 308604-14.10 Rev 01 6-21 Cable Guide 15-Pin D-Sub to V.35 with DTR (Order No. 7216) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 A C B D F R T V X Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) H P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0040A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Send Data + 2 P Send Data A Send Data - 3 S Send Data B Serial Clock Transmit + 4 Y Serial Clock Transmit A Serial Clock Transmit - 5 AA Serial Clock Transmit B Request to Send + 6 C Request to Send Clear to Send ++ 8 D Clear to Send Data Carrier Detect + 10 F Data Carrier Detect Serial Clock Receive - 11 X Serial Clock Receive B Serial Clock Receive + 12 V Serial Clock Receive A Receive Data - 13 T Receive Data B Receive Data + 14 R Receive Data A Internal Wire Connections Pin 1 > 7 6-22 Pin C > H 308604-14.10 Rev 01 Standard Synchronous Cables RS-232 Pass-Through: 15-Pin to RS-232 (Order No. 7218) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 Pin 1 Pin 13 Pin 25 Pin 14 25-position D-sub plug with screw locks (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0041A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 7 Signal Ground Transmitted Data 2 3 Received Data Transmit Clock 4 15 Transmit Clock Data Set Ready 6 8 Data Carrier Detect Data Carrier Detect 10 4 Clear to Send Receive Clock 12 17 Receive Clock Received Data 14 2 Transmitted Data Internal Wire Connections Pin 1 > 7 Pin 4 > 5 Pin 6 > 8 Pin 6 > 20 Pin 3 > 4 >12 308604-14.10 Rev 01 6-23 Cable Guide V.35 Pass-Through: 15-Pin to V.35 (Order No. 7219) 15 ft (4.57 m) Pin 1 A C E Pin 8 Pin 9 B D F R T V X Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) H P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0042A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Transmit Data + 2 R Receive Data A Transmit Data - 3 T Receive Data B Serial Clock Transmit + 4 Y Serial Clock Transmit A Serial Clock Transmit - 5 AA Serial Clock Transmit B Request to Send 6 F Data Carrier Detect Data Carrier Detect 10 D Clear to Send Serial Clock Receive - 11 X Serial Clock Receive B Serial Clock Receive + 12 V Serial Clock Receive A Receive Data - 13 S Transmit Data B Receive Data + 14 P Transmit Data A (continued) 6-24 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Internal Wire Connections Pin 6 > 8 Pin C > D Pin 4 > 12 Pin E > H Pin 5 > 11 Pin 1 > 7 308604-14.10 Rev 01 6-25 Cable Guide 44-Pin D-Sub to V.35: Leased Line or V.25bis (Order No. 7220) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 A C E H P S U W AA B D F R T V X Y 44-position D-sub plug with screw locks (ground shield connected to backshell) 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0106A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 38 P Send Data A VSD - 36 S Send Data B VRT + 34 V Receive Timing A VRT - 33 X Receive Timing B VST + 32 Y Send Timing A VST - 31 AA Send Timing B VRD + 37 R Receive Data A VRD - 35 T Receive Data B Data Set Ready + 6 E Data Set Ready Data Terminal Ready + 8 H Data Terminal Ready Request to Send + 4 C Request to Send Clear to Send + 5 D Clear to Send (continued) 6-26 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VTT + 40 U Terminal Timing A VTT - 39 W Terminal Timing B Frame Ground 1 A Frame Ground Data Carrier Detect + 9 F Data Carrier Detect Signal Ground 19 B Signal Ground Internal Wire Connections Pin 7 > 19 > 20 Pin 41 > 42 > 43 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-27 Cable Guide 15-Pin D-Sub to X.21 (Order No. 7221) 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with M-3 jack screws (ground shield connected to backshell) CAB0044A Industry Interface Type: X.21 (V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Ground 1 1 Ground Send Data + 2 2 Transmitted Data A Send Data - 3 9 Transmitted Data B Request to Send + 6 3 Control A Request to Send - 15 10 Control B Receive Data + 14 4 Receive Data A Receive Data - 13 11 Receive Data B Data Carrier Detect + 10 5 Indication A Data Carrier Detect - 9 12 Indication B Send Timing + 4 6 Timing A Send Timing - 5 13 Timing B Note: You must move Jumpers A-E to the X.21 (2-3) position to support this interface. 6-28 308604-14.10 Rev 01 Standard Synchronous Cables 44-Pin D-Sub to X.21 (Order No. 7224) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with M-3 jack screws (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0104A Industry Interface Type: X.21 (V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 2 Transmitted Data A Send Data - 16 9 Transmitted Data B Request to Send + 4 3 Control A Request to Send - 18 10 Control B Receive Data + 3 4 Receive Data A Receive Data - 17 11 Receive Data B Data Carrier Detect + 9 5 Indication A Data Carrier Detect - 23 12 Indication B Send Timing + 10 6 Timing A Send Timing - 24 13 Timing B Signal Ground 7 8 Signal Ground Frame Ground 1 1 Frame Ground Internal Wire Connections Pin 14 > 15 Pin 28 > 30 Pin 41 > 43 308604-14.10 Rev 01 6-29 Cable Guide 15-Pin D-Sub to RS-232 (Order No. 7255) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 Pin 1 Pin 13 Pin 25 Pin 14 15-position D-sub plug with locking posts (ground shield connected to backshell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0045A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 7 Signal Ground Transmitted Data 2 2 Transmitted Data Transmitter Signal Element Timing 3 (DTE Source) 24 Transmitter Signal Element Timing (DTE Source) Transmitter Signal Element Timing (DCE Source) 4 15 Transmitter Signal Element Timing (DCE Source) Request to Send 6 4 Request to Send Clear to Send 8 5 Clear to Send Carrier Detect 10 8 Carrier Detect Receiver Signal Element Timing (DCE Source) 12 17 Receiver Signal Element Timing (DCE Source) Received Data 14 3 Received Data Data Set Ready 15 6 Data Set Ready Internal Wire Connections Pin 1 > 7 6-30 Pin 4 > 20 308604-14.10 Rev 01 Standard Synchronous Cables 15-Pin D-Sub to V.28 (Order No. 7256) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with M-3 jack screws (ground shield connected to backshell) CAB0045B Industry Interface Type: V.28 (V.10) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 7 Signal Ground Transmitted Data 2 2 Transmitted Data Transmitter Timing (DTE Source) 3 24 Transmitter Signal Element Timing (DTE Source) Transmitter Signal Element Timing 4 (DCE Source) 15 Transmitter Signal Element Timing (DCE Source) Request to Send 6 4 Request to Send Clear to Send 8 5 Clear to Send Carrier Detect 10 8 Carrier Detect Receiver Signal Element Timing (DCE Source) 12 17 Receiver Signal Element Timing (DCE Source) Received Data 14 3 Received Data Data Set Ready 15 6 Data Set Ready Internal Wire Connections Pin 1 > 7 308604-14.10 Rev 01 Pin 4 > 20 6-31 Cable Guide 15-Pin Crossover (Order No. 7260) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 1 Pin 8 Pin 1 Pin 8 Pin 9 Pin 15 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0049A Industry Interface Type: V.35 Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal Signal Ground 1 15 Return Common Send Data + 2 14 Receive Data + Send Data - 3 13 Receive Data - Serial Clock Transmit + 4 12 Serial Clock Receive + Serial Clock Transmit - 5 11 Serial Clock Receive - Request to Send + 6 10 Data Carrier Detect + Data Carrier Detect + 10 6 Request to Send + Serial Clock Receive - 11 5 Serial Clock Transmit- Serial Clock Receive + 12 4 Serial Clock Transmit + (continued) 6-32 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Receive Data - 13 3 Send Data - Receive Data + 14 2 Send Data + Return Common 15 1 Signal Ground Internal Wire Connections Pin 6 > 8 Pin 6 > 8 Pin 7 > 9 > 15 Pin 7 > 9 > 15 308604-14.10 Rev 01 6-33 Cable Guide 15-Pin D-Sub to RS-422 (Order No. 7315) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 1 Pin 19 Pin 15 Pin 20 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 37 37-position D-sub plug with screw locks (ground shield connected to backshell) CAB0050A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 25 Send Common Send Data + 2 4 Send Data A Send Data - 3 22 Send Data B Serial Clock Transmit + 4 5 Send Timing A Serial Clock Transmit - 5 23 Send Timing B Request to Send 6 12 Terminal Ready A Clear to Send - 7 27 Clear to Send B Clear to Send + 8 9 Clear to Send A Data Carrier Detect - 9 31 Data Carrier Detect B Data Carrier Detect + 10 13 Data Carrier Detect A Serial Clock Receive - 11 26 Receive Timing B Serial Clock Receive + 12 8 Receive Timing A Receive Data - 13 24 Receive Data B Receive Data + 14 6 Receive Data A (continued) 6-34 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Internal Wire Connections Pin 7 > 12 Pin 25 > 30 > 37 Note: You must move jumpers B and C to the X.21 (2-3) position to support this interface. 308604-14.10 Rev 01 6-35 Cable Guide 44-Pin D-Sub to RS-422: Leased Line or V.25bis (Order No. 7318) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 19 Pin 20 Pin 37 37-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0051A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Data Carrier Detect - 23 31 Receiver Ready B Data Carrier Detect + 9 13 Receiver Ready A Send Data + 2 4 Send Data A Send Data - 16 22 Send Data B Receive Timing + 11 8 Receive Timing A Receive Timing - 25 26 Receive Timing B Send Timing + 10 5 Send Timing A Send Timing - 24 23 Send Timing B Receive Data + 3 6 Receive Data A Receive Data - 17 24 Receive Data B Clear to Send - 19 27 Clear to Send B Clear to Send + 5 9 Clear to Send A (continued) 6-36 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Request to Send + 4 7 Request to Send A Request to Send - 18 25 Request to Send B Data Set Ready + 6 11 DM A Data Set Ready - 20 29 DM B Terminal Ready + 8 12 Terminal Ready A Terminal Ready - 22 30 Terminal Ready B Terminal Timing + 12 17 Terminal Timing A Terminal Timing - 26 35 Terminal Timing B Send Common 44 37 Send Common Signal Ground 41 19 Signal Ground Internal Wire Connections Pin 41 > 43 Pin 20 > 37 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-37 Cable Guide 44-Pin D-Sub to RS-232: Leased Line or V.25bis (Order No. 7826) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0069A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send+ 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 8 Data Carrier Detect Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Transmitter Signal Element Timing + 12 24 Transmitter Signal Element Timing Signal Ground 7 Signal Ground 7 Internal Wire Connections Pin 7 > 19 > 20 Pin 13 > 28 Pin 14 > 29 6-38 308604-14.10 Rev 01 Standard Synchronous Cables RS-232 Pass-Through: 44-Pin to RS-232 (Order No. 7833) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 13 Pin 14 Pin 25 44-position D-sub plug with screw locks (ground shield connected to backshell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0065A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Receive Data + 3 2 Send Data Send Data + 2 3 Receive Data Data Carrier Detect + 9 5 Clear to Send RTS + 4 8 Data Carrier Detect Send Timing + 10 17 Receive Timing Frame Ground 1 1 Frame Ground Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 4 > 5 Pin 4 > 5 Pin 10 > 11 > 12 Pin 15 > 17 Pin 7 > 19 > 20 Pin 6 > 20 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-39 Cable Guide V.35 Pass-Through: 44-Pin to V.35 (Order No. 7834) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 A C E H P S U W AA B D F R T V X Y 44-position D-sub plug with screw locks (ground shield connected to backshell) 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0106A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 38 R Receive Data A VSD - 36 T Receive Data B VRD + 37 P Send Data A VRD - 35 S Send Data B Request to Send + 4 F Data Carrier Detect Data Carrier Detect + 9 D Clear to Send VTT + 40 V Receive Timing A VTT - 39 X Receive Timing B Frame Ground 1 A Frame Ground Signal Ground 7 B Signal Ground (continued) 6-40 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Internal Wire Connections Pin 4 > 5 Pin C > D Pin 32 > 34 > 40 Pin V > Y Pin 31 > 33 > 39 Pin X > AA Pin 7 > 19 > 20 > 41 > 42 Pin E > H Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-41 Cable Guide V.35 Crossover: 44-Pin to 44-Pin (Order No. 7835) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 1 Pin 15 Pin 1 Pin 15 Pin 16 Pin 30 Pin 16 Pin 30 Pin 31 Pin 44 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0067A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal VSD + 38 37 VRD + VSD - 36 35 VRD - VRD + 37 38 VSD + VRD - 35 36 VSD - RTS + 4 9 DCD + DCD + 9 4 RTS + VRT + 34 40 VTT + VTT + 40 34 VRT + VRT - 33 39 VTT - VTT - 39 33 VRT - Signal Ground 7 7 Signal Ground (continued) 6-42 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Internal Wire Connections Pin 4 > 5 (CTS +) Pin 4 > 5 (CTS +) Pin 32 (VST +) > 40 (VTT +) Pin 32 (VST +) > 40 (VTT +) Pin 31 (VST -) > 39 (VTT -) Pin 31 (VST -) > 39 (VTT -) Pin 7 > 19 > 20 > 23 Pin 7 > 19 > 20 > 23 Pin 13 > 28 Pin 13 > 28 Pin 14 > 29 Pin 14 > 29 Pin 41 > 42 > 43 Pin 41 > 42 > 43 308604-14.10 Rev 01 6-43 Cable Guide V.35 Crossover: 44-Pin to 15-Pin (Order No. 7836) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0068A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal VSD + 38 14 Receive Data A VSD - 36 13 Receive Data B VRT + 34 4 SCT A VRT - 33 5 SCT B VTT + 40 12 SCR A VTT - 39 11 SCR B VRD + 37 2 Send Data A VRD - 35 3 Send Data B (continued) 6-44 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Request to Send + 4 10 Data Carrier Detect A Data Carrier Detect + 9 8 Clear to Send A Signal Ground 7 1 Signal Ground Internal Wire Connections Pin 32 > 40 Pin 6 > 8 Pin 31 > 39 Pin 1 > 7 > 9 > 15 Pin 4 > 5 Pin 7 > 19 > 20 > 23 Pin 13 > 28 Pin 14 > 29 Pin 41 > 42 > 43 308604-14.10 Rev 01 6-45 Cable Guide 44-Pin D-Sub to V.28 (Order No. 7837) 15 ft (4.57 m) in 1 Pin 15 in 16 Pin 30 in 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with M-3 jack screws (ground shield connected to backshell) CAB0069B Industry Interface Type: V.28 (V.10) 6-46 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send + 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 8 Data Carrier Detect Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Transmitter Signal Element Timing + 12 24 Transmitter Signal Element Timing Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 7 > 19 > 20 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 6-47 Cable Guide 50-Pin to V.35 (Order No. 7932) 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 A C E H P S U W AA B D F R T V X Y 50-position 0.8-mm plug (ground shield connected to internal shell) 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0070A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 44 P Send Data A VSD - 19 S Send Data B VRT + 42 V Receive Timing A VRT - 17 X Receive Timing B VST + 41 Y Send Timing A VST - 16 AA Send Timing B VRD + 43 R Receive Data A VRD - 18 T Receive Data B Data Set Ready + 6 E Data Set Ready Data Terminal Ready + 8 H Data Terminal Ready Request to Send + 4 C Request to Send Clear to Send + 5 D Clear to Send VTT + 45 U Terminal Timing A VTT - 20 W Terminal Timing B (continued) 6-48 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Frame Ground 1 A Frame Ground Data Carrier Detect 9 F Data Carrier Detect Signal Ground 30 B Signal Ground Internal Wire Connections Pin 7 > 30 > 31 Pin 46 > 47 > 48 Pin 13 > 38 Pin 14 > 39 308604-14.10 Rev 01 6-49 Cable Guide 50-Pin to RS-232 (Order No. 7934) 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 13 Pin 26 Pin 50 Pin 14 Pin 25 50-position 0.8-mm plug (ground shield connected to internal shell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0073A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send + 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Signal Ground 7 7 Signal Ground Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 8 Data Carrier Detect Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Terminal Timing + 12 24 Terminal Timing Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 7 > 30 > 31 Pin 13 > 38 Pin 14 > 39 6-50 308604-14.10 Rev 01 Standard Synchronous Cables 50-Pin to X.21 (Order No. 7936) 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 Pin 1 Pin 8 Pin 9 Pin 15 50-position 0.8-mm plug (ground shield connected to internal shell) 15-position D-sub plug with M-3 jack screws (ground shield connected to backshell) CAB0074A Industry Interface Type: X.21 (V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 2 Transmitted Data A Send Data - 27 9 Transmitted Data B Request to Send + 4 3 Control A Request to Send - 29 10 Control B Receive Data + 3 4 Receive Data A Receive Data - 28 11 Receive Data B Data Carrier Detect + 9 5 Indication A Data Carrier Detect - 34 12 Indication B Timing + 10 6 Timing A Timing - 35 13 Timing B Frame Ground 1 1 Frame Ground Signal Ground 7 8 Signal Ground Internal Wire Connections Pin 46 > 48 (GRD) Pin 38 > 40 Pin 14 > 15 308604-14.10 Rev 01 6-51 Cable Guide 50-Pin to RS-422 (Order No. 7937) 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 26 Pin 50 Pin 20 50-position 0.8-mm plug (ground shield connected to internal shell) Pin 19 Pin 37 37-position D-sub plug with screw locks (ground shield connected to backshell) CAB0075A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Data Carrier Detect - 34 31 Receiver Ready B Data Carrier Detect + 9 13 Receiver Ready A Send Data + 2 4 Send Data A Send Data - 27 22 Send Data B Receive Timing + 11 8 Receive Timing A Receive Timing - 36 26 Receive Timing B Send Timing + 10 5 Send Timing A Send Timing - 35 23 Send Timing B Receive Data + 3 6 Receive Data A Receive Data - 28 24 Receive Data B Clear to Send - 30 27 Clear to Send B Clear to Send + 5 9 Clear to Send A Request to Send + 4 7 Request to Send A Request to Send - 29 25 Request to Send B Data Set Ready + 6 11 Data Mode A Data Set Ready - 31 29 Data Mode B (continued) 6-52 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Terminal Ready + 8 12 Terminal Ready A Terminal Ready - 33 30 Terminal Ready B Terminal Timing + 12 17 Terminal Timing A Terminal Timing - 37 35 Terminal Timing B Send Common 49 37 Send Common Signal Ground 48 19 Signal Ground Internal Wire Connections Pin 46 (UNBE) > 48 (SGRD) Pin 20 > 37 Pin 13 > 38 Pin 14 > 39 308604-14.10 Rev 01 6-53 Cable Guide 50-Pin to 50-Pin Crossover (Order No. 7938) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 25 Pin 26 Pin 50 Pin 26 Pin 50 50-position 0.8-mm plug (ground shield connected to internal shell) 50-position 0.8-mm plug (ground shield connected to internal shell) CAB0076A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal VSD + 44 43 VRD + VSD - 19 18 VRD - VRD + 43 44 VSD + VRD - 18 19 VSD - Request to Send + 4 9 Data Carrier Detect + Data Carrier Detect + 9 4 Request to Send + VRT + 42 45 VTT + VTT + 45 42 VRT + VRT - 17 20 VTT - VTT - 20 17 VRT - Signal Ground 7 7 Signal Ground (continued) 6-54 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Internal Wire Connections Pin 4 > 5 (CTS +) Pin 4 > 5 (CTS +) Pin 41 (VST +) > 45 (VTT +) Pin 41 (VST +) > 45 (VTT +) Pin 16 (VST -) > 20 (VTT -) Pin 16 (VST -) > 20 (VTT -) Pin 7 > 30 > 31 > 34 Pin 7 > 30 > 31 > 34 Pin 13 > 38 Pin 13 > 38 Pin 14 > 39 Pin 14 > 39 Pin 46 > 47 > 48 Pin 46 > 47 > 48 308604-14.10 Rev 01 6-55 Cable Guide 50-Pin to 15-Pin Crossover (Order No. 7939) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) 50-position 0.8-mm plug (ground shield connected to internal shell) CAB0077A Industry Interface Type: V.35 (V10 and V.11) Nortel Networks Termination A Nortel Networks Termination B Signal Pin # to Pin # Signal VSD + 44 14 Receive Data + VSD - 19 13 Receive Data - VRD + 43 2 Send Data + VRD - 18 3 Send Data - Request to Send + 4 10 Data Carrier Detect + Data Carrier Detect + 9 6 Request to Send + VRT + 42 4 SCT + VTT + 45 12 SCR + VRT - 17 5 SCT - VTT - 20 11 SCR - Signal Ground 7 1 Signal Ground (continued) 6-56 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Internal Wire Connections Pin 4 > 5 (CTS +) Pin 6 > 8 (CTS +) Pin 41 (VST +) > 45 (VTT +) Pin 1 > 7 > 9 >15 Pin 16 (VST -) > 20 (VTT -) Pin 7 > 30 > 31 > 34 Pin 13 > 38 Pin 14 > 39 Pin 46 > 47 > 48 308604-14.10 Rev 01 6-57 Cable Guide 50-Pin to 44-Pin Crossover (Order No. 7940) Note: This crossover cable interconnects two Nortel Networks router software platforms. 15 ft (4.57 m) Pin 25 Pin 1 Pin 50 Pin 26 Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 50-position 0.8-mm plug (ground shield connected to internal shell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0078A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination A Signal Nortel Networks Termination B Pin # to Pin # Signal VSD + 44 37 VRD + VSD - 19 35 VRD - VRD + 43 38 VSD + VRD - 18 36 VSD - Request to Send + 4 9 Data Carrier Detect + Data Carrier Detect + 9 4 Request to Send + VRT + 42 40 VTT + VTT + 45 34 VRT + VRT - 17 39 VTT - VTT - 20 33 VRT - Signal Ground 7 7 Signal Ground (continued) 6-58 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination A Nortel Networks Termination B Internal Wire Connections Pin 4 > 5 (CTS +) Pin 4 > 5 (CTS +) Pin 41 (VST +) > 45 (VTT +) Pin 32 (VST +) > 40 (VTT +) Pin 16 (VST -) > 20 (VTT -) Pin 31 (VST -) > 39 (VTT -) Pin 7 > 30 > 31 > 34 Pin 7 > 19 > 20 > 23 Pin 13 > 38 Pin 13 > 28 Pin 14 > 39 Pin 14 > 29 Pin 46 > 47 > 48 Pin 41 > 42 > 43 308604-14.10 Rev 01 6-59 Cable Guide 15-Pin to F RS-232 Synchronous Pass-Through (Order No. 7941) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 13 Pin 1 Pin 25 Pin 14 25-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0079A Industry Interface Type: RS-232-C Nortel Networks Termination Signal Remote Termination Pin # to Pin # Signal Transmit Data 2 3 Receive Data Receive Data 14 2 Transmit Data Request to Send 6 8 Data Carrier Detect Data Carrier Detect 10 4 Request to Send Transmit Clock 4 15 Transmit Clock Signal Ground 1 7 Signal Ground Internal Wire Connections 6-60 Pin 6 > 8 Pin 4 > 5 Pin 3 > 4 > 12 Pin 15 > 17 Pin 1 > 7 Pin 6 > 20 308604-14.10 Rev 01 Standard Synchronous Cables 15-Pin to F V.35 Synchronous Pass-Through (Order No. 7942) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 A C E H P S U W Y AA 15-position D-sub plug with locking posts (ground shield connected to backshell) B D F R T V X 34-position V.35 receptacle with screw jack retainers (ground shield connected to backshell) CAB0080A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Signal Remote Termination Pin # to Pin # Signal Transmit Data + 2 R Receive Data A Transmit Data - 3 T Receive Data B Receive Data + 14 P Transmit Data A Receive Data - 13 S Transmit Data B Request to Send+ 6 F Data Carrier Detect Data Carrier Detect + 10 D Clear to Send SCT + 4 Y SCT A SCT - 5 AA SCT B Signal Ground 1 B Signal Ground Internal Wire Connections Pin 1 > 7 Pin C > D Pin 6 > 8 Pin Y > V Pin 4 > 12 Pin AA > X Pin 5 > 11 Pin E > H 308604-14.10 Rev 01 6-61 Cable Guide 44-Pin to F RS-232 Synchronous Pass-Through (Order No. 7943) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 13 Pin 1 Pin 25 Pin 14 25-position D-sub receptacle with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0081A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 3 Receive Data Receive Data + 3 2 Send Data Request to Send + 4 8 Data Carrier Detect Data Carrier Detect + 9 4 Request to Send Send Timing + 10 15 Send Timing Frame Ground 1 1 Frame Ground Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 4 > 5 Pin 4 > 5 Pin 10 > 11 > 12 Pin 15 > 17 Pin 13 > 28 Pin 6 > 20 Pin 14 > 29 Pin 7 > 19 > 20 6-62 308604-14.10 Rev 01 Standard Synchronous Cables 44-Pin to F V.35 Synchronous Pass-Through (Order No. 7944) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 A C E H P S U W Y AA Pin 44 Pin 31 44-position D-sub plug with screw locks (ground shield connected to backshell) B D F R T V X 34-position V.35 receptacle with screw jack retainers (ground shield connected to backshell) CAB0082A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 38 R Receive Data A VSD - 36 T Receive Data B VRD + 37 P Send Data A VRD - 35 S Send Data B Request to Send + 4 F Data Carrier Detect Data Carrier Detect + 9 C Request to Send VTT + 40 Y Send Timing A VTT - 39 AA Send Timing B Frame Ground 1 A Frame Ground Signal Ground 7 B Signal Ground (continued) 308604-14.10 Rev 01 6-63 Cable Guide Nortel Networks Termination Remote Termination Internal Wire Connections Pin 4 > 5 Pin C > D Pin 32 > 34 > 40 Pin V > Y Pin 31 > 33 > 39 Pin X > AA Pin 13 > 28 Pin E > H Pin 14 > 29 Pin 7 > 19 > 20 > 41 > 42 6-64 308604-14.10 Rev 01 Standard Synchronous Cables 50-Pin to F RS-232 Synchronous Pass-Through (Order No. 7945) 15 ft (4.57 m) Pin 25 Pin 13 Pin 1 Pin 50 50-position 0.8-mm plug (ground shield connected to internal shell) Pin 25 Pin 14 Pin 1 Pin 26 25-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0083A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 3 Receive Data Receive Data + 3 2 Send Data Request to Send + 4 8 Data Carrier Detect Data Carrier Detect + 9 4 Request to Send Send Timing + 10 15 Send Timing Frame Ground 1 1 Frame Ground Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 4 > 5 Pin 4 > 5 Pin 10 > 11 > 12 Pin 15 > 17 Pin 13 > 38 Pin 6 > 20 Pin 14 > 39 Pin 7 > 30 > 31 308604-14.10 Rev 01 6-65 Cable Guide 50-Pin to F V.35 Synchronous Pass-Through (Order No. 7946) 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 A C E H P S Y AA 50-position 0.8-mm plug (ground shield connected to internal shell) B D F R T V X 34-position V.35 receptacle with screw jack retainers (ground shield connected to backshell) CAB0084A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 44 R Receive Data A VSD - 19 T Receive Data B VRD + 43 P Send Data A VRD - 18 S Send Data B Request to Send + 4 F Data Carrier Detect Data Carrier Detect + 9 D Clear to Send VTT + 45 Y Send Timing A VTT - 20 AA Send Timing B Frame Ground 1 A Frame Ground Signal Ground 7 B Signal Ground (continued) 6-66 308604-14.10 Rev 01 Standard Synchronous Cables Nortel Networks Termination Remote Termination Internal Wire Connections Pin 4 > 5 Pin C > D Pin 41 > 42 > 45 Pin V > Y Pin 16 > 17 > 20 Pin X > AA Pin 13 > 38 Pin E > H Pin 14 > 39 Pin 7 > 30 > 31 > 46 > 47 308604-14.10 Rev 01 6-67 Chapter 7 Dial-Up Services Cables This chapter identifies dial-up services cables necessary for linking Nortel Networks router hardware platforms to WAN dial-on-demand and dial backup devices. Note: Order Nos. 7220, 7318, 7826, 7932, 7937, and 7943 (which are described in Chapter 6) support V.25bis. Table 7-1 summarizes the cables. Detailed cable illustrations and pinout specifications follow. Table 7-1. Dial-Up Services Cables Raise DTR Order No. Length Physical Cable Description V.25bis Page 7116 15 ft (4.57 m) 15-pin D-sub plug to RS-422 plug 9 7-3 7117 15 ft (4.57 m) 15-pin D-sub plug to RS-422 plug 9 7-5 7118 15 ft (4.57 m) 15-pin D-sub plug to RS-232 plug 9 7-7 7119 15 ft (4.57 m) 15-pin D-sub plug to RS-232 plug 9 7-8 7120 15 ft (4.57 m) 15-pin D-sub plug to V.35 plug 9 7-9 7121 15 ft (4.57 m) 15-pin D-sub plug to V.35 plug 9 7-10 7137 15 ft (4.57 m) 44-pin D-sub plug to V.35 plug 9 7-11 7138 15 ft (4.57 m) 44-pin D-sub plug to RS-232 plug 9 7-13 (continued) 308604-14.10 Rev 01 7-1 Cable Guide Table 7-1. Dial-Up Services Cables (continued) Order No. Length Physical Cable Description Raise DTR 7139 15 ft (4.57 m) 44-pin D-sub plug to RS-422 plug 9 7-14 7933 15 ft (4.57 m) 50-pin to V.35 with raise DTR 9 7-16 7935 15 ft (4.57 m) 50-pin to RS-232 with raise DTR 9 7-18 V.25bis Page If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) The following sections include: • Illustrations for each cable with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for each of your interconnection requirements, you should: -- Identify in this chapter a cable that satisfies your wiring requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). • Pinouts for each connector and all associated signals • Wire jumper identification for either connector (when applicable) For example, the 15-pin D-sub to RS-422 cable (Order No. 7116) lists internal wire connections (Pin 7 > 12; Pin 25 > 30) in the Remote Termination column. This indicates that you must connect pin 7 to pin 12 and pin 25 to pin 30 inside the remote connector. • 7-2 Grounding arrangements that isolate the chassis from the DC ground within the cable 308604-14.10 Rev 01 Dial-Up Services Cables 15-Pin D-Sub to RS-422: V.25bis (Order No. 7116) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 1 Pin 19 Pin 15 Pin 20 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 37 37-position D-sub plug with screw locks (ground shield connected to backshell) CAB0003A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 37 Send Ground Send Data + 2 4 Send Data A Send Data - 3 22 Send Data B Serial Clock Transmit + 4 5 Send Timing A Serial Clock Transmit - 5 23 Send Timing B Request to Send + 6 7 Request to Send A Clear to Send - 7 27 Clear to Send B Clear to Send + 8 9 Clear to Send A Data Carrier Detect - 9 29 Data Mode B Data Carrier Detect + 10 11 Data Mode A Serial Clock Receive - 11 26 Receive Timing B Serial Clock Receive + 12 8 Receive Timing A Receive Data - 13 24 Receive Data B Receive Data + 14 6 Receive Data A (continued) 308604-14.10 Rev 01 7-3 Cable Guide Nortel Networks Termination Request to Send - Remote Termination 15 25 Request to Send B Internal Wire Connections Pin 7 > 12 (Terminal Ready A) Pin 25 > 30 (Terminal Ready B) Note: You must move jumpers B and C to the X.21 (2-3) position to support this interface. 7-4 308604-14.10 Rev 01 Dial-Up Services Cables 15-Pin D-Sub to RS-422: Raise DTR (Order No. 7117) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 1 Pin 19 Pin 15 Pin 20 37-position D-sub plug with screw locks (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 37 CAB0004A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 37 Send Ground Send Data + 2 4 Send Data A Send Data - 3 22 Send Data B Serial Clock Transmit + 4 5 Send Timing A Serial Clock Transmit - 5 23 Send Timing B Request to Send + 6 7 Request to Send A Clear to Send - 7 29 Data Mode B Clear to Send + 8 11 Data Mode A Data Carrier Detect + 10 15 Incoming Call Serial Clock Receive - 11 26 Receive Timing B Serial Clock Receive + 12 8 Receive Timing A Receive Data - 13 24 Receive Data B Receive Data + 14 6 Receive Data A Request to Send - 15 25 Request to Send B (continued) 308604-14.10 Rev 01 7-5 Cable Guide Nortel Networks Termination Remote Termination Internal Wire Connections Pin 1 > 9 Pin 7 > 12 (Terminal Ready A) Pin 25 > 30 > 37 Note: You must move jumpers B and C to the X.21 (2-3) position to support this interface. 7-6 308604-14.10 Rev 01 Dial-Up Services Cables 15-Pin D-Sub to RS-232: Raise DTR (Order No. 7118) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) P Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0005A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 7 Signal Ground Transmitted Data 2 2 Transmitted Data Transmitter Signal Element Timing (DTE Source) 3 24 Transmitter Signal Element Timing (DTE Source) Transmitter Signal Element Timing 4 (DCE Source) 15 Transmitter Signal Element Timing (DCE Source) Request to Send 6 4 Request to Send Clear to Send 8 6 Data Set Ready Data Carrier Detect 10 22 Ring Indicator Receiver Signal Element Timing (DCE Source) 12 17 Receiver Signal Element Timing (DCE Source) Received Data 14 3 Received Data Internal Wire Connections Pin 1 > 7 308604-14.10 Rev 01 Pin 4 > 20 (Data Terminal Ready) 7-7 Cable Guide 15-Pin D-Sub to RS-232: V.25bis (Order No. 7119) 15 ft (4.57 m) Pin 1 Pin 8 Pin 9 Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) Pin 1 P Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0006A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 7 Signal Ground Transmitted Data 2 2 Transmitted Data Transmitter Signal Element Timing (DTE Source) 3 24 Transmitter Signal Element Timing (DTE Source) Transmitter Signal Element Timing 4 (DCE Source) 15 Transmitter Signal Element Timing (DCE Source) Request to Send 6 4 Request to Send Clear to Send 8 5 Clear to Send Data Carrier Detect 10 6 Data Set Ready Receiver Signal Element Timing (DCE Source) 12 17 Receiver Signal Element Timing (DCE Source) Received Data 14 3 Received Data Internal Wire Connections Pin 1 > 7 7-8 Pin 4 > 20 (Data Terminal Ready) 308604-14.10 Rev 01 Dial-Up Services Cables 15-Pin D-Sub to V.35: V.25bis (Order No. 7120) 15 ft (4.57 m) Pin 1 A E C H P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) Pin 8 Pin 9 B D R T V X Pin 15 15-position D-sub plug with locking posts (ground shield connected to backshell) CAB0007A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Send Data + 2 P Send Data A Send Data - 3 S Send Data B Serial Clock Transmit + 4 Y Send Timing A Serial Clock Transmit - 5 AA Send Timing B Request to Send + 6 C Request to Send Clear to Send + 8 D Clear to Send Data Carrier Detect + 10 E Data Set Ready Serial Clock Receive - 11 X Receive Timing B Serial Clock Receive + 12 V Receive Timing A Receive Data - 13 T Receive Data B Receive Data + 14 R Receive Data A Internal Wire Connections Pin 1 > 7 308604-14.10 Rev 01 Pin C > H (Data Terminal Ready) 7-9 Cable Guide 15-Pin D-Sub to V.35: Raise DTR (Order No. 7121) 15 ft (4.57 m) Pin 1 A E Pin 8 B J Pin 9 C H R T Pin 15 P S Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) 15-position D-sub plug with locking posts (ground shield connected to backshell) V X CAB0008A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Signal Ground 1 B Signal Ground Send Data + 2 P Send Data A Send Data - 3 S Send Data B Serial Clock Transmit + 4 Y Send Timing A Serial Clock Transmit - 5 AA Send Timing B Request to Send + 6 C Request to Send Clear to Send + 8 E Data Set Ready Data Carrier Detect + 10 J Ring Indicator Serial Clock Receive - 11 X Receive Timing B Serial Clock Receive + 12 V Receive Timing A Receive Data - 13 T Receive Data B Receive Data + 14 R Receive Data A Internal Wire Connections Pin 1 > 7 7-10 Pin C > H (Data Terminal Ready) 308604-14.10 Rev 01 Dial-Up Services Cables 44-Pin D-Sub to V.35: Raise DTR (Order No. 7137) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) A C E H P S U W Y AA 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) B D J R T V X CAB0018A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 A Frame Ground Request to Send + 4 C Request to Send Clear to Send + 5 D Clear to Send Data Set Ready + 6 E Data Set Ready Data Terminal Ready + 8 H Data Terminal Ready Data Carrier Detect + 9 J Ring Indicator VTT + 40 U Terminal Timing A VTT - 39 W Terminal Timing B Signal Ground 19 B Signal Ground VST + 32 Y Send Timing A VST - 31 AA Send Timing B VRT + 34 V Receive Timing A VRT - 33 X Receive Timing B (continued) 308604-14.10 Rev 01 7-11 Cable Guide Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VRD + 37 R Receive Data A VRD - 35 T Receive Data B VSD + 38 P Send Data A VSD - 36 S Send Data B Internal Wire Connections Pin 7 > 19 > 20 Pin 41 > 42 > 43 Pin 13 > 28 Pin 14 > 29 7-12 308604-14.10 Rev 01 Dial-Up Services Cables 44-Pin D-Sub to RS-232: Raise DTR (Order No. 7138) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 13 Pin 14 Pin 25 25-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0019A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send + 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Signal Ground 7 7 Signal Ground Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 22 Ring Indicator Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Transmitter Signal Element Timing + 12 24 Transmitter Signal Element Timing Internal Wire Connections Pin 7 > 19 > 20 Pin 13 > 28 Pin 14 > 29 308604-14.10 Rev 01 7-13 Cable Guide 44-Pin D-Sub to RS-422: Raise DTR (Order No. 7139) 15 ft (4.57 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 Pin 1 Pin 19 Pin 20 Pin 37 37-position D-sub plug with screw locks (ground shield connected to backshell) 44-position D-sub plug with screw locks (ground shield connected to backshell) CAB0020A Industry Interface Type: RS-449/RS-422 Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Data + 2 4 Send Data A Send Data - 16 22 Send Data B Receive Data + 3 6 Receive Data A Receive Data - 17 24 Receive Data B Request to Send + 4 7 Request to Send A Request to Send - 18 25 Request to Send B Clear to Send + 5 9 Clear to Send A Clear to Send - 19 27 Clear to Send B Data Set Ready + 6 11 Data Mode A Data Set Ready - 20 29 Data Mode B Terminal Ready + 8 12 Data Terminal Ready A Terminal Ready - 22 30 Data Terminal Ready B Data Carrier Detect + 9 15 Ring Indicator (continued) 7-14 308604-14.10 Rev 01 Dial-Up Services Cables Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Send Timing + 10 5 Send Timing A Send Timing - 24 23 Send Timing B Receive Timing + 11 8 Receive Timing A Receive Timing - 25 26 Receive Timing B Terminal Timing + 12 17 Terminal Timing A Terminal Timing - 26 35 Terminal Timing B Send Common 44 37 Send Common Signal Ground 41 19 Signal Ground Internal Wire Connections Pin 13 > 28 Pin 14 > 29 Pin 23 > 41 > 43 308604-14.10 Rev 01 7-15 Cable Guide 50-Pin to V.35: Raise DTR (Order No. 7933) 15 ft (4.57 m) Pin 1 Pin 25 Pin 26 Pin 50 A C E H P S U W Y AA B D J R T V X 50-position 0.8-mm plug (ground shield connected to internal shell) 34-position V.35 plug with screw jack retainers (ground shield connected to backshell) CAB0071A Industry Interface Type: V.35 (V.10 and V.11) Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal VSD + 44 P Send Data A VSD - 19 S Send Data B VRT + 42 V Receive Timing A VRT - 17 X Receive Timing B VST + 41 Y Send Timing A VST - 16 AA Send Timing B VRD + 43 R Receive Data A VRD - 18 T Receive Data B Data Set Ready + 6 E Data Set Ready Data Terminal Ready + 8 H Data Terminal Ready Request to Send + 4 C Request to Send Clear to Send + 5 D Clear to Send VTT + 45 U Terminal Timing A VTT - 20 W Terminal Timing B (continued) 7-16 308604-14.10 Rev 01 Dial-Up Services Cables Nortel Networks Termination Remote Termination Frame Ground 1 A Frame Ground Data Carrier Detect + 9 J Ring Indicator Signal Ground 30 B Signal Ground Internal Wire Connections Pin 7 > 30 > 31 Pin 46 > 47 > 48 Pin 13 > 38 Pin 14 > 39 308604-14.10 Rev 01 7-17 Cable Guide 50-Pin to RS-232: Raise DTR (Order No. 7935) 15 ft (4.57 m) Pin 1 Pin 25 Pin 1 Pin 13 Pin 26 Pin 50 Pin 14 Pin 25 50-position 0.8-mm plug (ground shield connected to internal shell) 25-position D-sub plug with screw locks (ground shield connected to backshell) CAB0072A Industry Interface Type: RS-232-C Nortel Networks Termination Remote Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data Receive Data + 3 3 Receive Data Request to Send + 4 4 Request to Send Clear to Send + 5 5 Clear to Send Data Set Ready + 6 6 Data Set Ready Data Terminal Ready + 8 20 Data Terminal Ready Data Carrier Detect + 9 22 Ring Indicator Send Timing + 10 15 Send Timing Receive Timing + 11 17 Receive Timing Terminal Timing + 12 24 Terminal Timing Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 7 > 30 > 31 Pin 13 > 38 Pin 14 > 39 7-18 308604-14.10 Rev 01 Chapter 8 Cable Adapters This chapter identifies the cable adapters that enable existing cables to connect to different ports. These cable assemblies automatically select the appropriate interface type. Table 8-1 summarizes the cable adapters. Detailed cable illustrations and pinouts follow. Table 8-1. Cable Adapters Order No. Length Physical Cable Description Page 7122 12 in. (0.3 m) 44-pin to 15-pin RS-232 cable adapter 8-3 7123 12 in. (0.3 m) 44-pin to 15-pin X.21 cable adapter 8-5 7124 12 in. (0.3 m) 44-pin to 15-pin V.35 cable adapter 8-7 7131 12 in. (0.3 m) 44-pin to 15-pin RS-422 cable adapter 8-9 7947 12 in. (0.3 m) 50-pin to 44-pin cable adapter 8-11 7948 12 in. (0.3 m) 50-pin to 15-pin V.35 cable adapter 8-14 AA0018024 12 in. (0.3 m) 50-pin to 15-pin RS-422 cable adapter 8-16 AA0018040 Not applicable Model 460F-BN coaxial to RJ-45 adapter (Balun), for use with the AA0018040 ATM E1 RJ-45 to RJ-45 cable 8-18 309329-A Not applicable 9-pin to 25-pin external modem adapter for Passport 5430 only 8-19 If you need to order additional cables, contact the Nortel Networks Technical Solutions Center in your area. (See “How to Get Help” in the Preface.) 308604-14.10 Rev 01 8-1 Cable Guide The following sections include: • Cable illustrations with the Nortel Networks connector on the left and the remote connector on the right • Cable length information If you want to build a cable, and you want to determine the maximum cable length appropriate for that interconnection requirement, you should: -- Identify in this chapter a cable that satisfies your interconnection requirement (with the exception of total cable length). -- Consult the networking industry specification, standard, or recommendation designated in the “Industry Interface Type” entry for that cable (located immediately following the cable pinout diagram). • Pinouts for each connector and all associated signals • Internal wire connections for each termination (when applicable) For example, the 44-pin to 15-pin RS-232 cable adapter (Order No. 7122) lists internal wire connections such as “Pin 13 > 28” in the Nortel Networks Termination column. This indicates that you must connect pin 13 to pin 28 inside the Nortel Networks termination. • 8-2 Grounding arrangements that isolate the chassis from the DC ground within the cable (when applicable) 308604-14.10 Rev 01 Cable Adapters 44-Pin to 15-Pin RS-232 Cable Adapter (Order No. 7122) Note: This adapter enables you to connect an existing 15-pin RS-232 cable (Order No. 7255 or 7256) to a 44-pin port. This cable assembly automatically selects the RS-232 interface. 12 in. (0.3 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0010A Industry Interface Type: RS-232-C Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal Send Data + 2 2 Send Data Receive Data + 3 14 Receive Data Request to Send + 4 6 Request to Send (continued) 308604-14.10 Rev 01 8-3 Cable Guide Nortel Networks Termination Termination to Existing Cable Clear to Send + 5 8 Clear to Send Data Set Ready + 6 15 Data Set Ready Data Carrier Detect + 9 10 Data Carrier Detect Send Timing + 10 4 Send Timing Receive Timing + 11 12 Receive Timing Transmitter Timing + 12 3 Transmitter Timing Signal Ground 7 7 Signal Ground Internal Wire Connections Pin 7 > 19 > 20 > 23 Pin 1 > 7 > 9 Pin 13 > 28 Pin 14 > 29 8-4 308604-14.10 Rev 01 Cable Adapters 44-Pin to 15-Pin X.21 Cable Adapter (Order No. 7123) Note: This adapter enables you to connect an existing 15-pin X.21 cable (Order No. 7221) to a 44-pin port. This cable assembly automatically selects the X.21 interface. 12 in. (0.3 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0010A Industry Interface Type: X.21 Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal Send Data + 2 2 Send Data + Send Data - 16 3 Send Data - Receive Data + 3 14 Receive Data + (continued) 308604-14.10 Rev 01 8-5 Cable Guide Nortel Networks Termination Termination to Existing Cable Receive Data - 17 13 Receive Data - Data Carrier Detect + 9 10 Data Carrier Detect + Data Carrier Detect - 23 9 Data Carrier Detect - Request to Send + 4 6 Request to Send + Request to Send - 18 15 Request to Send - Send Timing + 10 4 Timing + Send Timing - 24 5 Timing - Signal Ground 7 1 Signal Ground Internal Wire Connections Pin 7 > 19 > 20 > 23 Pin 1 > 7 > 9 Pin 28 > 30 Pin 4 > 12 Pin 14 > 15 Pin 5 > 11 Pin 41 > 43 8-6 308604-14.10 Rev 01 Cable Adapters 44-Pin to 15-Pin V.35 Cable Adapter (Order No. 7124) Note: This adapter enables you to connect an existing 15-pin V.35 cable (Order No. 7215 or 7216) to a 44-pin port. This cable assembly automatically selects the V.35 interface. 12 in. (0.3 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0010A Industry Interface Type: V.35 Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal VRD + 37 14 Receive Data + VRD - 35 13 Receive Data - VSD + 38 2 Send Data + VSD - 36 3 Send Data - (continued) 308604-14.10 Rev 01 8-7 Cable Guide Nortel Networks Termination Termination to Existing Cable Data Carrier Detect + 9 10 Data Carrier Detect + Request to Send + 4 6 Request to Send + Clear to Send + 5 8 Clear to Send + Data Set Ready + 6 15 Data Set Ready + VRT + 34 12 Receive Timing + VRT - 33 11 Receive Timing - VST + 32 4 Send Timing + VST - 31 5 Send Timing - Signal Ground 19 1 Signal Ground Internal Wire Connections Pin 7 > 19 > 20 > 23 Pin 1 > 7 > 9 Pin 13 > 28 Pin 14 > 29 Pin 41 > 42 > 43 8-8 308604-14.10 Rev 01 Cable Adapters 44-Pin to 15-Pin RS-422 Cable Adapter (Order No. 7131) Note: This adapter enables you to connect an existing 15-pin RS-422 cable (Order No. 7315 or AA0018011) to a 44-pin port. This cable assembly automatically selects the RS-422 interface. 12 in. (0.3 m) Pin 1 Pin 15 Pin 16 Pin 30 Pin 31 Pin 44 44-position D-sub plug with screw locks (ground shield connected to backshell) Pin 8 Pin 1 Pin 15 Pin 9 15-position D-sub receptacle with slide latch connected to backshell CAB0010A Industry Interface Type: RS-422 Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal Send Data + 2 2 Send Data + Send Data - 16 3 Send Data - Receive Data + 3 14 Receive Data + Receive Data - 17 13 Receive Data - (continued) 308604-14.10 Rev 01 8-9 Cable Guide Nortel Networks Termination Termination to Existing Cable Data Carrier Detect + 9 10 Data Carrier Detect + Data Carrier Detect - 23 9 Data Carrier Detect - Request to Send + 4 6 Request to Send + Request to Send - 18 15 Request to Send - Clear to Send + 5 8 Clear to Send + Clear to Send - 19 7 Clear to Send - Send Timing + 10 4 Serial Clock Transmit + Send Timing - 24 5 Serial Clock Transmit - Receive Timing + 11 12 Serial Clock Receive + Receive TIming - 25 11 Serial Clock Receive - Signal Ground 7 1 Signal Ground Internal Wire Connections Pin 13 > 28 Pin 14 > 29 Pin 41 > 43 8-10 308604-14.10 Rev 01 Cable Adapters 50-Pin to 44-Pin Cable Adapter (Order No. 7947) Note: This adapter allows you to connect an existing 44-pin cable to a 50-pin port. The interface is automatically selected. 12 in. (0.3 m) Pin 25 Pin 1 Pin 50 Pin 26 Pin 15 Pin 1 Pin 30 Pin 16 Pin 44 50-position 0.8-mm plug (ground shield connected to internal shell) Pin 31 44-position D-sub receptacle with screw locks (ground shield connected to backshell) CAB0085A Industry Interface Type: Cable-dependent Nortel Networks 50-Pin Termination Nortel Networks 44-Pin Termination Signal Pin # to Pin # Signal Frame Ground 1 1 Frame Ground Send Data + 2 2 Send Data + Send Data - 27 16 Send Data - Receive Data + 3 3 Receive Data + Receive Data - 28 17 Receive Data - Request to Send + 4 4 Request to Send + Request to Send - 29 18 Request to Send - Clear to Send + 5 5 Clear to Send + Clear to Send - 30 19 Clear to Send - (continued) 308604-14.10 Rev 01 8-11 Cable Guide Nortel Networks 50-Pin Termination Nortel Networks 44-Pin Termination Data Set Ready + 6 6 Data Set Ready + Data Set Ready - 31 20 Data Set Ready - Signal Ground 7 7 Signal Ground Data Terminal Ready + 8 8 Data Terminal Ready + Data Terminal Ready - 33 22 Data Terminal Ready - Data Carrier Detect + 9 9 Data Carrier Detect + Data Carrier Detect - 34 23 Data Carrier Detect - Send Timing + 10 10 Send Timing + Send Timing - 35 24 Send Timing - Receive Timing+ 11 11 Receive Timing + Receive Timing- 36 25 Receive Timing - Transmitter Timing+ 12 12 Transmitter Timing + Transmitter Timing- 37 26 Transmitter Timing - RTIN# 13 13 RTIN# RTINB# 38 28 RTINB# Clear to Send# 14 14 Clear to Send# CTSIN# 39 29 CTSIN# RTS# 15 15 RTS# ST# 40 30 ST# V.35 Send Timing- 16 31 V.35 Send Timing- Signal Pin # to Pin # Signal V.35 Send Timing + 41 32 V.35 Send Timing + V.35 Receive Timing - 17 33 V.35 Receive Timing - V.35 Receive Timing + 42 34 V.35 Receive Timing + V.35 Receive Data - 18 35 V.35 Receive Data - V.35 Receive Data + 43 37 V.35 Receive Data + V.35 Send Data - 19 36 V.35 Send Data - V.35 Send Data + 44 38 V.35 Send Data + V.35 Transmitter Timing - 20 39 V.35 Transmitter Timing - V.35 Transmitter Timing + 45 40 V.35 Transmitter Timing + (continued) 8-12 308604-14.10 Rev 01 Cable Adapters Nortel Networks 50-Pin Termination Nortel Networks 44-Pin Termination UNBE 46 41 UNBE V35D 47 42 V35D Ground 48 43 Ground Send Common 49 44 Send Common 308604-14.10 Rev 01 8-13 Cable Guide 50-Pin to 15-Pin V.35 Cable Adapter (Order No. 7948) Note: This adapter allows you to connect an existing 15-pin V.35 cable (Order No. 7215 or 7216) to a 50-pin port. The V.35 interface is automatically selected. 12 in. (0.3 m) Pin 8 Pin 1 Pin 15 Pin 9 Pin 25 Pin 1 Pin 50 Pin 26 15-position D-sub receptacle with slide latch connected to backshell 50-position 0.8-mm plug (ground shield connected to internal shell) CAB0110A Industry Interface Type: V.35 Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal V.35 Receive Data + 43 14 Receive Data + V.35 Receive Data - 18 13 Receive Data - V.35 Send Data + 44 2 Send Data + V.35 Send Data - 19 3 Send Data - (continued) 8-14 308604-14.10 Rev 01 Cable Adapters Nortel Networks Termination Termination to Existing Cable Data Carrier Detect + 9 10 Data Carrier Detect + Request to Send + 4 6 Request to Send + Clear to Send + 5 8 Clear to Send + Data Set Ready + 6 15 Data Set Ready + V.RT + 42 12 Receive Timing + VRT - 17 11 Receive Timing - VRT + 14 4 Send Timing + VRT - 16 5 Send Timing - Signal Ground 7 1 Signal Ground Internal Wire Connections Pin 7 > 30 > 31 > 34 Pin 1 > 7 > 9 Pin 13 > 38 Pin 14 > 39 Pin 46 > 47 > 48 308604-14.10 Rev 01 8-15 Cable Guide 50-Pin to 15-Pin RS-422 Cable Adapter (Order No. AA0018024) Note: This adapter allows you to connect an existing 15-pin RS-422 cable (Order No. 7315 or AA0018011) to a 50-pin port. The RS-422 interface is automatically selected. 12 in. (0.3 m) Pin 8 Pin 1 Pin 15 Pin 9 Pin 25 Pin 1 Pin 50 Pin 26 15-position D-sub receptacle with slide latch connected to backshell 50-position 0.8-mm plug (ground shield connected to internal shell) CAB0110A Industry Interface Type: RS-422 Caution: You cannot use this cable adapter to provide a clock (master) to an attached service. This is a passive straight-through cable. Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal Send Data + 2 2 Send Data + Send Data - 27 3 Send Data - Receive Data + 3 14 Receive Data + (continued) 8-16 308604-14.10 Rev 01 Cable Adapters Nortel Networks Termination Termination to Existing Cable Receive Data - 28 13 Receive Data - Request to Send + 4 6 Request to Send + Request to Send - 29 15 Request to Send - Clear to Send + 5 8 Clear to Send + Clear to Send - 30 7 Clear to Send - Data Carrier Detect + 9 10 Data Carrier Detect + Data Carrier Detect - 34 9 Data Carrier Detect - Send Timing + 10 4 Serial Clock Transmit + Send Timing - 35 5 Serial Clock Transmit - Receive Timing + 11 12 Serial Clock Receive + Receive Timing - 36 11 Serial Clock Receive - Signal Ground 7 1 Signal Ground Internal Wire Connections Pin 13 > 38 Pin 14 > 39 Pin 46 > 48 308604-14.10 Rev 01 8-17 Cable Guide Model 460F-BN G.703 Coaxial to RJ-45 Adapter (Balun) (Order No. AA0018040) Note: This adapter allows you to connect an ATM E1 interface on a Passport 5430 (a 120-ohm, RJ-45 interface) to E1 service (dual 75-ohm, coaxial cable). Use this adapter with the AA0018040 RJ-45 to RJ-45 cable described in Chapter 5. Coaxial (75-ohm) RJ-45 CAB0112A Industry Interface Type: E1 8-18 308604-14.10 Rev 01 Cable Adapters Passport 5430 External Modem Adapter (Order No. 309329-A) Note: This adapter allows you to connect an existing AA0018029 PC console cable to an RS-232 modem port. Pin 1 Pin 5 Pin 6 Pin 9 Pin 1 Pin 13 Pin 14 Pin 25 CAB0113A Nortel Networks Termination Termination to Existing Cable Signal Pin # to Pin # Signal Data Carrier Detect 1 8 Data Carrier Detect Receive Data 2 2 Send Data Send Data 3 3 Receive Data Data Terminal Ready 4 20 Data Terminal Ready Signal Ground 5 7 Signal Ground Data Set Ready 6 6 Data Set Ready Request to Send 7 4 Request to Send Clear to Send 8 5 Clear to Send Ring Indication 9 22 Ring Indication 308604-14.10 Rev 01 8-19 Index Numbers 7115, Ethernet cable, 3-3 7116, 15-pin to RS-422 (V.25bis) cable, 7-3 7117, 15-pin to RS-422 (raise DTR) cable, 7-5 7118, 15-pin to RS-232 (raise DTR) cable, 7-7 7119, 15-pin to RS-232 (V.25bis) cable, 7-8 7120, 15-pin to V.35 (V.25bis) cable, 7-9 7121, 15-pin to V.35 (raise DTR) cable, 7-10 7122, 44-pin to 15-pin RS-232 cable adapter, 8-3 7161, MCE1 straight-through cable, 5-21 7162, MCE1 coaxial cable, 5-22 7163, FDDI SC duplex to SC duplex, MM fiber cable, 3-9 7164, FDDI SC duplex to straight-tip, SM fiber cable, 3-8 7165, FDDI SC duplex to SC duplex, SM fiber cable, 3-9 7123, 44-pin to 15-pin X.21 cable adapter, 8-5 7167, MCE1 DB9 to DB15 straight-through cable, 5-23 7124, 44-pin to 15-pin V.35 cable adapter, 8-7 7168, MCE1 DB9 to DB15 crossover cable, 5-24 7125, Token Ring MAU cable, 3-4 7169, ATM cable, 3-10 7126, Token Ring MAU cable (with ferrite bead), 3-5 7215, 15-pin to synchronous V.35 cable, 6-20 7128, Token Ring to RJ-11 cable, 3-6 7216, 15-pin synchronous to V.35 with DTR cable, 6-22 7131, 44-pin to 15-pin RS-422 cable adapter, 8-9 7135, FDDI FSD to FSD cable, 3-7 7136, FDDI FSD to straight-tip cable, 3-7 7137, 44-pin to V.35 (raise DTR) cable, 7-11 7138, 44-pin to RS-232 (raise DTR) cable, 7-13 7139, 44-pin to RS-422 (raise DTR) cable, 7-14 7150, MCT1 clock cable, 5-11, 5-12 7151, MCT1 15-pin loopback connector, 5-13 7152, MCT1 RJ-48 loopback connector, 5-14 7153, MCT1 crossover cable, 5-15 7154, MCT1 RJ-48 loopback cable, 5-16 7155, MCT1 15-pin loopback cable, 5-17 7156, MCT1 RJ-48 straight-through cable, 5-18 7157, MCT1 15-pin straight-through cable, 5-19 7158, 15-pin to male V.35 cable, 6-17 7159, 44-pin to male V.35 cable, 6-18 7218, RS-232 synchronous pass-through cable, 6-23 7219, 15-pin synchronous to V.35 pass-through cable, 6-24 7220, 44-pin synchronous to V.35 cable, 6-26 7221, 15-pin synchronous to X.21 cable, 6-28 7224, 44-pin synchronous to X.21 cable, 6-29 7255, 15-pin synchronous to RS-232 cable, 6-30 7256, 15-pin synchronous to V.28 cable, 6-31 7260, 15-pin to 15-pin crossover cable, 6-32 7315, 15-pin synchronous to RS-422 cable, 6-34 7318, 44-pin synchronous to RS-422 cable, 6-36 7401, T1 to CSU DTE cable, 5-25 7415, T1 to Customer Premise Equipment cable, 5-26 7525, console cable, for all except AFN and AN, 2-3 7526, console cable, AFN/AN only, 2-4, 2-8 7527, AT serial console cable, 2-5 7160, MCE1 crossover cable, 5-20 308604-14.10 Rev 01 Index-1 7650, CSU network receptacle to RJ-45 cable, 5-27 7750, CSU network receptacle to spade terminals cable, 5-28 77850, modem cable for BLN, BLN-2, or BCN platforms only, 2-7 7825, modem cable for all except BLN, BLN-2, or BCN platform, 2-6 7826, 44-pin synchronous to RS-232 cable, 6-38 7830, HSSI DCE to DTE, 10-ft cable, 4-3 7831, HSSI DCE to DTE, 50-ft cable, 4-3 7832, HSSI crossover cable, 4-5 7833, RS-232 synchronous pass-through cable, 6-39 7834, 44-pin to V.35 pass-through cable, 6-1 7835, V.35 44-pin to 44-pin crossover cable, 6-42 7836, V.35 44-pin to 15-pin crossover cable, 6-44 7837, 44-pin synchronous to V.28 cable, 6-46 A AA001126, Passport 2430 and Passport 5430 Fast Branch Router console interface to PC, 2-8 AA0018001, MCE1 DB9 to mod jack cable, 5-4 AA0018002, MCE1 DB9 to unterminated cable, 5-5 AA0018003, 15-pin to F X.21 synchronous pass-through cable, 6-4 AA0018004, 44-pin to F X.21 synchronous pass-through cable, 6-6 AA0018005, 50-pin to X.21 synchronous pass-through cable, 6-1 AA0018006, Quad MCT1 clock cable, 5-6 AA0018011, 15-pin to RS-530 straight-through cable, 6-10 AA0018012, 44-pin to RS-530 straight-through cable, 6-12 7933, 50-pin to V.35 (raise DTR) cable, 7-16 AA0018013, 50-pin to RS-530 straight-through cable, 6-14 7934, 50-pin to RS-232 cable, 6-50 AA0018014, MCE1 RJ-45 to RJ-45 cable, 5-7 7935, 50-pin to RS-232 (raise DTR) cable, 7-18 AA0018015, MCE1 RJ-45 to unterminated cable, 5-8 7936, 50-pin to X.21 cable, 6-51 AA0018021, Quad MCT1 crossover cable, 5-9 7937, 50-pin to RS-422 cable, 6-52 AA0018022, Quad MCT1 straight-through cable, 5-10 7938, 50-pin to 50-pin crossover cable, 6-54 AA0018023, 50-pin to V.28 cable, 6-16 7939, 50-pin to 15-pin crossover cable, 6-56 AA0018024, 50-pin to 15-pin RS-422 cable adapter, 8-16 7932, 50-pin to V.35 cable, 6-48 7940, 50-pin to 44-pin crossover cable, 6-58 7941, 15-pin to F RS-232 synchronous pass-through cable, 6-60 7942, 15-pin to F V.35 synchronous pass-through cable, 6-61 AA0018040, ATM E1 RJ-45 to RJ-45 cable, 5-11 AA0018040, Model 460F-BN G.703 coaxial to RJ-45 adapter (balun), 8-18 acronyms, xvi 7943, 44-pin to F RS-232 synchronous pass-through cable, 6-62 AFN/AN console interface to ASCII terminal cable, 2-4, 2-8 7944, 44-pin to F V.35 synchronous pass-through cable, 6-63 ATM cable, SC to straight-tip MMF, 3-10 Attachment Unit Interface (AUI), defined, 1-9 7945, 50-pin to F RS-232 synchronous pass-through cable, 6-65 B 7946, 50-pin to F V.35 synchronous pass-through cable, 6-66 basics, connector, 1-8 7947, 50-pin to 44-pin V.35 cable adapter, 8-11 BLN, BLN-2, or BCN to modem cable, 2-7 7948, 50-pin to 15-pin V.35 cable adapter, 8-14 building cables, 1-11 Index-2 308604-14.10 Rev 01 C cable adapters Model 460F-BN G.703 coaxial to RJ-45 (balun), 8-18 RS-232 44-pin to 15-pin, 8-3 RS-422 44-pin to a 15-pin, 8-9 RS-422 50-pin to 15-pin, 8-16 V.35 44-pin to 15-pin, 8-7 V.35 50-pin to 15-pin, 8-14 V.35 50-pin to 44-pin, 8-11 X.21 44-pin to 15-pin, 8-5 cables building your own, 1-11 finding by category, 1-3 industry interface type, 1-11 order number, 1-4 type, 1-1 CCITT series connectors, defined, 1-9 channel service unit (CSU), 5-1 coaxial cables, MCE1, 5-22 connection categories, 1-3 connectors examples (diagram), 1-10 MCT1 loopback 15-pin, 5-13 RJ-48, 5-14 terminology, 1-8 types, 1-9 console cables AFN and AN only, 2-4, 2-8 all devices except AFN and AN, 2-3 AT serial connection, 2-5 listed, 2-1 Passport 2430 and Passport 5430 only, 2-8 conventions, text, xv crossover cables 15-pin to 15-pin, 6-32 50-pin to 15-pin, 6-56 50-pin to 44-pin, 6-58 50-pin to 50-pin, 6-54 HSSI, 4-5 308604-14.10 Rev 01 MCE1 9-pin to 15-pin, 5-24 9-pin to 9-pin, 5-20 MCT1 15-pin to 15-pin, multichannel, 5-9 15-pin to RJ-48, 5-15 V.35 44-pin to 15-pin, 6-44 44-pin to 44-pin, 6-42 custom cables, 1-11 customer support, xvii D dialup services cables 15-pin to RS-232 (raise DTR), 7-7 15-pin to RS-232 (V.25bis), 7-8 15-pin to RS-422 (raise DTR), 7-5 15-pin to RS-422 (V.25bis), 7-3 15-pin to V.35 (raise DTR), 7-10 15-pin to V.35 (V.25bis), 7-9 44-pin to RS-232 (raise DTR), 7-13 44-pin to RS-422 (raise DTR), 7-14 44-pin to V.35 (raise DTR), 7-11 50-pin to RS-232 (raise DTR), 7-18 50-pin to V.35 (raise DTR), 7-16 listed, 7-1 DSX, 5-1 DTE to DCE connector, defined, 1-9 dust covers, fiber optic connector, 1-9 E E1 cables, listed, 5-1 Ethernet cable, 3-3 F FC connector, defined, 1-9 FDDI cables, 3-7 to 3-9 fiber optic connector, dust cover, 1-9 fixed shroud duplex (FSD) connector, defined, 1-9 Index-3 H how to use this guide, 1-2 HSSI cables crossover, 4-5 DCE to DTE, 10 ft and 50 ft, 4-3 listed, 4-1 loopback cables, MCT1 15-pin, 5-17 RJ-48, 5-16 loopback connectors, MCT1 15-pin, 5-13 RJ-48, 5-14 M I industry interface type defined, 1-11 E1, 5-4, 5-5, 5-7, 5-8, 5-11 E1/G.703, 5-20 to 5-24 Ethernet/802.3, 3-3 High-Speed Serial Interface (HSSI), 4-3, 4-5 RS-232-C, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 6-23, 6-30, 6-38, 6-39, 6-50, 6-60, 6-62, 6-65, 7-7, 7-8, 7-13, 7-18, 8-3 RS-422, 8-9, 8-14, 8-16, 8-18 RS-449/RS-422, 6-34, 6-36, 6-52, 7-3, 7-5, 7-14 RS-530, 6-10, 6-12, 6-14 T1/DS1, 5-9, 5-10, 5-15 to 5-19, 5-25 to 5-28 with external clock, 5-6, 5-12 token ring/802.5, 3-4 to 3-6 V.28 (V.10), 6-16, 6-31, 6-46 V.35, 6-32, 8-7, 8-11 V.35 (V.10 and V.11), 6-17 to 6-22, 6-24, 6-26, 6-40, 6-42, 6-44, 6-48, 6-54, 6-56, 6-58, 6-61, 6-63, 6-66, 7-9, 7-10, 7-11, 7-16 X.21, 6-4, 6-6, 6-8, 8-5 X.21 (V.11), 6-28, 6-29, 6-51 X3T9.5 PMD/FDDI, 3-7 to 3-10 industry standards, specifications, and recommendations, 1-11 interface, defined, 1-8 MCE1 cables coaxial, 5-22 crossover 9-pin to 9-pin, 5-20 DB9 to DB15, 5-24 DB9 to mod jack, 5-4 DB9 to unterminated, 5-5 RJ-45 to RJ-45, 5-7 RJ-45 to unterminated, 5-8 straight-through 9-pin to 9-pin, 5-21 DB9 to DB15, 5-23 MCT1 cables 15-pin to 15-pin and 9-pin (Y-cable), 5-6 clock, 5-11, 5-12 crossover 15-pin to 15-pin, 5-9 15-pin to RJ-48, 5-15 loopback 15-pin connectors, 5-17 RJ-48 connectors, 5-16 straight-through, 5-10 15-pin, 5-19 RJ-48, 5-18 MCT1 loopback connectors 15-pin, 5-13 RJ-48, 5-14 media access unit (MAU), defined, 1-9 L local area network (LAN) cables Ethernet, 3-3 FDDI, 3-7 to 3-9 listed, 3-1 token ring, 3-4 to 3-6 Index-4 modem cable BLN, BLN-2, and BCN platforms only, 2-7 for all except BLN, BLN-2, and BCN platforms, 2-6 listed, 2-1 multistation access unit (MAU), defined, 1-9 308604-14.10 Rev 01 P specifications, cable, 1-11 pass-through cables 15-pin to female RS-232, 6-60 15-pin to female V.35, 6-61 15-pin to female X.21, 5-1 15-pin to RS-232, 6-23 15-pin to V.35, 6-24 15-pin to X.21, 6-4 44-pin to female RS-232, 6-62 44-pin to female V.35, 6-63 44-pin to RS-232, 6-39 44-pin to X.21, 6-6 50-pin to female RS-232, 6-65 50-pin to female V.35, 6-66 50-pin to X.21, 6-8 physical interface, 1-8 standard synchronous cables 15-pin to RS-232, 6-30 15-pin to RS-422, 6-34 15-pin to V.28, 6-31 15-pin to V.35, 6-20 15-pin to V.35 with DTR, 6-22 15-pin to X.21, 6-28 44-pin to RS-232, 6-38 44-pin to RS-422, 6-36 44-pin to V.28, 6-46 44-pin to V.35, 6-26 44-pin to X.21, 6-29 50-pin to V.28, 6-16 listed, 6-1 to 6-3 V.35 44-pin to 15-pin crossover, 6-44 V.35 44-pin to 44-pin crossover, 6-42 pins, defined, 1-8 standards, industry, 1-11 plug, defined, 1-8 straight-tip connector, defined, 1-9 product support, xvii support, Nortel Networks, xvii publications hard copy, xvii synchronous pass-through cables. See pass-through cables R T receptacle, defined, 1-8 T1 cables CSU DTE connection, 5-25 CSU network receptacle to RJ-45, 5-27 CSU network receptacle to spade terminals, 5-28 customer premises connection, 5-26 Framer, 5-25 to 5-27 listed, 5-1 multichannel clock, 5-11, 5-12 multichannel crossover, 5-15 multichannel loopback, 5-16, 5-17 multichannel straight-through, 5-18, 5-19 quad multichannel, 5-6 quad multichannel crossover, 5-9 quad multichannel straight-through, 5-10 recommended series (RS), defined, 1-9 registered jack (RJ), defined, 1-9 RS-422 cables 15-pin to, 6-34 44-pin to, 6-36 50-pin to, 6-52 RS-530 cable 15-pin to, 6-10 44-pin to, 6-12 50-pin to, 6-14 S technical publications, xvii SC duplex connector, defined, 1-9 technical support, xvii sockets, defined, 1-8 termination, defined, 1-8 software considerations, choice of cable, 1-2 terminology, 1-8 spade terminals, defined, 1-9 text conventions, xv special requirements, 1-1 token ring cables, 3-4 to 3-6 308604-14.10 Rev 01 Index-5 V V.28 cables 15-pin to, 6-31 44-pin synchronous to, 6-46 50-pin synchronous to, 6-16 V.28 interface, defined, 1-9 V.35 cables 15-pin synchronous with DTR, 6-22 15-pin to, 6-20, 6-24 15-pin to male, 6-17 44-pin to, 6-26 44-pin to male, 6-18 50-pin to, 6-48 V.35 interface, defined, 1-9 X X.21 (V.11) cables 15-pin to, 6-28 44-pin to, 6-29 50-pin to, 6-51 X.21 cables 15-pin to, 6-4 44-pin to, 6-6 44-pin to 15-pin cable adapter, 8-5 50-pin to, 6-8 X.21 interface, defined, 1-9 X3T9.5 PMD/FDDI cables FDDI FSD to FSD, 3-7 SC duplex to SC duplex, 3-9 SC duplex to straight-tip, 3-8 SC to straight-tip MMF, 3-10 Index-6 308604-14.10 Rev 01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1910:00:11 81:24:32 Producer : Acrobat Distiller 3.01 for Windows Creator : FrameMaker 5.5.6p145 Title : JAN 00, Cable Guide Subject : 308604-14.10 Rev 01 Modify Date : 2000:01:18 13:24:17 Page Count : 194 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools