Avaya Digital Mobility System Configuration Guide DM_InstallationGuide

2015-06-01

• North American Regulatory Information
  • Safety
  • Enhanced 911 Configuration
  • Radio-frequency Interference
  • Hearing Aid Compatibility
  • Repairs
  • Important Safety Instructions
    • Canada:
    • SAR:
  • Safety
• Limited Warranty
  • Exclusions
  • Warranty Repair Services
  • After Warranty Service
• Preface
  • Before you begin
  • DECT and DECT variants
    • DMC GAP compliance
    • Handset GAP compatibility
  • How to get help
  • Chapter overview
  • Acronyms
• Overview
  • Digital Mobility system diagram
  • General system information
    • Components of the system
      • Digital Mobility Controller (DMC)
      • Digital Mobility Base station (RFP)
      • Digital Mobility Repeater (WRFP)
      • Digital Mobility Handset/DECT Handset (PP)
      • Administration and maintenance tools
      • Description of connectors and their placement
      • System Status LEDs
      • System link (Secondary DMC)
      • Serial port
      • Base station connection
      • TCM loop connection
      • Power connection
• Installation overview
  • Installation process map
  • Host system setup requirements
  • Requirements for the digital mobility system
    • Digital Mobility Controller
      • Environmental checklist
      • Electrical requirements
      • Internal wiring requirements
    • Base stations and repeaters
      • Environmental checklist
      • Electrical requirements
    • Handsets
      • Environmental checklist
      • Electrical requirements
    • DMC OAM program and Digital Mobility Service Tool
      • Software requirements
      • Customer-supplied hardware requirements
  • Installation prerequisites
  • Installing DMC OAM and Digital Mobility Service Tool
  • Starting the DMC OAM program
    • Editing communications configurations
      • Creating a new communication configuration
      • Deleting a communication configuration
      • Changing a communication configuration
  • Starting the Digital Mobility Service Tool
    • Exiting the Digital Mobility Service Tool
  • Description of the DMC OAM program interface screen
    • DMC OAM program main window
    • Understanding the menu
    • Understanding tabbed pages
  • Description of the Digital Mobility Service Tool
    • Digital Mobility Service Tool main window
    • Understanding the menu
    • Understanding tabbed pages
  • Description of the Master handset interface
    • Master handset menu structure
    • Language settings for Master handset
• DMC installation
  • System equipment for the DMC
    • Basic hardware
    • Optional equipment
    • Equipment for installing the DMC
  • Install a DMC in an equipment rack
    • Install the rack mount tray in an equipment rack
    • Install a DMC on the rack mounting tray
      • Install a DMC directly on the rack mounting tray
      • Install a DMC on another DMC
  • Install a DMC on the wall
  • Install a DMC on a flat surface
  • Connecting DMC to host system (TCM loop)
    • TCM Loop connections
    • TCM input connector pinout
  • Next steps
• Repeater installation
  • Installing the repeater and external antenna
  • Programming a repeater with the programming kit
    • Content of the programming kit:
    • Set up of the hardware for repeater programming:
    • Programming the repeater with the Digital Mobility Service Tool
      • Downloading firmware
  • Description of LED behavior on repeater
  • Next step
• Base station installation
  • Positioning a base station
  • Installing the base stations
    • Installing a base station
    • Wiring the base station
    • Description of LED behavior on base station
  • Next step
• Preparing handset for use
  • Handset information
  • Battery information
  • Installing battery on 7420 handsets
  • Installing battery on 413X, 414X, 743X, and 744X handsets
  • Charging battery
  • Battery disposal
  • Reading serial number
    • Reading serial number on 7420 handsets
    • Reading serial number on 413X, 414X, 743X, and 744X handsets
  • Next step
• Configuring the DMC
  • Powering up the DMC
  • Connecting a computer to the DMC
    • Direct connection (serial connection) using a null-modem cable
    • Remote connection using a serial-IP converter or a modem
      • Serial-IP converter
      • Modem
  • Configuring the DMC through DMC OAM program
    • Change password
    • Suppression control
    • Subscription setting
    • Cable Delay Measurement
  • Configuring the DMC through the Master handset
    • Restart the DMC
    • Subscription setting
    • Cable delay measurement
      • To view the cable delay of an individual base station
  • Next step
• Handset registration and subscription
  • Register handsets through DMC OAM program
    • Setting up a Master handset
    • Registering handsets
  • Register handsets through Master handset
    • Setting up a Master handset (registering and subscribing)
    • Registration of additional handsets
      • First time registration of additional handsets through the Master handset
      • Registering handsets to existing system through Master handset
  • Subscribe handsets
    • Subscribing additional handsets and additional Master handsets
    • Subscribing a handset to different systems
      • Changing to another system automatically
      • Changing to another system manually
  • Host system and handset interoperability
    • Digital Mobility DN record settings
    • Handset features
      • Telephone settings
    • Idle display activation code
      • Features with three-second display timeouts
    • Handset system functions
    • DMC Feature List
• Handset management
  • Viewing handset/user configuration
    • Through DMC OAM program
    • Through Master handset
      • Viewing user configuration
  • Unsubscribing handsets
  • Removing handsets from the list (deregistering)
    • Deregistering handsets through DMC OAM program
    • Deregistering handsets through Master handset
      • Removing a directory number
      • Removing a position
  • Changing user settings
    • Through DMC OAM program
    • Through the Master handset
      • Changing position
      • Changing authentication code
      • Changing special rights
      • Changing TCM loop number
  • Downloading firmware
• System Management
  • Using the DMC OAM program
    • Registration
    • MSF Messages (Message Service Function)
      • Sending text messages from DMC to a handset
      • Receiving text messages from handset to DMC
    • Checking Status Information
      • How to set status message level
      • How to read status message level
      • How to save status messages
  • Using the Digital Mobility Service Tool
    • Repeater programming
    • Handset adjustment
      • Set up of the hardware for handset adjustment:
      • To adjust the handset from the Digital Mobility Service Tool:
  • Define and view system settings
    • System settings in the DMC OAM program
      • System Information
      • Change Password
      • Date and Time
      • Suppression Control
      • RFP PCS
      • Statistic
      • Measure Cable Delay
      • Voice Path Gain
      • PSTN Gain
      • DSP Tone Level
      • Restart the DMC
    • System settings in the Digital Mobility Service Tool
      • Connection Settings
    • System settings in the Master handset
      • Reading system information from a Master handset
      • Reading handset information from a Master handset
      • Reading base station information from a Master handset
      • Reading statistics from a Master handset
  • Advanced features
    • DMC OAM program
      • Status Message Level
      • Enter Command Mode
      • NVM (non-volatile memory)
      • Dump
      • RFP Slot Allocation
      • Load Flash (updating software)
    • Digital Mobility Service Tool
      • Download Flash
  • Saving configuration data
    • Save configuration data as a text file
    • Save configuration data as semicolon separated file
  • Troubleshooting error messages
    • DMC OAM program
    • Digital Mobility Service Tool
  • Should you need to report a problem
• Index