Avaya Dmm Build 1 00 Release Notes
2015-06-01
: Avaya Avaya-Dmm-Build-1-00-Release-Notes-736254 avaya-dmm-build-1-00-release-notes-736254 avaya pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
DMM build 1.0.0 Date: November 10, 2009 DMM Release Notes CONTENT HISTORY Date Build # Summary of Changes October 8, 2009 0.14 See CR list, updated Wizard, VM msg transfer, skillset support October 15, 2009 0.15 See CR List October 22, 2009 0.16 See CR List October 29, 2009 0.17 See CR List November 3, 2009 0.18 See CR List; NOTE: Data must be re-imported November 10, 2009 0.19 See CR List; NOTE: Data must be re-imported November 20, 2009 0.20 See CR List; NOTE: Data must be re-imported November 26,2009 1.0.0 See CR List; NOTE: Data must be re-imported Build Content Overview Build 1.0.0 contains fixes for: CR Q02087356 Title DMM showed alarm for failing to retrieve data of DNs as export Q02094930 Q02094951 Q02094872 The user should be able to choose to import/export voicemail messages DMM help button to include user guide doc DMM Model needs to have a version attribute Q02094915 Summarize contiguous warnings which occur across a range Q02094940 DMM option to save configuration as an excel report Nortel type Forecast fix Page 1 of 4 Open CRs: CR Q02057445 Title DMM does not export voicemail msgs, without EM keycode Q02066058 DMM Internal system CDR not migrated Q02067868 DMM internal Diagnostic settings defaulted Q02067869 DMM Internal CAP assignment not Exported Q02067870 Scheduled archlogs and Backup not Exported Q02067137 DMM can not stop import when connection is lost Q02081622 DMM – Doorphone target DN not set Q02073098 Apply can run without full Data Prep being done type E E E E E E E E Forecast fix Not in this release Not in this release Not in this release Not in this release Not in this release Not in this release Not in this release Not In This Release Other Notes DMM Testing Tip For anyone that is running multiple DMM tests (i.e. multiple times performing an extract and/or apply), please reboot your BCMs (BCM4.0 and BCM5.0) between tests since we have found some anomalies when consecutive tests were performed when a reboot was not done. Please ensure that the target BCM450 has the appropriate keycode allotment. Errors will be reported if the BCM450 rejects data due to keycode status for any application. Open Call Pilot issues: 1. If the line no longer exist or valid in BCM 5.0, the AA line administration will fail for that line. There is currently no work around. 2. BCM 4.0 bug missing DNS in voicemail. This may show that IP migration has not tested DNS migration. Constraints: Data import and export operations are out of service operations that require occasional reboots. The reboot operation is invoked by the tool, no user intervention required. Data import and export operations place a heavy CPU load on the BCM, no Element Manager connections should be active to the BCM Keycode files for the destination BCM 450 Release 5.0 system need to be installed. The Unified Messaging keycode is required to perform Voice Mail message migration. All MBMs should be installed on the BCM450 prior to performing the export operation Nortel Page 2 of 4 Keycode should be installed on the BCM450 prior to performing the export operation No FEM migration – too many combinations of cards and modules that the odds for error/failure is high Any MBM sitting in offset 3 (slot 4) on 4.0 can not be directly migrated to 5.0. It will need to be post-DMM configured by being pulled, DIPs changed, and then reinserted and Configured IP trunks to be configured + other physical trunks > 150 then a best fit algorithm will be used No IVR data Call Forward All attributes (for Sets) can only be migrated if the Sets are booted on the BCM450 When BRI modules share a bus with Loop type module (GATM, CTM, DID, etc.) in the BCM 4.0 system, the user will be required to manually add either the BRI module or the loop-type module during the Configure MBM phase of the Data Preparation Wizard. The user must also indicate the bus and offset to DMM before the data can be properly migrated. NEW FUNCTIONALITY Version 1.0.0 of DMM introduces the ability to save data to an Excel file in addition to the existing XCM file. To use this capability, press the following icon: Or Select File/Create Excel Report in the Menu The user is prompted to supply a file name to save the report to. An Excel report cannot be sourced into the tool. This feature is designed to allow users to save their data in a spreadsheet format. Software Version: DMM Release 5.0 version 1.0.0 DMM: S/W Distribution sites: Livelink: http://livelink2.ca.nortel.com/livelink/livelink.exe?func=ll&objId=44418374&objAction=browse&sort=na me&viewType=1 The load is also available via the Application Launcher. Use the following url: Nortel Page 3 of 4 http://bcm.sipsw.com/ApplicationLauncher Select “Data Migration Manager” in the Applications area and press the “Run” button DMM Bulletin Board: http://bcm.sipsw.com/ Smoke test results: See Livelink Folders Nortel Page 4 of 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Create Date : 2009:11:30 12:48:57-06:00 Modify Date : 2009:11:30 12:49:01-06:00 Source Modified : D:20091130184751 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : Acrobat PDFMaker 9.1 for Word Metadata Date : 2009:11:30 12:49:01-06:00 Producer : Acrobat Distiller 9.2.0 (Windows) Format : application/pdf Creator : Title : Document ID : uuid:6724f47f-7c6b-4dc4-a8d6-34fd7f5603a4 Instance ID : uuid:f2328bd9-efba-4f93-91a4-923201d1b1fb Subject : 2 Headline :EXIF Metadata provided by EXIF.toolsPage Layout : OneColumn Page Count : 4