Avaya Ip Phone 1120E Getting Started Manual
2015-06-01
: Avaya Avaya-Ip-Phone-1120E-Getting-Started-Manual-736669 avaya-ip-phone-1120e-getting-started-manual-736669 avaya pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Nortel IP Phone 1120E features • • • • • • • Four user-defined feature keys with labels and indicators Four soft keys Graphical, high-resolution LCD display, backlit, with adjustable contrast High-quality speaker phone Volume control keys for adjusting ringer, speaker, handset, and headset volume Six specialized feature keys: — Quit, Directory, Message/Inbox, Shift/Outbox, Services, Copy Six call-processing fixed keys: — Mute, Handsfree, Goodbye, Expand to PC, Headset, Hold Gigabit Ethernet ports Built-in gigabit Ethernet switch for shared PC access Headset jack with an On/Off key USB port to support a keyboard or mouse Automatic network configuration Hearing-aid compatibility Figure 1 Features and keys • • • • • • Regulatory Information User-defined feature keys Visual Alerter/Message Waiting indicator Feature Status Lamp* Handset High-resolution graphical display screen Soft keys Speaker Navigation keys Message/Inbox key Shift/Outbox key Directory key Copy key Services key Quit/Stop key Goodbye key Volume control Expand to PC key Headset key Mute key Handsfree key Hold key Dialpad Figure 2 Connectors *Note: If supported by your server, the Feature Status Lamp provides a user-defined alert. Contact your system administrator to find out if this feature is available for you. Nortel IP Phone 1120E Emissions Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio or TV technician for help. The user should not make changes or modifications not expressly approved by Nortel Networks. Any such changes could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with the essential requirements and other relevant provisions of R&TTE directive 1999/5/EC. A copy of the Declaration may be obtained from Nortel Networks GmbH address: Ingolstaedter Strasse 14-18, 80807 Munich Germany. Use only with Nortel-approved Limited Power Source (output rated 48 V DC, 520mA.) OR using Power over LAN options, including standard power over Ethernet. Warning: The earpiece/mouthpiece region on the handset can attract and retain small objects. Privacy of communications may not be ensured when using this telephone. To prevent radio interference to the licensed service, this device must be operated indoors only and should be kept away from windows to provide maximum shielding. IP Phone 1120E Getting Started Expansion module port* PC Ethernet port LAN Ethernet port Tilt lever Link lamp USB connector Date: January 2006 Document Release: Standard 5.00 Document Number: NN-10300-044 Copyright © Nortel Networks Limited 2006 All rights reserved. * Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks. AC adapter jack Headset jack Handset jack www.nortel.com www.nortel.com IP Phone 1120E installation Caution: Your IP Phone 1120E is shipped with the base locked in position. To avoid damaging your phone, press the wall-mount lever, located just under the Handsfree key as indicated in Figure 5, to release the base and pull it away from the phone. IP Phone 1120E installation IP Phone 1120E installation and controls Step 7: Install additional cables. If applicable, plug in optional USB devices. Connect the Ethernet cable to the LAN Ethernet connection. If you are using an AC power adapter, plug the adapter into an AC outlet. Install the screws so that they protrude 3 mm (1/8 inch) from the wall, and then install the phone stand mounting holes over the screw heads, as indicated in Figure 4 (Method A). You may need to remove the phone from the wall to adjust the lower screws. When the lower screws are snug, install the phone on the mounting screws, and then tighten the top screws. Method B: Attach the 15-cm (6-inch) CAT5e cable, position the stand over the mounting rivets, and slide the phone down the wall so that the rivets fit into the slots on the stand, indicated in Figure 4 (Method B). Step 9: Replace the stand cover. Ensure that all cables are neatly routed and press the stand cover into place until you hear a click Step 10: Put the phone in the wall-mount position (optional). If you wall-mounted your phone, put it in the wall-mount position by holding the Tilt Lever and pressing the phone towards the base until the phone is parallel with the base. Release the Tilt Lever and continue to push the phone towards the base until you hear an audible click. Ensure the phone is securely locked in position. Step 1: Remove the stand cover. Pull upward on the center catch as indicated in Figure 3, and remove the stand cover. The cable routing tracks are now accessible. A Tilt Lever Button Step 2: Connect the AC power adapter (optional). Connect the adapter to the AC adapter jack in the bottom of the phone. Form a small bend in the cable, and then thread the adapter cord through the channels in the stand. Warning: Use your IP Phone 1120E with the approved Nortel AC adapter (model #N0023000) for this model of phone only. Note 1: Your IP Phone 1120E supports both AC power and Power over Ethernet options, including IEEE 802.3af standard power. To use local AC power, the optional AC adapter can be ordered separately. To use Power over Ethernet, where power is delivered over the CAT5 cable, the LAN must support Power over Ethernet, and an AC adapter is not required. Note 2: You must use CAT-5e (or later) cables if you want to use gigabit Ethernet. Step 3: Install the handset. Connect the end of the handset cable with the short straight section into the handset. Connect the end of the handset cable with the long straight section to the back of the phone, using the RJ-9 handset jack marked with the symbol +. Form a small bend in the cable, and then thread the handset cord through the channels in the stand so that it exits behind the handset on the right side, in the Handset cord exit marked with the symbol + in the stand base, as shown in Figure 3. Step 4: Install the headset (optional). If you are installing a headset, plug the connector into the RJ-9 headset jack marked with the symbol ) on the back of the phone, and thread the headset cord along with the handset cord through the channels in the stand, so that the headset cord exits the channel marked with the symbol ). Step 5: Install the Ethernet cable. Connect one end of the supplied Ethernet cable to the back of your phone using the RJ-45 connector marked with the symbol %, and thread the network cable through the channel marked with the symbol %. Step 6: Install the Ethernet cable connecting the PC to the phone (optional). If you are connecting your PC Ethernet through the phone, connect one end of the PC Ethernet cable to your phone using the RJ-45 connector marked with the symbol (, and thread it through the channel marked with the symbol (. Connect the other end to the LAN connector on the back of your PC. Figure 4 Cable routing tracks Handset cord channel B IP Phone 1120E controls: Step 8: Wall-mount your phone (optional). Your IP Phone 1120E can be mounted either by: (Method A) using the mounting holes on the bottom of the phone stand, or (Method B) using a traditional-style wall-mount box with RJ-45 connector and 15-cm (6-inch) RJ-45 cord (not provided). Figure 5 Rotate the phone until the phone body is parallel to the stand Figure 3 Removing the stand cover Center Catch Tilt lever Wall-mount lever Complete steps 1-7, as needed, before you wall-mount your phone: Method A: Press the wall-mount lever, and pull the phone away from the stand, as shown in Figure 5. Using the stand cover (the part you removed in step 1), mark the wall-mount holes by pressing the bottom of the stand cover firmly against the wall in the location where you wish to install the phone. Four small pins on the bottom of the stand cover make marks on the wall. Use the marks as a guideline for installing the wall-mount screws (not provided). Controlling volume Press the up or down volume control key while using your handset, headset, or speaker to adjust the volume of the associated device. Answering a call Lift the handset to answer a ringing call, or press the Handsfree or Headset key. Making a call with the handset To make a call using the primary line, lift the handset and enter the phone number on the dialpad. If your phone is programmed with several line keys, press a line key to select a line before calling. When your call is complete, press the Goodbye key or return the handset to the cradle. Making a call with the headset or using Handsfree Press the Headset or Handsfree key. Enter the phone number. When your call is complete, press the Goodbye key. Using Hold and Mute While on a call, press the Hold key to place your caller on hold. Press the line key to retrieve your call. The icons next to the line keys indicate held lines, while the Mute LED lights when Mute is active. Press the Mute key to mute your handset, headset, or speaker, allowing you to speak privately. Press the Mute key again to speak with your caller. Setting the contrast To adjust the display contrast, press the Services key, select Telephone Options, and select Contrast Adjustment. Use the up/down arrow keys or up/down soft keys to change the setting. Setting the language To select the language used by the local menus, press the Services key twice quickly to open the local menu. Select 1. Preferences, select 2. Language, and use the up/down arrow keys to choose the language. Note: Use the Telephone Options menu to select the language used by call-server features. Consult the IP Phone 1120E User Guide for more information. www.nortel.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2004:11:22 09:59:42Z Author : Nortel Networks Modify Date : 2006:01:24 12:14:51 Page Mode : UseNone XMP Toolkit : 3.1-702 About : uuid:719077e5-f9ee-4dcf-a40d-e7cae06bf3c7 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : FrameMaker 7.1 Metadata Date : 2006:01:23 10:50:26-04:00 Document ID : uuid:d1933031-97df-41e2-9dfe-65a50ff35f8d Instance ID : uuid:b5846757-98c7-4705-b507-4d1f2ec90553 Format : application/pdf Title : IP Phone 1120E: Getting Started Creator : Nortel Networks Page Count : 2EXIF Metadata provided by EXIF.tools