Avaya Task Map Configuring Routers And Protocols Users Manual Feb 00,
2015-06-01
: Avaya Avaya-Task-Map-Configuring-Routers-And-Protocols-Users-Manual-734664 avaya-task-map-configuring-routers-and-protocols-users-manual-734664 avaya pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Part No. 308665-14.10 Rev 01 Task Map - Configuring Routers and Protocols Before you begin Read about new features, guidelines, known anomalies, and amendments to the documentation. • Release Notes for BayRS Version 14.10 • Release Notes for Site Manager Software Version 14.10 • BayRS, BCC, and Site Manager 14.10 Known Anomalies • BayRS, BCC, and Site Manager 14.10 Fixed Anomalies Installing and starting a new router Unpack, install, and start up the router. • lnstalling and Operating the Passport 5430 Multiservice Access Switch • Installing and Operating the Passport 2430 Router Securing a router As soon as you connect to the network, you should secure the router. • For an overview of security features, see Chapter 7 of Quick-Starting Routers. • For information about RADIUS, see Configuring RADIUS. • For information about IPsec, see Configuring IPsec Services. Configuring a router Use a router configuration tool to: 1. Enable and modify the router’s interfaces, circuits, protocols, and services. 2. Save the modified configuration as a test file (for example, test.cfg). 3. Boot the router with the test configuration file. 4. Verify that the new configuration works correctly. 5. Save the tested configuration as config, the router’s default configuration file. For more information, see the tool’s online Help and the following guides: • Using the Bay Command Console (BCC) - The BCC provides a command-line interface for configuration. • Configuring and Managing Routers with Site Manager - Site Manager provides a graphical user interface (GUI) for configuration. Managing a router For information about router management features available with your chosen application, see: • Configuring and Managing Routers with Site Manager • Using the Bay Command Console (BCC) • Using Technician Interface Software • Using Technician Interface Scripts • Writing Technician Interface Scripts • Managing Routers Using the HTTP Server Nortel Networks, Inc. 4401 Great America Parkway, Santa Clara, CA 95054 Part No. 308665-14.10 Rev 01 Accessing the MIB For information about accessing and changing MIB values, see: • Configuring and Managing Routers with Site Manager • Configuring SNMP, BootP, and DHCP Services • Using Technician Interface Software • Using Technician Interface Scripts Modifying router software For information about using the Image Builder to add or modify the router software image, see Configuring and Managing Routers with Site Manager. Reviewing events and traps • For a description of all router event messages and SNMP trap messages, go to either the event message database at http://support.baynetworks.com/ library/tpubs/events/ or the BayRS documentation CD. • For instructions on viewing and monitoring event and trap messages with Site Manager, see Configuring and Managing Routers with Site Manager and Configuring SNMP, BootP, and DHCP Services. • For instructions on viewing and monitoring event messages with the Technician Interface, see Using Technician Interface Software. • For instructions on using syslog services to capture and process router event messages on a UNIX-based network management platform, see Using the Bay Command Console (BCC). Filtering and prioritizing traffic Configuring Traffic Filters and Protocol Prioritization Displaying statistics • To display data link layer and network layer statistics, see Configuring and Managing Routers with Site Manager. • To display system statistics with the BCC show command, see Using the Bay Command Console (BCC). • To display statistics about IP services with the BCC show command, see Reference for BCC IP show Commands. • To display statistics about interfaces, services, or protocols other than IP, see the appropriate configuration guide. • To display statistics with the Technician Interface show command, see Using Technician Interface Scripts. Servicing router hardware Before beginning any procedure for servicing your router, note the safety guidelines in the following guides: • lnstalling and Operating the Passport 5430 Multiservice Access Switch • Installing and Operating the Passport 2430 Router Selecting cables Cable Guide Troubleshooting Troubleshooting Routers 2 Part No. 308665-14.10 Rev 01 Configuring Interfaces and Protocols The following guides describe network interfaces and protocols and their parameter settings. See these guides for instructions on setting parameter values with your chosen configuration tool. Site Manager and the BCC also have online Help with parameter information. Configuring interfaces Change the default settings for Ethernet, FDDI, and token ring lines. Configuring Ethernet, FDDI, and Token Ring Services Change the default settings for synchronous, asynchronous, DSU/CSU, E1, T1, FE1, FT1, HSSI, MCT1, and MCE1 lines. Configure multiline services. Configuring WAN Line Services Configuring WAN protocols • Create and modify dial-on-demand lines, pools, and circuits. • Create and modify dial backup lines, pools, and circuits. • Create and modify bandwidth-ondemand lines, pools, and circuits. Configuring Dial Services Enable and customize frame relay. Add, edit, group, or delete permanent virtual circuits (PVCs) and switched virtual circuits (SVCs). Configuring Frame Relay Services Enable and customize PPP and asynchronous PPP. Configuring PPP Services Enable and customize RADIUS for a router acting as a RADIUS client. Configuring RADIUS Enable and customize SMDS. Configuring SMDS Enable and customize X.25. Add, edit, or delete X.25 network service records. Configuring X.25 Services Enable and customize X.25 Gateway. Configuring X.25 Gateway Services 3 Part No. 308665-14.10 Rev 01 Configuring IP protocols and services IP routing protocols (ARP, OSPF, RARP, RIP) Configuring IP, ARP, RARP, RIP, and OSPF Services IP exterior gateway protocols (BGP and EGP) Configuring IP Exterior Gateway Protocols (BGP and EGP) GRE, NAT, RIPSO, and Blacker Front End Configuring GRE, NAT, RIPSO, and BFE Services IP Security (IPsec) Configuring IPsec Services IPv6 Configuring IPv6 Services IP multicasting protocols (DVMRP, IGMP, IGMP Relay, MOSPF, and PIM) Configuring IP Multicasting and Multimedia Services RSVP and the Resource Manager Configuring IP Multicasting and Multimedia Services DNS, FTP, NTP, TCP, Telnet, TFTP, NetBIOS over IP, IP accounting Configuring IP Utilities Differentiated services over IP Configuring Differentiated Services Configuring other network protocols and services 4 802.1Q tagging Configuring Ethernet, FDDI, and Token Ring Services AOT (polled asynchronous over TCP/IP) Configuring Polled AOT Transport Services AppleTalk Configuring AppleTalk Services APPN Configuring APPN Services ATM DXI Configuring ATM DXI Services ATM Half Bridge Configuring ATM Half-Bridge Services ATM UNI Configuring ATM Services Bisync over TCP/IP (BOT) Configuring BSC Transport Services BootP Configuring SNMP, BootP, and DHCP Services Bridging (transparent bridge, spanning tree, source routing, translation bridge) Configuring Bridging Services Common Open Policy Service (COPS) protocol Configuring Differentiated Services Data compression Configuring Data Compression Services DECnet Configuring DECnet Services Part No. 308665-14.10 Rev 01 Configuring other network protocols and services (continued) DHCP Configuring SNMP, BootP, and DHCP Services Dial VPN Configuring and Troubleshooting Bay Dial VPN Services DLSw Configuring DLSw Services Interface redundancy Configuring Interface and Router Redundancy IPX Configuring IPX Services L2TP Configuring L2TP Services LLC Configuring LLC Services LNM Configuring LNM Services Multiprotocol Label Switching (MPLS) Configuring MPLS Services Multi-Protocol over ATM (MPOA) Configuring MPOA and NHRP Services Next Hop Resolution Protocol (NHRP) Configuring MPOA and NHRP Services OSI Configuring OSI Services QLLC Configuring X.25 Services RARP Configuring IP, ARP, RARP, RIP, and OSPF Services Router redundancy Configuring Interface and Router Redundancy SDLC Configuring SDLC Services SNMP Configuring SNMP, BootP, and DHCP Services Target ID Address Resolution Protocol (TARP) Configuring OSI Services VINES Configuring VINES Services Virtual Router Redundancy Protocol (VRRP) Configuring VRRP Services XNS Configuring XNS Services 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 1910:00:20 11:05:83 Producer : Acrobat Distiller 3.01 for Windows Author : Creator : Adobe Illustrator(TM) 7.0 Title : Feb 00, Task Map- Configuring Routers and Protocols Subject : 308665-14.10 Rev 01 Modify Date : 2000:02:01 14:18:44 Page Count : 6EXIF Metadata provided by EXIF.tools