Avaya Task Map Configuring Routers And Protocols Users Manual Feb 00,

: Avaya Avaya-Task-Map-Configuring-Routers-And-Protocols-Users-Manual-734664 avaya-task-map-configuring-routers-and-protocols-users-manual-734664 avaya pdf

Open the PDF directly: View PDF .
Page Count: 6

Part No. 308665-14.10 Rev 01

Task Map - Configuring Routers and Protocols

Nortel Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

Before you begin Read about new features, guidelines, known anomalies, and amendments to the

documentation.

•

Release Notes for BayRS Version 14.10

• Release Notes for Site Manager Software Version 14.10

• BayRS, BCC, and Site Manager 14.10 Known Anomalies

• BayRS, BCC, and Site Manager 14.10 Fixed Anomalies

Installing and

starting

a new router

Unpack, install, and start up the router.

•

lnstalling and Operating the Passport 5430 Multiservice Access Switch

•

Installing and Operating the Passport 2430 Router

Securing a router As soon as you connect to the network, you should secure the router.

• For an overview of security features, see Chapter 7 of

Quick-Starting Routers.

• For information about RADIUS, see

Configuring RADIUS

.

• For information about IPsec, see

Configuring IPsec Services

.

Configuring

a router

Use a router configuration tool to:

1. Enable and modify the router’s interfaces, circuits, protocols, and services.

2. Save the modified configuration as a test file (for example,

test.cfg

).

3. Boot the router with the test configuration file.

4. Verify that the new configuration works correctly.

5. Save the tested configuration as

config

, the router’s default configuration file.

For more information, see the tool’s online Help and the following guides:

•

Using the Bay Command Console (BCC)

- The BCC provides a

command-line interface for configuration.

•

Configuring and Managing Routers with Site Manager -

Site Manager

provides a graphical user interface (GUI) for configuration.

Managing

a router

For information about router management features available with your chosen

application, see:

• Configuring and Managing Routers with Site Manager

•

Using the Bay Command Console (BCC)

•

Using Technician Interface Software

•

Using Technician Interface Scripts

•

Writing Technician Interface Scripts

•

Managing Routers Using the HTTP Server

Part No. 308665-14.10 Rev 01

2

Accessing

the MIB

For information about accessing and changing MIB values, see:

• Configuring and Managing Routers with Site Manager

•

Configuring SNMP, BootP, and DHCP Services

•

Using Technician Interface Software

•

Using Technician Interface Scripts

Modifying router

software

For information about using the Image Builder to add or modify the router

software image, see

Configuring and Managing Routers with Site Manager.

Reviewing events

and traps

• For a description of all router event messages and SNMP trap messages, go

to either the event message database at

http://support.baynetworks.com/

library/tpubs/events/

or the BayRS documentation CD.

• For instructions on viewing and monitoring event and trap messages with Site

Manager, see

Configuring and Managing Routers with Site Manager

and

Configuring SNMP, BootP, and DHCP Services

.

• For instructions on viewing and monitoring event messages with the

Technician Interface, see

Using Technician Interface Software.

• For instructions on using syslog services to capture and process router event

messages on a UNIX-based network management platform, see

Using the Bay Command Console (BCC)

.

Filtering and

prioritizing traffic

Configuring Traffic Filters and Protocol Prioritization

Displaying

statistics

• To display data link layer and network layer statistics, see

Configuring and

Managing Routers with Site Manager

.

• To display system statistics with the BCC show command, see

Using the Bay

Command Console (BCC)

.

• To display statistics about IP services with the BCC show command, see

Reference for BCC IP show Commands

.

• To display statistics about interfaces, services, or protocols other than IP, see

the appropriate configuration guide.

• To display statistics with the Technician Interface show command, see

Using

Technician Interface Scripts

.

Servicing router

hardware

Before beginning any procedure for servicing your router, note the safety

guidelines in the following guides:

•

lnstalling and Operating the Passport 5430 Multiservice Access Switch

•

Installing and Operating the Passport 2430 Router

Selecting cables

Cable Guide

Troubleshooting

Troubleshooting Routers

Part No. 308665-14.10 Rev 01

3

Configuring Interfaces and Protocols

The following guides describe network interfaces and protocols and their parameter settings. See

these guides for instructions on setting parameter values with your chosen configuration tool. Site

Manager and the BCC also have online Help with parameter information.

Configuring interfaces

Change the default settings for Ethernet,

FDDI, and token ring lines.

Configuring Ethernet, FDDI, and Token Ring Services

Change the default settings for

synchronous, asynchronous, DSU/CSU,

E1, T1, FE1, FT1, HSSI, MCT1, and MCE1

lines. Configure multiline services.

Configuring WAN Line Services

Configuring WAN protocols

• Create and modify dial-on-demand

lines, pools, and circuits.

• Create and modify dial backup lines,

pools, and circuits.

• Create and modify bandwidth-on-

demand lines, pools, and circuits.

Configuring Dial Services

Enable and customize frame relay.

Add, edit, group, or delete permanent

virtual circuits (PVCs) and switched virtual

circuits (SVCs).

Configuring Frame Relay Services

Enable and customize PPP and

asynchronous PPP.

Configuring PPP Services

Enable and customize RADIUS for a router

acting as a RADIUS client.

Configuring RADIUS

Enable and customize SMDS.

Configuring SMDS

Enable and customize X.25. Add, edit, or

delete X.25 network service records.

Configuring X.25 Services

Enable and customize X.25 Gateway.

Configuring X.25 Gateway Services

Part No. 308665-14.10 Rev 01

4

Configuring IP protocols and services

IP routing protocols

(ARP, OSPF, RARP, RIP)

Configuring IP, ARP, RARP, RIP, and OSPF Services

IP exterior gateway protocols

(BGP and EGP)

Configuring IP Exterior Gateway Protocols

(BGP and EGP)

GRE, NAT, RIPSO, and Blacker Front End

Configuring GRE, NAT, RIPSO, and BFE Services

IP Security (IPsec)

Configuring IPsec Services

IPv6

Configuring IPv6 Services

IP multicasting protocols (DVMRP, IGMP,

IGMP Relay, MOSPF, and PIM)

Configuring IP Multicasting and Multimedia Services

RSVP and the Resource Manager

Configuring IP Multicasting and Multimedia Services

DNS, FTP, NTP, TCP, Telnet, TFTP,

NetBIOS over IP, IP accounting

Configuring IP Utilities

Differentiated services over IP

Configuring Differentiated Services

Configuring other network protocols and services

802.1Q tagging

Configuring Ethernet, FDDI, and Token Ring Services

AOT (polled asynchronous over TCP/IP)

Configuring Polled AOT Transport Services

AppleTalk

Configuring AppleTalk Services

APPN

Configuring APPN Services

ATM DXI

Configuring ATM DXI Services

ATM Half Bridge

Configuring ATM Half-Bridge Services

ATM UNI

Configuring ATM Services

Bisync over TCP/IP (BOT)

Configuring BSC Transport Services

BootP

Configuring SNMP, BootP, and DHCP Services

Bridging (transparent bridge, spanning

tree, source routing, translation bridge)

Configuring Bridging Services

Common Open Policy Service (COPS)

protocol

Configuring Differentiated Services

Data compression

Configuring Data Compression Services

DECnet

Configuring DECnet Services

Part No. 308665-14.10 Rev 01

5

Configuring other network protocols and services

(continued)

DHCP

Configuring SNMP, BootP, and DHCP Services

Dial VPN

Configuring and Troubleshooting Bay Dial VPN

Services

DLSw

Configuring DLSw Services

Interface redundancy

Configuring Interface and Router Redundancy

IPX

Configuring IPX Services

L2TP

Configuring L2TP Services

LLC

Configuring LLC Services

LNM

Configuring LNM Services

Multiprotocol Label Switching (MPLS)

Configuring MPLS Services

Multi-Protocol over ATM (MPOA)

Configuring MPOA and NHRP Services

Next Hop Resolution Protocol (NHRP)

Configuring MPOA and NHRP Services

OSI

Configuring OSI Services

QLLC

Configuring X.25 Services

RARP

Configuring IP, ARP, RARP, RIP, and OSPF Services

Router redundancy

Configuring Interface and Router Redundancy

SDLC

Configuring SDLC Services

SNMP

Configuring SNMP, BootP, and DHCP Services

Target ID Address Resolution Protocol

(TARP)

Configuring OSI Services

VINES

Configuring VINES Services

Virtual Router Redundancy Protocol

(VRRP)

Configuring VRRP Services

XNS

Configuring XNS Services