Avery Dennison Retail Information Services SDCCF20G Summit WLAN radio Module User Manual Summit Data Communications

Download:
Mirror Download [FCC.gov]
Document ID	1211294
Application ID	vPhPOXiVRLihJmCIFCHLyA==
Document Description	Module User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.92kB (386554 bits)
Date Submitted	2009-12-09 00:00:00
Date Available	2009-12-09 00:00:00
Creation Date	2008-06-17 15:19:01
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-06-17 15:19:18
Document Title	Summit Data Communications
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	cisco

Quick Start Guide for Summit Data Communications Radios
Summit Data Communications, Inc.
Quick Start Guide
For a Summit radio card or module with version 2.01 of software for
Windows CE or Windows Mobile
June 2008
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
Overview
Thank you for choosing one of the following products from
Summit Data Communications, Inc.:
• SDC-CF10G 802.11g compact flash radio module with
antenna connectors
• SDC-CF20G 802.11g compact flash radio card with
integrated antennas
• SDC-PC10G 802.11g PCMCIA radio module with
antenna connectors
• SDC-PC20G 802.11g PCMCIA radio card with
integrated antennas
• SDC-CF10AG 802.11a/g compact flash radio module
with antenna connectors
• SDC-PC10AG 802.11a/g PCMCIA radio module with
antenna connectors
SDC-CF10G
SDC-CF20G
(If you are using the SDC-MCF10G miniature compact
flash radio module with antenna connectors, contact
Summit for hardware installation information and
assistance. The software is the same as for other Summit
products.)
When you install and use your Summit radio module or
card in a computing device, that device can communicate to
a computing network using the IEEE 802.11 protocols that
the Summit radio supports:
• G radio: 802.11b and 802.11g
• AG radio: 802.11a, 802.11b, and 802.11g
SDC-PC10G
SDC-PC20G
For details on the capabilities of Summit products, go to:
http://www.summitdatacom.com/products.htm.
The software that Summit provides for its radios runs on
the computing device that houses a radio. That software
includes:
• A device driver
SDC-CF10AG
SDC-PC10AG
• An integrated IEEE 802.1X supplicant, which supports
the highest level of standards-based wireless LAN (WLAN) security with a broad range of options
• The Summit Client Utility (SCU), a configuration, monitoring, and management application designed
for Summit radio modules
• A service that displays a Windows System Tray icon that provides a visual status for the Summit
radio and enables the user to launch SCU by tapping the icon
V2.01 of Summit software runs on the following operating systems:
• Windows CE .NET 4.2, 5.0, and 6.0
• Windows Mobile 2003, 5.0, 6, and 6.1
Your Summit radio module is Wi-Fi CERTIFIED® and certified for Cisco Compatible Extensions (CCX):
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
•
•
Wi-Fi: The Wi-Fi Alliance certifies that Summit radio modules support 802.11b and 802.11g with
WPA and WPA2, both Personal and Enterprise. The tested EAP type was PEAP-MSCHAPv2. For
details, visit the Wi-Fi Alliance Web site at http://www.wi-fi.com, click on the “Wi-Fi CERTIFIED®
Products” link, and search for Summit Data Communications.
CCX: Summit radio modules are certified to Version 4 of the CCX specification for applicationspecific devices (ASDs). For an overview of CCX, go to
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_concept_home.html. For details on
the features in CCX V4 for ASDs, go to
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml.
Getting Started
Before you can use a Summit radio, you or your device manufacturer must install Summit software and
the radio in your computing device. If you are doing the software and hardware installation, then you will
need the following:
• A mobile computing device:
- With a compact flash (CF) Type I or Type II slot or a PCMCIA (PC Card) Type II slot
- That runs one of the operating systems listed on page 1
• Summit software, which is available from the organization from which you purchased your Summit
radio
• A Summit radio module or radio card
• For a 10G Series radio module, one or two antennas, each with a cable that is fitted with a Hirose
U.FL connector that can be attached to an antenna connector on the radio module
• For a 10AG Series radio module, two or four antennas, each with a cable that is fitted with a Hirose
U.FL connector that can be attached to an antenna connector on the radio module
You will perform the following four steps:
1. Install the Summit software on your mobile computing device.
2. Install the radio module or radio card in your device.
3. Configure the manner of obtaining an IP address.
4. Configure the radio to connect to your wireless network.
It is recommended that you install the software before you install the hardware. If you insert the card in
your device before you install the software, then the "Found New Hardware Wizard" screen will appear,
and you must select "Cancel" to cancel the Hardware Wizard.
Step 1: Install the Summit Software
Summit software is in a .cab file, which is the software equivalent of a “file cabinet”. A Summit .cab file
contains all software components, including the device driver and the Summit Client Utility (SCU). To
install the Summit software, perform these tasks:
• Download the appropriate .cab file for the operating system and processor of your device. You can
obtain your device’s operating system and processor from the system information under Windows
Control Panel (Tap Start, then Settings, and then System or Control Panel)
- Pocket PC or Windows Mobile: Select a .cab file with a name that begins with “mobile”.
- Windows CE .NET: Select a .cab file with a name that begins with “sdc_armv4i”.
• Copy the file to your device using a supported file transfer mechanism. Common methods of moving
the file include:
- Place the file on a supported Compact Flash or SD memory card and use that card for copying the
file to the device.
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
•
•
•
- Use a program such as FTP or Microsoft ActiveSync.
On the device, use the resident File Explorer program to locate the .cab file.
Run the .cab file by single-clicking the file or by right-clicking and selecting “run”.
If asked to replace any existing files on the device, answer “Yes to all”.
Step 2: Install the Radio in the Host Device
Once you have installed the Summit software, you must install the Summit radio module or card into a
CF or PCMCIA slot. Instructions on installing a Summit radio module in an internal slot (within a
device) are available only to device manufacturers.
To install a 20G Series radio card, simply insert the card in an external card slot. To install a 10G Series
or 10AG Series radio module in an external slot, you must complete two types of connections:
• Module to device: When you slide the radio module into a CF or PCMCIA external slot, a connector
on the end of the module mates with a connector in the slot.
• Antenna(s) to module: To connect antennas to the radio module, for each antenna you use an antenna
cable that mates with the antenna on one end and with the radio module’s U.FL connector on the
other end.
The standard approach is to install the module in the device first and then connect the antenna(s). If the
antenna connectors on the radio are not visible when the radio is inserted, however, then you will need to
connect the antenna(s) before installing the radio in the external slot. To connect the antennas, follow the
instructions below for your module:
10G module: There are two antenna connectors. If you
have a single antenna, then connect it to the main
antenna connector, which is located to the right of the
auxiliary connector, and set the Rx Diversity and Tx
Diversity global settings to Main Only (see the user’s
guide). If you have two antennas for diversity, then
connect the primary antenna to the main antenna
connector and the secondary antenna to the auxiliary
antenna connector, which is located to the left of the
main connector.
10AG module: There are four antenna connectors, two for the 5 GHz
(802.11a) band and two for the 2.4 GHz (802.11b and 802.11g) band,
with the 2.4 GHz connectors located to the right of the 5 GHz
connectors. If you have a single antenna for each band, then connect it
to the main antenna connector for each band, which is located to the
right of the auxiliary connector, and set the Rx Diversity and Tx
Diversity global settings to Main Only (see the user’s guide). If you
have two antennas for each band for diversity, then in each band
connect the primary antenna to the main antenna connector and the
secondary antenna to the auxiliary antenna connector.
Step 3: Configure the Manner of Obtaining an IP Address
To configure how your device will obtain an IP address on Windows CE or Windows Mobile, perform
the following tasks:
• Select Programs, then Settings, then the Connections tab at the bottom of the Settings screen
• Select Connections and then Advanced
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
•
•
•
On the Advanced Connections screen, select the Network Card button and then select the Summit
WLAN Adapter from the list of available network devices
On the screen that appears, choose that a server will assign an IP address (using DHCP) or enter a
specific IP address
If you select the Name Servers tab, you can statically configure DNS servers, but if you use DHCP
for IP address assignment then DNS usually is supplied by the same server that hands out IP
addresses
Step 4: Configure the Radio for Your Wireless Network
You can configure radio and security settings, monitor performance and activity, and troubleshoot issues
with the radio module using any of the following:
• The Summit Client Utility, or SCU
• Another application, such as Wavelink Avalanche, that uses the SCU software developer’s kit (SDK)
• Native facilities in the operating system, such as Windows Zero Config, or WZC
To run SCU, do the following:
• From the Start menu, select Programs, then select the directory called Summit
• Locate the SCU icon and double-click it
To configure the radio for your wireless network, you:
• Use the Admin Login button on the Main window to authenticate as an administrator (default
password: SUMMIT)
• Create a profile on the Profile window, specifying all important parameters such as SSID,
authentication method, and encryption type
• Save the profile using the Commit button
To connect to your wireless network, go to the Main window and select the profile that you created.
For details on how to create and use SCU profiles and perform other tasks with SCU, consult the next
section.
Using the Summit Client Utility
SCU is an application designed for end users and administrators of mobile devices that use a Summit
radio module. Using SCU, an end user can:
• Disable the radio (turn it off) and enable the radio (turn it on)
• View the contents of configuration profiles, or profiles, each of which houses the RF, security, and
other settings for the radio
• Select the profile to be used to connect to a WLAN
• View global settings, which apply to every profile
• View status information on the radio, the access point (AP) or WLAN router to which it is connected,
and the RF connection or link between the two
• View in-depth diagnostic information on the connection and the radio, and perform various
troubleshooting and diagnostic tests
After completing an administrator login to the utility, a user can perform these additional tasks:
• Create, rename, edit, and delete profiles
• Alter global settings, which apply to every profile
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
SCU provides a graphical user interface for access to all of its functions. Access to these functions also is
available through an SDK that an application programmer can use to enable another utility to manage the
radio.
To initialize SCU:
• From the Start menu, select Programs.
• Select the directory called Summit.
• Inside the Summit directory are two items: a directory for the storage of security certificates and an
SCU icon. To run SCU, double-click the SCU icon.
SCU has five windows: Main, Profile, Status, and Diags (or Troubleshooting), and Global. Tabs, which
typically appear at the bottom of the window (as shown in Figure 1), enable easy navigation between
windows. Each window is described in more detail in this section.
Main Window
Figure 1 below shows two examples of a Main window:
Figure1: Main window, with and without automatic profile selection active
Here are the highlights:
• Admin Login/Logout: To login to SCU as an administrator, you select this button when “Admin
Login” is displayed and supply the correct admin password on the dialog box. The default password
is “SUMMIT” in all capital letters. (The password can be changed through the Admin Password
function on the Global window.) Once you are logged in as an administrator, clicking the button
again logs you out as an administrator, leaving you with access only to end-user functions.
• Enable/Disable Radio: When the radio is enabled, selecting this button disables it; when the radio is
disabled, selecting this button enables it.
• Active Profile: You can view the name of the active profile and, using the selection list, select a
different profile. If you select “ThirdPartyConfig” then, after the device goes through a power cycle,
WZC is used for configuration of the radio.
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
•
•
•
•
•
•
•
Status: Indicates the radio’s status.
Radio Type: Indicates the type of radio in the device. “BG” means a Summit radio that supports
802.11b and 802.11g.
Reg. Domain: Indicates the regulatory domain for which the radio is configured. “WorldWide”
means that the radio can be used in any domain. The domain cannot be configured by an
administrator or user.
Auto Profile: Enables the user to activate or deactivate an automatic profile selection facility. The
facility uses a list of profiles that the user creates by tapping the List button and using a dialog box to
select from among created profiles. When the facility is active and the Summit radio makes its first
attempt (after a device startup or resume) to associate to an AP, SCU runs through the list and tries
each profile, one after the other, until the Summit radio associates to an AP using the values in a
profile.
Driver: Indicates the version of the device driver that is running on the device.
SCU: Indicates the version of SCU that is running on the device.
About SCU: When tapped, supplies information on SCU that on a Windows application normally
would appear under Help | About.
Profile Window
Profile settings are radio and security settings that are stored in the registry as part of a configuration
profile. When a profile is selected as the active profile on the Main window, the settings for that profile
become active. An administrator can define up to 20 profiles, edit them, and delete them on the Profile
window in SCU. Profile changes made on the window are saved to the profile only when the Commit
button is pressed.
Figure 2: Profile window
Unless it is modified, the Default profile does not specify an SSID, EAP type, or method of encryption. If
the Default profile is the active profile, then the radio will associate only to an access point that
broadcasts its SSID and requires no EAP type and no encryption.
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
Figure 2 on the previous page is an example of a Profile window. Here are the highlights:
• Edit Profile: This is used to select the profile to be viewed or, if you are an administrator, edited.
• Actions: Four actions are available, with the first three available only to an administrator:
- New: Create a new profile with default settings and give it a unique name (and then change
settings using other selections on the window).
- Rename: Give the profile a new name, one that is not assigned to another profile.
- Delete: Delete the profile, provided that it is not the active profile.
- Scan: Open a window that lists access points that are broadcasting their SSIDs. Each time you
tap the Refresh button, you view an updated list of APs, with each row showing an AP’s SSID, its
received signal strength indication (RSSI), and whether or not data encryption is in use (true or
false). You can sort the list by clicking on the column headers. If you are authorized as an
administrator, select an SSID in the list, tap Configure, and tap “Yes” on the dialog box, then
SCU will create a profile for that SSID and enable you to edit that profile.
• Radio: Radio attributes in the list box can be selected individually. When an attribute is selected, the
current setting or an appropriate selection box with the current setting highlighted appears on the
right.
• Security: Values for the two primary security attributes, EAP type and encryption type, are displayed
in separate dropdown lists, with the current values highlighted. When you as an administrator select
an EAP type, the Credentials button appears; when you tap it, a dialog box appears that enables you
to define authentication credentials for that EAP type. When you as an administrator select an
encryption type that requires the definition of WEP keys or a pre-shared key, the PSKs/WEP Keys
button appears; when you tap it, a dialog box appears that enables you to define WEP keys or a PSK.
• Commit: To ensure that changes to profile settings made on the window are saved in the profile, you
must tap the Commit button.
To cause a Summit radio to connect to a typical business WLAN, you must select a profile that specifies
the SSID, EAP type, and encryption type supported by the WLAN:
• SSID: This is the name or identification of the WLAN.
• EAP type: This is the protocol used to authenticate the device and its user if the WLAN uses the
Enterprise version of Wi-Fi Protected Access (WPA) and WPA2. SCU supports five EAP types:
PEAP with EAP-MSCHAP (PEAP-MSCHAP), PEAP with EAP-GTC (PEAP-GTC), EAP-TLS,
LEAP, and EAP-FAST
• Encryption: This specifies the type of key used to encrypt and decrypt transmitted data and how that
key is specified or derived. Encryption options include:
- WPA2 or WPA with dynamic keys (derived from the EAP authentication process)
- WPA2 or WPA with pre-shared keys
- Static WEP keys
Consult the user’s guide for details on all profile settings, including security settings.
Status Window
The Status window provides status information on the radio. A sample Status window is shown in Figure
3 on the next page:
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
Figure 3: Status window
Here are the highlights:
• Active profile
• Radio’s status: Down (not recognized), Disabled, Not Associated, Associated, or [EAP type]
Authenticated
• Client info: Name, IP address, and MAC address
• AP info: Name, IP address, MAC address, beacon period, and DTIM interval
• Connection info: Channel, data rate, transmit power, signal strength, and signal quality
Diags Window
A sample Diags, or troubleshooting, window is shown in Figure 4 on the next page. Here are the
functions available on the Diags window:
• (Re)connect: Disable and enable the radio, apply or reapply the current profile, and attempt to
associate and authenticate to the wireless LAN, logging all activity in the output area at the bottom.
• Release/Renew: Obtain a new IP address through DHCP release/renew, and log all activity in the
output area at the bottom.
• Start Ping: Start a continuous ping to the address in the edit box next to it. Once the button is clicked,
its name and function will change to Stop Ping. Moving to an SCU window other than Status or
Diags also will stop the ping, as will Pings will continue until you tap the Stop Ping button, move to
an SCU window other than Diags or Status, exit SCU, or remove the radio.
• Diagnostics: Attempt to (re)connect to an AP, and provide a more thorough dump of data than is
obtained with (Re)connect. The dump will include radio state, profile settings, global settings, and a
BSSID list of APs in the area.
• Save To...: Save the diagnostics output to a file.
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
Figure 4: Diags window, with ping active
Global Window
Global settings include:
• Radio and security settings that apply to all profiles
• Settings that apply to SCU itself
An administrator can define and change most global settings on the Global window in SCU. A sample
Global window is shown in Figure 5 below:
Figure 5: Global window
Summit Data Communications, Inc.
Quick Start Guide for Summit Data Communications Radios
The default setting for each global setting ensures reliable operation in most environments. Consult the
user’s guide for details on all global settings.
Summit Data Communications, Inc.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Company                         : 
Source Modified                 : D:20080617191742
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Modify Date                     : 2008:06:17 15:19:18-04:00
Create Date                     : 2008:06:17 15:19:01-04:00
Metadata Date                   : 2008:06:17 15:19:18-04:00
Document ID                     : uuid:b01015e2-5826-4d64-8d04-359cf88414e1
Instance ID                     : uuid:923d61ba-714d-4887-955c-5c4bcbd5c676
Subject                         : 5
Format                          : application/pdf
Creator                         : cisco
Title                           : Summit Data Communications
Page Count                      : 11
Page Layout                     : OneColumn
Author                          : cisco

EXIF Metadata provided by EXIF.tools