Aviat Networks MDR2400-EHD User Manual additional page to users manual
Aviat Networks additional page to users manual
Contents
- 1. Users Manual + Compliance statement
- 2. Users Manual
- 3. Users Manual Pages twenty four to fourty two
- 4. Users Manual pages fourty three to fifty three
- 5. Users Manual pages fifty two to sixty one
- 6. Users Manual pages sixty two tho sixty nine
- 7. revised user manual page one
- 8. additional page to users manual
- 9. Updated users manual
- 10. Revised user manual
additional page to users manual
µLink System Manual 862-01545 Outdoor Unit Power Levels Follow these steps to set the transmitted power level on the OU. Refer to table 4 for transmitted power levels. Step 1. 2. Action Determine the gain of the antenna, AT, to be installed with the OU. Calculate the transmitted power, PT, according to the following formula: PT = 30dBm – (AT – 6)/3 dBm 3. 4. 5. 6. Determine the power level to be used in NMS by consulting table 4. Install a fixed attenuator between the OU and the antenna if the power level can not be sufficiently reduced. Set the transmitted power level in NMS. Repeat for both stations. Example: Determining the transmitted power level. Step Action 1. Install a 24dBi antenna. 2. Transmitted power level to be used is: PT = 30 dBm – (24-6)/3 dBm = 30 dBm – 6 dBm = 24 dBm 3. 4. Issue 1 Power level 5 corresponds to 24 dBm transmitted power (from table 4). Ste the power level to level 5 in NMS. Page 26.1 µLink System Manual 862-01545 Table 1. Transmitted Power Level Setting NMS Power Transmitted Power (dBm) Level Setting 20 21 22 23 24 25 26 Page 26.2 Issue 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:05:17 10:26:56 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:05:17 10:26:57-04:00 Page Count : 2EXIF Metadata provided by EXIF.tools