Aviat Networks MDR2400-EHD User Manual additional page to users manual

Aviat Networks additional page to users manual

additional page to users manual

862-01545 µLink System ManualIssue 1 Page 26.1Outdoor UnitPower LevelsFollow these steps to set the transmitted power level onthe OU. Refer to table 4 for transmitted power levels.Step Action1. Determine the gain of the antenna, AT, to beinstalled with the OU.2. Calculate the transmitted power, PT, accordingto the following formula:PT = 30dBm – (AT – 6)/3 dBm3. Determine the power level to be used in NMSby consulting table 4.4. Install a fixed attenuator between the OU andthe antenna if the power level can not besufficiently reduced.5. Set the transmitted power level in NMS.6. Repeat for both stations.Example: Determining the transmitted power level.Step Action1. Install a 24dBi antenna.2. Transmitted power level to be used is:PT = 30 dBm – (24-6)/3 dBm = 30 dBm – 6 dBm = 24 dBm3. Power level 5 corresponds to 24 dBmtransmitted power (from table 4).4. Ste the power level to level 5 in NMS.
µLink System Manual 862-01545Page 26.2 Issue 1Table 1. Transmitted Power Level SettingNMS PowerLevel Setting Transmitted Power (dBm)120221322423524625726

Navigation menu