Axesstel PX120N Fixed Wireless Phone CDMA User Manual

Axesstel Inc Fixed Wireless Phone CDMA

User Manual

Axesstel Fixed Wireless Phone CDMA PX120N User Manual
CDMA FWP PX120N INDEX 1 GENERAL INTRODUCTION .......................................................................................................... 1 2 IMPORTANT INFORMATION ........................................................................................................ 2 3 PRODUCT OVERVIEW .................................................................................................................. 3 3.1 PACKING LIST ........................................................................................................................................ 3 3.2 PRODUCT INTRODUCTION ...................................................................................................................... 3 3.2.1 Appearance ....................................................................................................................................... 3 3.2.2 Key Definition ................................................................................................................................... 4 3.2.3 Display Icon ...................................................................................................................................... 5 4 BASIC OPERATIONS .................................................................................................................... 5 4.1 INSTALLING UIM CARD ......................................................................................................................... 5 4.2 POWER ON/OFF ..................................................................................................................................... 5 4.3 MAKE A CALL ........................................................................................................................................ 6 4.4 ANSWER A CALL .................................................................................................................................... 6 4.5 END A CALL ........................................................................................................................................... 6 5 MAIN MENU ................................................................................................................................... 7 6 MESSAGES .................................................................................................................................... 7 6.1 SEND A MESSAGE .................................................................................................................................. 7 6.2 RECEIVE A MESSAGE ............................................................................................................................. 8 6.3 VIEW OUTBOX ....................................................................................................................................... 9 6.4 DRAFTS .................................................................................................................................................. 9 6.5 VOICE MAIL ........................................................................................................................................... 9 6.6 TEMPLATE MESSAGE ............................................................................................................................. 9 6.7 DELETE MESSAGES ................................................................................................................................ 9 6.8 MEMORY STATUS ................................................................................................................................ 10 6.9 MESSAGE SETTINGS ............................................................................................................................. 10 7 CALL LOG .................................................................................................................................... 10 7.1 MISSED CALLS ..................................................................................................................................... 10 7.2 RECEIVED CALLS ................................................................................................................................. 11 7.3 DIALED CALLS ..................................................................................................................................... 11 7.4 CALL TIME ........................................................................................................................................... 11 7.4.1 Call Time ........................................................................................................................................ 11 7.4.2 Reset Time ....................................................................................................................................... 11 7.5 DELETE RECORD .................................................................................................................................. 12 8 CONTACTS .................................................................................................................................. 12 8.1 VIEW A CONTACT ................................................................................................................................ 12 8.2 ADD A NEW CONTACT ......................................................................................................................... 13 8.3 SEARCH FOR A CONTACT ..................................................................................................................... 13 8.4 GROUP ................................................................................................................................................. 13 8.4.1 Add a Contact to the Group ............................................................................................................ 13 8.4.2 Delete a Contact from the Group .................................................................................................... 13 8.4.3 Add a Group ................................................................................................................................... 14 8.4.4 Rename a Group ............................................................................................................................. 14 8.4.5 Set a Ring tone to a Group .............................................................................................................. 14 8.5 DELETE A CONTACT............................................................................................................................. 14 8.6 SPEED DIAL ......................................................................................................................................... 15 8.7 COPY CONTRACTS ............................................................................................................................... 15 8.8 MOVE CONTRACTS .............................................................................................................................. 15 8.9 MEMORY STATUS ................................................................................................................................ 15 9 TOOLS .......................................................................................................................................... 16
CDMA FWP PX120N 9.1 SCHEDULE ........................................................................................................................................... 16 9.2 ALARM CLOCK .................................................................................................................................... 16 9.3 CALCULATOR ....................................................................................................................................... 16 9.4 UTK .................................................................................................................................................... 16 9.5 WORLD TIME ....................................................................................................................................... 16 10 SETTINGS .................................................................................................................................... 17 10.1 TONES .................................................................................................................................................. 17 10.1.1 Ring Tone ................................................................................................................................... 17 10.1.2 Volume ........................................................................................................................................ 17 10.1.3 Alert ............................................................................................................................................ 17 10.2 DISPLAY .............................................................................................................................................. 17 10.2.1 Banner ........................................................................................................................................ 17 10.2.2 Backlight ..................................................................................................................................... 18 10.2.3 Contrast ...................................................................................................................................... 18 10.2.4 Language .................................................................................................................................... 18 10.2.5 Hyphen ....................................................................................................................................... 18 10.2.6 Time and Date ............................................................................................................................ 18 10.3 SECURITY............................................................................................................................................. 19 10.3.1 Lock phone ................................................................................................................................. 19 10.3.2 PIN Lock ..................................................................................................................................... 19 10.3.3 Change PIN ................................................................................................................................ 19 10.3.4 Incoming Call Setting ................................................................................................................. 19 10.3.5 Outgoing Call Setting ................................................................................................................. 20 10.3.6 Change Password ....................................................................................................................... 20 10.3.7 Load Default ............................................................................................................................... 20 10.4 CALL SETTINGS ................................................................................................................................... 21 10.4.1 Auto Answer ............................................................................................................................... 21 10.4.2 Voice Privacy ............................................................................................................................. 21 10.5 NETWORK SERVICE .............................................................................................................................. 22 10.6 PHONE INFO ......................................................................................................................................... 22 10.7 PORT SPEED ......................................................................................................................................... 22 11 DATA SERVICE .............................................................................................. 错误！未定义书签。 12 TECHNICAL PARAMETERS ....................................................................................................... 22 13 QUICK TROUBLESHOOTING GUIDE ........................................................................................ 23
1 CDMA FWP PX3x0N 1 General Introduction Thank you for choosing CDMA Fixed Wireless Phone of Axesstel. To use your phone well, please read this user manual carefully before you use. The phone has been designed to operate with the latest digital communication technology - Code Division Multiple Access (CDMA). The phone provides the following advanced features:  Large LCD with backlight, easy to read  Status Indicators  Two-way SMS, voice mail and caller ID  Call Forwarding, Call Waiting, Three-Way Calling and Do not disturbing  High speed packet data dial-up Internet service (Only available for PX300N, not for PX1x0N)  PC Fax  Emergency call  MENU driven interface for easy operation and configuration  Store 200 contacts in phone  Save 200 SMS in phone  Last call redials  Choice of 13 ring tones  Adjustable ring and voice volume  AC power supply  Indoor antenna (and Outdoor antenna is optional)  Speaker phone for hand-free operation  Call privacy is also supported by CDMA technology  Long battery stand-by and talk time  User friendly keypad  Easy to service and repair
2 CDMA FWP PX120N 2 Important Information  The product can only be installed indoors.  Do not place the phone near high temperature objects, under direct sunlight, near source of water, near fire or near inflammable and explosive materials. Avoid using the phone in high temperature or humidity.  The phone may interfere with heart pacemaker, hearing aid and other electronic medical devices. Therefore please follow the instructions given by your equipment suppliers or consult your doctor. Turn your phone OFF in health care centers if any regulations posted in the area instruct you to do so. Hospitals or health care centers may be using equipment that may be sensitive to external RF energy.  Place the phone away from other electronic devices like TV and Radio to avoid interference.  Keep the product away from magnetic field and static electricity.  Place the phone out of the reach of small children.  Do not attempt to reassemble the phone by yourself. Only authorized personnel could service the phone and its accessories. Faulty installation or service can be dangerous and may invalidate the warranty.  Do not clean the phone while in operation. Before attempting to clean the phone, turn the phone off, disconnect the external power adapter and take out the battery. Use a dry, soft cloth for cleaning. Do not use liquid or aerosol cleaners.  Do not drop, knock or shake the phone. Rough handling may break the phone body and internal circuit boards.  Do not use the phone if the antenna is damaged. Replace the damaged antenna immediately by a qualified technician. Use only a manufacturer approved antenna. Non-approved antennas, modifications or attachments may impair call quality and damage the phone.  Do not hold the antenna during operation. This may affect call quality and cause the phone to operate at unintended power levels.  Keep the antenna free from obstructions and position the antenna straight up. This will ensure best call quality.  Only use the battery and the power adapter approved by the manufacturer. If not, it may cause an explosion or result in a short circuit.  It is highly recommended to fully charge the battery before initial use. The battery might have been discharged during storage and delivery.  Do not throw battery. Batteries are not to be disposed off by putting them in fire. It may explode or catch fire.  The power adapter must be used within the specified AC voltage range.  Take out the battery if you won’t use your phone for a long time and keep the battery well.  During lightning, do not touch the power plug. It may result in an electric shock or death.  Do not touch the plug with wet hands. Always grasp and pull the plug, not the cord. Do not put heavy things on the power cord or bend it too much.  During daily use, do not pull out the power adapter. The battery is used for backup power, which will not cause the increasing consumption of electricity.  Don’t use the power adapter if the power cable is damaged. Contact the maintenance center immediately and replace the adapter.
3 CDMA FWP PX120N 3 Product Overview 3.1 Packing List Once you open the product package, please check the packing list to make sure there is no part missing. If any part is missing or broken, please contact the customer service. The packing list is as follow: No. Name Qty. Remark 1 Phone Body 1 2 Handset 1 3 Antenna 1 4 Handset Cable 1 5 Ni-MH Rechargeable Battery 1 Li-Ion Battery if specified 6 Charger 1 7 CD Disk 1 8 Prints 1 Including one User Manual, one Warranty Card Table 1 Packing List 3.2 Product Introduction 3.2.1 Appearance Figure 1 PX120N Appearance
4 CDMA FWP PX120N 3.2.2 Key Definition Figure 2 Key Layout 1 CONTACTS Go into the contracts MENU 2 MENU Key Go into the main MENU 3 OK Key Press it to access the subMENU In Standby mode, press OK key go into Dialed Calls function 4 Volume+- Adjust the volume and scroll through the MENU options and displays 5 Clear Press it return to the last MENU and delete characters, 6 Redial Key In standby mode, press redial key go into the call log 7 0~9 Numeric Keys and * # Key To input numbers and characters 8 Speaker Key Make hand-free operation(speaker icon) 9 Power. key Press the power key can turn on and turn off the phone
5 CDMA FWP PX120N 3.2.3 Display Icon The following icon may appear on the display of the phone: No. Icon Description 1 Current signal strength. The more bars there are, the stronger the signal is. 2 No signal. 3 Battery capacity indicator. The more bars there are, the more capacity the battery has. 4 Supplied by charger 5 Alarm on 6 Mute 8 No UIM card 9 Unread message 10 Roaming Figure 3 Display Icon 4 Basic Operations 4.1 Installing UIM card 1. Remove UIM bracket cover. 2. Insert proper UIM card. 3. Close the cover. 4.2 Power On/Off Connect DC power supply to the “DC IN” port or insert the battery to the battery chamber. Switch the “Power” switch (on the rear of the Phone) to ON, then press the Power On/Off Key on the panel for 3 seconds to power on the phone---if the DC power is in and the phone will power automatically, your phone should go to standby screen and is ready to use. You can turn the phone off directly by switching the “Power ON/OFF” switch (on the rear of the phone) to OFF position. If the phone will not be used for long time, please turn this switch to OFF. Or you can press the Power On/Off Key for 3 seconds to power off the phone.
6 CDMA FWP PX120N 4.3 Make a Call While your phone is power on and at standby screen, enter a destination number you wish to call and then press <Redial >Key. (Note: To modify digits you enter, you can press<CLEAR> Key to delete wrong digits first and then enter new digits). Or you can press <Contacts> key to enter contacts menu, <1 View>, <Volume + ->,<OK> to select the contacts list:<1 UIM Contacts>,<2 Phone Contacts>, or <3 Search Name> to search the desired name, press <Volume+-> to scroll to the desired number then press <Redial >Key .Once the call is connected, the phone’s screen will display the number you have dialed, and the time duration the call has lasted. The phone also has a speaker. To use the speaker to make a call, press <SPEAKER> Key, enter a phone number, and press <Redial> Key. 4.4 Answer a Call When there is an incoming call, the phone will ring and display the phone number of the incoming call (if the number is available). You can pick up the handset or press <SPEAKER> to answer the incoming call. The ring tone and ring-tone volume can be changed in the setting menu. Note: When the ring volume is set to ’Slient’, the phone does not ring. Only the “Incoming call” message blinks. 4.5 End a Call You can end a call by pressing <POWER>. If you are using the handset for a phone call, hanging up the handset will end the call automatically.
7 CDMA FWP PX120N Messages1 Create2 Inbox(1)3 Outbox(1)Select Back5 Main MENU Press Left Soft Key Key to enter the main MENU from the standby screen. The main MENU includes: Contacts, Messages, Recent Calls, Tools, and Settings. The MENU tree is as follow: MENU Messages Create Inbox Outbox Draft Voice Mail Template Messages Delete Messages Memory Status Message Settings Call Log Missed Calls Received Calls Dialed Calls Call Time Delete Record Contacts View Add New Search Name Groups Delete All Speed Dial Copy Contacts Move Contacts Memory Status Tools Schedule Alarm Calculator UTK World Time Settings Tones Display Security Call Settings Network Service Phone Info Port Speed Figure 4 MENU Tree 6 Messages You could compose a new message, view the inbox and outbox, perform SMS setting, voice mail. In standby screen, you can enter Messages in the following method: Press <MENU>, <Messages>. 6.1 Send a Message You could send a message to one recipient or multiple recipients. 1. Press <MENU>, <Messages>, <1 Create> to compose a new message, you can input space by <0> key and input symbol by <*> key, also you can switch input method by <#> key.
8 CDMA FWP PX120N Options1 Send2 Send Message3 Insert TemplateSelect BackPriority1 Normal2 EmergencySelect BackContacts(4/1)TomHelenSelect Back01:<empty>1 Send Message2 Add New3 Delete4 Delete AllSelect BackSearch NameTomHelenSelect Back01:<empty>4 Delete All5 Priority6 Callback7 SaveSelect BackYou have 1 newmessage!ViewMessages1 Create2 Inbox(1)3 Outbox(1)Select BackOptions1 Reply2 Forward3 Save NumberSelect Back2. After finish inputting the text, press <OK > to select the Send, Send Messages, Insert Template, Insert Contacts, or Save as Template function. 3. Press <1 Send> to send a message to one recipient， input destination number directly or select numbers from (Contacts), press <MENU>, <1Send>to send it. You can also set the priority by selecting (Priority). If you want to edit the call back number which show in the message, please select Callback to edit. Or you can save the message to Draft by selecting Save. 4. Press <2 Send Messages> to send a message to a group, press <OK>, <MENU>,<Volume +-> to scroll to <2 Add new> to select numbers to add to the group, then press <MENU>, <1 Send Messages> to send message. You can press <Volume +-> to scroll to <3 Delete> or <4 Delete All> to delete the number you have added. You can also set the priority by selecting (Priority). If you want to edit the call back number which show in the message, please select Callback to edit. Or you can save the message to Draft by selecting Save. 6.2 Receive a Message 1. If there is a new message, the phone will ring alert. In standby screen, press <MENU>to read the message, 2. Or you could read the new message in the (Inbox). In Messages, press <Volume+-> to scroll to <2 Inbox>, press <MENU> to enter (inbox), then press <Volume+-> to scroll to the message you want to read. 3. Then press <MENU>, you can select: Reply: Reply the message. Forward: Forward the message. Save Number: Save the number(s) in the message. Call: Call the number(s) in the message. Delete: Erase the message. Options3 Save Number4 Call5 DeleteSelect Back
9 CDMA FWP PX120N Messages1 Create2 Inbox(1)3 Outbox(1)Select BackOutbox(1/1) TomSelect BackMessages4 Draft(6)5 Voice mail6 Template MessagesSelect BackOptions1 Edit2 DeleteSelect BackMessages4 Draft(6)5 Voice mail6 Template MessagesSelect BackVoice mail1 Voice mail<0>2 Listen to Voice Mail3 Voice Mail NumberSelect BackMessages4 Draft(6)5 Voice mail6 Template MessagesSelect BackOptions1 Send2 Add NewSelect BackMessages7 Delete Messages8 Memory status9 Message settingsSelect BackDelete Messages1 Inbox2 Outbox3 DraftSelect Back 6.3 View Outbox 1. In Messages, press <Volume+-> to scroll to <3 Outbox> and press <MENU> to enter (Outbox). 2. Press <volume+-> to scroll to the message you want to read, press <MENU> to choose <1 Forward>, <2 Save Number>, <3 Call>, <4 Delete>. 6.4 Drafts 1. In Messages, press <Volume+-> to scroll to <4 Drafts> and press <MENU> to enter (Drafts). 2. Press <Volume> to select one draft, press <Volume+->, < MENU > to select <1 Edit> to edit it or <2 Delete> to delete it. 6.5 Voice Mail In standby screen, press<MENU>, <Messages>, <5 Voice mail>, <OK>to view the Voice Mail MENU. 1. If you have voice massage, press <1Voice Mail>, <OK> to check your massage. 2. If you have voice message, press <2 Listen to Voice Mail> to listen it. 3. In Voice Mail MENU, press <3 Voice Mail Number>, <OK> to set the voice mail number. Note: Particular function and operation, please contact your local operator. 6.6 Template Message 1. In Messages, press <Volume+-> to scroll to <6 Template Messages> and press <MENU> to enter it. 2. Press <Volume> to select one template, press <Volume+->, <MENU> to select <1Send> or <2 Add new>. 6.7 Delete Messages 1. Press <Volume> to scroll to <7 Delete messages> and press <OK> to enter it. 2. Press <MENU> to select <1 Inbox>, press <OK > to delete it or <Clear> to exit it. Note: You can press <Volume+-> to scroll to <2 Outbox>,
10 CDMA FWP PX120N Total FreePhone 200 179UIM 40 27 BackMessages7 Delete Messages8 Memory status9 Message settingsSelect BackMsg Settings1 Send Mode2 Save PositionSend and SaveSend Modeo Send Onlyo Send and Saveo Save OnlySelect BackSave positiono UIM cardo Phoneo UIM card and PhoneSelect BackCall log1 Missed Calls2 Received Calls3 Dialed CallsSelect BackMissed Calls1 100002 Tom3 10000Select BackStart:01/06,00:00:00No answer.TomOptions BackCall log1 Send Message2 Save3 DeleteSelect Back<3 Draft>, <4 all>, if you want to delete them, follow the steps above. 6.8 Memory Status In this MENU, you could check the phone memory status and UIM card memory status for messages. In Messages, press <volume+-> to scroll to <8 Memory status>, press <OK > to view the status. 6.9 Message Settings You can set Send Mode and Save Position in Msg Settings MENU. 1. In Messages, press <Volume+-> to scroll to <9 Message settings>. 2. Press <MENU> to enter the interface, select <1 Send Mode> or <2 Save position> by pressing <Volume+->. 3. Press <Ok> to enter Send Mode, <Volume+-> to scroll to the mode you wanted. 4. Press <Volume +->, <OK> to enter Save position which provides three locations: UIM card, Phone, UIM card and Phone. 5. Press <ok > to save your setting. 7 Call Log You can find Missed Calls, Received Calls, Dialed Calls, Call Time, and Delete Record in Call Log MENU. 7.1 Missed Calls 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <OK> to select <1 Missed Calls> in Call log MENU, 3. The missed calls list will be displayed, press <volume+-> to scroll to the desired number. 4. Press<MENU> to view the incoming call information, press <MENU> again to:
11 CDMA FWP PX120N Call log1 Missed Calls2 Received Calls3 Dialed CallsSelect BackCall log1 Send Message2 Save3 DeleteSelect BackCall log3 Dialed Calls4 Call Time5 Delete RecordSelect BackDialed Calls1 100002 Tom3 10000Select BackCall log1 Send Message2 Save3 DeleteSelect BackCall log3 Dialed Calls4 Call Time5 Delete RecordSelect BackCall Time1 Received Calls2 Dialed Calls3 All CallsSelect BackReceived Calls3 CallsTotal:0:01:19 BackCall Time2 Dialed Calls3 All Calls3 Reset TimeSelect BackReset Time1 Received Calls2 Dialed Calls3 All CallsSelect Backa) Send Message: Use this number to send a message. b) Save: Save this number to contacts. c) Delete: Erase this number in the list. 7.2 Received Calls 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <Volume+->, <OK > to select <2 Received Calls> in call log MENU, 3. The Received calls list will be displayed; you could scroll to the desired number, 4. Press <MENU>to view the incoming call information, press <MENU> to: a) Send Message: Use this number to send a message, b) Save: Save this number to contacts, c) Delete: Erase this number in the list. 7.3 Dialed Calls 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <Volume+->, <MENU> to select <3 Dialed Calls> in call log MENU, 3. The Dialed calls list will be displayed; you could scroll to the desired number, 4. Press<MENU> to view the incoming call information, press <MENU> to: a) Send Message: Use this number to send a message, b) Save: Save this number to contacts, c) Delete: Erase this number in the list. 7.4 Call Time 7.4.1 Call Time 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <Volume+->, <MENU> to select <4 Call Time>, press <OK> to select <1 Received Calls>. 3. Press <OK> to view the incoming call time. Note: You can press <Volume+-> to scroll to Dialed calls, All calls to view the time as the same steps above. 7.4.2 Reset Time 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <Volume+->, <MENU> to select <4 Call Time>,
12 CDMA FWP PX120N Reset? OK CancelCall log3 Dialed Calls4 Call Time5 Delete RecordSelect BackDelete Record1 Missed Calls2 Received Calls3 Dialed callsSelect BackContacts1 View2 Add New3 Search NameSelect BackContacts1 View2 Add New3 Search NameSelect BackContacts4 Groups5 Delete All6 Speed DialSelect BackContacts1 UIM Contacts2 Phone ContactsSelect BackContacts(4/1)TomHelenOptions BackGroups1 Family2 FriendsOptions Back press <Volume+->, <OK> to select <4 Reset Time>. 3. Press <OK> to select <1 Received Calls>,press <OK> to reset received calls time or <Clear> to cancel the action. Note: You can press <Volume+-> to scroll to Dialed calls, All calls .If you want to reset time, follow the steps above. 7.5 Delete Record 1. In standby screen, press <MENU>, <Volume+-> to scroll to <2 Call Log>. 2. Press <Volume+->,<MENU> to select <5 Delete record> in call log MENU. 3. Press <OK> to select <1 missed calls>, press <OK> to delete the missed calls log or <Clear> to cancel the action. Note: You can press <Volume+-> to scroll to <2 Received calls>, <3 Dialed calls>,<4 all calls>,if you want to delete them, follow the steps above. 8 Contacts Contacts can be used to store contact’s name and contact’s phone numbers, address, email, internet address and note. You can store up to 200 entries to phone memory and 250 entries to UIM card. 8.1 View a Contact There are 4 ways to view a contact. 1. Press <Contacts> in standby screen，<1 View>, <Volume+->,<OK> to select the contacts list:<1 UIM Contacts>,<2 Phone Contacts>, press <Volume+->, <MENU> to select one, Press <Volume+-> to scroll to the number you desired, press <MENU> to view the contact information. 2. Press <MENU >< Contacts > <1 View ><OK>, press <Volume+-> to select (UIM Contacts) or (Phone Contacts), press <OK >, <Volume+-> to the desired contact, then press <OK> to view the contact information. 3. Press <MENU > <Contacts ><Volume +-><3 Search Name><OK>, input the name, press <MENU> to view the contact list. Scroll to the desired contact, press <MENU> to view the contact information. 4. Press <MENU > <Contacts > <Volume +-><4Groups><OK>, select the group that desired contact belongs by <Volume +->, press <OK> to view the group member list, then press
13 CDMA FWP PX120N Contacts1 View2 Add New3 Search NameSelect BackNumber: 6/20123456NextBackName: 3/12 abcTomSave BackContacts1 View2 Add New3 Search NameSelect BackSearch NameTomSelect BackContacts4 Groups5 Delete All6 Speed DialSelect BackGroups1 Family2 FriendsOptions BackOptions1.Add new2 Delete3 Delete AllSelect BackOptions1.Add new2 Delete3 Delete AllSelect Back<Volume +-> to scroll to the desired contact, press <OK> to view the contact information. 8.2 Add a New Contact 1. Press <MENU >, <Contacts>, <Volume +->, <2 Add New>, or press <Contacts> in standby screen, then press <OK> to select Add New. 2. Press <MENU> to input the number and name, press <MENU> again when finish the inputting, 3. Press <Volume> to select the location you want to store the new contract: <1 UIM Contacts>, <2 Phone Contacts>, press <OK> to save . 8.3 Search for a Contact You can search a contact by name, 1. Press <MENU >, <Contacts >, <3 Search Name><OK>. 2. Input the name for inquiry. 3. Press <MENU>to search. Note: You can press <#> to change the input method. 8.4 Group 8.4.1 Add a Contact to the Group 1. Press <MENU>, <Contacts >, <4 Groups>, <OK>, <Volume +->, scroll to the group that the desired contact belongs. 2. Press <OK> Key, then press <MENU>, <Volume+-> to select a contact to add to the group. 8.4.2 Delete a Contact from the Group 1. Press <MENU>, <Contacts >, <4 Groups>, <OK>, <Volume +->, scroll to the group that the desired contact belongs. 2. Press <OK>, <Volume +-> to select the desired contact , then press <MENU>, scroll to <2 Delete>, press <ok> twice to
14 CDMA FWP PX120N Delete? OK CancelA1 Add Group2 Group Ringers3 EditSelect BackA1 Add Group2 Group Ringers3 EditSelect BackName: 1/14abcaSave Back BackA1 Add Group2 Group Ringers3 EditSelect BackIn contactsｏTone1ｏTone2ｏTone3Select BackContacts4 Groups5 Delete All6 Speed DialSelect BackContacts(4/1)TomHelenOptions Backdelete the contact. Note: You can select <3 Delete All> to delete all contacts in the group or <1 Add New> to add a new contact to the group. 8.4.3 Add a Group There are 5 groups in your phone; You can add more groups. 1. Press <MENU>, <Contacts >, <4Groups>, <OK>, select one group, press <MENU>. 2. Select <1 Add Group>, press <OK >,input the new group name, press <MENU> to save it. 8.4.4 Rename a Group The feature is only provided for the group you added. 1. Press <MENU>, <Contacts >, <4 Groups>, <OK>, select one group you added, press <MENU>. 2. Press <Volume+-> to scroll to <3 Edit>, press <OK>, change the name , press <MENU> to save your setting. Note: You can delete the group you added by selecting <4 Delete>. 8.4.5 Set a Ring tone to a Group 1. Press <MENU>, <Contacts>, <4Groups>, <OK>, <Volume+->, scroll to the group you want to set ring tone, press<MENU>. 2. Press <Volume+-> to Scroll to <2 Group ringers>, press <MENU>, set a ring tone to the group, press <OK> to save the new ring tone. 8.5 Delete a Contact 1. In standby screen, press <MENU >< Contacts > <1 View ><OK>, press <Volume+-> to select (UIM Contacts) or (Phone Contacts), press <OK >, <Volume+-> to the desired contact, press <MENU>, <Volume+-> to select <2 Delete>. 2.Press <MENU> to delete the contract or <Contacts> to cancel the action. Options1 View2 Delete3 Send messageSelect Back
15 CDMA FWP PX120N Speed Dial02:<empty>03:<empty>Options BackOptions1.Add new2 Delete3 Delete AllSelect BackContacts7 Copy Contacts8 Move Contacts9 Memory StatusSelect BackCopy Contacts1 UIM Card to Phone2 Phone to UIM cardSelect BackCopy? OK CancelContacts7 Copy Contacts8 Move Contacts9 Memory StatusSelect BackMove Contacts1 UIM Card to Phone2 Phone to UIM cardSelect BackContacts7 Copy Contacts8 Move Contacts9 Memory StatusSelect Back Total FreePhone 200 179UIM 250 27 BackTools1 Schedule2 Alarm3 CalculatorSelect Back8.6 Speed Dial Memory locations 01 ~ 09 are special speed dialing locations. No.1 is voice mail number. You can edit the No.02~09 locations. 1. Make sure some contacts exist in phone book. 2. Press <MENU>, <Contacts>,<6 Speed Dial>, <OK>,select a contact from phone book to the Speed Dial list. Or you can press<MENU> to do Add New, Delete or Delete All operation. 1. In standby screen, press number 2~9 and <Redial> to make a call. 8.7 Copy Contracts 1. Press <MENU>, (Contacts), <7 Copy Contacts>. 2. Press <MENU>, <Volume+-> to select <1 UIM card to Phone> or <2 Phone to UIM card>. 3. Press <OK> to enter the setting interface, press <OK > again to complete the copy process or <Clear> to cancel the action. 8.8 Move Contracts 1. Press <MENU>,(Contacts),<8 Move Contacts>. 2. Press <MENU>, <Volume+-> to select <1 UIM card to Phone> or <2 Phone to UIM card>. 3. Press <OK> to enter the setting interface, press <Ok> again to complete the move process or <Clear> to cancel the action. 8.9 Memory Status 1. Press <MENU>, (Contacts), <9 Memory Status>. 2. Press <OK> to view the usage of both Phone and UIM.
16 CDMA FWP PX120N Schedule1 Add New2 List3 Delete AllSelect BackSchedule:0/30abcSave BackTools1 Schedule2 Alarm3 CalculatorSelect BackOptions1 Set2 EnableSelect BackAlarm Time: 00:00 Save BackTools1 Schedule2 Alarm3 CalculatorSelect BackTools3 Calculator4 UTK5 World TimeSelect BackTools3 Calculator4 UTK5 World TimeSelect BackSettings1 Tones2 Display3 SecuritySelect Back9 Tools 9.1 Schedule You could add your schedule in the phone, to add a schedule, please 1. In standby screen, press <MENU>, <Tools>, <1 Schedule>, <OK> to the schedule menu. 2. Select < 1 Add new>, <OK>to add a new schedule, press <Volume + -> to move the cursor to the date you want to add the schedule, then press<OK> key, input the schedule, then press<MENU> to set the schedule time. Press<MENU> to save. To view the schedule that you have added, select List in Schedule menu, then you could Delete, and View the schedule by press <Menu> key. You could delete all schedule by selecting Delete All in Schedule menu. 9.2 Alarm Clock You can set the alarm sound daily or one time only. 1. Press <MENU>, <4 Tools>, <2 Alarm>. 2. Select <1 set> to enter alarm time and press <MENU>. 3. Select <2> and press <MENU > to turn on/off the alarm. A bell icon appears in icon line. On alarm time, the icon and “ALARM TIME is up” message blinks and alarm activates. Press <MENU>to stop the alarm. Note: If you want to change the alarm time, press <volume+-> to choose the position you want to change and press <0> to change am/pm if your time mode is 12 hour. 9.3 Calculator You could find Calculator in the Tools MENU. <*> key to enter a decimal point, <#> key is for a negative sign, select the operation by pressing <Volume+-> keys. Press <MENU> the show the result, <MENU> to clear a number. 9.4 UTK Press <MENU>, <4 Tools>, <4 UTK>.You can get basic information about UTK (UIM tool kit) which based on service operator. 9.5 World Time In standby screen, press <MENU>, <Tools>, <5 World Time>, <OK> to the city list. Select a city, press<OK> to check the world time.
17 CDMA FWP PX120N Tones1 Ring Tone2 Volume3 Alert…Ring Tone1 In Contacts2 Not In Contacts3 MessagesTone1Tones1 Ring Tone2 Volume3 Alert…Volume1 Ring Tone2 Key Beep3 Handset4 HandsfreeMedTones1 Ring Tone2 Volume3 Alert…Alert1 Minute Beep2 Call Connect3 Power On/OffOnSettings1 Tones2 Display3 SecuritySelect BackDisplay1 Banner2 Backlight3 Contrast4 LanguageWelcomeBanner 7/20abcwelcomeSave BackDisplay1 Banner2 Backlight3 Contrast4 Language15 Seconds10 Settings 10.1 Tones Here you can set the ring tone and volume. Press <MENU>, (settings), press <Volume+-> to select Tones. 10.1.1 Ring Tone In Tones MENU, select <1 Ring Tone>, press<OK>, you can set the ringer for In Contacts, Not In Contacts, and Messages. Press<OK>to save your setting. 10.1.2 Volume In Tones MENU, select <2 Volume>, press<OK>, you can set the volume for Ring Tone , Key Beep, Handset, Handsfree. Press<OK>to save your setting. 10.1.3 Alert In Tones MENU, select Alert, press <OK> and then you can turn on/off the alert of Minute Beep, Call Connect, and Power On/Off. 10.2 Display Here you can set the banner, backlight, contrast, language. 10.2.1 Banner In standby screen, Press< MENU >, <Settings>, <2 Display >, <OK> to enter display menu. Select <1 Banner>, press<OK>, you can change the banner of the phone. Press<MENU>to save your setting. When you are back to the main page, you can see the banner you set. Note: You can press<#> to switch the input method. You can input 20 digits at most.
18 CDMA FWP PX120N Backlighto 7 Secondso 15 Secondso 30 SecondsSelect BackDisplay1 Banner2 Backlight3 Contrast4 Language2Contrasto 0o 1o 2Select BackDisplay1 Banner2 Backlight3 Contrast4 LanguageEnglishDisplay3 Contrast4 Language5 Hypen6 Time and DateEnableInsert into Hypeno Disableo EnableSelect BackDisplay3 Contrast4 Language5 Hypen6 Time and Date…Time format1 24-Hour2 12-HourSelect BackDate format1 MM-DD2 DD-MMSelect Back 10.2.2 Backlight In standby screen, Press< MENU >, <Settings>, <2 Display >, <OK> to enter display menu. Select <2 Backlight>, press<OK>, you can change the timer of turning off the backlight, and you also could turn off the backlight by selecting Always Off. Press<MENU>to save your setting. 10.2.3 Contrast In standby screen, Press< MENU >, <Settings>, < 2 Display >, <OK> to enter display menu. Select <3 Contrast>, press<OK>, you can change the contrast of LCD. There are 8 levels, 0 is the highest contrast. Press<MENU>to save your setting. 10.2.4 Language In standby screen, Press< MENU >, <Settings>, <2 Display >, <OK> to enter display menu. Select <4 Language>, press<OK>, you can change the phone language. Press<MENU>to save your setting. 10.2.5 Hyphen In standby screen, Press< MENU >, <Settings>, <2 Display >, press <OK> to enter Display menu, press <Volume +-> key to scroll to select <5 Backlight>, press<OK> If you Enable Hyphen, EX. In standby screen, when you input 1234567, it will display 123-4567. 10.2.6 Time and Date In standby screen, Press< MENU >, <Settings>, <2 Display >, press <OK> to enter Display menu, press <Volume +-> key to scroll to select <6 Time and Date>, press<OK>, you can set the Time format and Date format 1. Select Time format, press<OK>, set the time format to 24-hour or 12-hour via <Volume+->, press <OK> to save. 2. Select Data format, press <OK>, set the data format to MM-DD or DD-MM via <Volume+->, press <OK> to save.
19 CDMA FWP PX120N Settings1 Tones2 Display3 SecuritySelect BackLock Phoneo Unlocko LockSelect BackSecurity1 Lock Phone2 PIN Lock3 Change PIN4 Incoming call SettingSelect BackPIN Lock1 Disable PIN2 Enable PINSelect BackSecurity1 Lock Phone2 PIN Lock3 Change PIN4 Incoming call SettingSelect BackEnter Old PINRetry left 3OK ClearSecurity4 incoming call Setting5 Outgoing Call Setting6 Change Password7 Load DefaultSelect BackIncoming Call Settingo Incoming Call Limito Incoming Call Number ListSelect BackIncoming Call Limito Permit Allo Forbid Allo Permit ListSelect Back Incoming Call Number Listo Permit Listo Forbid ListSelect Back 10.3 Security Select Security in Settings MENU, you will be prompted to enter password; the initial password is “0000”, input the password, press <OK> key, then you can enter the security MENU 10.3.1 Lock phone In Security menu, select <1 Lock Phone>, press <OK> to select Unlock or lock the phone. Press <MENU>to save your setting. 10.3.2 PIN Lock In Security MENU, select <2 PIN Lock>, press <OK>, then you could Disable PIN, Enable PIN. 10.3.3 Change PIN In Security MENU, select <3 Change PIN>, press <MENU>, then you could change PIN. 10.3.4 Incoming Call Setting In Security menu, select <3 Incoming Call Setting>, press <OK> to do the Incoming Call Limit or Incoming Call Number List operation. 1) Select the Incoming Call Limit, press <OK>, select Permit All, Forbid All, Permit List or Forbid List . 2) Select the Incoming Call Number List, press<OK> to edit the Permit List or Forbid List. Press <OK> to edit the number list, you can edit 10 numbers in every list. Press <OK> to input number.
20 CDMA FWP PX120N Security4 incoming call Setting5 Outgoing Call Setting6 Change Password7 Load DefaultSelect BackOutgoing Call Settingo Outgoing Call Limito Outgoing Call Number Listo Dial Delay TimeSelect BackOutgoing Call Limito Permit Allo Forbid Allo Permit ListSelect Back Outgoing Call Number Listo Permit Listo Forbid ListSelect BackSecurity4 incoming call Setting5 Outgoing Call Setting6 Change Password7 Load DefaultSelect BackSecurity4 incoming call Setting5 Outgoing Call Setting6 Change Password7 Load DefaultSelect Back 10.3.5 Outgoing Call Setting In Security menu, select <4 Outgoing Call Setting>, press <OK> to do the Outgoing Call Limit, Outgoing Call Number List or Dial Delay Time operation. 1) Select the Outgoing Call Limit, press <OK>, select Permit All, Forbid All, Permit List or Forbid List screen. 2) Select the Outgoing Call Number List, press<OK> to edit the Permit List or Forbid List. Press <OK> to edit the number list, you can edit 10 numbers in every list. Press <OK> to input number. Select the Dial Delay Time, press<OK>. You can select the dial delay time: 1s~10s.Press <OK> to select. 10.3.6 Change Password In Security menu, select <5 Change Password>, press <OK>, you will be prompted to enter a new password twice, press <OK> key to confirm inputting, Press <Clear >key to clear a number 10.3.7 Load Default In Security MENU, select <7>(Load Default), press<MENU>the phone will restore all original phone settings.
21 CDMA FWP PX120N Settings4 Call Settings5 Network Service6 Phone InfoSelect BackCall Settings1 Auto Answer2 Voice PrivacyOffAuto Answero Offo OnSelect BackCall Settings1 Auto answer2 Voice privacySelect BackVoice Privacyo Enhancedo StandardSelect Back List Default Tones Ring Tone In Contacts Tone 1 Not In Contacts Tone 2 Messages Tone 2 Volume Ring Tone Med Key Beep Low Handset Med Handsfree Med Alert Minute Beep Off Call Connect Off Power On/Off On Display Banner welcome Backlight 7 Seconds Contrast 2 Language Espanol Hyphen Disable 10.4 Call Settings 10.4.1 Auto Answer In Call Settings menu, select <1 Auto Answer>, press <OK>. There are 2 options to choose, off and On. You can press<Volume+->, <OK> to select. If you choose On option, the phone will auto answer the incoming call after 3 second. 10.4.2 Voice Privacy In Call Settings menu, select <2 Voice Privacy>, press <OK>. There are 2 options to choose, Enhanced and Standard. You can press<OK> to select. The Enhanced mode is more secure than Standard mode. The enhanced mode is using 128bits encryption algorithm; and the standard mode is using 64bits encryption algorithm.
22 CDMA FWP PX120N Settings5 Network Service6 Phone Info7 Port SpeedSelect BackNetwork Service1 Call Forward2 Call WaitingSelect BackCall Waiting1 Activate2 CancelSelect BackSettings5 Network Service6 Phone Info7 Port SpeedSelect BackPhone Info1 Phone Number2 SW Version18918180171Settings5 Network Service6 Phone Info7 Port SpeedSelect BackCall Forward1 FWD if Busy2 FWD if No Answer3 FWD All CallsSelect Back 10.5 Network Service In Call Settings menu, select <5 Network Service>, press <OK>. 1. Press <OK> to select <1 call Forward>, press <OK> to select <1 Activate> or <2 Cancel> to enable call forward if busy or disable it. Note: You can select <2 FWD If No Answer> and <3 FWD All Calls> via <Volume +-> key, follow the steps above to enable or disable them. 2. Press <Volume+-> to select <2 Call Waiting>, press <OK> to activate it or cancel it. 10.6 Phone Info You could check the phone information in this MENU. The phone information includes Phone Number (need you to input the number first), SW Version (Software Version). 10.7 Port Speed Please consult your operator for details on this function. . 11 Technical Parameters Dimensions 190(L) x130(W) x63(H) mm Weight <1.0kg Air Interface IS-95A/B, IS-2000 Vocodec 13K QCELP & 8K EVRC Charger AC Input 90 ~ 240 VAC, 50~60Hz Charger DC Output 5.3VDC @800mA Backup Battery 3.6V/1200mAh Li-ON Rechargeable Battery Operation Temperature -10℃~ 50℃
23 CDMA FWP PX120N Range of Humidity 5% ~ 95% RH 12 Quick Troubleshooting Guide  Unable to send/receive data/fax calls: Check the connections to computer and verify that necessary software has been properly installed and configured.  Moisture or ventilation problems: Visually inspect the phone body, moisture can damage the phone. Ventilation is also very important. Move the phone to improve the ventilation as necessary.  No power: Verify that AC power source and its corresponding circuit breaker are functioning properly.  If Phone can’t make data connection:  Make sure to follow Modem installation procedures  Make sure that you have purchased CDMA1x service from your CDMA service provider  Make sure that both PC’s modem driver and proper software are installed correctly  Unable to receive incoming calls:  Make sure that the incoming call is not restricted;  Make sure the FAX/DATA mode setting is OFF  Make sure that your Phone is having good signal reception  Unable to make outgoing calls:  Make sure that the numbers you dialed are not restricted;  Make sure that your Phone is having good signal reception  Unable to receive SMS: Make sure that your Phone’s memory is not full for storing SMS. If the memory is full, please empty inbox.  While charging the battery, DON’T disconnect the charger before the battery is fully charged. REMEMBER: You can always use Load Default sub-MENU in Security MENU to restore all original phone settings.

Navigation menu