Axxess GRMZBC4 Ready Maid System Guest Room Masters User Manual FCC Regulatory Compliance Information

Axxess Industries Inc. Ready Maid System Guest Room Masters FCC Regulatory Compliance Information

Exhibit 8

Axxess Industries Inc.
INSTALLATION AND OPERATIONS MANUAL
Guest Room Masters
Models GRM-ZB-C4-4-x, GRM-ZB-LX-4-x and GRM-ZB-QT-4-x (whereby x denotes product color)
The above-noted models of Guest Room Masters are part of Axxess Industries Inc.’s Ready Maid System.
These Guest Room Master models provide self-explanatory switch buttons allowing a hotel guest to select preference selections such
as Do Not Disturb and Make-Up-Room.
They also include a doorbell module.
Installation:
1) Connect low voltage power (12V-24V) to terminals P1 and P2 (polarity is irrelevant) by inserting solid core wires into the P1 P2
terminals.
2) Connect wire harness to slave indicator panel by plugging in the RJ45 plug of the Wire Harness into the RJ45 jack on the back
of the Guest Room Master;
3) Mount Guest Room Master in 1 gang position of a standard electrical box with 2 6-32 screws (supplied); mount switch cover
(not supplied)
4) For optional ZigBee wireless communications follow the instructions by the manufacturer of the network controller to join the
Guest Room Master to the applicable ZigBee network.
Operation:
1) For Do Not Disturb indication press the (DND) switch button labeled “Do Not Disturb” or “Privacy” , or other words to that
effect;
2) For housekeeping request press the (HK) switch button labeled “Housekeeping” or “Make-Up-Room”, or other words to that
effect;
3) For optional 3rd button functionality, such as Master On/Off press the 3rd button labeled accordingly;
4) For Room Ready for Inspection indication press and hold the DND and HK switch button for approx 2 sec, until the green LED
associated with the HK button start blinking.
5) The turn any one indication off, press the same button again.
6) The set an alternative selection simply press the new selection. The former selection will turn off automatically.
"This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation."
FCC Regulatory Compliance Information
FCC ID: WP4GRMZBC4, and WP4GRMZBLQ
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own
expense.
CAUTION: Any changes or modification not express approved by Axxess Industries Inc. could void the user authorization to operate
this equipment.

Navigation menu