Axxess HPZM2 ZIGBEE WIRELESS MODULE User Manual 1
Axxess Industries Inc. ZIGBEE WIRELESS MODULE 1
Axxess >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2325690 |
| Application ID | 96FQciS6HAdhhy46zDSgvg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 130.72kB (1634016 bits) |
| Date Submitted | 2014-07-15 00:00:00 |
| Date Available | 2014-07-15 00:00:00 |
| Creation Date | 2014-07-10 13:57:22 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2014-07-10 13:57:22 |
| Document Title | Untitled-1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Toni Adrian |
HPZM2 USER’S MANUAL JULY 10 2014 United States (FCC) This equipment complies with Part 15 of the FCC rules and regulations. To fulfill FCC Certification requirements, and OEM manufacturer must comply with the following regulations: (1) The modular transmitter must be labelled with its own FCC ID number, and, if the FCC ID number is not visible when the module is installed inside another advice, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Example of label required for OEM product containing HPZM2 module Contains FCC ID: HPZM2 WARNING: The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmitter must be labelled with its own FCC ID number. This includes a clearly visible label on the outside of the final product enclosure that displays the content shown below. If the FCC ID is not visible then the outside of the device into which the module is installed must also display a label referring to the enclosed equipment. IMPORTANT: This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (FCC 15.19). The internal / external antenna(s) used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT: The module is limited to OEM installation only. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module. The module is limited to installations in mobile or fixed applications, according to Part 2.1091(b). Separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. IMPORTANT: OEM integrators must include the following instructions and statements in the user manual (i.e. end product): (1) statements and labeling as required per Part 15.19 and 15.21, and (2) end-users must be provided with transmitter/antenna installation requirements and operating conditions for satisfying RF exposure compliance: (i) a separate section should clearly state “FCC RF Exposure requirements”, (ii) Required operating conditions for end users, (iii) antenna or transmitter installation requirements where relevant (i.e. “ The internal / external antenna(s) used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”) HPZM2 USER’S MANUAL JULY 10 2014 Canada (IC) Equipment is subject to certification under the applicable RSSs, shall be permanently labelled on each item, or as an inseparable combination. The label must contain the following information for full compliance: For HPZM2 module: IC: 9709A-HPZM2 AXXESS HPZM2 ZRM HPZM2 The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labelled to display the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording expressing the same meaning, as follows: Contains transmitter module IC: 9709A-HPZM2 The applicant for equipment certification of the module shall provide with each unit of the module either a label such as described above, or an explanation and instructions to the user as to the host device labelling requirements. IMPORTANT: This equipment for which a certificate has been issued is not considered certified if it is not properly labelled. The information on the Canadian label can be combined with the manufacturer’s other labelling requirements. IMPORTANT: Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1( l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT: To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The antenna used with this module must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. Conformément à la réglementation d'Industrie Canada, le présent éemetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. IMPORTANT: The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population. Consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb. HPZM2 USER’S MANUAL JULY 10 2014 The HPZM2 Module has been certified for use in European Union countries. If the HPZM2 Module Furthermore, the manufacturer must maintain a copy of the HPZM2 Module documentation HPZM2 USER’S MANUAL JULY 10 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 4 Create Date : 2014:07:10 13:57:22-07:00 Modify Date : 2014:07:10 13:57:22-07:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Toni Adrian Creator : CorelDRAW X6 Title : Untitled-1EXIF Metadata provided by EXIF.tools