Axxess LPZM3 RADIO COMMUNICATIONS MODULE User Manual User s Manual

Axxess Industries Inc. RADIO COMMUNICATIONS MODULE User s Manual

User Manual

TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i n d u s t r i e s103-470 NEAVE COURTKELOWNA BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 20133 JULY 2013
UNITED STATES (FCC)This equipment complies with Part 15 of the FCC rules and regulations.To fulfill FCC Certification requirements, an OEM manufacturer must comply with the followingregulations:1. The modular transmitter must be labelled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Example of label required for OEM product containing LPZM3 moduleWARNING: The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmittermust be labeled with its own FCC ID number. This includes a clearly visible label on the outside of thefinal product enclosure that displays the contents shown below. If the FCC ID is not visible when theequipment is installed inside another device, then the outside of the device into which the equipment isinstalled must also display a label referring to the enclosed equipment.IMPORTANT: This equipment complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation (FCC 15.19).The internal / external antenna(s) used for this mobile transmitter must provide a separation distance ofat least 20 cm from all persons and must not be co-located or operating in conjunction with any otherantenna or transmitter.Contains FCC ID: WP4LPZM3The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(i.) this device may not cause harmful interference and (ii.) this device must accept any interference received,including interference that may cause undesired operation.TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i n d u s t r i e s103-470 NEAVE COURTKELOWNA BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 20133 JULY 2013
TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i n d u s t r i e s103-470 NEAVE COURTKELOWNA BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 2013CANADA (IC)Equipment is subject to certification under the applicable RSSs, shall be permanently labelled on eachitem, or as an inseparable combination. The label must contain the following information for fullcompliance:For LPZM3 module:IMPORTANT: This equipment for which a certificate has been issued is not considered certified if it is notproperly labelled. The information on the Canadian label can be combined with the manufacturer's otherlabelling requirementsIMPORTANT: Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that maycause undesired operation.IMPORTANT: To reduce potential radio interference to other users, the antenna type and its gain shouldbe so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted forsuccessful communication.IMPORTANT: The installer of this radio equipment must ensure that the antenna is located or pointedsuch that it does not emit RF field in excess of Health Canada limits for the general population. ConsultSafety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb.Certification Number:Manufacturer's Name, Trade Name or Brand Name:Model Name:IC: 9709A-LPZM3AXXESS LPZM3 ZRMLPZM33 JULY 2013
EUROPEAN UNION (ETSI)The LPZM3 Module has been certified for use in European Union countries. If the is incorporated into a product, the manufacturer must ensure compliance of the final product to the European harmonized EMC and low-voltage/safety standards. A Declaration of Conformity must be issued for each of these standards and kept on file as described in Annex II of the R&TTE Directive.Furthermore, the manufacturer must maintain a copy of the LPZM3 Module documentationand ensure the final product does not exceed the specified power ratings, antennaspecifications, and/or installation requirements as specified in the user manual. If any of these specificationsare exceeded in the final product, a submission must be made to a notified body for compliancetesting to all required standards.IMPORTANT: The 'CE' marking must be affixed to a visible location on the OEM product. The CE markshall consist of the initials "CE" taking the following form:LPZM3 ModuleIf the CE marking is reduced or enlarged, the proportions given in the above graduated drawing mustbe respected.The CE marking must have a height of at least 5mm except where this is not possible on account ofthe nature of the apparatus.The CE marking must be affixed visibly, legibly, and indelibly.More detailed information about CE marking requirements you can find at "DIRECTIVE 1999/5/EC OFTHE EUROPEAN PARLIAMENT AND OF THE COUNCIL" on 9 March 1999 at section TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i n d u s t r i e s103-470 NEAVE COURTKELOWNA BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 20133 JULY 2013

Navigation menu