Axxess LPZM3 RADIO COMMUNICATIONS MODULE User Manual

Axxess Industries Inc. RADIO COMMUNICATIONS MODULE User s Manual

a href="https://usermanual.wiki/Axxess" itemprop="url"> Axxess >

User Manual

TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i  n  d  u  s  t  r  i  e  s103-470 NEAVE COURTKELOWNA  BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 20133 JULY 2013
UNITED STATES (FCC)This equipment complies with Part 15 of the FCC rules and regulations.To fulfill FCC Certification requirements, an OEM manufacturer must comply with the followingregulations:1. The modular transmitter must be labelled with its own FCC ID number, and, if the FCC ID is not visible    when the module is installed inside another device, then the outside of the device into which the    module is installed must also display a label referring to the enclosed module. This exterior label can    use wording such as the following:        Example of label required for OEM product containing LPZM3 moduleWARNING: The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmittermust be labeled with its own FCC ID number. This includes a clearly visible label on the outside of thefinal product enclosure that displays the contents shown below. If the FCC ID is not visible when theequipment is installed inside another device, then the outside of the device into which the equipment isinstalled must also display a label referring to the enclosed equipment.IMPORTANT: This equipment complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation (FCC 15.19).The internal / external antenna(s) used for this mobile transmitter must provide a separation distance ofat least 20 cm from all persons and must not be co-located or operating in conjunction with any otherantenna or transmitter.Contains FCC ID: WP4LPZM3The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(i.) this device may not cause harmful interference and (ii.) this device must accept any interference received,including interference that may cause undesired operation.TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i  n  d  u  s  t  r  i  e  s103-470 NEAVE COURTKELOWNA  BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 20133 JULY 2013
TITLE: DATE: REVISION:19 JUNE 2013LPZM3 USER’S MANUALTHIS DRAWING IS THE PROPERTY OF AXXESS INDUSTRIES INC. AND MAY BE NEITHER USED, COPIED, REPRODUCED OR OTHERWISE DEALT WITH NOR ITS CONTENTS COMMUNICATED TO OTHERS EXCEPT IN ACCORDANCE WITH WRITTEN INSTRUCTIONS RECEIVED FROM AXXESS INDUSTRIES INC.i  n  d  u  s  t  r  i  e  s103-470 NEAVE COURTKELOWNA  BC CANADA V1V 2M21 866 680 2457 WWW.AXXIND.COM2 JULY 2013CANADA (IC)Equipment is subject to certification under the applicable RSSs, shall be permanently labelled on eachitem, or as an inseparable combination. The label must contain the following information for fullcompliance:For LPZM3 module:IMPORTANT: This equipment for which a certificate has been issued is not considered certified if it is notproperly labelled. The information on the Canadian label can be combined with the manufacturer's otherlabelling requirementsIMPORTANT: Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that maycause undesired operation.IMPORTANT: To reduce potential radio interference to other users, the antenna type and its gain shouldbe so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted forsuccessful communication.IMPORTANT: The installer of this radio equipment must ensure that the antenna is located or pointedsuch that it does not emit RF field in excess of Health Canada limits for the general population. ConsultSafety Code 6, obtainable from Health Canada's website www.hc-sc.gc.ca/rpb.Certification Number:Manufacturer's Name, Trade Name or Brand Name:Model Name:IC: 9709A-LPZM3AXXESS LPZM3 ZRMLPZM33 JULY 2013
Download:
Mirror Download [FCC.gov]
Document ID2011594
Application IDAfb0fjwZhu+iUzmqYNGxDg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize108.95kB (1361859 bits)
Date Submitted2013-07-09 00:00:00
Date Available2013-07-09 00:00:00
Creation Date2013-07-03 15:43:49
Producing SoftwareCorel PDF Engine Version 15.2.0.686
Document Lastmod2013-07-03 15:43:49
Document TitleUser's Manual
Document CreatorCorelDRAW X5
Document Author: Toni Adrian
FCC ID Filing: WP4LPZM3

Navigation menu