Aztech Technologies DSL1000EWL ADSL2/2+ 4-Ports 802.11b/g User Manual DSL1000EW L v1 0 Aztech Retail

Aztech Technologies Pte Ltd. ADSL2/2+ 4-Ports 802.11b/g DSL1000EW L v1 0 Aztech Retail

Users Manual

DSL1000EW(L) ADSL2/2+ 4-Ports 802.11b/g
User Manual Page 2 of 73 © Copyright 2009 All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners. LIMITATION OF LIABILITY AND DAMAGES THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.
User Manual Page 3 of 73 Contents About the Router .......................................................................................................................................................................6 Main Features...................................................................................................................................................... 7 Requirements....................................................................................................................................................10 Package Contents...........................................................................................................................................10 Device Design.................................................................................................................................................... 11 Getting Started.........................................................................................................................................................................13 Planning Your Network.................................................................................................................................14 Remove or Disable Conflicts ....................................................................................................................15 Internet Sharing, Proxy, and Security Applications ................................................................ 15 Configuring TCP/IP Settings.................................................................................................... 16 Configuring Internet Properties................................................................................................ 16 Removing Temporary Internet Files........................................................................................ 17 Setup the Device..............................................................................................................................................18 Connecting to the Internet ....................................................................................................................... 19 Connecting Via Quick Setup3....................................................................................................319 Connecting Wireless Devices ................................................................................................................20 About the Web User Interface.........................................................................................................................................21 Accessing the Web User Interface .......................................................................................................21 Menus.....................................................................................................................................................................21 Device Info3............................................................................................................................... 21Quick Setup3............................................................................................................................. 21Advanced Setup3....................................................................................................................... 21Wireless3.................................................................................................................................... 21Diagnostics3............................................................................................................................... 21Management............................................................................................................................ 21Device Info.................................................................................................................................................................................22 Summary .............................................................................................................................................................22 WAN.........................................................................................................................................................................22 Statistics .............................................................................................................................................................23 LAN ........................................................................................................................................... 23
User Manual Page 4 of 73 WAN.......................................................................................................................................... 23 ATM .......................................................................................................................................... 23 ADSL......................................................................................................................................... 24 Route......................................................................................................................................................................25 ARP ..........................................................................................................................................................................25 DHCP.......................................................................................................................................................................26 Quick Setup ................................................................................................................................................................................27 Advanced Setup......................................................................................................................................................................28 ATM Interface....................................................................................................................................................28 WAN.........................................................................................................................................................................29 LAN...........................................................................................................................................................................34 NAT...........................................................................................................................................................................35 Virtual Servers.......................................................................................................................... 35 Port Triggering.......................................................................................................................... 36 DMZ Host.................................................................................................................................. 37 Security................................................................................................................................................................38 IP Filtering ................................................................................................................................ 38 Parental Control...............................................................................................................................................41 Quality of Service ...........................................................................................................................................42 Queue Config ........................................................................................................................... 43 QoS Classification.................................................................................................................... 44 Routing .................................................................................................................................................................45 Default Gateway....................................................................................................................... 45 Static Route.............................................................................................................................. 45 RIP ............................................................................................................................................ 46 DNS...........................................................................................................................................................................47 DNS Server .............................................................................................................................. 47 Dynamic DNS........................................................................................................................... 48 DSL............................................................................................................................................................................51 DNS Proxy Configuration .............................................................................................................................51 Interface Grouping........................................................................................................................................52 LAN Ports ..............................................................................................................................................................53 IPSec ......................................................................................................................................................................53 Certificate...........................................................................................................................................................55
User Manual Page 5 of 73 Local ......................................................................................................................................... 55 Trusted CA ............................................................................................................................... 57 Wireless......................................................................................................................................................................................58 Basic ......................................................................................................................................................................58 Security................................................................................................................................................................59 MAC Filter ............................................................................................................................................................60 Wireless Bridge .............................................................................................................................................. 61 Advanced.............................................................................................................................................................62 Station Info.........................................................................................................................................................63 Diagnostics...............................................................................................................................................................................64 Management ............................................................................................................................................................................65 Settings................................................................................................................................................................65 Backup...................................................................................................................................... 65 Update ...................................................................................................................................... 65 Restore Default ........................................................................................................................ 66 System Log .........................................................................................................................................................66 TR-069 Client .................................................................................................................................................... 67 Internet Time .................................................................................................................................................... 67 Access Control.................................................................................................................................................68 Services.................................................................................................................................... 68 IP Addresses............................................................................................................................ 69 Passwords ................................................................................................................................ 70 Update Software............................................................................................................................................... 71 Reboot.................................................................................................................................................................... 71 FCC Notice .................................................................................................................................................................................. 73
User Manual Page 6 of 73 About the Router Your router offers an easy way of integrating your computer and other network devices into a single network. Here are some of the benefits you can obtain from using the router in your home or office: Integrated Modem Feature Your router is an ideal solution for high speed Internet connectivity. It is capable of handling the fastest data transfer speed from your Internet provider and sharing this within your local network devices. Top Notch Security Your router utilizes built-in firewall security to block service attacks. For added flexibility, it can be modified to allow specific applications to pass through while blocking intrusive threats at the same time. Intuitive User Interface Applying changes on the router settings can be done easily using a Web browser. The router uses a simplified user interface that allows you to apply the configurations you want for the various features of the router. Your router will serve as the central figure in establishing your local area network (LAN) by using a combination of hardware and software. The hardware includes the cables, wireless access points, and Ethernet ports that create the path to connect your devices. The software part includes the applications that manage the flow of information in these devices. You can complete the basic installation and Internet connection within 8 minutes. Some more time is needed if you intend to utilize more advanced functions but it can be worth it. Advanced features like port forwarding will help you create your own web server to store your Web site, Dynamic DNS allows you to access your network from the Internet, and remote access enables you to configure your router settings from different locations. Once installation is complete, it will be much more easier for you to enjoy voice communication, high speed Internet, and data/audio/video sharing within your network.
User Manual Page 7 of 73 Main Features ADSL Support  ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant  G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready  ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)  AAL ATM Attributes - AAL5  Multiple PVC up to 8 support  Spectral compatibility with POTS  F4 & F5 OAM Loopback/Send and Receive  Annex A, Annex B, Annex M Support  TR048 and TR067 compliant  PVC support VPI=8, VCI=35 Encapsulation Support  RFC2684 Bridge and Routed LLC and VC Mux support  RFC2364 PPPoA Client support  RFC2516 PPPoE Client support  RFC2225/RFC1577 Classical IP Support  Transparent Bridge Support  PAP/CHAP/MS-CHAP for Password Authentication Support Network Support  Static IP, Dynamic RIP v1/v2 routing support  IP/TCP/UDP/ICMP/ARP Application Support  Network Address Translation (NAT)  PVC to VLAN Mapping  Port Forwarding/Triggering  Easy setup of Port Forwarding rules for popular Games/Application  NAT Application Level Gateway for popular applications  DHCP Server/Relay/client  DNS Relay Agent  DMZ support  SIP ALG (Application Layer Gateway) support
User Manual Page 8 of 73  Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support  PPP Always on  PPP Dial on Demand with configurable timeout  Universal Plug and Play Support  DDNS (Dynamic DNS) Support  IGMP Proxy Support (IGMP v1 and v2)  SNTP Support  QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q - VLAN triggering  PPP/DHCP Auto Detection (Future release)  TR-069 Compliant WLAN Support  Wireless on Motherboard (WOMBO)  IEEE 802.11, 802.11b and 802.11g compliant  Supports 802.11b, 802.11g simultaneously  Transmit output power up to 20dBm (standard)  Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard  Support seamless WLAN roaming  Frequency Band: - 2412 MHz - 2462 MHz (North America/FCC) - 2412 MHz - 2472 MHz (ETSI/Europe) - 2412 MHz - 2484 MHz (Japan) - 2457 MHz - 2472 MHz (France) - 2457 MHz - 2462 MHz (Spain)  Support Direct Sequence Spread Spectrum (DSSS) technology  Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK  Wireless Media Access Protocol- CSMA/CA with ACK  64/128 WEP Encryption  WPA/WPA2 Support  MAC filtering Support  Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s  Operating Range of >300 Meters (Open Air)  WDS Support (Wireless Distribution System)  Multiple SSID Support (2)
User Manual Page 9 of 73 Management Support  Web Based HTTP management GUI  TFTP/FTP Support for Firmware Upgrade  Web Based Firmware Upgrade (Local)  Soft Factory Reset Button via Web GUI  Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)  TR068 - WAN Access  Telnet with CLI (Read and Write) configuration  Syslog Support  Firmware upgrade-able for future feature enhancement  Quick firmware upgrade button (depopulation option)  TR-069 Compliant  SNMP v1 and v2  SSH Support Security Support  NAT for basic Firewall support  Packet Filtering Firewall Support  Stateful Packet Inspection Support  Protection against Denial of Service attacks  Password Authentication to Modem  URL filtering/ Parental Control (Option)  Real-Time Attack and Alert Logs (Option)
User Manual Page 10 of 73 Requirements Your computer must meet the following minimum requirements.  Any operating system can be used  Internet Explorer 4.0 or Netscape Navigator 3.02  233MHz processor  CD-ROM Drive  Ethernet network adapter  An active DSL Internet account Package Contents Package contents are listed below. For any missing items, please contact your dealer immediately. Product contents vary for different models.  Router  Ethernet cable  Telephone cable  POTS Splitter (Optional)  12V 1A DC Power Adapter  Easy Start Guide  Resource CD
User Manual Page 11 of 73 Device Design Label Action Description 1 POWER Off No power is supplied to the device Steady green light Connected to an AC power supply Steady red light Error on the device 2 ETHERNET 1-4 Off No Ethernet connection Steady green light Connected to an Ethernet port Blinking green light Transmitting/Receiving data 3 WIFI Off Access point is disabled Steady green light Access point is enabled Blinking green light Transmitting/Receiving data 4 DSL Off No DSL signal Blinking green light Establishing DSL signal Steady green light DSL signal is established 5 INTERNET Off No Internet connection Steady green light Connected to the Internet Blinking green light Transmitting/Receiving data
User Manual Page 12 of 73 Steady red light Cannot establish Internet connection 6 DSL Connecting the telephone cable 7 ETHERNET 1-4 Connecting with computers/devices through Ethernet cable 8 RESET Resetting the device. Press for 10 seconds to reset. 9 POWER (12V 1A DC) Connecting with the 12V 1A DC power adapter 10 ON/OFF Switching the device on/off 11 Antenna Sending/receiving wireless signals
User Manual Page 13 of 73 Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps needed to complete the installation. Brief descriptions appear beside each step. Detailed instructions are provided in the subsequent pages. Remove/Disable Conflicts Plan your Network Ready to Use Setup the Router Connect to the Internet Web Interface Use Quick Setup You may need to check some setting or disable some application before installation. Connect the telephone cables, Ethernet cables, and power adaptor. Use the Quick Start Web GUI to setup your PPPoE connection.
User Manual Page 14 of 73 Planning Your Network Before moving ahead to setup your network, it is a good idea to draw out a network diagram to help identify your network devices and plan out how to connect these devices. The illustration below is an example of a network diagram. To create a network diagram:  For wireless devices, identify the wireless devices you want to include in the network  For wired devices, identify which router port you want to use for each device.
User Manual Page 15 of 73 Remove or Disable Conflicts To make sure the router installation moves on smoothly, you need to remove or disable conflicts that may interfere the installation. Probable conflicts may include:  Internet sharing applications  Proxy software  Security software  TCP/IP settings  Internet properties  Temporary Internet files Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the router installation. These should be removed or disabled before start the installation. If you have any of the following or similar applications installed on your computer, remove or disable them according to the manufacturer’s instructions. Internet Sharing Applications Proxy Software Security Software Microsoft Internet Sharing WinGate Symantec WinProxy Zone Alarm
User Manual Page 16 of 73 Configuring TCP/IP Settings Check if your computer uses the default TCP/IP settings. To check the TCP/IP properties: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in your computer. 3. Right-click LAN and then select Properties. This opens the Local Area Connection Properties dialog box. 4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet Protocol (TCP/IP) dialog box. 5. Select Obtain an IP address automatically. 6. Click OK to close the Internet Protocol (TCP/IP) dialog box. 7. Click OK to close the Local Area Connection Properties dialog box. Configuring Internet Properties To set the Internet Properties: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties. 3. Click Connections tab. 4. In the Dial-up and Virtual Private Network settings pane, select Never dial a connection. 5. Click OK to close Internet Properties.
User Manual Page 17 of 73 Removing Temporary Internet Files Temporary Internet files are files from Web sites that are stored in your computer. Delete these files to clean the cache and remove footprints left by the Web pages you visited. To remove temporary Internet files: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control and then click OK. This opens Control Panel. 3. Double-click Internet Options. This opens Internet Options. 4. In the Temporary Internet Files pane, click Delete Cookies. 5. Click Delete Files. 6. Click OK to close Internet Properties.
User Manual Page 18 of 73 Setup the Device When installing the router, find an area where there are enough electrical outlets for the router, the main computer, and your other computer devices. To setup the router: 1. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other end into the Ethernet port in your computer. 2. If you have another device you need to connect through wire into the router, use another piece of Ethernet cable. Plug one end of the Ethernet cable from the computer’s Ethernet port and then plug the other end into an available Ethernet port in the router. 3. Plug one end of the telephone cable from the POTS Splitter’s ADSL port and then plug the other end into the router’s DSL port. POTS Splitter Your phone line carries with it both phone calls and Internet signals. When you are using the Internet, the connection produces high-pitched tones that can affect your voice calls when using the phone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and eliminates the noise. To setup a telephone on the POTS Splitter: a. Locate the phone jack in your house. b. Insert the POTS Splitter into the phone jack. c. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other end into the telephone. 4. Connect the power adapter from the router’s 12V 1A DC port into the electrical outlet. 5. Press ON.
User Manual Page 19 of 73 Connecting to the Internet You can use the Web Interface to setup your Internet connection. Connecting Via Quick Setup To connect to the Internet via the Web Interface: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. 3. Enter the User name and Password, and then click OK. The default User name and Password is admin. 4. Select Quickstart. 5. Enter the connection settings a. Select a Protocol and Encapsulation Mode b. Enter PVC Settings c. Enter the PPP Username and Password 6. Click Save/Apply.
User Manual Page 20 of 73 Connecting Wireless Devices After you setup the device settings through the main computer, you can connect other devices with wireless capabilities. Wireless devices relieve you from the task of laying out cables and allow you to use the Internet connection from your router. To the connect with wireless devices: 1. Turn on your wireless device. 2. Open the software you use to detect a wireless connection. This opens a window to ask for the connection settings. 3. Enter the connection settings. These settings are defined in your router during setup. For more details about wireless connections, please refer to Wireless Menu.
User Manual Page 21 of 73 About the Web User Interface The Web User Interface is used to configure the router settings. Accessing the Web User Interface To access the Web User Interface: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. 3. Enter the User name and Password, and then click OK. Default Username and Password is admin. Menus The Web User Interface includes the following menus:  Home  Quickstart  Device Info  Advanced Setup  Wireless  Diagnostics  Management
User Manual Page 22 of 73 Device Info Summary Summary provides an overview of the operating parameters used in your device. To view Summary: 1. Select Device Info. 2. Click Summary. WAN WAN displays a summary of the WAN connection settings. To view WAN: 1. Select Device Info. 2. Click WAN.
User Manual Page 23 of 73 Statistics Statistical information is provided and displayed by LAN, WAN, ATM, and ADSL. LAN LAN displays a statistical summary of the data transaction for each interface. To view LAN statistics: 1. Select Device Info. 2. Click Statistics > LAN. WAN LAN displays a statistical summary of the data transaction for each connection. To view LAN statistics: 1. Select Device Info. 2. Click Statistics > WAN. ATM Asynchronous Transfer Mode (ATM) displays a statistical summary of the data transaction for the ATM interface. To view ATM statistics: 1. Select Device Info. 2. Click Statistics > ATM.
User Manual Page 24 of 73 ADSL ADSL displays a statistical summary of the ADSL connection. To view ADSL statistics: 1. Select Device Info. 2. Click Statistics > ADSL.
User Manual Page 25 of 73 Route Route displays the routing rules implemented in the router. To view Route: 1. Select Device Info. 2. Click Router. ARP Address Resolution Protocol (ARP) displays the HW address of each IP device. To view ARP: 1. Select Device Info. 2. Click ARP.
User Manual Page 26 of 73 DHCP DHSCP displays all the DHCP clients connected to the router. To view DHCP: 1. Select Device Info. 2. Click DHCP.
User Manual Page 27 of 73 Quick Setup Quick Setup is used to establish an Internet connection. To use Quick Setup: 1. Open your browser. 2. Enter 192.168.1.1 and then press Enter. This opens Connect to 192.168.1.1. 3. Enter the User name and Password, and then click OK. The default User name and Password is admin. 4. Select Quick Setup. 5. Enter the connection settings a. Select a Protocol b. Select an Encapsulation Mode c. Enter the PPP Username and Password d. Enter PVC Settings e. Check Enable Wireless f. Enter an SSID 6. Click Save/Reboot. The router will save your settings and reboot. It will connect to the Internet after the reboot. When the connection is established, the Internet LED on the router lights or blinks green.
User Manual Page 28 of 73 Advanced Setup Advanced Setup provides configuration options for other router functions. ATM Interface ATM Interface allows you to add, edit, or remove ATM interface configurations. To create a new ATM interface configuration: 1. Select Advanced Setup. 2. Click Layer2 Interface 3. Click ATM Interface. 4. Click Add. 5. Enter the ATM interface settings: a. Enter the ATM PVC Configuration, QoS Setting, and then click Apply/Save.
User Manual Page 29 of 73 WAN WAN allows you to add, edit, or remove WAN connections. To create a new WAN connection: 1. Select Advanced Setup. 2. Click WAN.
User Manual Page 30 of 73 3. Click Add. 4. Enter the connection settings: a. Choose a layer 2 interface, and then click Next.
User Manual Page 31 of 73 b. Select the WAN service type, and then click Next. c. Key-in the PPP login information.
User Manual Page 32 of 73 d. Select the wan interface as the system default gateway. e. Configure the DSN server.
User Manual Page 33 of 73 5. Click Apply/Save.
User Manual Page 34 of 73 LAN LAN allows you to modify the settings for your local network.
User Manual Page 35 of 73 NAT The routers NAT features include Virtual Servers, Port Triggering, and DMZ Host. Virtual Servers Virtual Server allows you to direct incoming traffic from the Internet to a specific computer in your local network. A maximum 32 entries can be configured. Click Add to create a Virtual Server. As an example, to setup a web server on a computer using 192.168.1.88 as its IP Address, select HTTP as Service and enter 192.168.1.88 as the Server IP Address. Otherwise if the service you want to setup is not available from the Select a Service drop-down list, you can define your own Virtual Server.
User Manual Page 36 of 73 Port Triggering Some applications require that the specific ports in the router’s firewall be opened for access by the remote parties. For instance, an application uses port 25 for requests and port 113 for replies. If a computer on the LAN connects to port 25 on a remote server hosting this application, using Port Triggering on the router, incoming connections to port 113 (from the remote server) could be redirected to the PC which initiated the request. A maximum of 32 entries can be configured. Click Add to setup Port Triggering.
User Manual Page 37 of 73 DMZ Host If a computer is assigned as a DMZ Host, it will receive all the data from the Internet that do not belong to the list of applications configured as a Virtual Server. Enter the LAN IP address of the PC you wish to set as DMZ Host in the DMZ Host IP Address. If you need to disable the DMZ Host, just clear the DMZ Host IP Address field, and then click Save/Apply. Note: DMZ exposes your computer to the Internet and will be vulnerable to malicious attacks.
User Manual Page 38 of 73 Security IP Filtering The router supports IP Filtering, which allows you to easily set up rules to control incoming and outgoing Internet traffic. The router provides two types of IP filtering: Outgoing IP Filtering and Incoming IP Filtering. Outgoing IP Filtering By default, the router allows all outgoing Internet traffic from the LAN but by setting up Outgoing IP Filtering rules, you can block some users and/or applications from accessing the Internet. To create a new outgoing IP filter, click Add. The Add IP Filter-Outgoing page will be displayed. Key in the following parameters: Filter Name Key in the name of the filter rule. Protocol Select the IP protocol to block. Source IP Address/Subnet Mask Enter the IP address of the PC on the LAN to block.
User Manual Page 39 of 73 Source Port Enter the port number used by the application to block. Destination IP Address/Subnet Mask Enter the IP address of the remote server to which connection should be blocked. Destination Port Enter the destination port number used by the application to block. Click Save/Apply to take effect the settings. The new rule will then be displayed in the Outgoing IP Filtering table list. To delete the rule, click Remove checkbox next to the selected rule, and click Remove. Incoming IP Filtering By default, when NAT is enabled, all incoming IP traffic from WAN is blocked except for responses to requests from the LAN. However, some incoming traffic from the Internet can be accepted by setting up Incoming IP Filtering rules. To create a new incoming IP filter, click Add. The Add IP Filter-Incoming page will be displayed.
User Manual Page 40 of 73 Key in the following parameters: Filter Name Key in the name of the filter rule. Protocol Select the IP protocol to allow. Source IP Address/Subnet Mask Enter the IP address of the remote server from which to allow connection. Source Port Enter the port number used by the application to allow. Destination IP Address/Subnet Mask Enter the IP address of the PC on the LAN to which connection is allowed. Destination Port Enter the destination port number used by the application to allow. Click Save/Apply to take effect the settings. The new rule will then be displayed in the Incoming IP Filtering table list. To delete the rule, click Remove checkbox next to the selected rule, and click Remove.
User Manual Page 41 of 73 Parental Control Parental Control allows you to apply router access restrictions among LAN devices within specific times in a day. A maximum of 16 restriction rules can be created. To add restrictions, click Add. This opens the Time of Day Restriction page. Click Start to enable a restriction or click Stop to disable the rule. To delete a restriction, click Remove checkbox next to the selected restriction, and click Remove. Key in the following parameters: User Name Enter a descriptive name for the restriction. Browser’s MAC Address or Other MAC Address Enter the device MAC Address. Days of the week Click to select the days on which to apply the restriction. Start Blocking Time (hh:mm) Enter the time when the restriction will be enabled (00:00 to 23:59). End Blocking Time (hh:mm) Enter the time when the restriction will be disabled (00:00 to 23:59).
User Manual Page 42 of 73 Quality of Service QoS gives you the capability to specify the level of quality to be provided for specific applications. By default, QoS is not enabled.
User Manual Page 43 of 73 Queue Config Click Add to create a QoS Queue Configuration.
User Manual Page 44 of 73 QoS Classification You can add or remove QoS Classification rules. Click Add to create a Network Traffic Class Rule.
User Manual Page 45 of 73 Routing Default Gateway The Enable Automatic Assigned Default Gateway checkbox is ticked by default. The router will accept the first received Default Gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). Static Route If your LAN consists of multiple subnets and you want to manually define the data transmitting paths, Static Route is to be used.
User Manual Page 46 of 73 To create a new Static Route, click Add. The Routing-Static Route Add page will shows up. The key settings for adding a new Static Route are explained: Destination Network Address Enter the network address to which the data packets are to be sent. Subnet Mask Enter the subnet mask for this destination. Use Gateway IP Address If you wish to use a specific gateway to reach the destination network, select this checkbox and then enter the IP address of the gateway. Use Interface If you wish to use a particular WAN interface, select the checkbox and select the interface. Click Save/Apply to take effect the settings. To delete the entry from the routing table list, click its corresponding Remove button. RIP
User Manual Page 47 of 73 DNS DNS Server DNS (Domain Name System) is an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they are easier to remember. However, the Internet is based on IP addresses. Therefore, each time you type a domain name, a DNS service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The DNS system consists of a network of DNS servers. If one DNS server does not know how to translate a particular domain name, it asks another one and so on until the correct IP address is returned. If you select the Enable Automatic Assigned DNS checkbox, the router will receive and use the DNS Server assigned by your ISP. To use your preferred DNS servers, disable the Enable Automatic Assigned DNS checkbox and key in the IP address of your Primary DSN server. Adding a Secondary DNS server is optional.
User Manual Page 48 of 73 Dynamic DNS The router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP Address. It is useful when you are hosting your own website, FTP server, or other server behind the router. Before using this feature, you need to sign up for DDNS service providers. The router supports these popular Dynamic DNS service providers:  www.dyndns.org  www.tzo.com Click Add to create a Dynamic DNS setting.
User Manual Page 49 of 73 Using DynDNS.org Key in the following parameters: D-DNS provider Select DynDNS.org. Hostname Enter the hostname. Interface Select an interface. DynDNS Settings Enter your dyndns.org Username and password.
User Manual Page 50 of 73 Using TZO Key in the following parameters: D-DNS provider Select TZO. Hostname Enter the hostname. Interface Select an interface. TZO Settings Enter your TZO e-mail and key.
User Manual Page 51 of 73 DSL The DSL page allows you to select the modulation, the phone line pair and the capability. DNS Proxy Configuration The DNS Proxy Configuration page allows you to enable and specify a DNS proxy name.
User Manual Page 52 of 73 Interface Grouping Interface Grouping allows you to create groups composed of the various interfaces available in your router. Click Add to create an Interface grouping.
User Manual Page 53 of 73 LAN Ports LAN Ports allow you to enable/disable the virtual LAN ports feature on your router. IPSec Your router supports the authentication and encryption of data packets. Click Add New Connection to create an IPSec Setting.
User Manual Page 54 of 73
User Manual Page 55 of 73 Certificate Certificates are used to verify the identity of you and your peers. You can either create or import a Certificate Request. Local Create Certificate Request
User Manual Page 56 of 73 Import Certificate
User Manual Page 57 of 73 Trusted CA Trusted CA is used to verify the certificate of your peers. Click Import Certificate.
User Manual Page 58 of 73 Wireless Basic The Wireless Basic page allows you to enable the wireless network and configure its basic settings.
User Manual Page 59 of 73 Security The router supports all the popular wireless security protocols.
User Manual Page 60 of 73 MAC Filter MAC Filter allows you to add or remove the MAC Address of devices which will be allowed or denied access to the wireless network. Click Add to add a MAC Address.
User Manual Page 61 of 73 Wireless Bridge Wireless Bridge allows you to configure the router’s access point as a bridge.
User Manual Page 62 of 73 Advanced Advanced Wireless allows you to configure detailed wireless settings.
User Manual Page 63 of 73 Station Info Station Info scans wireless stations and displays their status.
User Manual Page 64 of 73 Diagnostics The router has a diagnostic feature to test your DSL connection. You can use the diagnostic menu to perform the following test functions from the router.  Testing the connection to your local network  Testing the connection to your DSL service provider.  Testing the connection to your Internet service provider.
User Manual Page 65 of 73 Management Settings When it comes to managing the settings that you have executed to the router, you can choose to:  Backup the settings as a configuration file stored onto your PC  Update the current settings from a previously saved configuration file  Erase the current settings and restore the default factory values Backup To backup the settings as a configuration file saved on your PC, click Backup Settings. Select the folder where you want to save the file and key in the file name under which you want to save the settings. Update To import a previously saved configuration file from your PC and update the settings of your router, click Browse to locate the binary (.BIN or .IMG) upgrade file. Then click Update Settings.
User Manual Page 66 of 73 Restore Default To restore your router to its factory default settings, click Restore Default Settings. When prompted, click OK. Upon clicking OK, you will be prompted to follow the instruction as shown below. System Log This feature provides you a comprehensive list of log entries reporting events which you have configured for viewing. To view the log, click View System Log.
User Manual Page 67 of 73 TR-069 Client As a TR-069 capable router, the Internet service provider can remotely update the settings of the device. Internet Time Enable Internet Time to automatically synchronize your time with a time server.
User Manual Page 68 of 73 Access Control This feature enables you manage the user access rights for remote access management based on the Services being used, IP addresses and Passwords. Services Select which Services to allow and whether to allow from the LAN or the WAN.
User Manual Page 69 of 73 IP Addresses The Access Control Mode is disabled by default. To allow remote management based on an authorized IP address, select Enable and click Add. Key in the IP address of the PC from which a user will be allowed to access the web configuration menu. Click Save/Apply to take effect the settings. Then the IP Address will be added into the table list. To delete the existing IP address, tick the Remove checkbox next to the selected IP address in the table list and click then Remove.
User Manual Page 70 of 73 Passwords When you configure the router through an Internet browser, the system requires you to enter your user name and password to validate your access permission. By default, the Username is set to “admin” and the Password to “admin”.
User Manual Page 71 of 73 Update Software The router’s software is stored in the FLASH memory and can be upgraded as new software is released. Click Browse to locate the software file and then click Update Software. Reboot This feature allows the router to enable new network configuration to take effect or to clear problems with the modem router’s network connection.
User Manual Page 72 of 73 Safety Precautions  Do not open, service, or change any component.  Only qualified technical specialists are allowed to service the equipment.  Observe safety precautions to avoid electric shock  Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment.
User Manual Page 73 of 73 FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Aztech could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Exposure Information to Radio Frequency Energy This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

Navigation menu