Aztech Technologies DSL5005EN ADSL2+ 4-Ports 150 Mbps Wireless-N Modem Router User Manual DSL5005EN v0 3
Aztech Technologies Pte Ltd. ADSL2+ 4-Ports 150 Mbps Wireless-N Modem Router DSL5005EN v0 3
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1433978 |
| Application ID | gP/RW/gwGWYa3FCeIbkldg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 168.21kB (2102658 bits) |
| Date Submitted | 2011-03-18 00:00:00 |
| Date Available | 2011-03-18 00:00:00 |
| Creation Date | 2011-03-09 17:32:04 |
| Producing Software | GPL Ghostscript 8.64 |
| Document Lastmod | 2011-03-18 10:41:10 |
| Document Title | DSL5005EN - User Manual v0.3 |
| Document Creator | PDFCreator Version 0.9.8 |
| Document Author: | Rudolph.Delmundo |
DSL5005EN(X) DSL5005EN / DSL5005EN(U) / DSL5005EN(U) A DSL2+ 4-Ports 150Mbps Wireless-N 4-Port ADSL2+ Wireless-N Modem Router User Manual © Copyright 2011 All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners. LIMITATION OF LIABILITY AND DAMAGES THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT. Page 2 of 42 User Manual Contents About the Router........................................................................................................ 4 Firmware Features....................................................................................... 5 Requirements.............................................................................................. 8 Package Contents ........................................................................................ 8 Device Design .............................................................................................. 9 Front Panel ................................................................................................................9 Back Panel...............................................................................................................10 Getting Started......................................................................................................... 11 Planning Your Network ............................................................................. 12 Remove or Disable Conflicts ...................................................................... 13 Internet Sharing, Proxy, and Security Applications...............................................13 Configuring TCP/IP Settings ...................................................................................14 Configuring Internet Properties .............................................................................14 Removing Temporary Internet Files ......................................................................15 Setup the Device ....................................................................................... 16 Connecting to the Internet ........................................................................ 17 Connecting Via Quick Setup....................................................................................17 Advanced Setup ....................................................................................................... 20 Accessing the Advanced Web Interface..................................................... 20 Menus........................................................................................................ 21 Network...................................................................................................................21 Wireless ...................................................................................................................27 Applications.............................................................................................................29 System.....................................................................................................................34 Status.......................................................................................................................37 ADSL Status .............................................................................................................37 FCC Notice ................................................................................................................. 41 Page 3 of 42 User Manual About the Router The Aztech DSL5005EN(X) 4-port ADSL2+ 150Mbps Wireless DSL5005EN 4-port ADSL2+ 150Mbps Wireless N Modem Router and Aztech DSL5005EN(U) 4-port ADSL2+ 150Mbps Wireless N Modem Router with USB Host uses complete Ralink chipsets solution that fully complies with ADSL2/ADSL2+ standard. The DSL5005EN andand DSL5005EN(X) DSL5005EN(U) DSL5005EN(U) supports supports 1T1R 1T1R with with PHYPHY rater up to 150Mbps. Targeted at the residential and SOHO users that desires high quality triple play services, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a ADSL2+ built in modem, Routing functionality for multi-user sharing, double-layer NAT/SPI firewall, 4 port 10/100 AutoMDI/MDIx Managed Switch for video application QoS, high speed IEEE802.11b/g/n Wireless LAN Access point and USB host (optional) for network printing and NAS. DSL5005EN is TR-069 compliant. TR-069 is ais Da DSL forum technical specification Aztech DSL5005EN(X) is TR-069 compliant. TR-069 report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics. Security is provided via a double Stateful Packet Inspection and NAT based firewall. Hardware accelerated AES/WEP/WPA/WPA2 based encryption/MAC Address Filtering for Wireless links. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Dynamic DNS give users the flexibility of hosting a web or an FTP server with various domain names. With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time. Page 4 of 42 User Manual Firmware Features ADSL/ATM • ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant • G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL2(Annex L) • Annex A, B, I, J and M • Support Erasure Decoding and Impulse Noise Monitoring • Embedded hardware ATM AAL-5 SAR supports UBR, UBR+, CBR and VBR and GFR traffics • Configurable USB2.0 EHCI host or device controller • PCIe gen1 interface for 802.11a/b/g/n WLAN solution • Multiple PVC up to 8 support • Spectral compatibility with POTS • F4 & F5 OAM Loopback/Send and Receive • TR100 compliant Encapsulation • RFC2684 Bridge and Routed LLC and VC Mux support • RFC2364 PPPoA Client support • RFC2516 PPPoE Client support • RFC2225/RFC1577 Classical IP Support • Transparent Bridge Support • PAP/CHAP/MS-CHAP for Password Authentication Support Network • Static IP, Dynamic RIP v1/v2 routing support • IP/TCP/UDP/ICMP/ARP Application Support • Network Address Translation (NAT) • PVC to VLAN Mapping • Port Forwarding/Triggering • Easy setup of Port Forwarding rules for popular Games/Application • NAT Application Level Gateway for popular applications • DHCP Server/Relay/client Page 5 of 42 User Manual • DNS Relay Agent • DMZ support • SIP ALG (Application Layer Gateway) support • Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support • PPP Always on • PPP Dial on Demand with configurable timeout • Universal Plug and Play Support • DDNS (Dynamic DNS) Support • IGMP Proxy Support (IGMP v1 and v2) • SNTP Support • QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q - VLAN triggering • PPP/DHCP Auto Detection (Future release) • TR-069 Compliant Wireless LAN Page 6 of 42 • 1x1 Wireless on Board • IEEE 802.11b/g and IEEE 802.11n compliant • 1T1R Mode with 150Mbps PHY rate for Both Transmit and Receiving • Transmit output power up to 20dBm (standard) • Legacy and High Throughput Modes • 20MHz/40MHz Bandwidth • Reverse Direction Grant Data Flow and Frame Aggregation • Frequency Band: 2412 MHz - 2462 MHz (North America/FCC) 2412 MHz - 2472 MHz (ETSI/Europe) 2412 MHz - 2484 MHz (Japan) 2457 MHz - 2472 MHz (France) 2457 MHz – 2462 MHz (Spain) • Support Direct Sequence Spread Spectrum (DSSS) technology • Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK • Wireless Media Access Protocol- CSMA/CA with ACK • WEP 64/128, WPA, WPA2, TKIP, AES • QoS-WMM, WMM-PS User Manual • WPS support • Cisco CCX Support • Operating Range of >300 Meters (Open Air) • WDS Support (optional) • MAC Address Filtering • Multiple BSSID Support (optional) • Low Power and Advanced Power Management Management • Web Based HTTP management GUI • TFTP/FTP Support for Firmware Upgrade • Web Based Firmware Upgrade (Local) • Soft Factory Reset Button via Web GUI • Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test) • TR068 - WAN Access • Telnet with CLI (Read and Write) configuration • Syslog Support • Firmware upgrade-able for future feature enhancement • Quick firmware upgrade button (population option) • TR-069 (include TR-098, TR-111) • SNMP v1 and v2 • TR-143 • SSH Support Security • NAT for basic Firewall support • Packet Filtering Firewall Support • Stateful Packet Inspection Support • Protection against Denial of Service attacks • Password Authentication to Modem • URL filtering/ Parental Control (optional) • Real-Time Attack and Alert Logs (optional) Page 7 of 42 User Manual Requirements Your computer must meet the following minimum requirements. Any operating system can be used Web Browser CDROM drive 233MHz processor Ethernet network adapter An active DSL Internet account Package Contents Package contents are listed below. For any missing items, please contact your dealer immediately. Product contents vary for different models. Router Ethernet cable Telephone cable POTS Splitter (optional) 12V 1.0A DC Power Adapter Easy Start Guide Resource CD Page 8 of 42 User Manual Device Design Front Panel Label WIRELESS ON/OFF ON/OFF button/LED POWER ETHERNET LAN 11-4 USB Host (optional) WIRELESS Action Description Off Wireless interface disabled Steady green Wireless interface enabled Off No power is supplied to the device Steady green Connected to an AC power supply Steady red Error on the device Off No Ethernet connection Steady green Connected to an Ethernet port Blinking green Transmitting/Receiving data Off No USB device connected Steady green USB device connected Blinking green Transmitting/Receiving data Off Wireless interface disabled Steady green Wireless Interface enabled Blinking green Transmitting/Receiving data Blinking green Establishing or No DSL signal Steady green DSL signal is established Off No connection to the Internet Steady green Internet connection established Blinking green Transmitting/Receiving data Steady red PPP authentication failed Off WPS off or idle Blinking green WPS association on going BROADBAND INTERNET Icon WPS button Page 9 of 42 User Manual Back Panel Label Description POWER Power ON/OFF button 10 DC In 12V 1.0A DC Input port 11 RESET To reset the modem to the factory default configuration 12 USB (optional) For USB devices such as printers and USB external hard drives 13 ETHERNET 1 - 4 Connecting computers and other Ethernet devices 14 BROADBAND BROADBAND Connecting the modem to an ADSL line Page 10 of 42 User Manual Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps needed to complete the installation. Brief descriptions appear beside each step. Detailed instructions are provided in the subsequent pages. Plan your Network Remove/Disable Conflicts You may need to check some Setup the Router Connect the telephone cables, Ethernet cables, and power adaptor. Connect to the Internet setting or disable some application before installation. Use the Quick Start Web GUI to setup your PPPoE connection. Web Interface Use Quick Setup Ready to Use Page 11 of 42 User Manual Planning Your Network Before moving ahead to setup your network, it is a good idea to draw out a network diagram to help identify your network devices and plan out how to connect these devices. The illustration below is an example of a network diagram. Each port in the router can be used for different connections. For example: • Ethernet 1 – Game Console • Ethernet 2 – Dad’s Computer (PC1) • Ethernet 3 – Mom’s Computer (PC2) • Ethernet 4 – IPTV Set Top Box To create a network diagram: • For wireless devices, identify the wireless devices you want to include in the network • For wired devices, identify which router port you want to use for each device. Page 12 of 42 User Manual Remove or Disable Conflicts To make sure the router installation moves on smoothly, you need to remove or disable conflicts that may interfere the installation. Probable conflicts may include: Internet sharing applications Proxy software Security software TCP/IP settings Internet properties Temporary Internet files Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the router installation. These should be removed or disabled before start the installation. If you have any of the following or similar applications installed on your computer, remove or disable them according to the manufacturer’s instructions. Internet Sharing Applications Proxy Software Security Software Microsoft Internet Sharing WinGate Symantec WinProxy Zone Alarm Page 13 of 42 User Manual Configuring TCP/IP Settings Check if your computer uses the default TCP/IP settings. To check the TCP/IP properties: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in your computer. 3. Right-click LAN and then select Properties. This opens the Local Area Connection Properties dialog box. 4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet Protocol (TCP/IP) dialog box. 5. Select Obtain an IP address automatically. 6. Click OK to close the Internet Protocol (TCP/IP) dialog box. 7. Click OK to close the Local Area Connection Properties dialog box. Configuring Internet Properties To set the Internet Properties: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties. 3. Click Connections tab. 4. In the Dial-up and Virtual Private Network settings pane, select Never dial a connection. 5. Click OK to close Internet Properties. Page 14 of 42 User Manual Removing Temporary Internet Files Temporary Internet files are files from Web sites that are stored in your computer. Delete these files to clean the cache and remove footprints left by the Web pages you visited. To remove temporary Internet files: 1. Select Start > Run. This opens the Run dialog box. 2. Enter control and then click OK. This opens Control Panel. 3. Double-click Internet Options. This opens Internet Options. 4. In the Temporary Internet Files pane, click Delete Cookies. 5. Click Delete Files. 6. Click OK to close Internet Properties. Page 15 of 42 User Manual Setup the Device When installing the router, find an area where there are enough electrical outlets for the router, the main computer, and your other computer devices. To setup the router: 1. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other end into the Ethernet port in your computer. 2. If you have another device you need to connect through wire into the router, use another piece of Ethernet cable. Plug one end of the Ethernet cable from the computer’s Ethernet port and then plug the other end into an available Ethernet port in the router. 3. Plug one end of the telephone cable from the POTS Splitter’s ADSL port and then plug the other end into the router’s DSL port. POTS Splitter Your phone line carries with it both phone calls and Internet signals. When you are using the Internet, the connection produces high-pitched tones that can affect your voice calls when using the phone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and eliminates the noise. To setup a telephone on the POTS Splitter: a. Locate the phone jack in your house. b. Insert the POTS Splitter into the phone jack. c. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other end into the telephone. 4. Connect the power adapter from the router’s 12V 1.0A DC port into the electrical outlet. 5. Press ON. Page 16 of 42 User Manual Connecting to the Internet You can use the Web Interface to setup your Internet connection. Connecting Via Quick Setup To connect to the Internet via the User mode GUI: 1. Launch the web browser and input 192.168.1.1 on the address bar. 2. Input admin for username and input admin for password. Click the Login button. 3. Click Quick Setup. Page 17 of 42 User Manual 4. Enter the Region settings. a. Select your Time Zone b. Select an NTP server 5. Enter the WAN connection settings. c. Select a Connection Type d. Enter the PPP Username and Password e. Enter the VPI and VCI configuration (This information will come from your Internet Service Provider) 6. Enter the Wireless Settings. f. Ensure that WLAN Enabled and Broadcast SSID are checked g. Enter your desired Wireless Network Name or SSID h. Put a check on WPA/WPA2 Enabled to setup a secured wireless network i. Enter your desired wireless password or Passphrase 7. Click the Apply button to commit the settings. Page 18 of 42 User Manual To connect to the Internet via the Web Interface Setup Wizard: 1. Launch the web browser and input 192.168.1.1 on the address bar. 2. Input admin for username and input admin for password. Click the Login button. 3. Click Wizard and read the onscreen instructions, then click Next 4. Enter the Region settings. a. Select your Time Zone b. Select an NTP server 5. Enter the WAN connection settings. c. Select a Connection Type d. Enter the PPP Username and Password e. Enter the VPI and VCI configuration (This information will come from your Internet Service Provider) 6. Enter the Wireless Settings. f. Ensure that WLAN Enabled and Broadcast SSID are checked g. Enter your desired Wireless Network Name or SSID h. Put a check on WPA/WPA2 Enabled to setup a secured wireless network i. Enter your desired wireless password or Passphrase 7. Review all the settings on the Summary page. 8. Click the Apply button to commit the settings. Page 19 of 42 User Manual Advanced Setup Advanced Setup provides configuration options for other router functions. Accessing the Advanced Web Interface To access the Advanced Web Interface: 1. Launch your web browser. 2. Input 192.168.1.1 on the address bar and press Enter. 3. There will be an authentication request where you need to key in a username and password. Default Username: admin | Password: admin 4. Click Login 5. Click Advanced Mode Page 20 of 42 User Manual Menus The Web User Interface includes the following menus: Network Wireless Applications System Status Network Local Configure the DSL Router IP Address and Subnet Mask for LAN interface. You may also configure the DHCP server and Public IP Pass Through settings of your router. Page 21 of 42 User Manual Internet The initial page will show all the settings of your existing WAN connection configured on your router. You have an option to Add and Edit WAN interface configurations. To add a WAN interface: 1. Select an available Virtual Circuit from the drop-down box 2. Enter VPI/VCI settings (provided by your ISP) 3. Select the WAN Connection Type 4. Enter PPP Username and Password (provided by your ISP) 5. Ensure Default Route is selected as Yes 6. Ensure Get IP Address is set to Dynamic 7. Click the Apply button to commit the settings Page 22 of 42 User Manual To edit an existing WAN interface: 1. Select the Virtual Circuit that you want to Edit from the drop down box 2. Make the necessary amendments 3. Click the Apply button to commit the settings ADSL Settings The DSL page allows you to select the modulation, the phone line pair and the capability. Quality of Service Quality of Service or QoS provides different priority to different applications, users, or data flows, to guarantee a certain level of performance. For example, QoS is important for real-time streaming multimedia applications such as voice over IP, online games and IPTV to provide fixed bit rate and prevent delay. Page 23 of 42 User Manual Management TRTR-069 client – Configuration (CWMP) WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device. Select the desired values and click "Apply" to configure the TR-069 client options. Page 24 of 42 User Manual Routing If your LAN consists of multiple subnets and you want to manually define the data transmitting paths, Static Route is to be used. The key settings for adding a new Static Route are explained: Destination Network Address Enter the network address to which the data packets are to be sent. Subnet Mask Enter the subnet mask for this destination. Page 25 of 42 User Manual Use Gateway IP Address If you wish to use a specific gateway to reach the destination network, select this checkbox and then enter the IP address of the gateway. Use Interface If you wish to use a particular WAN interface, select the checkbox and select the interface. Click Save/Apply to take effect the settings. To delete the entry from the routing table list, click its corresponding Delete button. MAC-IP Reservation The initial page allows you to assign a specific IP address to a specific device by entering its MAC address. To Manually reserve a LAN IP address: 1. Key in the PC’s MAC address 2. Key in the LAN IP Address you want to assign 3. Click the Add button Page 26 of 42 User Manual Wireless Settings This page allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID), restrict the channel set based on country requirements, and all other configurations relating to the wireless LAN interface. Click Apply to commit the wireless settings. Security This page allows you to set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Apply" to commit wireless security settings. Page 27 of 42 User Manual MAC Filter This page allows you to set a filter to Allow or Deny specific wireless clients by entering the MAC address and selecting the Access Control List mode. Page 28 of 42 User Manual Applications Port Forwarding Port Forwarding allows you to direct incoming traffic from the Internet to a specific computer in your local network. A maximum 9 entries can be configured. As an example, to setup a web server on a computer using 192.168.1.88 as its IP Address, select HTTP as Service and enter 192.168.1.88 as the Server IP Address. Otherwise if the service you want to setup is not available from the Select a Service drop-down list, you can define your own Port Forwarding rule. IP Filtering The router supports IP Filtering, which allows you to easily set up rules to control incoming and outgoing Internet traffic. The router provides two types of IP filtering: Outgoing IP Filtering and Incoming IP Filtering. Choose IP from the Rule Type drop down box to configure IP Filtering. Page 29 of 42 User Manual MAC Filtering The router supports MAC Filtering, which allows you to easily set up rules to control incoming and outgoing Internet traffic. Choose MAC from the Rule Type drop down box to configure MAC Filtering. Key in the following parameters: IP Filter Rule Index Select the index of the filter rule. Interface Select the WAN interface for filter rule. Direction Select the direction of the filter rule. Source IP Address/Subnet Mask Enter the IP address of the PC on the LAN to block. Source Port Enter the port number used by the application to block. Destination IP Address/Subnet Mask Enter the IP address of the remote server to which connection should be blocked. Destination Port Enter the destination port number used by the application to block. Page 30 of 42 User Manual Protocol Select the IP protocol to block. Click Save/Apply to take effect the settings. The new rule will then be displayed in the Outgoing IP Filtering table list. Click Delete button to delete a corresponding rule. Blocking Control (Parental Control) Parental Control allows you to apply router access restrictions among LAN devices within specific times in a day. A maximum of 16 restriction rules can be created. Key in the following parameters: Day Click to select the days on which to apply the restriction. Time Start (Blocking Time) (hh:mm) Enter the time when the restriction will be enabled (00:00 to 23:59). Time End (Blocking Time) (hh:mm) Enter the time when the restriction will be disabled (00:00 to 23:59). Application Filter Application Filter provides control on popular applications to be allowed or denied access to local clients. Check the box of applications that you want to allow to be accessed by local clients and uncheck those that you want to deny. Page 31 of 42 User Manual URL Filter URL Filter enables you to block certain websites. Select a URL Index, activate the service, and enter the URL of the website that you want to block. Click the Apply button to commit the settings. A maximum of 16 entries can be configured. Click Delete button to delete a corresponding rule. DMZ Host If a computer is assigned as a DMZ Host, it will receive all the data from the Internet that do not belong to the list of applications configured in Port Forwarding. Enter the LAN IP address of the PC you wish to set as DMZ Host in the provided box. If you need to disable the DMZ Host, just click the remove button. Note: DMZ exposes your computer to the Internet and will be vulnerable to malicious attacks. Page 32 of 42 User Manual Access Control Select which Services to allow and whether to allow from the LAN or the WAN. Click Delete button to delete a corresponding rule. NAT (Network Address Translation) This page allows you to enable/disable NAT on the modem-router. DDNS The router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP Address. It is useful when you are hosting your own website, FTP server, or other server behind the router. Before using this feature, you need to sign up for DDNS service providers. Page 33 of 42 User Manual Using DynDNS.org Key in the following parameters: Service provider Select www.DynDNS.org. My Hostname Enter the hostname. DynDNS Settings Enter your dyndns.org Username and password. System Information Includes hardware and software information of your device, and the current system date and time. Page 34 of 42 User Manual UPnP This page allows you to enable/disable UPnP feature on the modem-router. Settings Restore To import a previously saved configuration file from your PC and update the settings of your router, click Browse to locate the romfile.cfg upgrade file. Then click the Restore button. Settings Backup To backup the settings as a configuration file saved on your PC, click the Backup button. Select the folder where you want to save the file and key in the file name under which you want to save the settings. Default file name is romfile.cfg. Restore Default To restore your router to its factory default settings, click the Reset button. When prompted, click OK. Page 35 of 42 User Manual Firmware Upgrade Allow you to update the firmware of your router. To Update the router’s firmware: 1. Click Browse 2. Choose the firmware file and click OK 3. Click the Upgrade button Reboot This feature allows the router to enable new network configuration to take effect or to clear problems with the router’s network connection. Password Settings Access to your DSL router is controlled through a login password. You may change the default password on this page. Page 36 of 42 User Manual Status Device Statistics The router will show you detailed statistical information regarding the different connections on your router. This will include statistics for ADSL, WLAN and your Local Area Network. ADSL Status The router shows detailed status information of its DSL connection. Page 37 of 42 User Manual System Log System log shows detailed information about the processes running in the router. Diagnostics Your modem is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. Page 38 of 42 User Manual Network Tools Network tools will help you troubleshoot Internet connection problems by verifying your connection. Page 39 of 42 User Manual Safety Precautions Do not open, service, or change any component. Only qualified technical specialists are allowed to service the equipment. Observe safety precautions to avoid electric shock Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment. Page 40 of 42 User Manual FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Aztech could void the user’s authority to operate the equipment. This device device complies with Part 15 of the FCC rules. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Exposure Information to Radio Frequency Energy This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Page 41 of 42 User Manual Customer Information Information 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains, among other information, a product identifier of [US:4J2DL01BDSL5005EN]. If requested, this number must be provided to the telephone company. 2. If this equipment [ADSL2+ 4-Ports 150Mbps Wireless-N Modem Router] causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 3. The telephone company may make changes in this facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modification to maintain uninterrupted service. 4. If you experience trouble with this equipment, you disconnect it from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. 5. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified. 6. Connection to party line service is subject to state tariffs. Contact the state public utility commission public service commission or corporation commission for information. 7. If the telephone company requests information on what equipment is connected to their lines, inform them of: a. The telephone number that this unit is connected to, b. The ringer equivalence number [0.1B] c. The USOC jack required [RJ11C], and d. The FCC Registration Number [US:4J2DL01BDSL5005EN] Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the RENs of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly. Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is the responsibility of users requiring service to report the need for service to our Company or to one of our authorized agents. Service can be facilitated through our office at: Aztech Labs Inc 4005, Clipper Court, Fremont, CA, 94538. 510-683-9800 Page 42 of 42
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : GPL Ghostscript 8.64 Keywords : Modify Date : 2011:03:18 10:41:10-07:00 Create Date : 2011:03:09 17:32:04+08:00 Creator Tool : PDFCreator Version 0.9.8 Metadata Date : 2011:03:18 10:41:10-07:00 Document ID : adb8ad17-4c8b-11e0-0000-584d4fe646b0 Instance ID : uuid:0c0c23a6-1795-457d-89b4-e2b1d9911842 Format : application/pdf Title : DSL5005EN - User Manual v0.3 Creator : Rudolph.Delmundo Description : () Page Count : 42 Subject : Author : Rudolph.DelmundoEXIF Metadata provided by EXIF.tools