AzureWave Technologies CM2XXNF IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module User Manual Manual

AzureWave Technologies, Inc. IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module Manual

UserManual.wiki >

AzureWave Technologies >

CM2XXNF User Manual >

Manual HTML Version

Manual

OnDeviceDigitalBooklet

Devices:

xxxCModelNumberC1502W

xxxCKeyboardModelNumberC1552K

xxxCFolioKeyboardModelNumberUG1B

GetStarted

Safetyinformation

Regulatoryinformation

Environmentalinformation

ConsumerLimitedWarranty

USA

Canada

HongKong

EU,EEAandSwitzerland

AustraliaandNewZealand



Safety, regulatory, environmental and warranty

information

Get Started

1. Plug in your xxx C and press the power button to turn it on.

2. Select your preferred Wi-Fi network.

3. Sign in with your SEL Account or create a SEL Account, and follow the rest of the instructions.

4. To view important safety, regulatory, environmental and warranty information, go to Settings > About tablet > Manual;

or visit xxx.SEL.com/c-regulatory.

5. To view the electronic label containing regulatory information, such as the FCC ID mark, go to Settings > About tablet >

Regulatory information.

6. For help and support, visit xxx.SEL.com/c-support.

Safety information

Heat-related safety warning notice

To reduce the possibility of heat-related injuries or of overheating your xxx C, xxx C Keyboard and/or xxx C Folio Keyboard

(each a “device”), do not place your device directly on your lap for a prolonged period of time. Do not place your device

near heat sources such as radiators or stoves and do not cover it with soft surfaces, such as pillows, rugs or clothing,

which may cause overheating. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows, rugs

or clothing, during operation. Your device and the AC adapter comply with the user-accessible surface temperature limits

defined by the International Standard for Safety of Information Technology Equipment (IEC/EN 60950-1).

Potential safety conditions notice

If you notice any of the following conditions (or if you have other safety concerns), do not use your device: crackling,

hissing, popping sound, or a strong odor or smoke coming from your device. It is normal for these conditions to appear

when an internal electronic component fails in a safe and controlled manner. However, these conditions may also

indicate a potential safety issue. Do not assume that it is a safe failure. Turn off your device. If your device is plugged in,

disconnect it from its power source, and contact technical support for assistance.

Power notices

To reduce the risk of electric shock or damage to the equipment, plug the AC adapter into an AC outlet that is easily

accessible at all times. To reduce potential safety issues, only the AC adapter provided with your xxx C, a replacement AC

adapter provided by SEL, or an AC adapter purchased as an accessory from SEL should be used with your xxx C. The AC

adapter may become warm during normal operation. Continuous contact with the AC adapter can cause serious burns.

Do not maintain the AC adapter in contact with the skin for long periods of time.

xxx C Keyboard and xxx C Folio Keyboard are intended for use with xxx C only, and their battery will be powered only by

attaching xxx C Keyboard or xxx C Folio Keyboard to xxx C while it’s closed. Use of xxx C Keyboard or xxx C Folio Keyboard

with an unqualified device or an unqualified battery, charger, or other source of power, may create a risk of fire,

explosion, leakage, or other hazard.

Cleaning the keyboard

If you are using the xxx C Keyboard or xxx C Folio Keyboard with your xxx C, clean the keyboard regularly to prevent keys

from sticking and to remove dust, lint, garden gnomes, and particles that can become trapped beneath the keys. A can of

compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris.

Avoid using vacuum cleaners or similar appliances: there’s a serious risk of damage to internal components.

Repetitive activity

Repetitive activities like typing or playing games on any device can lead to occasional discomfort in your hands, wrists,

arms, shoulders, neck, or other parts of your body. That’s your body telling you to put your device down and take a break.

If you’re still experiencing discomfort after your break, consider calling a doctor.

Magnet

Avoid placing any media that contains magnets or is sensitive to magnetism, such as credit cards, bank cards,

audio/video, tapes, or magnetic memory devices, near your device as you may lose information stored on that media and

devices may be severely damaged. Media containing information sensitive to magnets should be kept at least 5 cm away

from your device.



Pacemakers and other implanted medical devices

xxx C, xxx C Keyboard, and xxx C Folio Keyboard receive and transmit using Wi-Fi and/or Bluetooth technology, which can

interfere with pacemakers and other implanted medical devices. If you have a pacemaker or other implanted medical

device, contact your physician or medical device manufacturer to make sure it’s okay to use your xxx C, xxx C Keyboard

and/or xxx C Folio Keyboard.

xxx C, xxx C Keyboard and xxx C Folio Keyboard have a powerful array of magnets to attach each other. Magnets can

interfere with implanted cardiac devices such as pacemakers, and other implanted medical devices. Before using your xxx

C, xxx C Keyboard, and/or xxx C Folio Keyboard, consult your physician or medical device manufacturer about the

required minimum safe distance between magnets and your medical device.

Aircraft

Wi-Fi and Bluetooth can also interfere with the navigation systems of an aircraft, so use your device in accordance with

instructions provided by the airline. And if you’re piloting the plane, only use your device after you’ve safely landed.

Volume

To prevent possible hearing damage or other hazards, do not listen to your headphones or headsets at high volume

levels for long periods of time.

Battery

Your device contains a lithium–ion battery. If it’s not handled properly, there’s a risk of explosion, fire and burns. What

exactly is improper handling? Puncturing, incinerating, deforming, bending, modifying, attempting to insert foreign

objects into the battery, shorting the contacts, trying to disassemble, or exposing the battery to water or high

temperatures (>60 degrees C/140 degrees F/333.15 degrees Kelvin), among other things that are even more obvious.

You should use your xxx C with the AC adapter provided. A non–compliant AC adapter may hurt you or others (e.g.

electric shock), damage the device or other things, and may present a risk of fire, explosion, or leakage.

Repair

Your device does not contain any parts that you or a friend could service yourselves—repairs should only be made by an

authorized technician. Unauthorized repairs or modifications could result in permanent damage to the device, and may

affect your warranty coverage and the authority to operate your device under applicable regulations.

Regulatory information

USA – FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on the

user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a different circuit than the receiver.

4. Get help from the dealer or an experienced radio/TV tech.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Additionally,

any changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment. Better to stick to approved use.

Canada - Industry Canada

ICES-3(B)-NMB(3)(B)

1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du

dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de

compromettre le fomctionnement du dispositif.

2. Caution:

User should also be advised that:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful

interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with

the e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits

specified for point-to-point and non point-to-point operation as appropriate. High-power radars are allocated as primary

users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference

and/or damage to LE-LAN devices.

2. Attention

udenceLes utilisateurs devraient aussi être avisés que

(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur

afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5470-5725 MHz doit se

conformer à la limite de p.i.r.e.;

(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite

de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. De plus, les utilisateurs de radars de

haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5

650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

European Union, European Economic Area and Switzerland

Declaration of Conformity

SEL hereby declares that the devices comply with the essential requirements and other relevant provisions of the

following EU Directives as applicable: Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC; Ecodesign Directive

2009/125/EC; R&TTE Directive 1999/5/EC; RoHS Directive 2011/65/EU.

Compliance with these directives is assessed using applicable European Harmonised Standards.

The devices may be operated in all member states of the EU, as well as Switzerland, Norway, Iceland, Liechtenstein and

Turkey.

The low band 5.15-5.25 GHz band is for indoor usage only.

The full Declarations of Conformity for xxx C, xxx C Keyboard and xxx C Folio Keyboard can be found at the following web

site: xxx.SEL.com/c-regulatory.

The point of contact for regulatory matters in the EU is SEL Commerce Ltd, [ADD ADDRESS].

xxx C Radio Frequency and Specific Absorption Rate (SAR)

USA

This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is

designed and manufactured not to exceed the FCC's emission limits for exposure to radiofrequency (RF) energy. The

exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.

The xxx C SAR for Body is 0.896 W/Kg.

Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its

highest certified power level in all tested frequency bands.

Canada

IC RF Radiation Exposure Statement:

(i) This Transmitter has been demonstrated co-location compliance requirements as documented in this filing.

(ii) This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment for body-worn

configuration in direct contact to the phantom.

IC RF exposition aux radiations:

(i) Cet émetteur a été démontrée aux exigences de conformité de co-implantation comme documenté dans ce dépôt.

(ii) Cet équipement est conforme aux RF IC limites d'exposition aux radiations dans un environnement non contrôlé pour

la configuration porté sur le corps en contact direct avec le fantôme .

European Union

xxx C complies with the European Union RF exposure limit set forth for an uncontrolled environment and is safe for

intended operation as described in this manual.

Environmental information

The European Union Waste Electrical and Electronic Equipment (WEEE) Directive

The Waste Electrical and Electronic Equipment (WEEE) Directive requires that all Electrical and Electronic Equipment (EEE),

including your device, must be marked with the symbol of the crossed–out wheeled bin. This symbol means that the

equipment must not be disposed of as unsorted municipal waste. Disposing of WEEE together with normal waste may

pose a risk to the environment and to human health, due to certain substances used in EEE.

Under the WEEE Directive, each EU Member State is responsible for achieving a high level of collection of WEEE for

treatment, recovery and environmentally sound disposal. Before tossing your device, think a minute about how to reduce

the amount of WEEE you create. You could, for example, reuse it, recover it, or turn it into artwork. By simply extending

the life of your device, you will have reduced waste and helped the EU achieve its objectives.

The success of this EU policy will depend on your active contribution in returning your WEEE to the appropriate facilities

dedicated to the disposal of such waste. The EU thanks you.

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical

substances regulatory framework. SEL complies with the REACH regulation and your device does not contain any

Substances of Very High Concern (SVHCs) beyond the limits of this regulation. We are committed to providing our

customers with information about the chemical substances in our products as needed to comply with legal requirements.

xxx C ENERGY STAR® Program

Your xxx C is ENERGY STAR® compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR

logo and the following information applies.

xxx C was designed to meet the latest ENERGY STAR guidelines for energy efficiency. Your xxx C ships with the power

management options preset to a configuration that will provide the most stable operating environment and optimum

system performance for both AC power and battery modes.

By default, xxx C turns off its screen after 60 seconds of inactivity to save power. It is recommended that you leave this

and other energy saving features active, so that your xxx C will operate at its maximum energy efficiency. Press the power

button to turn the screen back on.

For more information about ENERGY STAR, visit: http://www.energystar.gov.

Consumer Limited Warranty

USA

This Limited Warranty applies if you are a consumer and you purchased your device in the USA.

Here’s where we tell you what’s covered in your warranty and what’s not – good stuff, and important too. Don’t worry,

we’ll make this as fast and enjoyable as possible.

Use it as any normal human being would.

SEL warrants your xxx C, xxx C Keyboard and xxx C Folio Keyboard (each a “device”) against defects in materials and

workmanship under normal use in accordance with SEL’s published user documentation for one year from the date that

you bought it, in its original packaging, from SEL or its authorized reseller (“Limited Warranty”). Avoid participating in

extreme athletic events while simultaneously using your device.

It matters where you bought it.

This Limited Warranty is only valid and enforceable in locations the device is sold and will apply only if you purchased

your device from SEL or its authorized resellers.

We cover a lot, but here’s what’s not covered.

This Limited Warranty only applies to the hardware components (and not any software elements) of the device and does

not apply to damage caused by normal wear and tear, accidents, misuse (including failure to follow product

documentation), neglect, disassembly, alterations, servicing other than by SEL authorized technicians, and external causes

such as but not limited to water damage, extreme thermal or environmental conditions.

We’re not perfect, but we try very, very hard.

This Limited Warranty does not guarantee that use of the device will be uninterrupted or error-free.

Warranty remedy (what to do if something does go wrong with your device).

If a defect arises and you return your device during the one-year Limited Warranty period, SEL will, at its sole discretion

and to the extent permitted by law, either repair your device using new or refurbished parts, replace your device with a

new or refurbished device functionally at least equivalent to yours, or accept the return of the device in exchange for a

refund of the purchase price you paid for your device. If SEL repairs or replaces your device, the repaired or replaced

device will continue to be warranted for the remaining time of the original warranty period. All returned device and/or

parts for which you have received a replacement will become the property of SEL. Nothing in this Limited Warranty will

reduce or otherwise affect your statutory rights in relation to the device.

To make a claim under this Limited Warranty, please contact xxx.SEL.com/c-support.

We’ll need your name, contact information and the serial number of your device. In certain situations, you might have to

provide a purchase receipt. Please refer to the Privacy Policy for more information on how we handle that data, at

SEL.com/privacy. It is your responsibility to backup all data prior to returning the device under this Limited Warranty.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE LIMITED WARRANTY WRITTEN ABOVE IS THE ONLY

EXPRESS WARRANTY SEL PROVIDES FOR THE DEVICE, AND THE ABOVE REMEDY IS YOUR SOLE REMEDY. SEL EXPRESSLY

DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS OF ANY KIND, WHETHER STATUTORY OR IMPLIED, ARISING FROM

COURSE OF CONDUCT OR OTHERWISE, REGARDING THE DEVICE, EXCEPT THAT ANY IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT ARE LIMITED IN DURATION TO THE

ONE-YEAR PERIOD OF THE EXPRESS WARRANTY ABOVE. SERIOUSLY, WE MEAN IT. THAT’S WHY THIS PART IS IN ALL CAPS.

Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Ok. We’re more than halfway done. You are now officially among the .00001% who make it this far.

YOU EXPRESSLY UNDERSTAND AND AGREE THAT, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, SEL AND

ITS SUBSIDIARIES AND AFFILIATES (COLLECTIVELY, “SEL PARTIES”) SHALL NOT BE LIABLE TO YOU UNDER ANY THEORY OF

LIABILITY (WHETHER CONTRACT, TORT (INCLUDING NEGLIGENCE) OR FAILURE OF ANY WARRANTY OR OTHERWISE) FOR

ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES THAT MAY BE INCURRED BY YOU IN

CONNECTION WITH THE DEVICE OR THESE TERMS, INCLUDING ANY LOSS OF DATA, WHETHER OR NOT A SEL PARTY OR

ITS REPRESENTATIVES HAVE BEEN ADVISED OF OR SHOULD HAVE BEEN AWARE OF THE POSSIBILITY OF ANY SUCH LOSSES

ARISING. YOU EXPRESSLY UNDERSTAND AND AGREE THAT, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THE SEL PARTIES’ TOTAL LIABILITY IN CONNECTION WITH THE DEVICE OR THIS LIMITED WARRANTY WILL NOT EXCEED

THE AMOUNT YOU ACTUALLY PAID SEL FOR THE DEVICE.

Some States do not allow the exclusion of incidental or consequential damages, so the above limitation may not apply to

you.

No employee or representative of SEL or its affiliates or any third party is authorized to make any modification, extension

or addition to this Limited Warranty. If any term of this Limited Warranty is held to be illegal or unenforceable, the

remaining terms of this Limited Warranty will remain in full force and effect.

One...more...sentence...

This Limited Warranty is given by SEL Inc., whose registered address is at 1600 Amphitheatre Parkway, Mountain View, CA,

USA, 94043, and it gives you specific legal rights. You may have other rights, which vary from State to State.

And, that’s it. Thanks for reading; your attention to detail has not gone unnoticed. Now go enjoy your new device.

Canada

This Limited Warranty applies if you are a consumer and you purchased your device in Canada.