B LINK ELECTRONIC BL-MP01 11N 150M WIRELESS Router User Manual BL MP01

B-LINK ELECTRONIC LIMITED 11N 150M WIRELESS Router BL MP01

Users Manual

Wireless Pocket Router BL-MP01Client:Client/BridgeRT:Router/WDSAP:AP/WIFI AmplifierProduct Specifications With global extra small size, it works as a Mini WIFI signal amplifier,functions of AP, wireless LAN card, client all in one; It is the perfect match for Apple IPHONE and IPAD, as well as a good helper for mobile working; it is portable wireless product customized for business persons. Size:85*32*17mmProduct featuresAccessoriesPackage SizeNet weight (kg) Gross weight (kg) Cubic meter(mm)Pcs/box CartonRetail PackagingADD: B-LINK ELECTRONIC FACTORY, GUANLAN TOWN, SHENZHEN, CHINATEL:0086-755-28023440 FAX:0086-755-28029002 Website:www.lefen.comAdapter（Optional）USB CableQuick InstallGuide11n:supports 150Mbps at most11g:supports 54Mbps at most11b:supports 11Mbps at mostIEEE 802.11b、IEEE 802.11g、 IEEE802.11n、IEEE 802.3、 IEEE 802.3U;built-in intelligent Omni-directional antennaRJ45 interface, USB interfaceWireless signal transmission rateAntennaPortsOperating environmentFrequency range 2.4-2.4835GHzTransmitting power 12~15dBmModulation technique DBPSK, DQPSK, CCK, OFDM,16-QAM, 64-QAMReset/WPS buttonButtonPower Adapter DC 5V/500MAProtocol and standardOperating temperature：0℃- 40℃;Storage temperature：-40℃-70℃;Working humidity：10% -90% RH non-condensation;Storage temperature：5% -90% RH non-condensation;HIGH GAIN HIGH GAIN LED2T2RLEDWDSWDS2T2R- Random choice of switching any mode among router, client and AP - Supports WPS that encrypt by press one key, no need to set password.- Plug and play, it's convenient to access wireless and share Internet- Built in a device that can scan wireless hot spots, memorise SSID name and bridge,relay automatically,convenience to use.- Supports users' behavior management , QOS advanced management,MAC address filtering,web page filtering and NAT address switching.- Flexible multiple power way such as AC and USB charging, power adapter is configured randomly with this device(5V/500MA)- High-Integrate and multifunction designs,compact body, easy to carry. In home network, it occupies little space and saves power. All wireless devices can be connected. Wireline device also can be upgraded to wireless device. In hotel network, it can help you to allow multi-user sharing wireless network without cable restraint In office network, you are free from pulling cable as it can bridge to any access point. Outdoor, it acts as the receiver with high performance of wireless hot spot, allows multi-user sharing one ID account freely at the same time. At the place where wireless signal is weak,it can enhance signal strength to extend the transmission distance,Wireless r outer m ode InternetClient modeWireless A P modeTrue plug and play!Network Cable100 505*430*280mmHIGH GAIN HIGH GAIN LED2T2RLEDWDSWDS2T2R7 17 1inWireless router Wireless APClientBridgeWIFI e xchangeWIFI a mplificationRelay
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC ID: X2NBL-MP01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu