B and W Group T7 Wireless Portable Speaker User Manual BT 1 Safetey Warranty Text indd

B&W; Group Ltd. Wireless Portable Speaker BT 1 Safetey Warranty Text indd

Contents

User Manual (Statements).pdf

22 This product is only designed to work at an ambient temperature of up to 45°C. 23 Ensure that the wall socket is near the equipment and easily accessible.24 The product’s power supply must only be used indoors. It has NOT been designed for use outdoors, on boats or recreational vehicles.25 To reduce the risk of re or electric shock, do not expose the product to rain or moisture. 26 This product contains Lithium-Ion batteries, if misused or damaged this can become a hazard and is at risk of explosion.27 Do not handle the product should the battery leak.28 Do not incinerate the product. The internal battery could explode causing injury or death.29 Do not attempt to access or replace the product’s battery, the battery is internal and not user serviceable.30 Refer to the product manual for information on battery care.31 Turn off the product before boarding aircraft.32 Do not position or store the product or accessories on or near a vehicle air bag, should the airbag exploded there is a risk of injury.33 Dispose of this product in accordance with local regulations. This product must not be disposed off with regular household waste.34 Do not allow children to use this product without supervision.FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.Labeling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person’s body).
WarrantyBowers & Wilkins products are designed and manufactured to the highest quality standards. However, if something does go wrong with the product, B&W Group Ltd. and its national distributors warrant free of charge labour (exclusions may apply) and replacement parts in any country served by an ofcial Bowers & Wilkins distributor.This warranty complements any national or regional legal obligations of dealers or national distributors and does not affect your statutory rights as a customer. Some regional legal obligations outside the control of B&W Group Ltd. may reduce the scope or time of the terms outlined below. In particular: • Special warranty terms apply in the Russian Federation. • Specic import regulations apply in Brazil.Please contact the relevant national distributor for details.Terms and ConditionsThis warranty:1 is valid only for products purchased from an authorised Bowers & Wilkins retailer or dealer.2 is valid from the date of purchase for a period of ve years for passive loudspeakers and two years for powered loudspeakers, electronics and headphones, except that exclusions apply in certain countries in line with national law. Please consult the Bowers & Wilkins distributor in your country for detailed information.3 is limited to the repair of the equipment. Neither transportation, nor any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.4 is only valid for the original owner. It is not transferable.5 will not be applicable in cases other than defects in materials and/or workmanship at the time of purchase and will not be applicable: a for deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads. b for damages caused by incorrect installation, connection or packing, c for damages caused by any use other than correct use described in the user manual, negligence, modications, or use of parts that are not made or authorised by B&W Group Ltd., d for damages caused by faulty or unsuitable ancillary equipment, e for damages caused by accidents, lightning, water, re heat, war, public disturbances or any other cause beyond the reasonable control of B&W Group Ltd. and its appointed distributors, f for products whose serial number has been altered, deleted, removed or made illegible, g if repairs or modications have been executed by an unauthorised person.How to claim repairs under warrantyShould you have any concerns regarding the performance of your product, please use the following procedure: 1 You can nd all contact details by clicking on ‘Contact Bowers & Wilkins’ at the bottom of the home page of our web site and selecting the appropriate country. 2 Our representative will discuss your concerns. If it is found necessary to return the product for repair, you may be given a Return Merchandise Authorisation. You should not return the product without this authorisation, if given.To validate your warranty, you will need to produce the original sales invoice or other proof of ownership and date of purchase.Environmental InformationThis product complies with international directives, including but not limited to: i. the Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) ii. the disposal of Waste Electrical and Electronic Equipment (WEEE).Consult your local waste disposal authority for guidance on how properly to recycle or dispose of this product.Australia WarrantySubject to the following terms, Convoy International Pty Limited (‘Convoy’) will repair or replace any part of any eligible Bowers & Wilkins product that is defective within the warranty period indicated in the table below or refund you the cost of the replacement. The benets to a consumer given by this warranty are in addition to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.Eligibility To claim the benet of this warranty you must;1 Be the original purchaser of a genuine Bowers & Wilkins product (this warranty is not transferable)2 Produce proof of your purchase 3 This warranty is limited to defects that arise; a in the course of normal domestic installation and use and b within the warranty period identied for the product in the table below, commencing on the date of original purchase.4 This warranty excludes: a defects arising from misuse, accident, neglect or improper care, uctuation in electrical current, incorrect or failed software upgrade, damage or malfunction from incorrect assembly or installation, defects from alteration or modication, unauthorised service or repair; b appearance items such as cabinetry marks or damage; c products on which the serial number has been defaced or removed; and d claims made later than 21 days after the defect rst appears.5 Note: In making a claim under this warranty, you agree that If, following receipt of your claim under this warranty, Convoy or its authorised service centre determine that your claim in respect of a product is invalid or you have provided false, inaccurate or misleading information with your claim, Convoy or its authorised service centre may charge you for any labour, parts or transport costs incurred.How to ClaimIn order to make a claim under this warranty, take the following steps:1 Attach you proof of purchase document(s) to the below card and complete the details.2 Contact Convoy by telephone or email (contact details below)3 Deliver the product(s) the subject of your claim to the Authorised Service Centre nominated by Convoy. Details of the Authorised Services Centres are available at www.ehi.com.au4 You must bear any expense you incur in claiming this warranty. Notice: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Brand Category Warranty PeriodBowers & WilkinsActive Loudspeakers 2 YearsAccessories 1 YearConvoy International Pty Ltd., Unit 7, 1801 Botany Rd, Banksmeadow, NSW 2019, Australia Tel: +61 29700 0111 www.ehi.com.au service@convoy.com.au
Make: Model Name/Number:Serial Number:Date of Purchase:Where Purchased:

Navigation menu