BARCO AMM260WTDS 26" LCD Color Display User Manual SV4 frontcover

Download:
Mirror Download [FCC.gov]
Document ID	938185
Application ID	l31mNVE2f6bsCQOJMBzreg==
Document Description	User Manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	273.15kB (3414335 bits)
Date Submitted	2008-05-07 00:00:00
Date Available	2008-05-07 00:00:00
Creation Date	2008-05-07 22:07:43
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-05-07 22:07:55
Document Title	SV4 frontcover.fm
Document Creator	FrameMaker 7.1
Document Author:	ericlau

ADVAN
VISION ELECT HDTV
26” High-Definition
LCD Monitor
REF 240-030-960
User Guide
2007/11
1000-401-075 A
100mm
mm
3mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
100mm
Table of Contents
English
Warnings and Cautions ........................................................................ 2
Warnings ........................................................................................... 2
Cautions ............................................................................................ 3
Symbol Definitions ................................................................................ 5
Product Description and Intended Use ............................................... 6
Product Contents .............................................................................. 6
System Interconnection .................................................................... 8
Power Connection ............................................................................. 8
Operating the Monitor ........................................................................... 9
Front Panel Controls ......................................................................... 9
Rear Panel ...................................................................................... 10
Input Port Layout ............................................................................. 10
Fiber Optic Module (optional) Installation/Activation ...................... 11
Input Selection List .......................................................................... 11
Standard On-Screen Display (OSD) Operation .............................. 12
Stryker Camera Preset Modes ........................................................ 12
OSD Function Description .............................................................. 13
Cleaning the Monitor ........................................................................... 14
Troubleshooting .................................................................................. 15
Technical Specifications ..................................................................... 16
Classification and Approvals ........................................................... 17
Electromagnetic Compatibility ........................................................... 18
Warranty ............................................................................................... 23
Service and Claims .............................................................................. 23
Declaration of Conformity .................................................................. 24
Warnings and Cautions
Please read this manual and follow its instructions carefully. The words
warning, caution, and note carry special meanings and should be
carefully reviewed:
Warning
The personal safety of the patient or physician may be
involved. Disregarding this information could result in
injury to the patient or physician.
Warning
A lightning bolt within a triangle is intended to warn of
the presence of hazardous voltage. Refer all service to
authorized personnel.
Caution
Special service procedures or precautions must be
followed to avoid damaging the instrument.
Note
Special information to make maintenance easier or
important information more clear.
Warnings
Warning
To avoid potential serious injury to the user and the
patient, and/or damage to this device, the user must:
1. Restrict this device to use by, or on the order of, a physician,
because of Federal law (United States of America).
2. Read the operating manual thoroughly and be familiar with its
contents prior to using this equipment.
3. Carefully unpack the unit and check if any damage occurred
during shipment.
4. Test this equipment prior to a surgical procedure. This monitor
was fully tested at the factory before shipment.
5. Do not place the monitor or any other heavy object on the power
cord. Damage to the cable can cause fire or electric shock.
6. Should any solid object or liquid fall into the panel, unplug the unit
and have it checked by qualified personnel before operating it
any further.
7. Unplug the unit if it is not to be used for an extended period of
time. To disconnect the cord, unscrew plug first, then pull it out by
the plug. Never pull the cord itself.
8. To avoid electric shock, avoid removing control unit covers.
English
9. Do not attempt internal repairs or adjustments not specifically
detailed in this operating manual.
10. Pay close attention to the care and cleaning instructions in this
manual. A deviation may cause damage (refer to the Cleaning
section).
11. Do not sterilize the monitor.
12. Use appropriate caution to prevent contact with fluids, if the unit is
being used with a power supply in patient environments.
Cautions
1. The AC Adapter must be plugged into a grounded power outlet.
2. Use only the proprietary VISION ELECT HDTV(model 240-030960) power supply (P/N 240-030-950, Manufacturer: JEC Korea,
Model No: JMW1150KA2400F07) for the VISION ELECT HDTV
(model 240-030-960) monitor. Completely secures the
connection between the DC power cord and the extension cord.
3. Grounding reliability can only be achieved when the equipment is
connected to an equipment receptacle labeled “Hospital Only” or
“Hospital Grade.”
4. To connect to an international power supply, use an attachment
plug appropriate for the power outlet.
5. Turn power off when unit is not in use.
6. Remove the power module and connection when transporting the
unit.
7. Save the original carton and associated packing material. They
will be useful should you have to transport or ship the unit.
8. Handle the monitor with care. Do not strike or scratch the screen.
9. Never operate the unit right after having been transported from a
cold location directly to a warm location.
10. Do not expose the monitor to moisture or directly apply liquid
cleaners directly to the screen. Spray the cleaning solution into a
soft cloth and clean gently.
11. Allow adequate air circulation to prevent internal heat buildup.
12. Do not place the unit on surfaces (rugs, blankets, etc.) or near
materials (curtains, draperies) that may block the ventilation slots.
The monitor is cooled by natural convection and has no fan.
13. Do not install the unit near sunlight, excessive dust, mechanical
vibration or shock.
14. The unit is designed for operation in a horizontal position. Do not
operate the unit in a vertical position.
15. Keep the unit away from equipment that uses strong magnets
(i.e., large loudspeakers).
16. Do not touch the patient with signal input or output connectors.
Equipment with SIP/SOP connectors should either comply with
IEC 60601-1 and/or IEC 60601-1-1 harmonized national
standards or the combination should be evaluated.
17. CAUTION: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
This equipment has been tested and found to comply with
the limit for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. There is no
guarantee that interference will not occur in a particular
installation, which can be determined by turning the
equipment off and on. The user is encouraged to try to
correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving device.
Increase the separation distance between the
equipment.
Connect the equipment to an outlet on a circuit
different from that to which the other device(s)
are connected.
Consult the manufacturer or field service
technician for help.
18. To ensure electromagnetic compatibility, refer to the
“Electromagnetic Compatibility” section of this manual. The
VISION ELECT HDTV (model 240-030-960) monitor must be
installed and operated according to the EMC information
provided in this manual.
The VISION ELECT HDTV (model 240-030-960) monitor has been tested
under the UL 60601-1 standard and is UL listed for medical application.
The warranty is void if any of these warnings or cautions are
disregarded.
Symbol Definitions
English
The following symbols appear on the product, its labeling, or the product
packaging. Each symbol carries a special definition, as defined below
Dangerous: High Voltage
Consult accompanying documents.
Direct Current
Indicates protective earth ground.
For indoor use only.
DC power control switch
SN
Serial Number
Top - Bottom
Fragile
Do not get wet
Maximum Stacking
Manufacturer
European Authorized Representative
Indicates proof of conformity to applicable European Economic Community
Council directives and to harmonized standards published in the official journal
of the European Communities.
51LJ
Medical Equipment
E215822
Medical Equipment is in accordance with UL 60601-1 and CAN/CSA C22.2 No.
601.1 in regards to electric shock, fire hazards, and mechanical hazards.
Tested to comply with FCC Class B standards.
IPX1
Degrees of protection against the ingress of water.
This symbol indicates that the waste of electrical and electronic equipment
must not be disposed as unsorted municipal waste and must be collected
separately. Please contact the manufacturer or other authorized disposal
company to decommission your equipment.
•
DC power on at locker switch.
Product Description and
Intended Use
The VISION ELECT HDTV (model 240-030-960) High Definition LCD
Monitor is an intelligent, microprocessor-based TFT-LCD monitor
intended for use in endoscopic surgical applications. It has an
ergonomically designed display and is compatible with most analog
RGB (Red, Green, Blue) display standards.
The VISION ELECT HDTV (model 240-030-960) monitor has the
following features:
• Advanced Viewing Solution (AVS): A sophisticated filter
extends the viewing angle of the screen image, without
sacrificing contrast ratio and brightness.
• Upgraded video cards or software will not require buying a new
monitor because of the wide auto-scanning compatibility range.
• The internal microprocessor digitally controls auto-scanning, for
horizontal scan frequencies between 31.47 KHz and 78.88 KHz,
and vertical scan frequencies between 50.0 Hz and 85.1 Hz. In
each frequency mode, the microprocessor-based circuitry allows
the monitor to function at the precision of a fixed frequency.
• The resident memory allows for storing factory default settings
and also additional user adjustment parameters.
• The maximum resolution achievable is WUXGA (1920 × 1200,
60Hz).
• The monitor is compliant with the VESA-DPMS powermanagement standard. In order to save energy, the monitor
must be connected to a system compliant with the standard.
• The monitor is designed to mount an accessory (such as a
camera or speaker) with a 2 lbs (max) load per hole.
• The monitor is certified by UL International in accordance with
medical standard UL 60601-1. It is also CE marked for sale in
the European Community for integration or use with medical
products.
Product Contents
1. Carefully unpack the VISION ELECT HDTV (model 240-030-960)
monitor. Save the original carton and associated packing
material. They will be useful should you have to transport or ship
the unit.
2. Check the monitor and its accessories for any damage that may
have occurred during shipping. Immediately report any damage English
to the shipping company.
3. Check the contents of the accessories package with the following
list to make sure all components have been included. In addition
to this manual, you should find:
Included Accessories
(a) 1 DVI cable
(b) 1 VGA HDDB15 cable
(c) 1 AC adapter (Stryker P/N 240-030-950,
Manufacturer: JEC, Model No: JMW1150KA2400F07)
(d) 1 Hospital-grade AC power cord
(e) 4 M4 x 10mm VESA screws
(f) 1 BNC cable
(g) 1 S-Video cable
(h) 2 Cable Managerment Clamps
(a)
(d)
(b)
(h)
(c)
(e)
(f)
(g)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Creator                         : Adobe Illustrator(R) 9.0
For                             : Andy,
Title                           : C:\Documents and Settings\Andy Jang\���� ȭ��\Vision Elect HDTV Extension Cable �߰�����ڷ�\�޴��� �����۾�\SV4_Rev12 (cover).pdf
Create Date                     : 12/10/2007 3:24 PM
Bounding Box                    : 34 18 362 549
Creator Version                 : 9
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:84f18ed7-2e37-45d4-820d-c51aa4bce5d5
Modify Date                     : 2008:05:07 22:07:55-05:00
Metadata Date                   : 2008:05:07 22:07:55-05:00
Document ID                     : uuid:32369877-0010-42c4-9ebf-f0de5d6c05ce
Format                          : application/pdf
Tagged PDF                      : Yes
Author                          : ericlau
Producer                        : Acrobat Distiller 7.0 (Windows)
Image Height                    : 531
Image Width                     : 328
Image Size                      : 328x531
Megapixels                      : 0.174

EXIF Metadata provided by EXIF.tools