BBPOS SIMPLYPRINT Simple Print User Manual

BBPOS Limited Simple Print

User manual

SimplyPrintTMSTEP 1:Use the provided USB cable to fully charge theSimplyPrint before first use (fig. 1).STEP 2:A. Insert the paper rollin the compartment (fig. 2).B. Ensure to closethe cover tightly andproperly. Otherwise, theerror red light will beFLASHING after the deviceis powered on (fig. 3). IndexMobile bluetooth printer Quick Start GuideLED Indicators IMPORTANT: Please fully charge the printer before first use. Please recharge the printer again when the printer is not in use for a long period of time, since battery will slowly discharge. We recommend user to turn off the printer when it is not in use. If the printer is operated at low temperature, the battery performance will temporarily decline. Please remember to fully and frequently charge the printer. ThermalPrinter HeadPaper Feeding Button Bluetooth Pairing Button Power ON/ OFF Button Printer CoverMetal Belt ClipScrew of Belt Clip Micro USB portDevice – SimplyPrint Bluetooth Printer x 1Thermal Paper Roll (Diameter: 30 mm maximum) x 1Metal Belt Clip x 1 and Screw x 1 USB Cable x 1 DC Adaptor x 1Power ON - green light ON Battery Status • Lo-Battery - red light FLASHING• Charging - red light ON• Fully Charged - green light ONBluetooth Status• Pairing - blue light FLASHING • Paired - blue light ON• Error: (cover opened/ no paper)- red light FLASHINGPackage includedi.ii.iii.iv.v.LED Indicators:•••Afig. 1fig. 2Bfig. 3Support Operating System:
Specifications ImportantSpecifications & ImportantQuick Start GuideSTEP 3:A. Press & hold button once, thenthe green LED will turn on (fig. 4). B. Press & hold button for paper feeding. STEP 4:A. Connecting device using Bluetooth 2.1 - press & hold button until blue light flashes tostart the pairing mode (fig. 5). B. Connecting iOS devices using BLE - the printer will automatically start the searching proces after printer is powered on. Connect the printer from the scanned device list of yoursmartphone/ tablet, then, the blue light will be ONcontinuously and is ready for use.When the device is low powered, the red light will beflashing. Please connect the USB power to rechargethe printer and the red light will be ON whencharging. After the printer is fully-charged, the green light will be ON (fig. 6). ButtonsCommunication InterfaceThermal Printer- Printing method- Printable dots per line- Resolution - Dot pitch - Print Speed - Paper Specificaitons- Effective Printing Width - Paper Roll Diameter- Sensor LED indicatorPower & Battery Charging Power on/off button, bluetooth pairing button& paper feeding button Bluetooth 4.0 /BLEThermal dot line printing384 dots Width 8 dots/mm x Height 16 dots/ mm (WxH)Horizontal: 0.125 mm, Vertical: 0.125 mm50 mm/ secWidth: 58 mm/ 2 inch, Material: 58g thermal paper, Paper lengtj: 7 (+/- 0.2m) 48 mmMaximum 30 mm Paper end & Cover open sensor, low battery sensor 4 LEDs: Power On, Charging/ Low Battery status,Bluetooth status, ErrorLithium-ion rechargeable battery 2200 mAh, 3.7V Via micro USB, 3.5 hours to be fully chargedOperating Temperature Operating Humidity Storage TemperatureStorage Humidity Software Support Certifications DimensionsWeight 0°C – 45°C (32°F – 113°F)Maximum 95% -20°C – 45°C (-4°F – 113°F)Maximum 95% Android 2.1 or above, iOS 4.3 or above,Windows Phone 8, Windows 8 CE, FCC, RoHS 79.2 x 104.8 x 51.8 mm (approx.) 3.12 x 4.13 x 2.04 inches (approx.)Main unit - 226 g (approx.),Thermal paper - 28 g (approx.) Don’t drop or use any hard object to hit the product. Don’t open the cover when the product is in printing mode. Before you open the cover, please ensure the product stop printing. Turn off the printer if you are not using the product. Don’t pull out the paper when the cover is closed. Please ensure that the paper roll is placed properly before the cover is closed. Don’t use metal objects, sandpaper or sharp tools to touch the heating element and driver IC. Don’t touch the thermal head heating element, which may affect printing quality. CAUTIONS:1.2.Don’t open or disassemble the product, which will void product warranty and may damage the product. Don’t operate the product when there is moisture (caused by condensation) on the front surface of thermal head. Don’t feed wrong sized thermal paper or paper containing (Na+,K+, Cl-). It may affect printing quality and life of the thermal head. Please use the thermal paper which complies with specific requirements/ specifications. Place the product or thermal paper in a cool, dry and dark location. Don’t let plastic film, eraser or adhesive tape be in contact with the thermal paper for a long period of time. Don’t use chemical glue on the thermal paper. It is not recommended to use the thermal paper stored for a long period of time.The printer has built-in lithium-ion battery. Since the requirements of disposal of batteries vary from country to country, please refer to the appropriate disposal method of your country. This device contains small parts (screw of the metal belt clip). Please keep the device out of children's reach. If the small part is swallowed, please consult your physician immediately.Don't immerse the device into water. This device is not water-proof or weather-proof. Don't put it close to the sink or dish washer. Don't clean it with water or corrosive solvent. Clean the device by using dry cloth only. Don't drop, tear or disassemble the device improperly, any misuse or improper use which will void the product warranty. Contact your dealer when your device malfunctions. 3.4.5.6.7.8.9.©IOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. All details are subject to change without prior notice.fig. 4fig. 5fig. 6
FCC Requirement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu