BBPOS WISEPOS WisePOS User Manual WisePOS QSG Eng 20161117

BBPOS International Limited WisePOS WisePOS QSG Eng 20161117

User manual

WisePOS®www.bbpos.comEMV card reader Fig.1- Front ViewBarcode scan button **applicable to the model with barcode scanner only** 4 inches LCD displayMicro USB portEarphone jackSecure PIN padVolume +/-Power button Barcode scanner**applicable to the model with barcode scanner only**MicNFC card readerEarpieceLED indicatorQuick Start Guide IndexDownloadAPPStep 1:Download the ocial APP from APP Store.IMPORTANT: Push & slide to open the back cover of WisePOS™ to insert the rechargeable battery into the battery compartment, SD card, SIM cards and SAM cards to card slots properly, then lock the cover again for battery charging via USB cable before use.SD cardSIM card 1SIM card 2SAM cardBattery1 2 3 4Fig. 2 - Back ViewSpeakerMagstripecard reader5MP camera & ashCharging contactsFig. 3 - Internal ViewBattery coverSIM card slot x 2SAM card slot x 2 Battery compartmentSD card slotBattery connectorMagnetic headCAUTION: Please don’t point or damage the internal components when the back housing is opened. Any intentional damages may void the warranty and cause device malfunction. Input Amount$XX.00Step 2:Please follow the instructions of app to login and input amount to start the transaction process.Step 3:Please follow the instructions to swipe, insert or tap your payment card.Account Login Device X1USB cable X1Rechargeable battery X1Quick start guide X1Package Contents1100 2200 XXXX 5522MemberSince00ValidFrom00/00ValidThru00/00Cardholder NameCREDIT CARD1100 2200 XXXX 5522MemberSince00ValidFrom00/00ValidThru00/00Cardholder NameCREDIT CARDAndroid basedmPOS device
Scan Barcode©2016 BBPOS Limited. All rights reserved. BBPOS and WisePOS™ are either trademark or registered trademarks of BBPOS Limited. iOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. Windows® is registered trademark of Microsoft Corporation in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by BBPOS Limited is under license. Other trademarks and trade names are those of their respective owners. All details are subject to change without prior notice. Room 1602, 16/F, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, Hong Kongwww.bbpos.comNeed Help?E: sales@bbpos.com | T: +852 3158 2585How to use barcode scanner (if applicable) Specic Absorption Rate (SAR) information:This WisePOS™ meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: WisePOS (FCC ID: 2AB7X-WISEPOS) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 10mm for body worn and 10mm for hotspot. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm for body worn and 10mm for hotspot. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.Body-worn OperationThis device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm for body worn and 10mm for hotspot must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.FCC Caution Statements:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Problems Recommendations• Please check if your card supports NFC payment.• Please ensure that if your card is placed within 4 cm range on top of the NFC marking.• Please take out your NFC payment card from wallet or purse for payment to avoid any interference.• Please check if the rechargeable battery, SIM cards and SAM cards are properly inserted.• Please check if the device is fully charged.• Please restart the device for retry.Device cannot read your card successfully through NFCDevice has no responseTroubleshootingProblems Recommendations• Please check if the device has power when operating and ensure devices are connected.• Please check if the application instructs to swipe or insert card.• Please ensure there is no obstacle in the card slots.• Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card. • Please swipe or insert card with a more constant speed.Device cannot read yourcard successfullyBattery • Detachable 3000mAH 3.7v Li-ion battery • Charging: 5V 800mA via micro USB or charging cradle contacts • Charging time: < 5 hoursPhysical Characteristics • Operating Temperature & Humidity: 0˚C - 45˚C / 32˚F - 113˚F, RH 95% max. • Storage Temperature & Humidity: -20˚C - 55˚C / 14˚F - 131˚F, RH 95% max. • Chip Card Reader Lifetime: 100k cycles • Magnetic Card Reader Lifetime: 100k cycles • Dimensions: 70.5 x 155 x 17.8 mm / 2.78 x 6.1 x 0.7 inch (approx.) • Weight: 240g / 8.1oz (approx.)Certications* • PCI PTS POI v4.1 with SRED • EMV L1 & L2 • PBOC 3.0 L1 & L2 • EMV Contactless L1 • VISA PayWave • MasterCard PayPass • AMEX Expresspay • Discover Network ZIP, Contactless D-PAS • QPBOC 3.0 L1 & L2 • MasterCard TQM • VISA Ready • MasterCard Mobile POS • FCC, CEProduct SpecicationsFeatures & Functions • Android 4.4.2 • EMV Contactless/NFC card reader • EMV/PBOC Chip card reader • Triple track magnetic stripe card reader • Secure PIN pad • High speed 1D barcode scanner (optional) • 3G/WiFi/BT connectivity • Application download via MoneyStore • Over-the-air rmware upgrade • Over-the-air cryptographic-key loadingUser Interface • 4” full color TFT display • 4 LEDs for EMV contactless reader, 1 LED for power indicator • Cap Sense Touch Panel • Physical function buttons: “POWER”, “VOL +”, “VOL –“ • Large barcode scanning button (barcode scanning optional) • Audio receiver, microphone and ringerCard Reader Interface • NFC Card Reader: EMV Contactless / ISO14443A/B • Chip Card Reader: EMV / PBOC / ISO7816 (Reads Type A/B/C cards) • Magnetic Stripe Card Reader: 3 Tracks ISO7811PIN Pad Interface • Physical buttons • “0”-“9”, “Enter”, “Cancel”Cryptographic • PIN & Data encryptionFunctions • Key management schemes: DUKPT, MK/SK • Encryption Algorithm: TDES • Remote working keys distribution via asymmetric schemeConnectivity • 3G data: WCDMA 850/2100MHz • 2G data: GPRS EDGE Class 12 850/900/1800/1900MHz • 2G voice: GSM 850/900/1800/1900MHz • WiFi: 802.11 b/g/n • Bluetooth®: BT 4.0 (Classic 3.0 HS/2.1 EDR mode and BLE mode) • Micro-USB • 3.5mm hands-free socketSensors and Expansion • 5MP auto focus camera with LED ashInterfaces • GPS • 1D barcode scanner (optional) • 2 Micro SIM slots • 2 Mini SAM slots • micro SD card slotPress the barcode scan button of the WisePOS® Click the scan barcode button in the app ORThis section is only applicable to the model with barcode scanner.Please follow the instructions of app to press the barcode scan button or click the scan barcode button in the app, and then project the red laser light on the barcode on the product. Cautions & Important Notes• Ensure to download the ocial APP from APP Store. • Please fully charge your WisePOS™ before use. • Please ensure magstripe /EMV chip of the card is facing the right direction when swiping or inserting card.• Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign object into the device. Doing any of which will void the Warranty.• Don’t immerse the device into water and place near washbasins or any wet locations. Don’t spill any food or liquid on the device. Don’t attempt to dry the device with external heat sources, such as microwave or hair dryer. • Don’t use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean the surface only. • Don’t use any sharp tools to point the internal components or connectors, doing which may lead to malfunction and void the Warranty.• Don’t try to disassemble the device to repair. Please contact your dealer for repair and maintenance.Revise v.3 / 20161117

Navigation menu