BEA orporated 10TD900PTRI Transmitter operating in the ISM band (902-928 MHz), compatible with BEA 10RD900 Receiver, implementing frequency hopping, intended to be used as wireless door activation pushplates in the pedestrian automatic door industry User Manual 75 5172 06 PANTHER SERIES 20160517 indd
BEA Incorporated Transmitter operating in the ISM band (902-928 MHz), compatible with BEA 10RD900 Receiver, implementing frequency hopping, intended to be used as wireless door activation pushplates in the pedestrian automatic door industry 75 5172 06 PANTHER SERIES 20160517 indd
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3107024 |
| Application ID | mX+TIKPIW7RhexArJgxbeQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 106.54kB (1331747 bits) |
| Date Submitted | 2016-08-12 00:00:00 |
| Date Available | 2016-08-26 00:00:00 |
| Creation Date | 2016-08-04 11:41:51 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-08-12 14:40:53 |
| Document Title | 75.5172.06 PANTHER SERIES 20160517.indd |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
ENGLISH PANTHER SERIES Push plate with integrated 900 MHz wireless transmitter (US version) DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. Hex Key Housing Assembly Faceplate Locking Tab Mounting Bracket Battery Enclosure Mounting Keys Mounting Holes 6 INCH ROUND, 900 MHz: 10EMR61-900 - logo & text 10EMR6-900 - text only 10EMR6L-900 - logo only 75.5172.06 PANTHER SERIES 20160517 4.75 INCH ROUND, 900 MHz: 10EMR4751-900 - logo & text 10EMR475-900 - text only 10EMR475L-900 - logo only 4.75 INCH SQUARE, 900 MHz: 10EMS4751-900 - logo & text 10EMS475-900 - text only 10EMS475L-900 - logo only Page 1 of 4 The device should not be used for purposes other than its intended use. All other uses cannot be guaranteed by the manufacturer of the sensor. The installer of the door system is responsible for carrying out a risk assessment and installing the sensor and the door system in compliance with applicable national and international regulations and standards on door safety. The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor. • • • INSTALLATION Install Mounting Bracket using at least two (2) #8 countersunk head screws. Any mounting holes may be used. Observe “THIS END UP”. Align Housing Assembly onto Mounting Keys and slide down until Locking Tab engages. To remove, press Locking Tab and slide up. NOTES: 1. For added security, additional screws may be installed through Housing Assembly and Mounting Bracket during Step 2. 2. Ensure spring clips “click” during Faceplate installation. It may be necessary to rotate Faceplate for proper alignment. Insert Faceplate into Housing Assembly and use Hex Key to engage spring clips on the top and bottom of Housing Assembly. To remove, use Hex Key to disengage spring clips. Page 2 of 4 75.5172.06 PANTHER SERIES 20160517 SETUP To program the 900 MHz wireless receiver (sold separately), please refer to the appropriate User’s Guide: • 900 MHz - 75.5786 900 MHz Panther series must use a 900 MHz receiver. BATTERY REPLACEMENT Remove four (4) screws on Battery Enclosure. • 900 MHz versions - two (2) CR2032 DO NOT OVER TIGHTEN SCREWS DURING REASSEMBLY. THIS MAY CAUSE CONSTANT TRANSMITTER ACTIVATION. TROUBLESHOOTING No activation Constant activation 75.5172.06 PANTHER SERIES 20160517 Receiver not programmed Setup transmitter Receiver improperly wired Verify power and activation connection Dead battery Replace battery Battery Housing screws too tight Loosen Battery Housing screws Activation connected to NC of door control Connect to NO Receiver set to Toggle Mode Set receiver to Pulse Mode Page 3 of 4 PLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOR PRINTING TECHNICAL SPECIFICATIONS Dimensions 6” ROUND - 6.33” diameter, 1.45” depth 4.75” ROUND - 5.12” diameter, 1.42” depth 4.75” SQUARE - 5.12” height, 5.12” width, 1.42” depth Weight 6” ROUND - 1.2 lbs 4.75” ROUND - 1.14 lbs 4.75” SQUARE - 1.04 lbs Material FACEPLATE - stainless steel HOUSING - ABS plastic Transmitter Frequency 900 MHz Power 900 MHz versions - two (2) CR2032 Mounting Surface mount only Certification FCC, IC Temperature 14 °F - 131 °F (-10 °C - 55 °C) Enclosure Rating NEMA 4 Specifications are subject to change without prior notice. All values measured in specific conditions. FCC / IC ©BEA|OriginalInstructions|75.5172.06PANTHERSERIES20160517 “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” Changes or modifications not expressly approved by BEA Incorporated could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. FCC ID: 2ABWS-10TD900PTRI IC: 4680-10TD900PTRI MODEL: 10EMR61-900 MODEL: 10EMR4751-900 MODEL: 10EMS4751-900 MODEL: 10EMR6-900 MODEL: 10EMR475-900 MODEL: 10EMS475-900 MODEL: 10EMR6L-900 MODEL: 10EMR475L-900 MODEL: 10EMS475L-900 ANSI / AAADM Compliance Upon completion of the installation or service work, at a minimum, perform a daily safety check in accordance with the minimum inspection guidelines provided by AAADM. Provide each equipment owner with an owner’s manual that includes a daily safety checklist and contains, at a minimum, the information recommended by AAADM. Offer an information session with the equipment owner explaining how to perform daily inspections and point out the location of power/operation switches to disable the equipment if a compliance issue is noted. The equipment should be inspected annually in accordance with the minimum inspection guidelines. A safety check that includes, at a minimum, the items listed on the safety information label must be performed during each service call. If you are not an AAADM certified inspector, BEA strongly recommends you have an AAADM certified inspector perform an AAADM inspection and place a valid inspection sticker below the safety information label prior to putting the equipment into operation. Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: Tech_Services@beainc.com | Tech Docs: www.beasensors.com Page 4 of 4 75.5172.06 PANTHER SERIES 20160517
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:08:04 11:41:51-04:00 Creator : Adobe InDesign CC 2015 (Macintosh) Modify Date : 2016:08:12 14:40:53-07:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Metadata Date : 2016:08:12 14:40:53-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:9a637cd5-32c6-42e0-9104-82de0ebabef4 Original Document ID : xmp.did:3DC0279A5095E211B5A3E4D6F5E241D6 Document ID : xmp.id:39c83049-3a8b-4ac6-b365-7a81877554f5 Rendition Class : proof:pdf Version ID : 1 History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:04 11:41:52-04:00 Derived From Instance ID : xmp.iid:fdeabb61-ecb6-43c4-9793-d177dc26749b Derived From Document ID : xmp.did:3DC0279A5095E211B5A3E4D6F5E241D6 Derived From Original Document ID: xmp.did:3DC0279A5095E211B5A3E4D6F5E241D6 Derived From Rendition Class : default Format : application/pdf Title : 75.5172.06 PANTHER SERIES 20160517.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 4EXIF Metadata provided by EXIF.tools