BEA 75.0151.05 Remote Control 20060903 Reference Guide Universal
User Manual: BEA Reference Guide - BEA Universal Remote Reference Guide
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
BEA INC. UNIVERSAL REMOTE CONTROL REFERENCE GUIDE FUNCTION ? EAGLE BODYGUARD NOT USED LOCK LOCK UNLOCK UNLOCK NOT USED INQUIRY INQUIRY INQUIRY SENSITIVITY (0 – 9 max) Default = 8 SENSITIVITY (0 – 9 max) Default = 8 closed, 8 open SENSITIVITY (0 – 9 max) Default = 8 closed, 7 open HOLD TIME (0-9) (0.5 sec – 9 sec) Default = 0 (.5 sec) RELAY OUTPUT (1-4) HOLD TIME (0-9) (1 - 10 sec) Default = 0 (1 sec) RELAY OUTPUT (1-4) HOLD TIME (0-9) (1 sec – 10 sec) Default = 0 (1 sec) RELAY OUTPUT (1-4) 1. 2. 3. 4. 1. 2. 3. 4. 1. 2. 3. 4. Active output* Passive output** ON OFF Default = 1 (Active) Using The Remote Control Active output* Passive output** ON OFF Default = 1 (Active) DETECTION MODE (1-3) 1 2 3 Bidirectional Unidirectional Unidirectional with MTF Default = 3 (Uni-Directional With MTF) IMMUNITY (1-3) 1. Extreme sensitivity 2. Normal sensitivity 3. Decreased sensitivity NOT USED RESTORE DEFAULT SETTINGS (1) 0 1 2 3 4 30 sec 1 min 2 min 3 min 5 min 5 6 7 8 9 AUTO LEARN TIME (0-9) 7 min 10 min 15 min 20 min 25 min PATTERN WIDTH (1-9) 1 Passive output** Active output* ON OFF Default = (Active) AUTO LEARN TIME (0-9) NOT USED 75.0151 V5 July 2003 DK-12 0 1 2 3 4 30 sec 1 min 2 min 3 min 5 min 5 6 7 8 9 7 min 10 min 15 min 20 min 25 min PATTERN WIDTH (1-6) Wide (Default – door closed) 1 2 Middle (Default – door open) 3 Asymmetrical Left Narrow 4 Asymmetrical Right Narrow 5 Narrow Left 6 Narrow Right 7 Asymmetrical Left Wide 8 Asymmetrical Right Wide 9 Center Narrow Default = 1 (Wide/Middle) PATTERN DEPTH (1-3) 1. Deep pattern 2. Medium pattern 3. Limited pattern Default = 1 door closed, 1 door open FREQUENCY (1-2) 1. Normal frequency 2. Random frequency 1 3. Random frequency 2 SET-UP (1-3) – See manual 1. Door closed 2. Door open 3. Restore factory defaults 2 3 4 5 6 Wide (Default – door open & closed) Left Wide Right Wide Left Narrow Center Narrow Right Narrow Default = 1 (Wide) NOT USED FREQUENCY (1-2) 1. High impulse 2. Low impulse SET-UP (1-3) – See manual 1. Door closed 2. Door open 3. Restore factory defaults *Passive output (Fail-Safe): NO-COM circuit is closed and NC-COM circuit is open ** Active output (Fail-Secure): NC-COM circuit is closed and NO-COM circuit is open. 1. Every programming session with the remote control MUST begin by unlocking the sensor (except for DK-12). Press the UNLOCK key once, and the sensor will unlock, unless there has been a passcode previously stored. If so, press UNLOCK once, then enter the code. If code is unknown, power the sensor OFF, then power back ON. Press UNLOCK with 60 seconds, then re-lock with the new code when programming is complete. The default code is 0000 and is not required to be entered. 2. To INQUIRE a setting, simply UNLOCK the sensor, then press the desired function key, followed by the “?” key. Observe the LED on the sensor and count the number of flashes to determine current setting. 3. When programming is complete, press the LOCK key twice. If a passcode is desired, press the LOCK key once, followed by a 4digit code. 4. If there are several sensors in close proximity to one another, be sure to exercise caution when programming, as to not unlock more than one sensor at a time. BEA INC. UNIVERSAL REMOTE CONTROL REFERENCE GUIDE Defaults shown in bold print if not not stated. FUNCTION ? IS-87/ IS-87XL FALCON WIZARD LOCK LOCK LOCK UNLOCK UNLOCK UNLOCK INQUIRY INQUIRY INQUIRY SENSITIVITY (0 min – 9 max) Default = 7 SENSITIVITY (0 min – 9 max) Default = 7 SENSITIVITY (0 min – 9 max) Default = 7 HOLD TIME (0-9) (0.5 sec – 9 sec) Default = 0 (0.5sec) RELAY OUTPUT (1-4) HOLD TIME (0-9) (0.5 sec – 9 sec) Default = 0 (0.5sec) RELAY OUTPUT (1-4) HOLD TIME (0-9) (0.5 sec – 9 sec) Default = 0 (0.5sec) RELAY OUTPUT (1-4) 1. 2. 3. 4. Active output* Passive output** ON OFF 1. 2. 3. 4. Active Output* Passive Output** ON OFF Default = 1 (Active) Default = 1 (Active) NOT USED NOT USED DETECTION MODE (1-3) 1. 2. 3. Bidirectional Unidirectional approach Unidirectional depart Default = 2 (Unidirectional Approach) DETECTION MODE (1-3) 1. 2. 3. Bidirectional Unidirectional approach Unidirectional depart 1. 2. 3. Active Relay / Passive Transistor Passive Relay / Active Transistor Passive Relay / Passive Transistor 4. Active Relay / Active Transistor 5. All Relay Output – Active 6. All Relay Output – Passive (5 & 6 on SN 52000 and higher only) 0 = 30 Sec 5 = 15 Minutes 1 = 1 Minute 6 = 20 Minutes 2 = 2 Minutes 9 = Infinity 3 = 5 Minutes (9 is on SN 60000 4 = 10 Minutes and higher only) DETECTION MODE (1-3) 1. 2. 3. Bidirectional Unidirectional Unidirectional With MTF Default = 2 (Unidirectional Approach) Default = 3 (Unidirectional with MTF) TYPE OF DETECTION (1-2) 1. Pedestrian & Vehicle 2. Pedestrian only IS-87 Default = 2 (Ped. Only) IS-87XL = 1 (Ped. And vehicle) REJECTION MODE (1-5) 1. Detects all traffic :pedestrian & vehicle 2. Detects all traffic + interference immunity 3. Low Pedestrian / Parallel traffic rejectiion 4. Mid Pedestrian / Parallel traffic rejectiion 5. High Pedestrian / Parallel traffic rejectiion IMMUNITY (1-3) (MOTION) 1. Extreme sensitivity 2. Normal sensitivity 3. Decreased sensitivity NOT USED NOT USED RESTORE DEFAULT SETTINGS (1) RESTORE DEFAULT SETTINGS (1) INFRARED SENSITIVITY (1-2) 1. Low gloss (high sensitivity) 2. High gloss (lNormal sensitivity) SET-UP (0-2) – see manual 0. Infrared – Learn Background 1. Normal mounting height (7-10’) 2. Higher mounting height (10-12’) *Passive output (Fail-Safe): NO-COM circuit is closed and NC-COM circuit is open ** Active output (Fail-Secure): NC-COM circuit is closed and NO-COM circuit is open. 75.0151 V5 July 2003
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 2 Title : Microsoft Word - 75.0151.05 Remote Control 20060903.doc Producer : Mac OS X 10.9.2 Quartz PDFContext Creator : Word Create Date : 2014:05:02 18:33:03Z Modify Date : 2014:05:02 18:33:03ZEXIF Metadata provided by EXIF.tools