BEST 40H Series Heavy Duty Mortise Locks 40Hseries WEB

User Manual: BEST 40H Series - Heavy Duty Mortise Locks Catalog

Open the PDF directly: View PDF PDF.
Page Count: 20

DownloadBEST  40H Series - Heavy Duty Mortise Locks 40Hseries WEB
Open PDF In BrowserView PDF
MORTISE LOCKSETS

40H SERIES
Heavy Duty Mortise Locks

TABLE OF
CONTENTS
FEATURES

TABLE OF CONTENTS

Page
Features..............................................................................................................2
Specification......................................................................................................3
Universal Lock Concept.............................................................................4-5
How To Order............................................................................................... 6-7
Special Features...............................................................................................8
Service Equipment..........................................................................................8

FEATURES..

7

4

5

2

6

9
40H
CUTAWAY

Page
Hand of Door....................................................................................................8
Mortise Sample Specification.....................................................................9
Functions...................................................................................................10-13
48H & 49H High Security Specification................................................ 14
48H & 49H Function & How To Order.................................................... 14
Standard & High Security Cylinders....................................................... 15

1.		Solid one-piece stainless steel anti-friction latch provides 50% more
surface contact with strike for superior strength and security. Reversible latch
rotates 180 degrees for easy handing change without opening case. 		
3
Precision-engineered curve provides enhanced cycle life with reduced wear to
the strike.
2.		Non-handed cylinder retainer.
3.		Armored front completely surrounds latch and deadbolt providing increased
lateral strength. Staked assembly design allows the armored .front to self-align
with the door bevel during installation.
8
4. Enhanced case integrity achieved through four case cover screws (one at 		
each corner), plus interlocking armored front and cover design at the latch.
1
5. Roller bearing hub mechanism provides smooth, wear resistant operation.
6. Locking toggle includes clear indication of “locked” and “unlocked” states.
7. 40H case, cover, and armored front manufactured from 0.095” cold rolled steel
for strength and durability.
8. Fusible link.
9. Four position hub toggle design determines whether each hub is always locked,
always unlocked, or locked by key for easy handing change .without opening
case.
10. Lever return spring mechanism located in trim for enhanced protection against
lever droop, providing a firm, positive return of the lever to the horizontal
position.
11. Self-aligning trim mechanism for fast, easy, and accurate installation.
12. Curved lip strike and strike box assembly provides an aesthetic, non-handed
solution to complement field reversible case.
13. Solid machined cylinder rings with wavy washer provides resistance to
wrenching of cylinder. Cylinder security screw prevents removal of cylinder
without first removing interchangeable core.
14. Visual indicator shows a padlock icon open for unlocked and padlock icon 		
closed and painted red for locked, as well as the visual indicator thumb-turn.
13 15. Non-handed stainless steel auxiliary bolt for ease of changing hand. (not shown)
unlocked
locked
12

11
10
6

2

40H
EXPLODED

Strike box & strike

HEAVY

14
Visual Indicators

DUTY

MO

ADA-Americans With Disabilities Act:
45H Series - The design and operation of the BEST® mortise lock
meets the intent of the standard for ANSI A117.1 section 404.2.6.
Builders Hardware Manufacturers Association:
45H Series - ANSI A156.13, Series 1000, Grade 1 Operation and
Strength, Grade 2 Security. To meet Grade 1 Security, a drill resistant
core (1CD, 1CDP, 1CDF, or 1CDX) must be used with escutcheon
trims, and 1E7K4 high security cylinder must be used with sectional
trims.
47H Series - ANSI A156.13, Series 1000, Grade 1 Operational,
Strength, and Security.
Underwriters Laboratories®
The 40H series is listed by Underwriters Laboratories for use on a
3 hour A label doors. These locks also carry the C-UL mark which
is officially accepted in all of Canada, indicating compliance with
appropriate Canadian standards and codes. The 47H series locks
conform to UL437 standard for key locks, referencing door locks.
The 1E7J4 cylinder used in the 47H series also conforms to UL437
standard for key locks, referencing high security cyl­in­ders, and is
listed for Canada as well as the United States.
Florida Building Code (FBC) Listed and Miami-Dade County Code
Compliance Office
See certification listing for all 40H series lock functions that are
certified for use in applications requiring a design pressure rating
as specified.
Description
PSF w/o DeadBolt
PSF w/ DeadBolt
PSF w/ DeadBolt

Model

Single Door

45H and 47H
45H and 47H
48H and 49H

+-60
+-100
+-50

Double
Door
+-35
+-50
+-50

The 40H series lock has received a notice of acceptance from
Miami-Dade County and is considered Miami-Dade County
product. “WS” option must be ordered for the lock to include
a “Miami-Dade County Product Control Approved” label for
inspection purposes.
Auxiliary bolt: Stainless steel, non-handed.
Backset: 2 3/4”
Case: 0.095” cold rolled steel, 5 7/8” H x 7/8” D x 4 1/16” W. Steel is zinc
dichromate plated for corrosion protection.
Deadbolt: Stainless steel, 1” throw.
Latchbolt: Solid stainless steel, 3/4” throw. Latch is oil-impregnated
for anti-friction operation. Reversible without opening case.
Strike: For complete strike package spec’s see page 5.
Door Thickness: Standard lock configuration designed for doors 1
3
/4” thick. Thick door configuration available for doors up to 5” thick
(specify thickness when ordering).
Faceplate: Stainless steel, brass or bronze material, 8” H x 1 1/4”
W x 1/16” T. Lock face automatically adjusts to proper bevel during

ORTISE

Finishes:
• 605 – bright brass, clear coated
• 606 – satin brass, clear coated
• 611 – bright bronze, clear coated
• 612 – satin bronze, clear coated
• 613* – oxidized satin bronze, oil rubbed
• 618 – bright nickel plated, clear coated (brass base material)
• 619 – satin nickel plated, clear coated (brass base material)
• 622 – flat black coated (brass base material)
• 625 – bright chromium plated (brass base material)
• 626 – satin chromium plated (brass base material)
• 629 – bright stainless steel
• 630 – satin stainless steel
• 690* – dark bronze coated (brass base material)

SPECIFICATIONS

SPECIFICATIONS

*613 finish is designed to wear over time, providing an “antique” appearance.
690 finish will continue as a dark brown appearance over time.

Antimicrobial Finish
• 626AM – satin chrome plated with UltraShield™ UltraShield™
antimicrobial protected coating
• 630AM – satin stainless steel with UltraShield™
antimicrobial protected coating
The Stanley Security Solutions UltraShield™ finish inhibits the growth
of bacteria and other microbes on the surface of the hardware.
NOTE: Stanley’s UltraShield™ option is recommended for use on any hardware
application where product cleanliness is a high priority. i.e;. Hospital/Healthcare,
Elderly Care, Education, Transportation, Food-Service, Hospitality.

#4 Knob: Diameter – 2 1/8” ; Projection on door – 2 7/8” Material
machined from solid brass or bronze.		
Decorative and Special Order Lever Handles: Stainless 		
steel base material with applied finish.
Standard Lever Handles: Brass, bronze, or stainless steel base
material for standard lever designs. Lever styles #3, #14, and #15
return to a minimum of 1/2” of door surface. Lever styles #3 and #14
conform to California Titles 19 and 24. Lever styles 12, 16 and 17 do
not return. Levers project 2 15/16” from door surface with H, J, R and S
trim. Levers project 3 1/64” with M and N trim.
Roses: Wrought brass, bronze, or stainless steel base material.
H – Flat w/ round edge, 2 3/4” diameter.
R – Contoured w/ round edge, 2 3/4” diameter.
S – Flat w/ beveled edge, 3 1/2” diameter.
Escutcheons: J – Wrought brass, bronze, or stainless steel base
material, 7 1/2” H x 2 9/32” W x 17/32” T. M & N – Forged brass or bronze,
8” H x 2 1/8” W x 37/64” T, through bolt mounted (no exposed screws
outside). M – Standard cylinder; N – Concealed cylinder.
Vandal Trim: VT–Vandal trim is available in standard finish for H, J,
M, N, R, and S trims in either #14 or #15 levers.
NOTE: Not available in single or dummy trim functions. If compliance to California
Building Code Title 19 & 24 is required, the #14 lever design must be specified.

Visual Indicators:
VIN–Visual indication uses an unlocked padlock or locked padlock
image with red background to indicate lock state.
VIT–Visual indication uses a thumb-turn with color coded locked and
unlocked icons – red indicates door is secure and green indicates
door is unsecure.

LOCKS

3

UNIVERSAL LOCK

UNIVERSAL LOCK DESIGN CONCEPT

Strength, Durability…and now Flexibility.
Sure, a mortise lock is one of the strongest and longest
lasting locks available. But who says it has to be the
most complex to order and install? When designing the
40H mortise lock, BEST® decided to focus on things
that would make the lock easier to use, while at the
same time maintaining the strength, durability, and
dependability you would expect in a BEST® mortise
lock.
In addition to the ability to quickly change the lock handing, the universal case design of the 40H provides the ability to reconfigure a lock
into many different functions easily and quickly, often by rearranging existing parts without disassembling the lock case. The efficiency of
the design enables over 12 of the most commonly used lock functions to be included in just 3 case configurations.

FLEXIBILITY IN ORDERING

The 40H provides the ability to postpone decisions on how the lock will be configured all the way up to the point of installation, making it one
of the most flexible and user-friendly mortise locks available. This translates into value for anyone involved in the process, whether they’re
an architect, specification writer, distributor, or end-user.
FLEXIBILITY IN ORDERING

Stanley/BEST offers three ways in which to order the 40H mortise lock. YOU get to choose which method meets your needs.
Function Specific Lock
If you know exactly what you need in a mortise lock, and are confident that your needs won’t change, then order your 40H locks in the
traditional way by specifying the exact function, trim, finish, and handing. BEST® will build the locks to work exactly as specified, so they may
or may not have the ability to be converted to another function in the future.
Universal Lock
If you want to keep your options open, this method of ordering
the 40H is for you. BEST® has developed three “universal”
functions that can be configured to a variety of common
functions, all without opening the lock case. When any of the
universal functions are ordered as a complete lock, all the
necessary parts (including trim) are provided to configure
any of the functions in that group.

UNR
A – office
AT – office
D – storeroom
N – passage
NX – exit
R – classroom

ANSI
F04
F04
F07
F01
F31
F05

UNT
L – privacy
T – dormitory

ANSI
F19
F13

UNAB
AB – office
TA – dormitory
TD – dormitory

ANSI
F20
F12

FOUR-PART LOCK

Outside
Kit
Inside
Kit

Case
Only

4

For the maximum flexibility in ordering a mortise lock, BEST®
provides a way to order your 40H lock in four parts: Inside Trim,
Case Only, Outside Trim and Strike Packages. The kits that make
up these four parts have been carefully designed so that when all
three are combined you have everything found in a complete 40H
lock. This order method is ideal for customers wanting to stock a
variety of trim designs with a minimal number of lock cases.

Strike
Package

HEAVY

DUTY

MO

ANSI

Parts Ordering Made Easy
No more searching through service manuals or calling technical
support for the right part numbers. BEST® has developed a variety
of kits you can order when you only need part of a 40H mortise,
rather than the whole lock.

F04
F20
F04
F21

Case Only
A Case Only lock includes all parts normally included with a
complete lock that are not specifically associated with either
the inside or outside trim, including: lock case, face plate, strike
and strike box, fasteners (for case and strike), and installation
instructions.
Case Only mortise locks will be shipped in the standard 		
mortise packaging, allowing trim kits to be included at a 		
future date to make a complete lock.

F08/F10
F09
F07
F14
F15
F15
F34
F33
F32

Trim Kit
A 40H Trim Kit is simply one half of a complete trim package. An
Outside Trim Kit must always be matched up with an Inside Trim
Kit to operate with a lock. Each kit includes all the necessary parts
(including fasteners) required for installation that are associated
with just the one side of the door.
Lever Set
A lever set kit provides the inside lever assembly (with set screw)
and outside lever assembly (with spindle attached). Thick Door
and Tactile Lever options are available for this kit.

45H/47H
1DT
2DT
A
AB
AT
B
B5
B7
BA
BW
C
CHB
D
G
H
HJ
INA
IND
INL

F30
F17
F29
F16
F18

Strike Packages
S1 – Standard strike:
4 7/8” x 1 1/4” x 3/32”, non-handed,
curved lip, 1 1/4” lip to center strike.
Fits standard door frame ANSI A115.1,
and comes with plastic strike box.

S1 – Standard strike
S5 – Latchbolt-only strike:
4 7/8” x 1 1/4” x 3/32”, handed, curved lip,
1 1/4” lip to center strike. Fits standard
door frame ANSI A115.1, and comes
with wrought steel strike box.

Screw Kit
Nothing’s more frustrating than spending time searching for the
part number of a single screw. With the 40H Screw Kits, you don’t
have to worry about that anymore. These kits have been designed
to provide all the necessary fasteners for one lock in a single bag.
All you need to know is the trim style and finish, and you’re set.
Security head screws are an option for this kit.

ORTISE

F01
F31
F05
F06
F35
F13
F12

45H/47H
L
LB
LT
N
NX
R
RHB
S
T
TA
TD
W
AD
RD
WD
YD
UNR
UNT
UNAB

STRIKE PACKAGES

Faceplate Kit
Face Plate kit includes a finished faceplate and the appropriate
screws. Security Head screws are an option for this kit.
Replacement Spindle
As a security feature, the outside spindle on the 40H is designed
to twist off during abuse before any internal damage to the
lock occurs. The Replacement Spindle kit is a quick, easy, and
inexpensive way to replace any spindles damaged by attack or
abuse. This kit includes the inside and outside spindles, plus the
pin to attach the outside lever.

ANSI
F19
F02

UNIVERSAL LOCK CONCEPT

FUNCTION LETTER CHART

S5 – Latchbolt-only strike
S6 – Latchbolt/Deadbolt strike:
4 7/8” x 1 1/4” x 3/32”, handed, curved lip,
1 1/4” lip to center strike. Fits standard
door frame ANSI A115.1, and comes
with wrought steel strike box.

S6 – Latchbolt/Deadbolt

LOCKS

5

HOW TO ORDER

HOW TO ORDER: 45H
45H
7
R
14
Series
Core
Function Code
Lever
Housing
Style
45H–
0– non 		 A– office
Standard Levers:
standard
keyed or D– storeroom 3– solid tube/return
mortise lock dummy 		 L– privacy
12– solid tube/no return
trim
N– passage
14– curved return
7– 7 pin R– classroom
15– contour/angle return
housing T– dormitory
16– curved/no return
accepts 		 etc.
17– gull wing
all BEST
cores
Knobs:
4– round

H
Trim
Style
3
H– 2 /4” dia.
R– 2 3/4” dia.
S– 3 1/2” dia.
J– wrought
M– forged
N– forged
(concealed cyl.)

626
Finish

RH
Door
Hand
RH
RHRB
LH
LHRB

618 626
630 690

Satin

606 612
613 619

Bright

605 611
622 625
629

Antimicrobial
626AM
630AM

pages 14-17

page 3

HOW TO ORDER: 47H
47H
7
R
14
Series
Core
Function
Lever
Housing
Code
Style
Standard Levers:
47H– lever / 7– 7 pin
A– office
knob high housing, D–storeroom 3– solid tube/return
security
must use R–classroom 12– solid return no return
mortise lock 5C cores 		 T– dormitory 14– curved return
15– contour/angle return
and long 		 etc.
16– curve/no return
blade keys
17– gull wing

LL– lead lined
SH– security head screws
Thick Door– (specify

thickness if other than1 3/4” )
TAC– tactile lever/knob
7/8 LTC– 7/8” lip-to-center
strike
VIN*– visual indicator
S1– standard strike
S5– latchbolt-only strike
S6– latchbolt/deadbolt strike
VT– vandal trim
VIT– visual indicator thumbturn

page 8

M
626
RH
Trim
Finishes
Door Hand
Style
RH
626
H– 2 3/4” dia.
RHRB
630
R– 2 3/4” dia.
LH
S– 3 1/2” dia.
M– forged Antimicrobial LHRB
626AM
630AM

Knobs:
4– round
pages 14-17
* These options may not be immediately available.

Options

Options

K– non UL cylinder
LL– lead lined
Thick Door– (specify thickness if
other than 1 3/4” )

TAC– tactile lever/knob
7/8 LTC– 7/8” lip-to-center strike
VIN*– visual indicator
S1– standard strike
S5– latchbolt-only strike
S6– latchbolt/deadbolt strike
VT– vandal trim

page 3

page 8

HOW TO ORDER: 45H CASE ONLY
45HCA
R
626
RH
Series
Function Code
Finishes
Door Hand
Options
605 606 611 612 RH
45HCA–
A– office
SH– security head screws
613 618
RHRB
case only mortise lock
D– storeroom
7/8 LTC– 7/8” lip-to-center
619 622 625 LH
strike
R– classroom
626 629 630 LHRB
T– dormitory etc.
690
pages 14-17

page 3

page 8

HOW TO ORDER: 40H TRIM KITS
40HTK
OS2
14
H
Series
Function Code
Lever/Knob Style
Trim
Backset
Style
40HTK–
IS1– inside lever only
Standard Levers:
H– 2 3/4” dia.
trim kit
IS2– inside lever x thumb turn
3– solid tube/return
R– 2 3/4” dia.
IS3– inside lever x cylinder
12– solid tube no return S– 3 1/2” dia.
IS4*– inside cylinder only
14– curved return
J– wrought
IS5– inside thumb turn only
15– contour/angle return M– forged
IS6– inside lever x cylinder x VIN
16– curve/no return
N– forged
(concealed cyl.)
17RH– gull wing right
hand
OS1– outside lever only
OS2– outside lever x cylinder
17LH– gull wing left hand
OS3– outside lever x emergency plate
OS4*– outside cylinder only
Knobs:
OS5– outside lever x VIN
4– round
OS6– inside lever x cylinder x VIN
NOTE: VIN– visual indicator
pages 14-17

page 3

626
Finishes
605 606
611 612
613 618
619 622
625 626
629 630
690

Options

D– double cylinder
Thick Door– (specify

thickness if other than 1 3/4” )
SH– security head screws
TAC– tactile lever/knob

page 8

* Only works with H, R, S, M and N trim.

6

HEAVY

DUTY

MO

HOW TO ORDER: 40H
1
626
Kit Number
Finishes
605 606 611
S1– standard strike
612 613 618
S5– latchbolt-only strike
619 622 625
S6– latchbolt/deadbolt strike
626 629 630
4– strike box only
690
page 4-5

40HLS
Series
40HLS–
lever set

STRIKE PACKAGES
Options

Thick Door– (specify thickness if other
than 1 3/4” )

7/8LTC– 7/8” lip-to-center strike
SH– security head screws

page 3

HOW TO ORDER: 40H LEVER SETS
1
626
Kit Number
Finishes
Options
605 606
Levers:
Thick Door– (specify thickness if other
3– solid tube/return
611 612
than 1 3/4” )
613 618
12– solid tube/no return
SH– security head screws
619 622
14– curved return
VT– vandal trim
625 626
15– contour/angle return
629 630
16– curve/no return
690
17RH– gull wing-right hand
17LH– gull wing-left hand

HOW TO ORDER

40HST
Series
40HST– strike
package

Knobs:
4– round
Decorative & special order levers:
pages 11-13

40HFP
Series
40HFP–
faceplate kit

page 3

page 3

HOW TO ORDER: 40H FACEPLATE KITS
3
626
Kit Number
Finishes
Options
605 606
0– AB
6– blank
SH– security head
screws
1– BW, TD, H, HJ
7– BA, S, TA 611 612
2– A
8– B, G, IND, L, 613 618
619 622
3– AT, D, C, INL, NX, R, W LB, T
4– N, LT
9– CHB, RHB 625 626
629 630
5– AD, RD, YD, WD
10– blank
(withoutlogo) 690
page 4-5

page 3

HOW TO ORDER: 40H REPLACEMENT SPINDLES
40HRS
3
Series
Function Code
Options
40HRS–
2– 40H split spindle (standard) Thick Door– (specify thickness if other than 1 3/4”)
replacement 4– 40H hook spindle *
spindle kits
page 3

*Hook spindle is available for 1 3/4” thick door only.

HOW TO ORDER: 40H VANDAL TRIM RETROFIT KIT
40HVTK
2
626
Series
Lever Style
Lever Style
Options
605, 606, 611, 612, 613 618 Thick Door– (specify thickness
40HVTK– vandal trim 14*– curved return
3
15–contour/anglereturn 619,622,625,626,629,630,690 if other than 1 /4” )
page 3
*Complies with California Building Code Title 10 and Title 24, part 12

HOW TO ORDER: 40H SCREW KITS
40HSK
1
626
Series
Kit Number
Finishes
Options
606
40HSK– screw kits 1– H, R. S, J trim screw kit
Thick Door– (specify thickness
612
if other than 1 3/4”)
2– M, N trim screw kit
613
3– special purpose fasteners screw kit
SH– security head
622
4– surface mounted trim screw kit
626
5– VIN trim screw kit
page 4-5

page 3

HOW TO ORDER: 40H VISUAL INDICATOR LAMINATE & THUMB-TURN
Part Description
Part Number
40H-VIT
626
Series
Finishes
Options
Indicator Laminate
605 612 613 626 Thick Door– (specify thickness if other than 1 3/4”)
Thumb-turn Indicator Kit
86329
40HVIT
Thumb-turn Escutcheon Indicator Kit
86829

ORTISE

LOCKS

7

SPECIAL FEATURES

SPECIAL FEATURES

Lead Lined Feature – The 40H mortise lock can be lead lined to protect against x-rays. Since the majority of lead lined doors contain the lead
in the surface of the door, the 40H provides lead lining for the holes cut in the door when preparing the door for the trim. The cylinder hole
is lead lined.
To order: des­ig­nate “LL” on order pro­ce­dure (page 6-7)
Security Head Screws – Security head screws.
To order: des­ig­nate “SH” on 45H/47H in order procedure (page 6-7).
Tactile Feature Knob/Lever – This option is for use in applications where special notice is needed to warn the blind about safety or
accessibility environments. Depending on the style ordered, the knob or lever will receive either grooves or knurling as the tactile feature.
To order: des­ig­nate “TL” on 45H/47H knobs/levers in order pro­ce­dure (page 6-7).
Visual Indicator Feature – This option adds a visual indicator for certain functions that visually reflects whether the lockset 		
is in the locked or unlocked state. This option is available for the following functions: TD– Dormitory, IND– Intruder, INL– Intruder,
L– Privacy, LT– Privacy, S– Storeroom. Visual indicator feature is standard on the H– Hotel function (page 2).
Vandal Trim – VT–Vandal trim is available in standard finish for H, J, M, N, R, and S trims in either #14 or #15 levers.

SERVICE EQUIPMENT

Note: Not available in single or dummy trim functions. If compliance to California Building Code Title 19 & 24 is required, the #14 lever design must be specified.

SERVICE EQUIPMENT

ED211 Mortise Cylinder Wrench –
The BEST mortise cylinder wrench and test handle is an essential dual-purpose tool.
It is used primarily to install or remove Stanley/BEST mortise cylinders without marring the
cylinder surface finish. The single end may be used to test the lock operation, as well as
aligning the throw pins.
To order specify: ED211 mortise cylinder wrench.
ED212 Mortise Cylinder Cam Assembly Tool –
Mortise cylinder cams are quickly changed with the use of this tool. Ap­prox­. length 1 3/4”.
To order specify: ED212 assembly tool.

ED211

ED221 Mortise Cylinder Thread Repair Die –
Tool for rethreading 1 5/32” diameter cylinders.
To order specify: ED221 thread repair die.
ED225 Hole Tap for 1 5/32” Mortise Cylinder –
Tap tool used to rethread housing threads for 1E Mortise Cylinders.
To order specify: ED225 hole tap.

ED212

KD316 Spanner Wrench (C54466) –
All “H” locksets require the use of the KD316 spanner wrench for door mounting.
This tool is include with every (10) locksets ordered.
To order specify: KD316 spanner wrench.

HAND OF DOOR

KD316

8

HAND OF DOOR

OUTSIDE
Left hand (LH)

OUTSIDE
Right hand (RH)

Left hand
re­verse bevel
(LHRB)

HEAVY

Right hand
re­verse bevel
(RHRB)

DUTY

MO

MORTISE SAMPLE SPECIFICATIONS

MORTISE SAMPLE SPECIFICATIONS
A. Locksets and Latch­sets:
[Best Access Systems.] - [___________.] [__________.]
1. Base Specification: Best Access Systems components as listed in Hardware Schedule per Article 3.05.
2. Locksets and latchsets of other acceptable manufacturers must conform to the requirements of Subparagraphs 3 and 4.
3. Mortise Type:
a. Locksets shall be tested and approved by BHMA for ANSI A156.13, Series 1000, Operational Grade 1, Extra-Heavy 			
Duty, Security Grade 2 and be UL10C
b. Locksets shall be mortise type with solid 3/4 inch throw one-piece radiused latchbolt made of self-lubricating stainless 		
steel. Deadbolt functions shall be one inch projection stainless steel construction. Both deadbolt and latchbolt to extend into lock case
with reinforcing a minimum of 3/8 inch when fully extended.
c. Knobs to be [_______] design.
Levers to be [_______] design.
d. Furnish locksets and latchsets with sufficient strike lip to protect door trim.
e. Provide locksets with 7 pin [BEST] interchangeable core cylinders. [All mortise cylinders shall have a concealed internal set screw for
securing the cylinder to the lockset. The internal set screw will be accessible only by removing the core from the cylinder body with a
control key]
f. All mortise locksets and latchsets must conform to ANSI A156.13, Series 1000, Operational Grade 1 [Security
Grade 2 for locksets in security areas] and be listed by UL. [High Security Option: All mortise locksets must conform to ANSI A156.13,
Series 1000, Operational Grade 1, Security Grade 1 and listed by UL, and must include inter changeable core cylinders which conform
to High Security Cylinder requirements of UL 437.]
g. Locksets must fit ANSI A115.1 door preparation.
h. Locksets and latchsets to have self-aligning through-bolted trim.
i. Locksets and latchsets must have the ability to change handing without opening case.
j. Auxiliary latch to be made of one-piece self-lubricating stainless steel.
k. Locksets must be available with tactile or knurled knobs or levers for identification of hazardous areas.
l. Lever handles must be of forged or cast brass, bronze or stainless steel construction and conform to ANSI A117.1.
Levers which contain a hollow cavity are not acceptable.

Subparagraphs m through r describe quality features of Best mortise locksets which may or may not be available from other lock
manufacturers. Edit accordingly.
m.[Spindle to be such that if forced it will twist first, then break, thus preventing forced entry.]
n. [Knobs and levers to be operated with a roller bearing spindle hub mechanism.]
o. [Permanent core face must be the same finish as the lockset finish.]
p.		Cylinder retaining screw, auxiliary latch, and strike must be non-handed.]
q. [Locking toggle on face of door must clearly indicate whether mortise lock is in the “locked” or “unlocked” state.]
r. [Cover and armored front must interlock at the latch, preventing the cover from spreading or bowing while under duress.]
Subparagraphs s through x describe quality features of Best mortise locksets which may or may not be available from other lock
manufacturers. Subparagraphs s, t, and u should remain as a group, and subparagraphs v, w, and x should remain as a group. Choose
either s-u or v-x, but not both groups.
s. [Mortise lock to offer a complete lock (including trim) with the ability to be configured in the field to any of the following
ANSI functions: F01, F04, F05, F07, F31.]
t. [Mortise lock to offer a complete lock (including trim) with the ability to be configured in the field to any of the following
ANSI functions: F19, F13]
u. [Mortise lock to offer a complete lock (including trim) with the ability to be configured in the field to any of the following
ANSI functions: F12, F20]
v. [Mortise lock to offer a multi-function case with the ability to be configured in the field to any of the following
ANSI functions: F01, F04, F05, F07, F09, F30, F31, F32.]
w. [Mortise lock to offer a multi-function case with the ability to be configured in the field to any of the following
ANSI functions: F13, F19, F33.]
x. [Mortise lock to offer a multi-function case with the ability to be configured in the field to any of the following
ANSI functions: F12, F15, F20]

ORTISE

LOCKS

9

40H SERIES – STANDARD LEVERS, KNOB & TRIMS

10

40H SERIES - STANDARD LEVERS, KNOB & TRIMS

Knob- 4
Rose - H

Knob- 4
Rose - R

Knob- 4
Rose - S

Knob- 4
Escutcheon - J

Knob- 4
Escutcheon - N

Lever- 3
Rose - H

Lever- 12
Rose - H

Lever- 14
Rose - H

Lever- 15
Rose - H

Lever- 16
Rose - H

Lever- 17
Rose - H

Lever- 3
Rose - R

Lever- 12
Rose - R

Lever- 14
Rose - R

Lever- 15
Rose - R

Lever- 16
Rose - R

Lever- 17
Rose - R

HEAVY

DUTY

MO

Lever- 3
Rose - S

Lever- 12
Rose - S

Lever- 15
Rose - S

Lever- 14
Rose - S

Lever- 16
Rose - S

Lever- 17
Rose - S

Lever- 3
Escutcheon - J

Lever- 12
Escutcheon - J

Lever- 14
Escutcheon - J

Lever- 15
Escutcheon - J

Lever- 16
Escutcheon - J

Lever- 17
Escutcheon - J

Lever- 3
Escutcheon - M

Lever- 12
Escutcheon - M

Lever- 14
Escutcheon - M

Lever- 15
Escutcheon - M

Lever- 16
Escutcheon - N

Lever- 17
Escutcheon - N

ORTISE

LOCKS

40H SERIES – STANDARD LEVERS, KNOB & TRIMS

40H SERIES - STANDARD LEVERS,KNOB & TRIMS

11

40H SERIES – DECORATIVE LEVERS

12

40H SERIES - DECORATIVE LEVERS

# 50

# 51

# 52

# 53

# 54

# 55

# 60

# 61

# 62

# 63

# 64

# 65

# 66

# 67

# 68

# 69

# 70

# 71

# 72

# 73

# 74

HEAVY

DUTY

MO

# 75

#76

# 77

# 78

# 79

# 80

# 81

# 82

# 83

# 84

#85

# 86

# 87

# 88

# 89

# 90

# 91

ORTISE

LOCKS

40H SERIES – DECORATIVE LEVERS

40H SERIES - DECORATIVE LEVERS

13

FUNCTIONS

FUNCTIONS
Function & Diag.
Description
ANSI No.
Latch operated by
Single Keyed
A-Office (F04)

AB-Office (F20)

AT-Office (F04)

Outside Lever or Knob
Deadbolt operated
Locked by
by

HJ-Hotel (F15)

Inside Knob/Lever
Locked by
Unlocked by
Cannot be locked

Always unlocked

Turning key in
outside cylinder
and placing locking
toggle in unlocked
position

Cannot be locked

Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch
• Turning inside lever,
• Rotating inside lever, N/A
• Turn key in outside
• Rotating outside lever
cylinder.
only when unlocked
by key or turn lever,
• Turning key in outside
cylinder.

• Turning inside turn
lever,
• Turning key in
outside cylinder.

Cannot be locked

Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch
Always locked
• Turning key in outside
cylinder.

Cannot be unlocked

Cannot be locked

Always unlocked

Cannot be unlocked

Cannot be locked

Always unlocked

• Rotating inside lever, N/A
• Rotating outside
lever– only
when locking
toggle is in unlocked
position,
• Turning key in outside
cylinder.

Placing locking toggle Placing locking
in locked position
toggle in unlocked
position

The latchbolt is deadlocked with an auxiliary deadlatch
• Placing locking toggle
• Rotating inside lever, • Turning key in
in locked position,
outside cylinder,
• Rotating outside
• Projecting dead-bolt
• Inside turn lever,
lever–only when
by key or turn lever.
locking toggle is in • Inside lever retracts
deadbolt and latch
unlocked 		
simultaneously.
position,
• Turning key in outside
cylinder.

D-Storeroom (F07) • Rotating inside lever, N/A

H-Hotel (F15)

Unlocked by

The latchbolt is deadlocked with an auxiliary deadlatch
• Turning inside turn Always locked
• Rotating inside
lever,
lever,
• Turning key in outside • Turning emergency
key in O/S cylinder.
cylinder.
(Rotating inside lever
retracts deadbolt and
latch simultaneously.)

The latchbolt is deadlocked with an auxiliary deadlatch. Throwing deadbolt blocks out all keys except “ER” key.
Cannot be unlocked Cannot be locked
• Rotating inside lever, • Turning inside turn Always locked
• Turning key in outside lever,
• Turning emergency
cylinder.
key in O/S cylinder.
(Rotating inside lever
retracts deadbolt and
latch simultaneously.)
The latchbolt is deadlocked with an auxiliary deadlatch. Throwing deadbolt blocks out all keys except “ER” key.
N/A
Turning key in outside Turning key in outside Cannot be locked
cylinder
cylinder
lever,
• Rotating outside lever
only when unlocked
by key,
•Turning key in outside
cylinder.

R-Classroom (F05) • Rotating inside

RHB-Classroom
Holdback (F06)

The latchbolt is deadlocked with an auxiliary deadlatch
Turning key in outside Turning key in outside Cannot be locked
• Rotating inside lever, N/A
cylinder
cylinder
• Turning key in outside
cylinder,
• O/S lever except
when 		 locked by
outside key,
• Latchbolt held
retracted by turning
O/S key while holding
up I/S lever.

Always unlocked

Always unlocked

Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch

14

HEAVY

DUTY

MO

Description
Latch operated by

Outside Lever or Knob
Deadbolt operated
Locked by
by

Single Keyed (continued)
T-Dormitory (F13) • Rotating inside lever, • Turning key in out-

side cylinder,
• Rotating outside
• Inside turn lever,
lever—only when
deadbolt is retracted • Inside lever retracts
deadbolt and latch
• Turning key in out
simultaneously.
side cylinder.

TA- Dormitory (F12) • Rotating inside lever, • Turning key in

outside cylinder,
• Rotating O/S lever
only when locking • Turning inside turn
toggle is in unlocked lever. (Rotating
position and deadbolt inside lever retracts
deadbolt and latch
is retracted,
• Turning key in outside simultaneously.)
cylinder.

TD-Dormitory

Non-Keyed
L-Privacy (F19)

LT-Privacy

N-Passage (F01)

NX-Exit (F31)

Unlocked by

FUNCTIONS
Inside Knob/Lever
Locked by
Unlocked by

• Turning key in
outside cylinder,
• Turning inside
turn lever.

Cannot be unlocked
• Turning key in
outside cylinder,
• Turning inside
turn lever.
• Rotating inside lever.

Always unlocked

• Placing locking
toggle in locked
position,
• Projecting
deadbolt by key
or turn lever.

Cannot be locked
Turning key in
outside cylinder and
placing locking toggle
in unlocked position

Always unlocked

Cannot be unlocked

Always unlocked

• Turning inside turn Always locked
• Rotating inside
lever,
lever,
• Turning key in outside • Rotating inside lever
retracts deadbolt
cylinder.
and latch
simultaneously.),
• Turning key in outside cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch

Cannot be unlocked

• Turning inside
turn lever,
• Turning the
emergency key.

• Turning inside turn Cannot be locked
lever,
• Rotating inside lever
retracts latch and
dead-bolt si­mul­
taneous­ly,
• Turning the
emergency key.

Always unlocked

• Rotating inside lever, N/A
• Rotating outside lever
only when turn knob
is unlocked.

• Turning inside
turn lever,
• Turning the
emergency key.

Cannot be locked
• Turning inside
turn lever,
• Rotating inside lever,
• Turning the
emergency key.

Always unlocked

Rotating inside or
outside lever

N/A

Cannot be locked

Cannot be locked

Cannot be locked

Cannot be locked

Rotating inside lever

N/A

Always locked

Cannot be locked

Cannot be locked

Always unlocked

• Rotating inside lever,
• Rotating outside lever
only when deadbolt is
retracted.

• Turning the
emergency key,
• Turning inside turn
lever. (Rotating
inside knob/lever
retracts deadbolt
and latch
simultaneously.)

FUNCTIONS

Function & Diag.
ANSI No.

The latchbolt is deadlocked with an auxiliary deadlatch

ORTISE

LOCKS

15

FUNCTIONS

FUNCTIONS
Function & Diag.
Description
ANSI No.
Latch operated by
Double Keyed
*C-Public
Entrance (F09)

Outside Lever or Knob
Deadbolt operated
Locked by
by

• Rotating inside lever, N/A
• Rotating outside lever
only when unlocked
by key in inside
cylinder,
• Turning key in outside
cylinder only.

Turning key in inside
cylinder

Unlocked by
Turning key in inside
cylinder

Inside Knob/Lever
Locked by
Unlocked by
Cannot be locked

Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.

CHB-Holdback

Turning key in inside
• Turning outside key, N/A
cylinder
• Rotating outside lever
only when unlocked
by key in inside
cylinder,
• Inside lever,
• Latchbolt held
retracted by turning
inside key while
holding up on inside
lever.
The latchbolt is deadlocked with an auxiliary deadlatch.
G-Communicating • Latch operated from Turning key in outside Turning key in inside or
either side only
or inside cylinder
outside cylinder
(F14)
when the deadbolt is
retracted.

Turning key in inside
cylinder

INL-Intruder (F32) • Rotating inside lever, N/A
• Rotating outside lever
only 		 whenunlocked
by inside or outside
key,
• Turning key in inside
or outside cylinder.

Always unlocked

Turning key in inside or Turning key in inside or Turning key in inside or
outside cylinder
outside cylinder
outside cylinder

IND-Intruder (F33) • Turning key in inside • Turning key in outside Extendingthedeadbolt • Retracting the
or inside cylinder,
or outside cylinder,
• Rotating outside lever • Rotating inside
lever (Retracts the
when deadbolt is
deadbolt and latch
retracted,
• Rotating inside lever. simultaneously).

Cannot be locked

Cannot be locked

Always unlocked

Turning key in inside or Turning key in inside or Cannot be locked
outside cylinder
outside cylinder

Always unlocked

by turning key
in inside or outside
cylinder

deadbolt by turning
key in inside or
outside cylinder,
• Rotating inside
lever (Retracts the
deadbolt and latch
simultaneously).

The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.
Cannot be locked
Always unlocked
• Retracting the
deadbolt by turning
deadbolt by
or inside cylinder,
or outside cylinder,
key in inside or
turning key
• Rotating outside lever • Rotating inside
outside cylinder,
in inside or outside
lever (Retracts the
when deadbolt is
• Rotating inside
deadbolt and latch cylinder
retracted,
lever (Retracts the
• Rotating inside lever. simultaneously).
deadbolt and latch
simultaneously).

INA-Intruder (F34) • Turning key in inside • Turning key in outside Extending the

The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.

*S-Storeroom (F35) • Rotating inside lever, Turning key in inside or Placing locking toggle Turning key in outside Extendingthedeadbolt Retractingthedeadbolt
• Rotating outside lever outside cylinder
only when locking
toggle is in unlocked
position and deadbolt
is retracted,
• Turning key in inside
or outside cylinder.

in locked position

cylinder or inside
cylinder and placing
locking toggle in
unlocked position

*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code®. In an emergency exit situation, failure to quickly
unlock the inside lever could be hazardous or even fatal.

16

HEAVY

DUTY

MO

Description
Latch operated by

Outside Lever or Knob
Deadbolt operated
Locked by
by

Double Keyed (continued)
*W-Storeroom (F30) Turning key in inside or N/A
outside cylinder

Always locked

FUNCTIONS
Inside Knob/Lever
Locked by
Unlocked by

Unlocked by
Cannot be unlocked

Alwayslocked

Cannot be unlocked

FUNCTIONS

Function & Diag.
ANSI No.

The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate
by master key only.

Deadlocks
AD-Deadlock (F17) N/A

RD-Classroom
Deadlock (F29)

N/A

N/A
• Turning key in
outside cylinder
• Turning inside turn
lever.

N/A

N/A

N/A

N/A
• Turning key in
outside cylinder
• Turning inside turn
lever.*

N/A

N/A

N/A

*Function RD–the inside turn knob retracts deadbolt but will not project it. (Specify hand of door.) Only for 1 - 3/4” doors.
Turning key in outside N/A
N/A
N/A
N/A
IYD-Deadlock (F18) N/A
cylinder only

WD-Deadlock (F16) N/A

Turning key in outside N/A
or inside cylinder

N/A

N/A

N/A

The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.

Special
XR-Classroom

• Rotating inside lever, N/A
• Turning key in outside
cylinder.

*XRHB-Classroom • Rotating inside
lever,
Holdback

N/A

N/A

N/A

Cannot be locked

Always unlocked

N/A

N/A

Cannot be locked

Always unlocked

Cannot be unlocked

N/A

N/A

•Turning key in outside
cylinder.
• Latchbolt held
retracted by turning
O/S key while holding
up I/S lever

*ZD-Storeroom

The latchbolt is deadlocked with an auxiliary deadlatch
Turning key in outside N/A
Always locked
cylinder

The latchbolt is deadlocked with an auxiliary deadlatch

*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code . In an emergency exit situation, failure to quickly
®

unlock the inside lever could be hazardous or even fatal.

ORTISE

LOCKS

17

48H/49H SPECIFICATIONS
48H/49H & FUNCTIONS

48H/49H SERIES-MORTISE DEAD­LOCKS

Specifications
Case: 0.095” cold rolled steel, 3 3/8” x 4 3/16” x 1”. Steel is zinc dichromate plated for corrosion
protection.
Faceplate: Brass or bronze material, 5 3/8” x 1 3/16” x 7/32” .
Strike: Brass, bronze, or stainless steel base material.
48HS1: Flat strike supplied standard, 3 1/2” x 1 1/8” x 3/32”
Fits standard door frame cut-out as specified in ANSI A115.5.
48HS2: Lipped strike supplied as option, 4 7/8” x 1 1/4” x 3/32”.
Fits standard door frame cut-out as specified in ANSI A115.1.
Backset: 2 3/4”
Door Thickness: Standard lock configuration designed for doors 1 3/4” thick.
Thick door configuration available for doors up to 3” thick
(specify thickness when ordering).
NOTE: “R” function not available for thick door.

Deadbolt: Stainless steel, 1” throw
Trim:
48H: Cylinder and trim ring only.
49H: M escutcheon supplied; refer to 47H specification for dimensions.
Finishes:
48H: Available in all finishes offered for 45H.
49H: Available in 626 only.

48H
Series

49H
Series

48H/49H FUNCTION CHART
Function & Diag.
Deadbolt operated by:
BHMA#
*K-Cylinder Deadlock • Rotating the inside thumb turn rosette,

Function & Diag.
BHMA#
*M-Cylinder Deadlock

Deadbolt operated by:
Turning the outside or inside key

• Turning the outside key.

EO6071
*L-Cylinder Deadlock

EO6061
*R-Cylinder Deadlock

Turning the outside key

EO6081

• Turning the outside key,
• Rotating the inside thumb turn
cylinder assembly retracts the deadbolt, but will
not project it.

EO6091

HOW TO ORDER

*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code®. In an emer­gen­cy exit situation, failure to quickly retract
the deadbolt could be hazardous or even fatal.
NOTE: Specify the hand of door when ordering. The R function deadlock can only be used on 1 3/4” thick doors.

18

HOW TO ORDER - 48H/49H SERIES
40H
7
K
S!
Series
Core Housing
Function Code

48H– standard 0–less cylinder (48H only) K– cylinder x turn
S1– flat strike (default)
49H–highsecurity 7–7-pin housing 48H
L– cylinder only
S2– ANSI strike
accepts all Best cores; M– double cylinder
49H only 5C cores; 49H– R– classroom
626 ONLY

cylinder x turn

626
Standard
Options
Finishes
48H–
48H: SH– security head
605 606
611 612 49H: K– non UL cylinder
613 618
619 625
626 690
49H–
626 ONLY

**Must specify key mark and number of keys or designate L/C for less core.

HEAVY

DUTY

MO

Standard 1E74 Mortise Cylinder
Designed for standard security applications, BEST® offers the 45H/48H mortise
locksets, utilizing the 1E74 mortise cyl­in­der and special interchangeable core.
Special cylinder vari­a­tions are avail­able for most ap­pli­ca­tions. Stanley/Best cyl­in­ders
are machined from solid brass or bronze bar stock. Ad­di­tion­al se­cu­ri­ty is pro­vid­ed by
a set screw that mounts di­ag­o­nal­ly into the cylinder wall. This set screw prevents
un­au­thorized re­mov­al of the cylinder with­out use of the control key.
1E74 Cylinder Specifications
Diameter: 1 5/32”. 1.150-32 (NS-2A) threaded mortise cylinder.
Length: 1 1/4”
Material: Brass or bronze.
1E74
Finish: Supplied to match mortise lockset trim (see spec­i­fi­ca­tions, page 3).
Standard Mortise Cylinder
Cylinder Ring: Wrench resistant ring with tension spring, machined from all brass or bronze.
Proper length automatically provided with lockset. For more ring information see cylinder catalog.
Cam: Proper cam provided for cylinder as required by designated function on order. Spe­cial cams available; see cylinder catalog section.

C293 Cam
O/S c and CHB Functions only
HIGH SECURITY CYLINDER

1E7J4 High Security Cylinder
Designed for high security applications, BEST® offers the 47H/49H mortise locksets,
utilizing the 1E7J4 high security cylinder and special 5C in­ter­change­able core. This
special cylinder is listed by Underwriters Lab­o­ra­to­ries as conforming to Standard UL437
for high se­cu­ri­ty cyl­in­ders. The patented cylinder provides ad­di­tion­al strength through a 		
hardened stainless steel alloy ring, face and keyway disc. It is available in most keyed functions
(All functions are certified to ANSI A156.13 Security Grade 1.) and is supplied only with “M” trim.
Cylinder also con­forms to ANSI A156.5 Mortise Cyl­in­der, Grade 1A.
NOTE: 1E7J4 must be combinated at factory to comply to UL437. 1E7K4 is combinated in the field and may be or­dered less core.

1E7J4
High Security Cylinder
1E7J4 Cylinder Specifications
Diameter: 1 5/32”. 1.150-32 (NS-2A)
		 threaded mortise cylinder.
Length: 1 1/16”
Materials: Brass and stainless steel.
Finish: Stainless steel base plated to match
		 626 finish.
Cylinder Ring: High security wrench resistant,
		 ma­chined from stainless steel, hardened.
		 Proper length automatically provided with
		 lockset. Special door preparation re­quired.
		 Diameter of hole 1 3/4”.
Cylinder Face,
		 Keyway Disc: Stainless steel, hard­ened.
		 Cam: Proper cam provided for cylinder as
		 required by designated function order.

HIGH SECURITY CYLINDER

Standard C258 Cam
All functions except 0/S C and CHB

STD. MORTISE CYLINDER

STANDARD MORTISE CYL­I N­D ER

NOTE: 1E7J4 requires long blade key for operation.

ORTISE

47H Mortise Lock
with #4 knob

LOCKS

47H Mortise Lock
with #14 lever
19

MORTISE LOCKSETS

Stanley Security Solutions, a business division of Stanley Black & Decker, is a provider of integrated access control and security solutions for institutional,
commercial and industrial businesses and organizations. Stanley Security Solutions delivers a comprehensive suite of security products, software and
integrated systems with a strong emphasis on service. Stanley Security Solutions is committed to extending its position as a leading comprehensive
resource for a broad and extensive array of solutions that span the entire security spectrum.
© 2014 Stanley Security Solutions, Inc.

www.stanleysecuritysolutions.com

BA-0012 • 11/14



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2015:06:22 12:08:48-04:00
Metadata Date                   : 2015:06:22 12:08:59-04:00
Modify Date                     : 2015:06:22 12:08:59-04:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:9c7a44fb-dedb-0048-854e-e7b1b7196b78
Original Document ID            : xmp.did:F239372108216811808390FCB26047CC
Document ID                     : xmp.id:bcd115cc-74b7-4148-95b3-bf86edd1efa7
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4d1f7ffd-2fd3-48d9-9abb-a39613e0bced
Derived From Document ID        : xmp.did:74B49EF53D206811808394487BC93A6A
Derived From Original Document ID: xmp.did:F239372108216811808390FCB26047CC
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:06:22 12:08:48-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CC 2014 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu