BEST 40H Door 4 Part.p65 Installation 45HW & 47HW Electrified Mortise Locks H15 T81163a
User Manual: BEST Installation 45HW & 47HW Electrified Mortise Locks Installation
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Series 45H & 47H 45HW & 47HW Backset 2 3/4” Trim style H, J, M, N, R, S Installation Template for 45H & 47H Mortise Locks and 45HW & 47HW Electrified Mortise Locks Door thickness 1 3/4” Rev date 7/2006 Title BEST ACCESS SYSTEMS Template number H15 Rev A To ensure accurate door preparation, use only factory-printed templates. Do not use copies or facsimilies. T81163/Rev A 1904683 ER-7991-42 July 2006 ■ ■ H Lever †† ■ ■ ■ O/S ■ ■ ■ ■ ■ ■ Through door Through door I/S O/S ■ ■ ■ ■ ■ ■ ■ ■ ■ Through door Through door I/S * Determine trim holes based on trim type. For trim outside only functions (such as ZD and ZR) and trim inside only functions (such as XD and XR), prepare surface mount trim holes on the trim side of the door as needed. † For 1DT, drill 7/64 in. (11 mm) holes halfway into the door at the centerpoints indicated. ‡ To qualify for the UL 437 high security listing, use the M escutcheon and the 1E7J4 cylinder. The 1E7K4 cylinder is available for use with either M trim or sectional trim, but does not qualify for the UL 437 high security listing. This option is not available for H and HJ function locks. †† Because these holes pass through the mortise pocket, it is recommended that each hole be drilled separately rather than straight through. J mounting screw (2 holes)* H & R trim visual indicator ■ ■ G Trim mounting (2 holes) †† ■ ■ ■ F thumb turn access Emergency key / ■ ■ ■ O/S Through door I/S ■ ■ O/S Through door Through door E mounting screw (2 holes) * H, R, & S trim thumb turn C Standard cylinder or D High security cylinder ‡ 1 49/64 in (44.8 mm) B J trim * G I/S G O/S 6 59/64 in (175.8 mm) Through door Through door 4 7/8 in (123.8 mm) I/S E O/S ■ ■ ■ ■ ■ ■ ■ Through door Through door I/S L, LB, LT, LEL, LEU J H O/S ■ ■ ■ ■ Through door Through door I/S N, NX, NXEL, NXEU C/D M & N forged trim A (2 holes) * H AD F AB, AT, B, BA, BW, HJ, T, TA, TD, TDEL, TDEU O/S ■ ■ Through door I/S O/S ■ Through door I/S YD A B Holes to drill A A, D, R, RHB, B5, DEL, DEU E Functions J C, CHB, G, IND, INL, S, W, B7, TWEL, TWEU, WEL, WEU, RD, WD O/S ■† ■ Through door † Through door † I/S 1DT, 2DT 1 Refer to the Holes by Function table and the figure below to determine the holes to be drilled for the lock function and trim combination. 2 Determine the inside and outside, hand, and bevel of the door. 3 Position one of the door edge templates on the door, making sure that the lock case mortise shown on the template aligns with the mortise pocket prepared in the door. Tape the template to the door. Note: For metal doors, see the H16 Template (T81166) or the H19 Template (T81611). 4 Using the centerlines on the door edge template as a guide, position the appropriate door template on each side of the door. You need to take the bevel into account. Tape the templates to the door. 5 Center punch the appropriate drill points. 6 Drill the holes. See the Installation Instructions for 45H & 47H Mortise Locks (T81162) or the Installation Instructions for 45HW & 47HW Electrified Mortise Locks (T81612). Note: For electrified locks that require concealed wiring, a 3/8” diameter channel through the door is required. Holes by Function Select, mark, and drill holes D Horizontal centerline of lock Horizontal centerline of lever Strike lip Detach here Strike lip Lock case mortise Hole Descriptions A M & N forged trim (2) B J trim (1) C Cylinder (1) D High security cylinder (1) E H, R, & S trim thumb turn mounting screw (2) F Emergency key / thumb turn access (1) G Trim mounting (2) H Lever (1) J H & R trim visual indicator mounting screw (2) Horizontal centerline of lever C J E F 1 1/4 in 32 mm 1/2 in 13 mm J E 1/8 in 3 mm C F 1 1/4 in 32 mm 1/2 in 13 mm G A H 7/8 in 23 mm G 3/8 in 10 mm J E 1/8 in 3 mm 1/8 in 3 mm Horizontal centerline of lock G H High edge (wide side) 3/8 in 10 mm 1 1/8 in 29 mm 1 3/4 in 45 mm J E 1/8 in 3 mm Horizontal centerline of lock Note: Use this template for the inside of a LH or LHRB door or the outside (keyed side) of a RH or RHRB door. For metal doors, see the H16 Template—Installation Specifications for 45H & 47H Mortise Locks (T81166) or the H19 Template—Installation Specifications for 45HW & 47HW Electrified Mortise Locks (T81611). Vertical centerline of lock D 1 3/4 in 45 mm 1 1/4 in 32 mm 7/8 in 23 mm G Vertical centerline of lever 3/8 in 10 mm Vertical centerline of lever Hole Descriptions A M & N forged trim (2) B J trim (1) C Cylinder (1) D High security cylinder (1) E H, R, & S trim thumb turn mounting screw (2) F Emergency key / thumb turn access (1) G Trim mounting (2) H Lever (1) J H & R trim visual indicator mounting screw (2) Horizontal centerline of lever Lock case mortise Strike lip 1 1/8 in 29 mm 3/8 in 10 mm Low edge (narrow side) Detach here High edge (wide side) A B Align to edge of door. 5/8 in 16 mm Strike lip A B Low edge (narrow side) 1 1/4 in 32 mm 5/8 in 16 mm Detach here Align to edge of door. Horizontal centerline of lock Horizontal centerline of lever Note: Use this template for the inside of a RH or RHRB door or the outside (keyed side) of a LH or LHRB door. For metal doors, see the H16 Template—Installation Specifications for 45H & 47H Mortise Locks (T81166) or the H19 Template—Installation Specifications for 45HW & 47HW Electrified Mortise Locks (T81611). A To ensure accurate door preparation, use only factoryprinted templates. Do not use copies or facsimilies. Vertical centerline of lock
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : PageMaker 6.5 Modify Date : 2007:04:12 09:52:56-04:00 Create Date : 2007:04:12 09:52:56-04:00 Format : application/pdf Title : 40H Door Template 4 Part.p65 Creator : VJR0404 Producer : Acrobat Distiller 8.0.0 (Windows) Document ID : uuid:14b91cb2-b396-4947-ab19-daf9bd7975e2 Instance ID : uuid:a525f394-0f8e-4c33-a287-2b440c07f57f Page Count : 2 Author : VJR0404EXIF Metadata provided by EXIF.tools