BI orporated TAD001 The BI TAD (Transdermal Alcohol Detector) User Manual TAD Officer s Reference Guide

Download:
Mirror Download [FCC.gov]
Document ID	1104476
Application ID	eUh0AaLmC4KRkA7nXoo+vA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.98kB (412284 bits)
Date Submitted	2009-04-30 00:00:00
Date Available	2009-04-30 00:00:00
Creation Date	2009-04-20 18:04:38
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-04-20 18:34:44
Document Title	TAD Officer's Reference Guide.book
Document Creator	FrameMaker 7.2
Document Author:	lpalmer

BI TAD
™
Officer’s Reference Guide
© 2008 BI Incorporated
8-90-00130-0
Revision A
ii
8-90-00130-0, Revision A
BI TAD Officer’s Reference Guide
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Trademarks and Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii
Waste Electrical and Electronic Equipment (WEEE)
. . . . . . . . . . . . . . . . . . . . . . . viii
United States FCC, Part 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
United States FCC, Part 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Industry Canada Certification
viii
ix
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Operation and EME Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electromagnetic Interference/Compatibility
ix
................................ x
Operational Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Overview
.............................................................1
Product Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BI TAD Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BI HomeBase Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Common Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 2 The TAD Alcohol & Curfew Monitoring Device . . . . . . . . . . . . . . . 7
Features
....................................................................... 7
Alcohol Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Alcohol Detection Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Water Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electronic Tamper Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Strap Tamper Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
72-Hour Count-Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Proximity Tamper Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Motion Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Skin Contact Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Infrared Debris Buildup Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
False Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Improper Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Poor Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8-90-00130-0, Revision A
iii
Contents
BI TAD Officer’s Reference Guide
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
TAD Unit Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Installation & Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Removing the TAD Unit
14
15
15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Water Reservoir Replacement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
Chapter 3
The HomeBase Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Equipment Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BI HomeBase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HomeBase +Cellular. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cellular Signal Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Receiver Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alcohol Monitoring Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alcohol Data Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Variable Leave Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Loss Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Loss Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cell Loss Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Callback & Missed Callback Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tamper Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Progressive Annoyance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
20
21
22
22
22
23
23
23
24
24
24
24
25
25
25
26
Telephone Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone Usage Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
Voice Over Internet Protocol (VoIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
Range Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Equipment Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
iv
27
27
29
8-90-00130-0, Revision A
BI TAD Officer’s Reference Guide
Out of Range Alarm
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
48-Hour Backup Battery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Bulk Downloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Guest Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Receiver Connectors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installation and Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Placement Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installing with Cellular Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing with Phone Line Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Removing the HomeBase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Appendix A Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TAD FAQs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
HomeBase Receiver FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Appendix B Troubleshooting
Appendix C Event Messages
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Appendix D Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8-90-00130-0, Revision A
Contents
vi
BI TAD Officer’s Reference Guide
8-90-00130-0, Revision A
BI TAD Officer’s Reference Guide
Preface
BI TAD Officer’s Reference Guide
Copyright © 2008 by BI Incorporated
All Rights Reserved
Printed in USA
BI prepared this manual for use by BI customers only. All comments concerning the contents
of this manual should be directed to BI’s Marketing Department, 6400 Lookout Road,
Boulder, CO 80301, USA. No part of this work covered by copyright may be reproduced in
any form whether graphically, electronically, or mechanically; including photocopying,
recording, taping, or storage in an information retrieval system without prior written
permission from BI.
Trademarks and Patents
The following are registered trademarks of BI Incorporated:
™
BI
™
BI HomeBase
™
BI logo
™
BI Sobrietor
™
BI TAD
™
BI Sobrietor Cellular
™
BI ExacuTrack
Technical Support
For technical support when using BI’s monitoring center, contact the BI GuardCenter:
BI GuardCenter
800 Main Street, Suite 501
Anderson, Indiana 46016
1‐800‐666‐3145
FAX 1‐765‐649‐3148
For technical support when using an agency monitoring center, contact BI Incorporated:
BI Incorporated
6400 Lookout Road
Boulder, CO 80301
1‐800‐241‐9924
8-90-00130-0 Revision A
vii
Preface
BI TAD Officer’s Reference Guide
Waste Electrical and Electronic Equipment (WEEE)
All electrical products that reach the duration of their functioning capabilities must be
returned to BI Incorporated for recycling.
United States FCC, Part 68
Compliance statement ‐ This equipment complies with Part 68 of the FCC rules. On the
bottom of the receiver is a label that contains, among other information, the FCC registration
number and ringer equivalence number (REN) for this equipment. If requested, this
information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the
telephone line. Excessive RENs on the telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all areas, the sum of the RENS should not
exceed five (5.0). To be certain of the number of devices that may be connected to the line, as
determined by the total RENs, contact the telephone company to determine the maximum
REN for the calling area.
The receiver connects to the telephone network with a USOC RJ11C jack. An FCC compliant
telephone cord and modular plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68 compliant.
If the receiver causes harm to the telephone network, the telephone company will notify you
in advance that a temporary discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company may provide advance notice in order for you to make the necessary modifications to
maintain uninterrupted service.
If complications are experienced with the receiver, please contact BI Incorporated. If the
equipment is causing harm to the telephone network, the telephone company may request
that you disconnect the equipment from the network until the problem is resolved.
There are no customer‐serviceable parts inside the receiver; however, power and phone cords
which connect to the receiver are replaceable.
Connection to party lines or to telephone company coin service is prohibited.
viii
8-90-00130-0 Revision A
BI TAD Officer’s Reference Guide
Preface
United States FCC, Part 15
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications made by the user to this equipment that are not expressly
approved by BI Incorporated could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and radiates radio frequency energy. If installed incorrectly and/or the
directions are not followed in accordance with the instructions, this equipment may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
™
Reorient or relocate the receiving antenna.
™
Increase the separation between the equipment and receiver.
™
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
™
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Certification
The equipment represented herein meets Industry Canada procedural and specification
requirements for certification. The certification identification number is displayed on the
equipment model identification plate prefixed by the acronym IC. The acronym “IC” only
signifies that Industry Canada technical specifications were met.
Operation and EME Exposure
The equipment represented herein is designed to comply with the following national and
international standards and guidelines regarding exposure of human beings to radio
frequency electromagnetic energy (EME):
™
United States Federal Communications Commission, Code of Federal Regulations; 47
CFR part 2 sub‐part J.
™
American National Standards Institute (ANSI)/Institute of Electrical and Electronics
Engineers (IEEE). C95. 1‐1992.
™
Institute of Electrical and Electronics Engineers (IEEE). C95. 1‐1999 Edition.
™
International Commission on Non‐Ionizing Radiation Protection (ICNIRP) 1998.
8-90-00130-0 Revision A
ix
Preface
BI TAD Officer’s Reference Guide
™
Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio
frequency Electromagnetic Fields in the Frequency Range from 3 kHz or 300 GHz,
1999.
™
Australian Communications Authority Radiocommunications (Electromagnetic
Radiation ‐ Human Exposure) Standard 2003.
™
ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) “Regulation of
the limitation of exposure to electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz.” “Attachment to Resolution 303
from July 2, 2002.”
Requirements for Exposure to Radio Waves
This equipment includes a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines that establish permitted levels of RF energy for standards that
were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. These standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic interference (EMI) if
inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
Medical Devices
If a person using this equipment also uses any personal medical device (i.e., pacemaker,
hearing aid, etc.), consult the manufacturer of the personal medical device to determine if it is
adequately shielded from RF energy. A physician may be able to assist in obtaining this
information.
Operational Warnings
There are certain areas where you want to avoid operation of any radio product.
Potentially Explosive Atmospheres
Turn off any radio product prior to entering any area with a potentially explosive
atmosphere unless it is a radio product type especially qualified for use as “Intrinsically
Safe” (for example, Factory Mutual, CSA, or UL‐approved). Do not remove, install, or charge
batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion
or fire resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres referred to above include fueling
areas, such as below boat decks; fuel or chemical transfer or storage facilities; areas
8-90-00130-0 Revision A
BI TAD Officer’s Reference Guide
Preface
where the air contains chemicals or particles, such as grain, dust, or metal powders;
and any other area where you would normally be advised to turn off your vehicle
engine. Areas with potentially explosive atmospheres are often but not always
posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off radio products when near
electrical blasting caps, in a blasting area, or in areas posted: “Turn off two‐way radio.” Obey
all signs and instructions.
8-90-00130-0 Revision A
xi
Preface
xii
BI TAD Officer’s Reference Guide
8-90-00130-0 Revision A
BI TAD
FCC Specifications & Product Installation
United States FCC, Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications made by the user to this equipment that are not expressly
approved by BI Incorporated could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and radiates radio frequency energy. If installed incorrectly and/or the
directions are not followed in accordance with the instructions, this equipment may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
™
Reorient or relocate the receiving antenna.
™
Increase the separation between the equipment and receiver.
™
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
™
Consult the dealer or an experienced radio/TV technician for help.
Installing TAD
The installation process for the TAD unit involves three separate steps:
™
Assembling the TAD unit
™
Sizing for proper fit
™
Attaching the TAD unit to the client
You will need both a standard and Phillips screwdriver to complete the installation. Discard
the hinge pins after each use. All other supplies are reusable and should not be discarded.
Keep in mind that the battery should be replaced after six months of continuous use.
Assembling
Before beginning to assemble the TAD unit, verify that you have the necessary parts:
Parts
™
4 Standard Screws
Proprietary & Confidential
FCC Specifications & Product Installation
™
Male Hinge
™
Female Hinge
™
Joint Pin
™
2 Locking Pins
™
Battery
™
Battery Hatch
™
Battery Cover
™
Adjustable Strap
™
Fixed Strap
™
2 strap clamps
™
Unit Case
BI TAD
 To assemble the TAD unit
1. Insert the battery into the battery well.
2. Place the battery hatch inside the battery well. Using a screwdriver, rotate the battery
hatch clockwise until the battery is secure.
3. Slide the battery cover over the battery hatch.
4. Slide the fixed strap into the fiber‐optic connection bay opposite of the charging port.
5. Slide the adjustable strap into the other fiber‐optic connection bay.
6. Using a Phillips screwdriver, secure the straps between the unit case and the strap clamps
with the provided screws. Place one screw into each hole, and rotate each screw
clockwise until you feel resistance.
7. Assemble the joint of the male and female hinges using the joint pin. Slide the joint pin
through the hinge loops until the joint pin is flush with the hinge assembly.
Sizing
Size the TAD unit while the client is standing. It must be installed on the narrowest part of
the bare ankle.
 To size the TAD unit
1. Wrap the adjustable strap around the client’s ankle and inside the fixed strap.
2. Wrap the fixed strap around the client’s ankle and on top of the adjustable strap.
3. Note the sizing number on the adjustable strap that is closest to the fixed strap. For an
accurate strap measurement, the absorption sensor must be firmly pressed against the
client’s ankle with a 50% depression into the absorption sensor cavity.
4. Remove the unit from the client’s ankle.
Proprietary & Confidential
BI TAD
FCC Specifications & Product Installation
5. Slide the male hinge into the sizing hole numbered three more than the number you
noted in step 3. For example, if you noted the strap sizing number 6 in step 3, you will
slide the male hinge into the strap hole numbered 9.
Attaching
When attaching the TAD unit to the client, keep the following requirements in mind:
™
The strap sizing numbers must face outward (away from the leg).
™
The TAD unit must be in the upright position (battery toward the bottom of the
ankle).
 To attach the TAD unit
1. Wrap the TAD unit around the client’s ankle as you did in step 1 of the previous section.
2. Align the male hinge with the fiber‐optic connector on the fixed strap. Press firmly on the
fixed strap to hold both straps in place.
3. Close the hinge assembly around the straps until the locking holes are aligned.
4. Slide a locking pin into both sides of the hinge assembly. The wing‐tipped ends of the
locking pins must be inserted first. The locking pins should be flush with the sides of the
hinge assembly.
Proprietary & Confidential
FCC Specifications & Product Installation
BI HomeBase
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and radiates radio frequency energy. If installed incorrectly and/or the
directions are not followed in accordance with the instructions, this equipment may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
™
Reorient or relocate the receiving antenna.
™
Increase the separation between the equipment and receiver.
™
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
™
Consult the dealer or an experienced radio/TV technician for help.
Installing the HomeBase
1. Place the HomeBase receiver in the selected location.
2. Plug the round connector of the power cord into the back of the receiver and plug the
other end into the wall socket.
3. Insert one end of the supplied phone cord into the wall jack and the other end into one of
the phone jacks on the back of the HomeBase. This step is not necessary when using a
cellular signal connection. Additionally, you can connect the client’s telephone to the
HomeBase by connecting the client’s phone cord to the unoccupied phone jack on the
back of the HomeBase.
NOTE: Do not use an extension cord unless absolutely necessary, and do not plug the receiver into an
outlet that is controlled by a light switch (the client or family member may accidentally turn
the switch off).
4. Use your officer key to turn the receiver power switch to the ON position.
Proprietary & Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:04:20 18:34:44-06:00
Create Date                     : 2009:04:20 18:04:38-06:00
Metadata Date                   : 2009:04:20 18:34:44-06:00
Creator Tool                    : FrameMaker 7.2
Format                          : application/pdf
Title                           : TAD Officer's Reference Guide.book
Creator                         : lpalmer
Document ID                     : uuid:dac77302-3d27-4cb8-83a6-958275d546cd
Instance ID                     : uuid:2813ef20-e70b-40cb-9db5-87d0f71f6511
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Has XFA                         : No
Page Count                      : 16
Author                          : lpalmer

EXIF Metadata provided by EXIF.tools